Configure the firewall on the esxi host 4

Similar Questions

• Displaying output on the ESXi host?

  It may be a stupid question but just wanted to be sure. I have ESXi running a desktop PC with a cluster of virtual machines configured. The PC has a screen attached to VGA. This means that I see the ESXi etc host configuration screen.

  I can remote into the MV from my computer laptop etc, no problem, but I would like to be able to use the screen. So is it possible to show a virtual machine on this screen, rather than the ESXi host / console?

  The short answer is no, this is not possible.

• Create new vCenter and move the ESXi hosts

  Hello

  I created a new vCenter vCenter apparatus using ISO 6.

  The deployment went well and I have all the installation program. I would now like to move hosts our old vCenter to new ESXi.

  I was reading this article to start the moving process.

  When I try to disconnect the host I get the message below

  

  In the article in the link above it is written that it will not affect the State of the virtual machine running on the host.

  If I click on 'Yes' here, it will automatically put the host in maintenance mode?

  I prefer not to do it if I can avoid it because I don't want to have to evacuate all virtual machines running on the esxi host.

  Wouldn't it be better if I disabled it HA first? Then try to move hosts? Or I'm sure to sign-out and the subsequent removal?

  Thank you

  See you soon

  Hello

  You must put your server in maintenance as a first step mode, then unplug and remove the server. It will work.

  If it doesn't work, disable temporary HA and remove your host of the VC.

• VM doesn't qutoboot upward after the restart of the ESXi host

  Hi all

  I environment, there is only a single Cluster. The Cluster has an ESXi host. all virtual machines including vCenter VM are resides on the ESXi host. When I reboot the host can all VM does not start?

  For comparison, there is a different environment, there are two Clusters (Cluster 1 and Cluster 2) in vCenter, Cluster 1 has two hosts ESXi Cluster 2 has only a single ESXi host. vCenter runs on the ESXi host residing in Cluster1.

  When I reboot the host residing in Cluster2, all virtual machines may start automatically.

  is that any expert can explain the difference? Why single environment can auto boot VMs when both of these environment has a host to the Cluster and cluster activate HA service?

  environments are executed at the ESX5.5.

  You will need to check the box allow VMS to start and stop automatically with the host system and then change the setting on the edit tab, and mention what needs to be done for each machine.

• Find the ESXi hosts that aren't in clusters

  How can I find the ESXi hosts that are not in the groupings using powercli?

  As always, there are several ways to do so.

  Try this one

  Get-VMHost |where{$_.ExtensionData.Parent.Type -ne "ClusterComputeResource"} |Select Name
  

• Add the model mv directly from the ESXI host

  Hi gentlemen,

  I have a question:

  Is it possible to add a model from the ESXI host without using VCENTER?

  I browse to the data store and I select Add to the broom, but I get an error.

  Sort of to reach it without using VCENTER?

  The models are a unique feature of vcenter. You can try renaming the vm vmxt vmx file, this would allow to add the file as a virtual machine, not model.

  But anyway, you will not be able to use to deploy from model or the options you have for cela vcenter.

• where to check the availability of the esxi host?

  vsphere 4.1 customer, where can I go to check the availability of the esxi host without going to the terminal of the esxi host?

  Hello

  You can find uptaime or ALL your ESXi servers in the data center in this way

  Click on the vCener Server (left site)--> hosts tab in the window on the right and on the right site, you will see availability for all guests

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Attempt vSwitch configuration change and now the ESXi host and virtual machines offline

  So I have no doubt, I have myself to blame for this one. I was trying to change my vSwitch from 100 Mbps to 1000 Mbps when an 'operation timed' error out jumps-to the top and my vCenter Server lost connection with my ESXi host. I tried to restart the host manually, but that did not help. The host is not the ping requests and all the virtual machines on that host are offline; None of them vMotion off to my other ESX Server.

  I tried to reconnect the host computer in vCenter, but it is obviously does not connect because it can't ping it. I logged the ESXi console and all the network settings appear to be correct. I'm used to connect to the ESX console where you can execute commands, but it's my first ESXi host, so I don't know what I can do.

  Any help is greatly appreciated!

  -D.

  If you had your management port and VMs on different vSwitches / NIC leave on framework would eliminate a false positive. As in your case the management port reportedly follows the cable / about speed, but the virtual machine network would be intact (and I'm assuming that your storage space as well).  In this case the VMs system would have worked very well even if the management port did not work.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Help: The ESXi host has no persistent storage

  We have an ESXI 5.0 installed on our Dell server and we have some virtual machines running. suddenly, we had a mistake on Vsphere client.

  "EXSI host has no persistent storage.

  To run the virtual machine, create at least a data store for the maintenance of the machines virtual and other system files. »

  to resolve this problem, so we tried.

  On Vsphere client (connected to the ESXI)-> configuration-> storage-> rescan all... once the re-scanner has been done.

  We are able to see the file was mounted on the data store and it is lost in a minute. so it isn't permanently mounted to the data store to access the virtual machine.

  Once we do the re-scan once again, we saw that the file has been fitted to the data store and lost again.

  assemble and disassemble is to continue to switch.

  We need a solution to fix the problem, or in the worst case we need a way to recover the Esxi machine (VMS) data.

  Kindly share the reflections.

  It should be a disk error, it is local storage that tempt you and the virtual machine files are stored in the local disk

  don't forget to check the logs on the bit/ucs, regardless of the remote management tool, you use...

  Please check the log files and vobd.log vmkernel

• New to ESXi - how ftp the ESXi host files?

  I read several threads on the FTP configuration for other machines to connect to the ESXi server. But I need to FTP my files of our Lacie enthernet disk backup (created with the ghettoVCB.sh). The ethernet disk is shipped XP that allows FTP connections to it.

  Can someone tell me how to FTP to the ESXi machine?

  Thank you!

  Charles

  Not sure ESXi 3.5, but on ESXi 4.0 there is a FTP client, as mentioned l to enter the busybox not supported console:

  ~ # vmware -v
  VMware ESXi 4.0.0 build-171294
  

  Ftpget function

  ~ # ftpget
  BusyBox v1.9.1-VMware-visor-654 (2008-12-17 10:01:32 PST) multi-call binary
  
  Usage: ftpget [options] remote-host local-file remote-file
  
  Retrieve a remote file via FTP
  
  Options:
          -c,--continue   Continue previous transfer
          -v,--verbose    Verbose
          -u,--username   Username
          -p,--password   Password
          -P,--port       Port number
  

  ftpput

  ~ # ftpput
  BusyBox v1.9.1-VMware-visor-654 (2008-12-17 10:01:32 PST) multi-call binary
  
  Usage: ftpput [options] remote-host remote-file local-file
  
  Store a local file on a remote machine via FTP
  
  Options:
          -v,--verbose    Verbose
          -u,--username   Username
          -p,--password   Password
          -P,--port       Port number
  

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• One of the ESXi host 3 no HW Compatible for ESXi 6 upgrade?

  Hello

  There are 3 DELL servers (2 of them are running R530 and 1 is executed R900).

  When attempting to upgrade these 5.5 ESXi hosts to ESXi 6, we find that the R900 is no longer supported.

  Wonder what is the best way for us to do - keep using ESXi 5.5 or level 2 of them to ESXi 6 and leave remaining on an ESXi 5.5?   We have no intention to replace the R900 in the near future.

  Thank you

  If all three hosts are part of the ESXi Cluster, then you must do all the guests at the same version level. Therefore, keep all the on ESXi 5.5

  But if you use these host as a standalone ESXi host then you can upgrade the host to ESXi 6 two and let R900 on ESXi 5.5

  Thank you

  Hentzien

  Virtual Admin

• How to determine the esxi host installation date

  I need to write the installation date of the host all, is it possible to determine the date of installation.

  We use following command to get the host esxi installation date,

  echo - n "ESXi install date:"; " day d @$ (printf "%d" x 0 $(esxcli system uuid get | cut-d \--f1))

  Reference: VMware KB: determination of the date of installation of an ESXi host

• Impossible to withdraw, migrate, etc., VM on the ESXi host

  Earlier, the room of my loss of cooling infrastructure hosting servers suffered vSphere causing several ESXi hosts to closure without notice due to excessive heat.  Needless to say that the results were chaotic.  While I recovered/restored most of the systems, a problem seems to persist.  It is a virtual machine that is impossible to remove, move, etc. due to locks on files active.  The option in the .vmx to "Add to the inventory" file in the data store is also disabled.  However, this virtual machine is not displayed with a "vim - cmd vmsvc/getallvms" command.  In fact, investigating the locks on files, it doesn't appear with a ' vmkvsitools lsof | grep VM_Name command"and no result back with a ' ps | grep VM_Name command.  The host in question has also been restarted and updated (5.1 update 2, Update 3) so a simple reboot does not clear the locks.  So, the question is; How can I get rid of this virtual machine so I can properly re - add to vCenter?  Any help would be appreciated.

  Then just do a kill-9 20156 and you are all set - this kill everyone and goes out by the force of the virtual machine and your hair will be free

• Update Manager upgrade of the ESXi host that he is running in a virtual machine does

  That is the question.  Here is some information.  We were a completely virtualized environment for several years.  2 guests ESXi collocated 5.5 to different data centers connected of course by a VPN site-to site.  The VPN itself is provided by VMs and vCenter runs in a VM to one of the sites as Update Manager is to proceed with installing it. If the vCenter and/or VPN VMs are down, we have a very cool backup method to gain access to and manage ESXi and its console.   Some of you who read the rest of the present will be tempted to suggest to architecting our environment differently, but we are very pleased with the way it is thank you very much :-)  Appreciate all the answers but really just responded to this specific question.

  The reason why we want to Update Manager is really just to be able to upgrade easily ESXi in the future without enter in the console and the execution of orders, etc.  I realize the documentation and blogs on this topic that ESXi may need to go into maintenance mode and stop the virtual machines running on it (not a cluster if no migration) how ESXi is lose connection to the Update Manager (if the remote host) or a stop Update Manager (if the local host).  So the question is, is that the process of updating managed by Update Manager an atomic operation at that crucial moment or a sequence of operations depend on continuous connectivity and control of Update Manager.  Ddoes ESXi, then perform the upgrade and restart regardless - that would be great - or he'll just stand there in maintenance mode to learn more about disconnected now / stop Manager update pending.

  Your answers are greatly appreciated.

  Please, tell me if I understand you:

  Ask yourself if you can upgrade the host running Update Manager VM? And you cannot migrate the virtual to another host machine because there is no cluster in place and no shared storage?

  If your answer is YES to both questions, I can tell you that you cannot use Update Manager, since you must put your host in Maintenance Mode and therefore you will need to stop all virtual machines running, including the VM Manager Update.

• The ESXi host upgrade, replicas linked clones

  I am trying to upgrade my 5.1 to 5.5 ESXi ESXi hosts.  I have some clone bound view pools and their replicas that has been created.  Given that these replicas are instant, they can be vmotioned.  What is the best method of upgrading a host ESXi replicas with snapshots on it? Just upgrade the host and let the lines where they are?

  Thanks in advance.

  From my experience every time you put the host in maintenance the replica mode is moved offshore to another host in the cluster.   You can then perform you upgrade with no problems.