Configure the weather application for Celsius on 23 tilt of HP Envy TouchSmart

Similar Questions

• What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages outside the home page.

  What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. Unfortunately, I lost a lot of these new applications. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages other than the home page. Thank you!

  'Stock' apps are part of the installation of iOS and cannot be removed, so there is nothing to verify or prove.

  When you move to a new phone, just need restoring your old backup phone and compatible applications will be synchronized to the new.

• How to stop the bridge.exe active as to install the new application for example. Flash CC?

  How to stop the bridge.exe active as to install the new application for example. Flash CC? Help, please?

  I can not install any new demand every time.

  Please see:

  http://helpx.Adobe.com/Creative-Suite/KB/error-installation-cannot-continue-bridge.html

  Kind regards

  Ashutosh

• How to configure the SMTP server for the osb 10.3.1

  Hi all
  
  Anyone can share information on how to configure the SMTP server for the osb 10.3.1
  and then how to send an email to OSB 10.3.1
  
  Thanks in advance!

  See this url:
  https://blogs.Oracle.com/christomkins/entry/sending_an_email_from_oracle_s

• How can I change the weather app for Fahrenheit to Celsius?

  My Weather app shows the temperatures in degrees Fahrenheit.  How can I change the Celsius?

  To change the temperature in Celsius,

  1. open the weather app.

  2 reveal options app by clicking right in the application, or by sliding upwards if you use a touchscreen device.

  3. in the lower right corner, press or click change to Celsius.

  Alternatively, you can change the setting by the charm of parameters:

  1. open the weather app.

  2. slide from the right edge or the mouse on the bottom right and then press or click on settings.

  3. and then tap or click the settings again.

  Under furniture, tap or click Celsius.

• doubt Doc ID 1618305.1 how to install and configure the user interface for content with WebCenter content 11.1.1.8.0

  doubt Doc-ID 1618305.1 How to install and configure the user interface with WebCenter content 11.1.1.8.0 content

  The portal_domain field contains;

  AdminServer (admin) and Enterprise Manager, (port 7001)

  IBR_server1, (port 16250)

  UCM_server1, (port 16200)

  WC_Spaces1, (port 8888).

  On the same machine, I have another weblogic, admin and for the ITS.

  The case is that continued to develop for the upgrade to the new skin WebCenter content.

  That's my goal.

  Then I did some research and came to the following notes in support.

  1 - how to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=290841671406625 & ID = 1618305.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_216

  and

  2 - update of the 11.1.1.8.0 UI content after you apply the Patch of Bundle WebCenter content 3 (MLR 3) or higher (Doc ID 1617477.1()

  https://support.Oracle.com/epmos/faces/DocContentDisplay?_afrLoop=291485823387355 & ID = 1617477.1 & _afrWindowMode = 0 & _adf. CTRL-State = c7eq7vwdt_245

  The UCM_server1 has the following House / app / oracle / Middleware / Oracle_ECM1 /.

  And the list of patches;

  ===================================================================================================

  Installed products of higher level (1):

  Oracle WebCenter content management install 11.1.1.8.0

  There are 1 products in this House of Oracle.

  Installed products (40):

  Cloning of the 11g Application Server 11.1.1.8.0 component

  Enterprise Manager Application Server Integrator Plugin - Management Service Support11.1.1.7.0

  FMW Control Plugin for Oracle inbound refinery 11.1.1.8.0

  FMW Control Plugin for Oracle WebCenter Capture 11.1.1.8.0

  Component install SDK 11.1.0.9.0

  Oracle Application Server Configuration 11.1.1.7.0

  Part of Oracle 11.1.1.7.0 Bali

  Oracle 11.1.1.8.0 capture

  Common files Oracle WebCenter content management 11.1.1.8.0

  Oracle Content Server 11.1.1.8.0

  Content of Oracle 11.1.1.8.0 Server component

  Content access Content Server Oracle 11.1.1.8.0

  Access to the contents of the Oracle Content Server 11.1.1.8.0 files

  Oracle Content Server Core 11.1.1.8.0

  Oracle 11.1.1.8.0 server content distribution

  Oracle extended Windowing Toolkit 11.1.1.7.0

  Oracle Fusion Middleware Admin Config 11.1.1.6.0

  Oracle Help for Java 11.1.1.7.0

  Oracle Help for the Web - UIX 11.1.1.7.0

  Oracle Help for the Web Shared Library 11.1.1.7.0

  Oracle Help share library 11.1.1.7.0

  Ice browser Oracle 11.1.1.7.0

  Oracle IRM                                                           11.1.1.6.0

  Oracle extended JFC Windowing Toolkit 11.1.1.7.0

  One-time correction of Oracle 11.1.0.9.9 installer

  Oracle outside in technology 8.4.0.0.0

  Oracle Remote Client of Intradoc 11.1.1.8.0

  Component of Oracle 11.1.1.7.0 rules

  Oracle SOA 11.1.1.7.0 workflow

  Universal Oracle install 11.1.0.9.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Oracle Upgrade Wizard 11.1.1.8.0

  Upgrade Oracle WebCenter content management 11.1.1.8.0 Assistant

  Oracle WebCenter Capture 11.1.1.8.0

  Oracle Webcenter content - rights 11.1.1.7.0 documentalist

  Oracle WebCenter content - Universal Content Manager 11.1.1.8.0

  Oracle WebCenter content management install 11.1.1.8.0

  Oracle WebCenter content 11.1.1.8.0 management product suite

  Oracle WebCenter content: Imaging 11.1.1.8.0

  OracleAS Documentation 11.1.1.8.0

  There are 40 products installed in this House of Oracle.

  Interim plates (2):

  Patch 18188143: applied the sea Mar 19 17:37:32 BRT 2014

  Patch ID: 17263162

  Created February 5, 2014, 12:56:41 pm

  Bugs fixed:

  15872313, 17184457, 17515691, 16633496, 14317920, 15991141, 16892410

  14071471, 17929776, 13414481, 16042293, 17018964, 17627211, 16768600

  16037162, 14521663, 17768056, 14738077, 16460053, 17567819, 17806416

  15905591, 16080297, 17569908, 17043756, 18139768, 17211093, 17805499

  16418434, 16828356, 16671687, 17039391, 16698130, 17943394, 17632731

  17560900, 14246603, 15941347, 16045712

  Location of patch in the inventory:

  / app/Oracle/middleware/Oracle_ECM1/Inventory/oneoffs/18188143

  Patch location in the storage area:

  /app/Oracle/middleware/Oracle_ECM1/.patch_storage/18188143_Feb_5_2014_12_56_41

  Patch 18088049: applied the sea Mar 19 17:35:58 BRT 2014

  Patch ID: 17182855

  Created February 16, 2014 20:35:48 hrs PST8PDT

  Bugs fixed:

  17919101, 17894065, 17884570, 17883868, 17883112, 17854549, 17835742

  17832305, 17819213, 17812338, 17789722, 17783376, 17778867, 17761746

  17740542, 17733871, 17698852, 17658821, 17642431, 17636186, 17622384

  17616664, 17616611, 17616489, 17613656, 17608703, 17589960, 17581458

  17574153, 17567413, 17565564, 17558210, 17558068, 17546505, 17545841

  17540480, 17528590, 17514070, 17511368, 17511271, 17511089, 17501678

  17500375, 17475733, 17449617, 17421368, 17417817, 17416821, 17416807

  17416771, 17416377, 17416343, 17402732, 17401071, 17401052, 17397875

  17393920, 17393892, 17369286, 17368525, 17368096, 17362858, 17362130

  17354877, 17353764, 17352746, 17335303, 17335290, 17330493, 17324707

  17323595, 17323038, 17317268, 17314494, 17313064, 17313052, 17313000

  17312990, 17312933, 17312863, 17312366, 17298386, 17295962, 17290804

  17285105, 17270986, 17261952, 17255019, 17219134, 17216119, 17206903

  17201035, 17200854, 17199763, 17187804, 17185539, 17171852, 17171818

  17164502, 17160600, 17153780, 17074852, 17050451, 17049175, 17026301

  17008220, 17007746, 17007534, 17006378, 16999307, 16999291, 16991380

  16980256, 16980207, 16980196, 16979042, 16961904, 16958142, 16954858

  16941623, 16936055, 16936048, 16936036, 16936020, 16936006, 16935987

  16935976, 16921682, 16908287, 16858148, 16815976, 16796213, 13931337

  17424037, 17006115, 17171834

  OPatch succeeded.

  ==============================================================================================

  And contains the following configurations in config.cfg

  ==============================================================================================

  SocketAddressHostSecurityFilter = 127.0.0.1 | 0:0:0:0:0:0:0:1 | 192.168.1. * | 10.62.1.79

  xPortalSecurityPropagate = true

  Web server = javaAppServer

  AllowUpdateForGenwww = 1

  SearchIndexerEngineName = OracleTextSearch

  IndexerDatabaseProviderName = SystemDatabase

  AdditionalEscapeChars = -: #.

  FileEncoding = UTF8

  MaxQueryRows = 2000

  DisableAuthorizationTokenCheck = true

  IntradocServerPort = 4444

  SchemaPublishInterval = 604800

  SSAllowDelayedProjectWrites = true

  IdcServerThreadQueryTimeout = 120

  DisableQueryTimeoutSupport = false

  MaxSearchConnections = 20

  #Cache

  UseSearchCache = false

  #

  #AdditionalEscapeChars = _: #, -: {-}, has: A, GOLD: GOLD, CAN: CAN, AND: AND at the END:

  # Accesing a content item on a mapped Web URL (WebUrlMap) fails with the error: "unable to retrieve the content. Security access denied» (Doc ID 1639028.1()

  MaxAccountsInSecurityClause = 300

  # end (Doc ID 1639028.1()

  #Search fails for external users in WCC after upgrade to 11.1.1.8.0 (Doc ID 1676468.1()

  DoCaseInsensitiveAcctSearch = false

  # end (Doc ID 1676468.1()

  #MigrationFormatForfApplicationGUID = dCollectionName:dCollectionGUID

  ==============================================================================================

  To my UCM_Server1 content WebCenter.

  As I already have a WebCenter content I have to follow the second part of the note

  How to install and configure the UI content with WebCenter content 11.1.1.8.0 and 11.1.1.9.0 (Doc ID 1618305.1).

  Install and configure content WebCenter ADF WebUI against WebCenter Content Server

  Step 1) install the MDS schema

  (Step 2), install the Weblogic Server

  11 GR 1 material step 3) DOWNLOAD and install Oracle Application Development Framework (11.1.1.6.0) in the new WebUI WLS Middleware House, found here

  Step 4) Download and apply Patch 16, 546 129.

  Step 5) Download and apply Patch 16, 546 157.

  Step 6) download and apply the Patch and then 19,469,801, 18,102,108 Patch

  Step 7) copy the wccadf files in the field of user interface

  Step 8) Oracle on demand services (MDS) metadata registry

  Step 9) Place the WebCenter content domain user interface model

  Step 10) run the Setup Wizard on the new home of Middleware WebUI to create the new domain

  Step 11) updated the Oracle ADF of shared libraries

  Step 12) start the domain WebUI administration server

  Step 13) Save target Managed Server with the MDS repository and create the metadata partition

  Step 14) start the server managed WebUI.

  Step 15) associate UI WebCenter content to Content Server.

  Step 16) reboot the WebUI ADF server managed.

  Step 17 access the WebUI

  Step 18) complete the Configuration of the workflow

  Step 19) apply the latest Patch Bundle content UI of WebCenter

  MY DOUBT IS:

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I'm not able to do with the WLS even where I UCM_server1 today?

  Thanks for all suggestions and criticism.

  To read the steps that I understood, to 19, with success, in the end, I will have an another WebLogic with a domain name and its respective EM.

  I have two servers weblogic?

  portal_domain (explained above) and a new wccui_domain wls and domain.

  This fix it?

  Two WLS to keep WebCenter portal and content, and other elements.

  Because I could not do with the WLS even where I UCM_server1 today?

  Yes, up to 11.1.1.9.0, you will need to install a new wls House (new wls server admin) and then configure WCC ui there. User interface and COE will not work in the same field. You can have the portal and content under the same House of wls and install a new one for the user interface.

  This is due to a problem with ADF and WCC libraries.

  With 12 c, this dependence is not there, and you can install / configure all 3 (Portal, content and adf ui) applications on the same domain.

• Remove the weather application

  I can't delete the 'Weather' (apparently provided by the Weather.Channel) app from my iPhone 6.  When I tap and hold the icon I don't get the x in the upper left corner as I do in most of the other icons.

  What weather app specifically you are trying to delete?

  This is the fault of Apple Weather app and cannot be deleted:

  

  It is the weather channel application and should be removed:

  

  If you do not get the in the corner, make sure you delete Apps than not in the settings-> general-> Restrictions

• Why the weather application does not meet the 3D touch after update in 9.3?

  I just downloaded the new update in 9.3 and I was under the impression that the weather app would be able to meet 3D touch, being that mine is not working the case.

  KIM I had the same problem. Apple said that I should do a restore. Blah blah blah.

  Bottom line, tactile 3d Weather app did not work. I deleted my save locations in App is weather. 3D touch works. I have readded my places. Still works.

  I hope thay works for you.

• Is it possible to configure the same user for 500 systems that run under XP & Win7?

  Hello

  About 500 systems are run under Windows XP & Windows7, is it possible to use the same user for all 500 systems?

  Hi SupportRI,

  Windows Live family safety is no longer manages the accounts of children using Windows Live ID Windows Live ID on behalf of the child is essentially used for the feature of managing contacts (restrictions on the use of Hotmail and Messenger). Currently, parental control can manage Windows users; However, if you have already configured a Windows Live ID account before the update, it will be always available. You can see the thread below for more information.

  Where is the function of the safety Contact family management?

  If you intend to use Windows Live Family Safety for all users of 500 to restrict the Internet connection, please note that parental control does not restrict the Internet and Web sites. You also have the option in the list of content filtering Web to apply the rules to all users under the Family Safety.

  For more information on how you can install Windows Live Family Safety, please visit the link below.

  Protect your kids with parental controls

  Thank you!

• How can I change the weather in degrees Celsius on the weather app

  How can I change the temperature in degrees Celsius in the weather app?

  Open the weather app and slide down from the top or from the bottom to the top.

  The ability to change the temperature scale is show at the bottom right on the bar that appears.

  Steve

• Are the available PCI drivers if you are using the recovery/Application for an AMD Compaq5610F 64 x 2 driver

  Boots motorcycle only in safe mode without network and new

  printer driver installation fails.  Grand? mark in

  For other devices such as Device Manager:

  Other PCI bridge device

  PCI device

  PCI Simple Communication controller

  SM Bus controller

  Video controller (VGA compatible)

  I'll be able to find and reinstall these

  drivers missing using the Application or driver

  Recovery program?

  If your machine does not start with the hard drive, and I guess no recognition in the BIOS, it's about confirmation that the drive is dead. Not a good way to start the weekend - but for about $60, it can replace the hard drive and order the recovery media to reinstall the OS.

  BTW, have you checked to make sure she didn't burn an OS Recovery DVD set & ranger? She would have gotten a pop-up reminder to do that when the machine was the first installation. Wouldn't be the first time someone put it away and forgot to push.

• Failed to configure the data source for EPMA in 11.1.2.3

  I'm updating 11.1.2.1 to 11.1.2.3 via update on Windows 2008 R2 64 bit
  
  4 .NET installed.
  
  I get the below error.
  
  [2013 05-13 T 17: 21:45.375 - 04:00] [EPMCFG] [ERROR] [EPMCFG-07303] [oracle. EPMCFG] [tid: 20] [ecid: 0000JuVlEW8Fw000jzwkno1H ^ L ^ ^ 000004, 0:138] [SRC_CLASS: com.hyperion.awb.config.AWBDBConfigurator] Oracle Data Provider for .NET entry does not exist in C:\Windows/Microsoft.NET/Framework64/v4.0.30319/CONFIG/machine.config, install it before configuring the repository of EPMA
  [2013 05-13 T 17: 21:45.375 - 04:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle. EPMCFG] [tid: 20] [ecid: 0000JuVlEW8Fw000jzwkno1H ^ L ^ ^ 000004, 0:138] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] error: []
  com.hyperion.cis.config.ProcessingException
  at com.hyperion.awb.config.AWBDBConfigurator.configure(AWBDBConfigurator.java:145)
  at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:650)
  at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:296)
  at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:92)
  at java.lang.Thread.run(Thread.java:662)

  In accordance with the exception.
  *

  Oracle Data Provider for .NET entry doesn't exist 
  

  *

  ODP for .net is required by EPMA dimension server, which you can find here-->

  http://www.Oracle.com/technetwork/database/Windows/downloads/utilsoft-087491.html

  Thank you
  hyperionEPM
  Please check the answers as useful or correct for others to find them easily

  Published by: hyperionEPM on May 14, 2013 20:17

• Configure the HTTP Proxy for ESX4i

  Hey all,.

  I am fairly new to the virtual technology so excuse my ignorance. I just finished the training of PCV and I get some hands on experience using laboratory of my company. The laboratory network restrictions allow only internet access (and any other) my ESX hosts through a proxy server where I have to enter my credentials. (I need internet access for the NTP settings - for now).

  I tried to understand this for about 12 hours and I am very close to madness... I'm either missing something obvious like: 'you can't' or something that is not easy to find for someone like me.

  Thank you, Derek.

  Welcome to the Forums - I don't think it's possible to provide the proxy settings for your ESXi host - the around who is to create a virtual machine where you can configure the proxy settings that need to connect to the NTP source and whether your NTP Server internal -.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• How to configure the virtual machine for the changes to forget

  Hi, I want to ask if it is possible together in the virtual machine for the changes to forget. For example - user run VM... make some changes in the configuration. Then come a new user has it want to have clear (without changes in the configuration) virtual machine. Is possible together closed the machine after changes lost?

  Sorry for my English.

  Thanks for help.

  Hi Polo939

  First, you will need to take a snapshot of the virtual machine.

  • Select your virtual machine

  • Click on "take a snapshot" on the right-hand side of the web interface

  Then you must configure the virtual machine to go back to the snapshot when it is turned off.

  • Click on "configure the VM.

  • Click the "snapshot".

  • Select "back to overview" under when you feed off option

• How to connect several swf in the same application for iOS

  Hello

  I have a problem.

  I have lot of swf files, each of them is related to another: I have a menu with botton page linked to the different games (a swf for the game).

  Now, I need to convert this into an iPad app.

  My question is: which is the best way to create a link between all my swf files?

  I read a lot of things, but I really don't understand how I can move.

  Thx for the help,

  Stefano

  Add them to your files included in the iOS settings panel and use the sdk air 3.6 + and use the current application domain http://blogs.adobe.com/airodynamics/2012/11/09/packaging-and-loading-multiple-swfs-in-air-apps-sur-ios /