How to configure the virtual machine for the changes to forget

Similar Questions

• Non supported configuration of virtual machines for the fault tolerance. The operation is not supported on the object. When activating FT

  Hello

  I try to activate FT on a virtual machine that AFAIK ticked all the boxes for FT but I get this message when activating it. No clue as to what might happen or where to connect for extended information? This error message is too generic...

  Thanks in advance mates.

  Did you follow KB1019165-fault tolerant to fails to 42% with the error: not supported configuration of virtual machines for the fault tolerance

  André

• How to configure the CD driver on the host for a virtual machine?

  After you create a virture machine and put the CD of driver on host, when powered on the vertual machine, may not start the drive form the CD only from NIC.

  How to configure the CD driver on the host for a virtual machine?

  Right-click on the virtual computer and go to edit settings. Click the Options tab and under the tip list, there should be Boot Options. Enter an amount of milliseconds to wait before your boot, so you can activate the CD-ROM. You can also activate the CD even if it boots to the NETWORK card option, and then reset the virtual machine. Get the focus of this virtual machine on the console session, and then press ctrl-alt-insert. Your CD-ROM will stay connected if you do not want to delay the startup process.

• How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

  This is not possible with the way in which we collect information.

• A safety class is not found in this JAVA virtual machine for the following reason: sun.security.x509.CertAndKeyGen

  I'm trying to start OUD 11.1.2.2.0 after a new installation on Windows 2008 Server (oud - setup.bat) and I see the following error. Any ideas?

  [18/Apr / 2014:13:34:04-0600] category = gravity CORE = INFORMATION msgID = 132 msg = The Directory Server starts the configuration of the boot process

  [18/Apr / 2014:13:34:05-0600] category = gravity CORE VIEW msgID = 458886 msg = directory = unified Oracle 11.1.2.2.0 (build 20131115153045Z, R1311150604) commissioning

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381717 msg = installation directory: C:\Oracle\Middleware\Oracle_OUD

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381719 msg = Instance directory: C:\Oracle\Middleware\asinst_1\OUD

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381713 msg = Information FMV: 1.8.0_05 - b13 by Oracle Corporation, architecture 32 bits, the size of the heap 652476416 bytes

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381714 msg = JVM Host: slc00dbh.us.oracle.com, running Windows Server 2008 6.0 x 86, size of 8177541120 bytes of physical memory, the number of available processors 2

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381715 msg = JVM Arguments: ' - Dorg.opends.server.scriptName = start - ds. "

  Exception in thread "main" java.lang.ExceptionInInitializerError: a safety class is not found in this JAVA virtual machine for the following reason: sun.security.x509.CertAndKeyGen

  to org.opends.server.util.Platform$ PlatformIMPL. < clinit > (Platform.java:132)

  to org.opends.server.util.Platform. < clinit > (Platform.java:85)

  at org.opends.server.util.CertificateManager.generateSelfSignedCertificate(CertificateManager.java:283)

  at org.opends.server.admin.AdministrationConnector.createSelfSignedCertifIfNeeded(AdministrationConnector.java:703)

  at org.opends.server.admin.AdministrationConnector.initializeAdministrationConnector(AdministrationConnector.java:182)

  at org.opends.server.core.ConnectionHandlerConfigManager.initializeAdministrationConnectorConfig(ConnectionHandlerConfigManager.java:356)

  at org.opends.server.core.DirectoryServer.initializeAdministrationConnector(DirectoryServer.java:2872)

  at org.opends.server.core.DirectoryServer.startServer(DirectoryServer.java:1539)

  at org.opends.server.core.DirectoryServer.main(DirectoryServer.java:9930)

  C:\Oracle\Middleware\Oracle_OUD > java-version

  Java version "1.8.0_05".

  Java (TM) SE Runtime Environment (build 1.8.0_05 - b13)

  The Client Java VM (build 25, 5 - b02, mixed mode, sharing)

  I used the following jdk based on the matrix and it worked fine:

  C:\Oracle\Middleware\Oracle_OUD>Java-version

  Java version "1.6.0_24".

  Java (TM) SE Runtime Environment (build 1.6.0_24 - b07)

  The Client Java VM (build 19.1 - b02, mixed mode, sharing)

• Newbie question: list the Configuration of virtual machines and data warehouses

  Hello

  I'm new on using powercli how to list all virtual machines in a certain data center, their memory, Procs and what data warehouses they are on.

  I know you can use get - vm | Select-object name, NumCPU MemoryMB but if I add DatastoreIdList as well, it doesn't seem to work.  What Miss me

  Thank you very much

  Laurence

  That's right, you could do

  Get-VM MyVM | Select Name,@{N="DS";E={[string]::join(',',($_.datastoreidlist|%{(Get-View -Id $_).Name}))}},Description |
      Export-Csv "C:\test.csv" -NoTypeInformation -UseCulture
  

  Just look at whether the separator for CSV is be a comma in your culture, you probably need to adjust the separator in the Join method!

• How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  How to move a virtual machine from one virtual switch to the other since the SDK / command line?

  Joshua Smith

  Are you referring to the evolution of the virtual machines network portgroup of one to the other and in your case potentially issue on to another vSwitch? If so, take a look at this script: updateVMPortgroup.pl everything you do really makes a call to ReconfigVM_Task() and passing in a specification change and put to day the network in which you want to change

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• How to configure the router Linksys DD - WRT for WVC54GCA E4200

  I don't know how to configure the router Linksys DD - WRT for WVC54GCA E4200. DD - WRT is very complcated. Help, please! Also, I used the TZO.com to the DDNS. Can I set up the DDNS for DD - WRT router? I used the DDNS to my old model router before. Thank you.

  I followed the TZO supporter last night. I can watch my WVC54GCA outside. All solution links:

  http://tzodns.com/support/tutorials/188

  http://tzodns.com/support/tutorials/190

  Hi Majekho,

  Your domain name has decided to 99.245.xx.x. If you go to www.test.tzo.com from the location of the host, you must see this IP address. If these numbers are the same, then all with TZO works correctly. I guess that it is a simple problem with ports (80, 1024) is not open in the router and forwarded to the right internal IP address of the device (for example. 192.168.1.xxx).

  In addition, if you have a DSL, you will need to call your ISP and ask them to show you how to put your modem in "bridge mode". This will disable the firewall in the modem that blocks incoming connections even if you open ports in your router.
  In addition, during the test, it is best to test on your device remotely, this is due to a common problem called loopback with most routers. For more information about looping, take a look at:

  http://helpdesk.TZO.com/cgi-bin/KB.cgi?view=140

• Migrate the virtual machine for Exchange 2010 from one host to another

  Dear members,

  Please let know us if the migration of a virtual machine for Exchange 2010 is supported to an Esxi host to another, the Esxi version is 5.0.

  There are unique Exchange environment with the role of hub, CAS and mailbox on the same virtual server. We have a maintenance window and we think moving exchange virtual machine from one host to another, but before that I need to be sure if it's supported my MS and do not want to have problems after, because I have also gotten to know here in the forums this snapshot for Exchange 2010 is not supported by Ms.

  Please notify.

  Kind regards

  I'm not aware of any limitations with VMS Exchange migration. Anyway, you can consider running the migration during the low workload.

  André

• How to configure the SMTP server for the osb 10.3.1

  Hi all
  
  Anyone can share information on how to configure the SMTP server for the osb 10.3.1
  and then how to send an email to OSB 10.3.1
  
  Thanks in advance!

  See this url:
  https://blogs.Oracle.com/christomkins/entry/sending_an_email_from_oracle_s

• VShield Configuration Manager 4.1 (and how to protect a virtual machine?)

  I have 2 ESXi hosts currently configured in vCenter 4.1.  Before vShield installation Manager, he had 3 vSwitches present on each server; a regular and two distributed.

  • vSwitch0 - connected to vmnic0 - has management and production of network 1 10.168.90.x

  • VLAN 10.1 - VMFN connected to vmnic1 on each host - connects to the private physical network 10.1.x.x

  • VLAN 10.2 - VMFN connected to vmnic2 on each host - connects to the private physical network 10.2.x.x

  After you install vShield Manager in a new virtual machine and then to deploy vShield Zones to each ESXi host, develops a new vSwitch

  vmservice-vswitch - again group of ports in Virtual Machine vmservice-vshield-pg - not connected to any physical cards

  VMS individual vShield-FW created for each host have connected network cards as below

  • Production network normal 1 - VM Network adapter (attached to vSwitch 0).

  • Production network normal 2 - VM Network adapter (attached to vSwitch 0).

  • Adapter 3 - vmservice-vshield-pg network

  I tried to connect my VMs to the network vmservice-vshield-pg in order

  to protect them and place them behiind the firewall.  However, who has

  seem to work, and my VM has lost network connectivity.

  How to protect a virtual machine that needs to connect to the normal production

  Network (on vSwitch0)?  Is there any configuration steps I'm missing?

  What happens if I want to connect a virtual machine or one of its network cards to one of the 10.1.xx

  or 10.2.x.x networks rather than the normal 10.168.90.x network?  What

  additional steps should I make?  The new 4.1 documentation is not

  helped at all, and it seems that the old vShield Zones 1.0 docs are not

  applies to all.

  There is no need to change the virtual computer is connected to the network.

  Just activate/install vShield zones on your hosts and add rules to the vSwitch or data center.

  The virtual machine will be becomes protected if no error is displayed.

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?

  How to configure the settings of mail on HP Laserjet Enterprise 500 color MFP M575 printer/scanner?  The Office has 5 staff members each with ending with [email protected] for example e-mail addresses.  We have also created an email for option analysis as [email protected] (not sure if creating an e-mail address for the scan option is required).  We are not part of any domain, and there is no server in the office.  When you try to configure the email on the printer/scanner control panel it asks the host name.

  What host name that I can use?

  If you try to configure the browser by using the IP address of the printer, he asks as the SMTP server. The MS Outlook 2010 all our emails use mail.junior - albania.org incoming mail server and outgoing.  Other settings in MS Outlook 2010 are box My outgoing server (SMTP) requires authentication checked and use the same settings as my mail server entering selected.  On the Advanced tab: incoming server (Pop3): 110 (SSL encryption is not checked) and outgoing (SMTP) server: 465 use the type of encrypted connection (SSL) following.

  What server SMTP should I use in this case?

  I would appreciate your help in the configuration of the HP printer/Scanner for scanning and sending by electronic mail to the members of the office staff email addresses.

  Thank you...

  I'll link you to the product page with several documents which I hope will help you to configure your e-mail settings. Please look through them and see which ones fit your needs:

  Scan and send (e-mail, send to folder, digital sending, etc..)

  Here is another site that has some videos that will guide you through the entire upward (here I would try everything first )

  Simulations of MFP - digital send

  If these don't work, please let me know and I will continue to search it for you.

• my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

  I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

  Windows Mail is/was not Outlook.

  Windows XP e-mail program called Outlook Express.

  Outlook is a part of the office.

  Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

  Read this section on how to set up Windows Mail in Vista:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• My IP security camera is different my network ip address, how to configure the camera to match the ip address with the router cable time Wörner

  Please someone help me configure my camera IPsecurity model m12 mobotix ag. It allows to work in the corporate network, but they close down and I didn't bring the camera House but there different IP address of my network and I don't know how to configure the camera to have the same IP address with my home router to TWC, thanks

  Router connections by opening network, in the Panel control, search for the router / properties, enter its configuration

  data in the boxes provided, you will get on the router, a sticker shows data. If lost or deleted, go to its Web

  for the data. Also, perhaps the home page of IP camera offers software/drivers.