Configuring the FTP adapter

Similar Questions

• How to use FTPS using the FTP adapter

  I am trying to create a BPEL process using SOA 11 g 11.1.1.4, that will put the file on the remote site using the ftp adapter. I created JNDI correctly and using portfolio.
  useFtps = True
  walletLocation = correct path of portfolio created in Oracle HTTP Server (OHS)
  walletPassword = walletPassword
  Host = ipaddress
  username = myUsername
  Password = myPassword
  
  For all this, I followed http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10231/adptr_file.htm#BABEBGGD
  
  Now, whenever I try to test this BPEL process it gives me the error:
  
  "Exception occurred during invocation of the JCA binding:" JCA binding run reference operations 'Put' failure due to: error in establishing session SSL. " Error in the SSL session establishment. Impossible to establish the SSL session to the control channel. Response string: 530 please login with USER and pass response Code: 530) Please correct the SSL configuration. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution.
  
  Any suggestion or resolutions are welcome.
  
  Thank you!!
  
  Concerning
  Yogesh

  Hello

  When you configure the connection for the FTP adapter factory in Admin Console, provide the following values for attributes such as the host name, user name, password, port and the path of remote as location when
  you want to save the file to remote server, for example, ftpAbsolutePathBegin. Please fill out this
  attribute with the path like/soa/ftp/file (example path). If you write to a remote FTP server you must create a factory for connections for this as shown above.

  Please try this and let me know...

  Thank you
  N

• Error during the deployment of a process with the FTP adapter

  Hi all
  
  I use JDev 10.1.3.3 and SOA 10.1.3.3
  
  I use the FTP adapter to get a file from a remote site in a vacuum process.
  I checked the option to delete logical files and using directory.
  
  While deployed, I get the error below.
  
  There was a problem connecting to the server "XXXX" using the 'XXXX' port: bpel_APACSHPREQ940PassThroughBPELOB_1.0.jar failed to deploy. Exception message is: ORABPEL-09903
  Could not initialize the agent of activation.
  An error occurred during initialization of a process enabling agent 'APACSHPREQ940PassThroughBPELOB', version "1.0".
  Please ensure that the agents of activation are configured correctly in the bpel (bpel.xml) deployment descriptor.
  oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: java.lang.reflect.InvocationTargetException
  
  
  Please help me...
  
  Concerning
  MORICE

  Hi Pavan,

  Could not initialize activation agent error means that your connection to the FTP server is not valid Please check connection once in addition, if you use SFTP port must be 22 not 21

  Krishna

• Why the file adapter and the FTP adapter are called not transactional

  Hello

  
  

  In the sense Oracle SOA Suite of 'Transactional Services no' are services that does not modify data. That's what I read on the internet, but even that dose not justify as in the Oracle doc it is mentioned that:

  
  

  Suite of adapter are transactional: DB adapter, adapter to JMS, AQ, MQ, Oracle App adapter adapters

  Suite of adapter are Notransactional : file adapter, the FTP adapter.

  
  

  Now, according to the meaning of 'Transactional resource no' must not modify data but I can see operations are the same in the JMS adapter and also file read and write adapter

  In the FTP adapter also I see similar Get and Put operation.

  
  

  Maybe I do not get correct sense of the word nontransactional or maybe I'm wrong understand its meaning.

  Please clarify for me why File adapter and adapter FTP are called from other nontransactional maps

  
  

  
  

  Thank you.

  
  

  Transactional here means the ability to participate in a transaction (global or local) and the ability to restore once the treatment fails down the line in the message stream. File, FTP, and other non-transactional adapters do not have this capacity. Therefore the changes through these adapters are not rolled back if message processing meets as matter later in the stream.

  This could be more useful - http://docs.oracle.com/middleware/1213/adapters/TKADP/life_cycle.htm#CIACFIFB

  HTH,

  Sandeep

• Cannot read the PDF files created by the FTP adapter

  Hello

  I cannot read the pdf files generated by the FTP adapter with its default settings.

  Can someone guide me how to proceed with him. I guess I have to change something in the mechanism of coding in the FTP adapter outbound connection Pool, but do not know what is to be.

  Thank you

  Richa

  Hi all

  I got the solution. I was unable to read .pdf files because the FTP adapter send files just by changing the extension of .xml to .pdf .txt is the reason why it was not readable.

  We had to write a java code to convert the .xml file .pdf and then PAA to the FTP adapter.

  Thank you

• Using the ftp adapter - surveys

  My application... nothing.

  I created a composite simple enough. It has 2 'get' ftp adapters, 2 mediators and an ftp adapter.

  I expected to query the FTP location every 60 seconds, and when he found a file, in order to treat it.

  Strictly, it does nothing.

  Here is my composite:

  <? XML version = "1.0" encoding = "UTF-8"? >

  <!-generated by Oracle SOA Modeler version 11.1.1.7.0 at [09/05/14 12:48]. ->

  < composite name = "caseList.

  Revision = "1.0".

  label = "2014-05-09_12-48-18_247.

  mode = "active".

  State = 'on '.

             xmlns=" http://xmlns.Oracle.com/SCA/1.0 "" "

  " xmlns: XS =" http://www.w3.org/2001/XMLSchema "

  ' xmlns:wsp = ' http://schemas.xmlsoap.org/ws/2004/09/policy "

  ' xmlns:orawsp = ' http://schemas.Oracle.com/WS/2006/01/policy "" "

  ' xmlns:ui = ' http://xmlns.Oracle.com/SOA/designer/ "> "

  " < import namespace = ' http://xmlns.Oracle.com/pcbpel/adapter/FTP/caseList/caseList/storeFilnalFile "" "

  Location = "storeFilnalFile.wsdl" importType = "wsdl" / > "

  " < import namespace = ' http://xmlns.Oracle.com/pcbpel/adapter/FTP/caseList/caseList/readPartial "" "

  Location = "readPartial.wsdl" importType = "wsdl" / > "

  " < import namespace = ' http://xmlns.Oracle.com/pcbpel/adapter/FTP/caseList/caseList/readFull "" "

  Location = "readFull.wsdl" importType = "wsdl" / > "

  < service name = "readPartial" ui:wsdlLocation = "readPartial.wsdl" >

  " < interface.wsdl interface =" http://xmlns.oracle.com/pcbpel/adapter/ftp/caseList/caseList/readPartial#wsdl.interface(Get_ptt) "/ > "

  < binding.jca config = "readPartial_ftp.jca" / >

  < / service >

  < service name = "readFull" ui:wsdlLocation = "readFull.wsdl" >

  " < interface.wsdl interface =" http://xmlns.oracle.com/pcbpel/adapter/ftp/caseList/caseList/readFull#wsdl.interface(Get_ptt) "/ > "

  < binding.jca config = "readFull_ftp.jca" / >

  < / service >

  < property name = "productVersion" type = "xs: String" much = "false" > 11.1.1.7.0 < / property >

  < component name = "processPartialRead" >

  < implementation.mediator src = "processPartialRead.mplan" / >

  < / component >

  < component name = "processFullRead" >

  < implementation.mediator src = "processFullRead.mplan" / >

  < / component >

  < reference name = "storeFilnalFile" ui:wsdlLocation = "storeFilnalFile.wsdl" >

  " < interface.wsdl interface =" http://xmlns.oracle.com/pcbpel/adapter/ftp/caseList/caseList/storeFilnalFile#wsdl.interface(Put_ptt) "/ > "

  < binding.jca config = "storeFilnalFile_ftp.jca" / >

  < / reference >

  <>wire

  readFull < source.uri > < source.uri >

  < target.uri > < target.uri > processFullRead/processFullRead

  < / thread >

  <>wire

  < source.uri > < source.uri > processFullRead/storeFilnalFile

  storeFilnalFile < target.uri > < target.uri >

  < / thread >

  <>wire

  readPartial < source.uri > < source.uri >

  < target.uri > < target.uri > processPartialRead/processPartialRead

  < / thread >

  <>wire

  < source.uri > < source.uri > processPartialRead/storeFilnalFile

  storeFilnalFile < target.uri > < target.uri >

  < / thread >

  < / composite >

  It's one of the adapters 2 ftp "get":

  < name of the adapter-config = adapter "readFull" = "FTP adapter" wsdlLocation = "readFull.wsdl" xmlns =" " http://platform.integration.Oracle/blocks/adapter/FW/metadata ">

  < connection-factory location = ' ist/Ftp/FtpAdapterP011"UIincludeWildcard ="F17QBA-FULL"/ >

  < endpoint-activation portType operation 'Get_ptt' = 'Get' = >

  < className = "oracle.tip.adapter.ftp.inbound.ScalableFTPActivationSpec activation-spec" >

  < property name = "DeleteFile" value = "true" / >

  < property name = "MinimumAge" value = "0" / >

  < property name = "PhysicalDirectory" value = "\" / >

  < property name = "Recursive" value = "true" / >

  < property name = "PollingFrequency" value = "60" / >

  < property name = "File Type" value = "ascii" / >

  < property name = "IncludeFiles' value = 'F17QBA-FULL' / >

  < property name = "UseHeaders" value = "false" / >

  < / activation-spec >

  < / point endpoint-activation >

  < / adapter-config >

  Added parameter:

  The server is a windows machine. Looks like you have to tell him what list command to use.

  Thanks for everyone to research.

• Configure the network adapter speed / bandwidth management

  Hi all

  In VMware ESX 4, it is possible to configure the speed of vmnic with a speed of diferent? I can do 10, 100, 1000 or full / half-duplex (photos attached) but... is possible to configure the speed of 4 MB, 40 MB or something different?

  For bandwidth management, the best solution is the new Cisco device?

  Thank you very much.

  N ° negotiated between the physical NETWORK adapter and the physical switchport speed can be 10/100/1000. Just like in the physical world...

  But you can do some of the traffic shaping based on your configuration... On a vSwitch standard you can control the evacuation traffic. On a distributed vSwitch, you control evacuation AND penetration.

  / Rubeck

• To access the data of a schema using the ftp adapter

  Hi all
  
  Here is an example of the data I receive from my ftp adapter, I read the entire file in my diagram:
  
  < header >
  < batch_filler1 > * LOT < / batch_filler1 >
  < batch_number > 08110 < / batch_number >
  < batch_date > 20090417 < / batch_date >
  < batch_extra > KW1310 < / batch_extra >
  < / header >
  -< detail >
  < cost_centre_comment > 1310 < / cost_centre_comment >
  < cost_centre_code_comment > 01310 < / cost_centre_code_comment >
  < amount > - 3000.00 < / amount >
  < filler1 / >
  < payment_method > T < / payment_method >
  < description > TSHWANE MULTI SKILLS FEATURE ENTREPRENEURS < / description >
  < receipt_number > 338516 < / receipt_number >
  < date_comment > 20090417 < / date_comment >
  < bill_to_cust_id > 11748885 < / bill_to_cust_id >
  < ref_value > 999999 < / ref_value >
  < detail_extra / >
  * < / detail > *.
  -< detail >
  < cost_centre_comment > 1310 < / cost_centre_comment >
  < cost_centre_code_comment > 01310 < / cost_centre_code_comment >
  < amount > - 1870.00 < / amount >
  < filler1 / >
  < payment_method > T < / payment_method >
  < description > UNIVERSITY OF SOUTH UNIVERSITY SOOUTH AF < / description >
  < receipt_number > 338517 < / receipt_number >
  < date_comment > 20090417 < / date_comment >
  < bill_to_cust_id > 10414916 < / bill_to_cust_id >
  < ref_value > 048630 < / ref_value >
  < detail_extra / >
  * < / detail > *.
  -< detail >
  < cost_centre_comment > 1310 < / cost_centre_comment >
  < cost_centre_code_comment > 01310 < / cost_centre_code_comment >
  < amount > - 300.00 < / amount >
  < filler1 / >
  < payment_method > T < / payment_method >
  < description > VET & AGRIC CONSULTA RB JACKSON < / description >
  < receipt_number > 338549 < / receipt_number >
  < date_comment > 20090417 < / date_comment >
  < bill_to_cust_id > 11462639 < / bill_to_cust_id >
  < ref_value > 048893 < / ref_value >
  < detail_extra / >
  * < / detail > *.
  -trailer >
  < cost_centre > W801408014 < / cost_centre >
  < amount > 18467.13 < / amount >
  < trailer_extra > GROOTTOTAAL VIR W8014/8014 OP 20090417 BLONDEL 08110 08110 20090417 < / trailer_extra >
  < / trailer >
  
  As you can see I have several detaildata, I have to loop through my diagram for detail and values and pass it on. How do reference you a particular detail in bpel?
  An example would be if I want the 2nd amount of detail which is - 300.00, I reference him with one [1] as in the tables?
  
  Thank you

  It depends on what you want to do. Usually what people do is the card to a partner link, for example another service. In most situations, the same structure is required for the target.

  The processing activity is the best way to many nodes multi. You must choose it / if the conditions that allow to test conditions, if they match then you execute the plan.

  One thing that draws people out is the use of the for each, if it is not specified that one line is mapped.

  http://download-UK.Oracle.com/docs/CD/B31017_01/integrate.1013/b28987/Phase6.htm#sthref405

  see you soon
  James

• Configure the FTP server using the command line

  After IIS FTP server on Vista (or XP) starts the "default FTP Site" has only "read permissions".
  How can I set the FTP server to the CONTROL LINE HELP, to allow 'write' also.

  I believe that access is denied is possible if,
  the law is already assigned has.)
  you do not have administrator rights (b.)

  Anyway, you can avoid the prompt (Y/N) by the presence of echo on the batch file
  echo y | Cacls filename /g username :permission

  Refer to Microsoft KB on How to Use CACLS.EXE in a Batch File .

  -----------------------------------------------------
  Remember to Vote as helpful for others and accept the the proposed Answer if it is relevant to build KB in this Forum.

• How to configure the network adapter when you run ESXi on VmWare workstation?

  How to configure the network card installing ESXi on VmWare workstation 6.0.0?

  These are the options: I tried bridged, host-only NAP.  None of them works

  

  What Miss me? driver or adapater?

  I'm running on vmware workstation on Windows 7 with Lenovo laptop.

  in the configuration of your virtual machine, the main issue is memory. you gave the 2 GB of RAM, whereas ESXi 6 cannot go forward without minimum 4 GB of RAM.

  If please have 4 GB of RAM and re-run Setup. you will get through.

  message about the network card should also not appear after that. What kind of network you choose depends on your need.

• How to write information to complete file including the names of columns in the ftp adapter using the Ombudsman?

  Hi all

  I have a requirement like the reading of the data from the DB table and put it in a location of ftp server using mediator.also file in the ftp location must be in .csv format.

  I am able to get the data from the file in .csv format.

  But here, my requirement is I want the data from the file with the names of columns (i.e. header information).

  Can someone help me in this problem.

  Thanks in advance,

  Divya.

  Hello

  I am able to get the information to complete file with column names.

  I added a code in the ftpadapter xsd file.

  nxsd:version = "NXSD".

  nxsd:stream = "chars".

  nxsd: encoding = "US-ASCII".

  nxsd:hasHeader = 'true '.

  nxsd:headerLines = "1".

  nxsd:headerLinesTerminatedBy = "${eol}.

  nxsd:outboundHeader = "empno, ename, sal, location, status ${eol} '"

  By adding the code above, I'm able to get the full file header information.

  Thank you

• Configure the FTP in OBIEE offer.

  Hi all
  
  My requirement is to transfer an ibot which was generated in the format PDF from one machine to the other. I know that this can be done by using the settings in the advanced options of delivery as java script.
  
  Can anayone suggest me the settings need to do for the FTP on the machine and java script for this.

  If you use windows, java script works very well.

  In the tab "Advanced" iBot screen, select Actions Add--> custom Script, enable JavaScript.

  In the top text box, specify the name of the Javascript file (ex: Results.js). Select the second radio button under the 'Results' section 'delivery pass the script '.

  Under the 'Other settings' section, specify a file name where you want the results to be captured.

  Create a javascript (Ex; Results.js) and paste the following code. Parameter (1) woukld the file name you specify and Parameter (0) would be the name of the Javascript file.

  This file must be in the following directory %OracleBI%\server\scripts\Common

  var FSO = new ActiveXObject ("Scripting.FileSystemObject");
  var fileName = "F:\\" + Parameter (1);
  var fooFile is FSO. CopyFile (Parameter (0), fileName, true);

  Make changes to the javascript as needed (specifically the folder where you want the file captured.

  -Madan

• can binay file transfer is possible with the FTP adapter.

  Hello
  
  can binay file transfer is possbile by FTP adapter.if yes.then please suggest me how.please let me know

  Hello

  Binary Yes is possible:
  http://download.Oracle.com/docs/CD/B31017_01/integrate.1013/b28994/adptr_file.htm#CACCBECF

  How to:
  read this
  http://download.Oracle.com/docs/CD/B31017_01/integrate.1013/b28994/adptr_file.htm#CACCACGH

• Debugging logs more BEAUTIFUL for the ftp adapter

  Hi all
  How can I turn on debugging more BEAUTIFUL level for ftp in SOA application adapter.
  
  Thank you

  Not sure, you can do this just for the file but

  connect on EM and go to SOA-> soa_infra

  Right-click on soa_infra and select newspapers-> configuration of newspapers

  Expand oracle.soa

  you will see

  Oracle.SOA.adapter

  Assign to this level you want

  see you soon
  James

• The FTP adapter: Missing operation set OSB sbconsole

  Hello

  For the operation of adapter FTP PUT, in the sbconsole of the BSO, I am unable to choose the operation that is absent in a legend of service action. However, it is visible in the action to publish. Can anyone verify if this is a bug?
  

  
  

  Screenshots below for your reference.

  
  

  Publish the Action (operation PUT visible)
  http://S23.postimg.org/bu0mrfn57/publish.jpg

  
  

  Service Action of legend (operation COULD not visible)
  http://S9.postimg.org/qlki10wyn/service_callout.jpg

  
  

  Thank you in advance.
  

  Legend of service can be used ONLY for calling services Proxy/salespeople who are two-way, i.e. who have an answer as well. You cannot use Service legend to call a one-way service (e.g. a business service to post a message in the JMS queue or queue MQ).

  To call these services, you must use the Publish action and use the QoS option as exactly - once during the action to publish If you want to intercept errors to Put / publication.