Conflict setting with BC to edition in the network browser?

Similar Questions

• Link missing in the network browser OR

  I use LabView 2011 with one NOR cRIO.  I used to be able to access the files on the cRIO using network browser OR.  Running the browser would be the cRIO to locate on the network and mark IP address with a hyperlink.  For some reason that the hyperlink is displayed, even if the cRIO is be the browser.  Any suggestions?  Thanx.

  Make sure that the appropriate web services are installed to the target. "" In MAX, go to remote systems' name of your cRIO "software" Add/Remove programs. Select the appropriate version of real-time Module and version of RIO and click Next.

  After this, you should see the configured software add-ons that you can select for installation. Those related to the configuration of the web are in the last section titled 'Web features'. Mainly, you will need the "Network Support Web browser" option (it will automatically select the excess when you select). If they are not installed, select and install them on your target.

  The network browser NOR checks the target for this configuration option and transforms the IP address into a hyperlink if it is available.

  It may be also useful to refresh the network browser OR and give him a moment to check the target.

• problem with opening pdf file of the web browser

  I have Acrobat Pro ver 6 and Adobe Reader 9.1 on a computer.  When my user tries to open a pdf file from the web as it gets the following error message:

  "Adobe Acrobat/Reader that not running to view the PDF files in a WEb browser.  ADBE Acrobat/Reader version 8 or 9 is required.  Quit and try again. »

  What also happens is that Acrobat Pro 6 worm opens and nothing is there.

  I don't know why he received this message from Reader 9.1 is installed.

  One can shed some light on this for me.

  This user must have Acrobat and Reader on its system.  I understand that there are problems with having both.

  It has also set up so that any PDF opens using Reader 9.1.

  Thank you

  Configuration of your PC drive by default for embedded PDFs has become confused, because of multiple solutions of Adobe PDF documents installed on a PC.

  Solution 1:

  Go to start > run

  Type regedit, and then click OK.

  Navigate to the following key: HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe

  Make sure that the correct default data value is set to the path where are installed the Adobe Reader or Acrobat.

  The default installation values are:

  "C:\Program 9.0\Reader\AcroRd32.exe Adobe.

  or

  "C:\Program Files\adobe\acrobat 6.0\acrobat\Acrobat.exe" (not sure of this path.  Make sure that on your PC)

  If Adobe Reader or Adobe Acrobat is installed.

  Solution 2:

  Configure the browser to use Acrobat or Adobe Reader as a helper application.

  If you use Firefox to browse the web, you can change this setting in Firefox by clicking on:

  Tools > Options

  Click on the "Applications" tab

  The first item in the list should be "Adobe Acrobat Document".  In the Action list, click the drop-down arrow and select the application you want to read a PDF file in the web browser.  Click OK and you should be done.

  If you use Internet Explorer to view a PDF file, try the steps below.

  After you configure Acrobat or Adobe Reader as a helper application, the browser starts the helper application in a separate window and displays PDF files within this window. Acrobat and Adobe Reader both include a preference that allows you to specify the Acrobat or Adobe Reader as a helper application.

  To configure Acrobat or Adobe Reader as a helper application:
  Start Acrobat or Adobe Reader.
  Choose Edition > Preferences.
  Select Internet on the left.
  Deselect Display PDF in browser using [Acrobat application], and then click OK.
  Quit Acrobat or Adobe Reader.
  The next time you select a link to a PDF file in the browser, a dialog box asking what you want to do with the file. If you select open, the browser opens the PDF file in Acrobat or Adobe Reader (request for assistance); If you select save it on the disk, the browser saves the PDF file on your hard drive.

• Pro 8000 Wireless with incompatible IP address to the network

  I installed a Pro 8000 A809 wireless printer to my wireless network. It cannot establish a connection with my laptop running Vista wireless. The diagnosis of HP network attributes the cause to different IP addresses on the printer (169.254.29.69) and the Microsoft Vista laptop (192.168.1.xx). A unique SSID is used and there is no local network using the same SSID. The router is a Linksys WRT54G with a range extender WRET54G. The laptop and a wireless printer make contact through the range extender.

  To access the settings of the printer through the IP address of the printer results in Mozilla Firefox and Internet Explorer, a Page load error (can not find the page). I ping the printer successfully using his IP address, so it is really seen by the router... All HP software has been updated. Still no connection.

  Is there another way to change the printer wireless settings? I tried to reinstall the HP software with the same results.

  Kind regards

  Jim...

  Thank you. I had already downloaded the network diagnostic and he pointed out that the printer was not on the same network. I solved the problem by using an ethernet cable between the laptop and the printer. The diagnosis reported then one network address different IP (169.254.223.86) for the installation of the printer. I was able to access this page and set the IP address to the correct network. It works fine now.

  Kind regards

  Jim...

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• RoboHelp 9 edition on the network

  I remember when we were using RoboHelp 5 that we have been cautioned against working on RoboHelp projects onto the network. It is advisable to always copy the folder of the project on your desk.

  We use RoboHelp 9 now, and he asked why we do not work on the network drive. It is always recommended to work on HR projects on the network? I want to evaluate the response before returning a response.

  Kevin

  Hi Kevin

  The same advice applies today. Avoid the network.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

• Sharing collections or sets with clients and synchronization of the difficulty of the PS to PS on my Mac workflow

  Good,

  It is a question of both parties, but because this involves a workflow of the singular, I'm combining them.  The only other issue I've seen related to landmines, has been in 2011, so I hope as the State of LR (laptop or desktop) has improved since then. If not, it's pretty sad... but I digress. Here's the workflow:

  Go and do a shoot, we tell an event in this case. Shoot is done, and I'm on the train or the bus to go home. During my ride home, I already watch over and slaughter photos with LR mobile on my 6 + or iPhone an iPad because my Fuji sent them upon him via wifi. So, I create a collection for the guards, and the first thing I want to do is let the event coordinator will have access to the whole stem, so that I can return my guards with what she likes and confirm all the guards and put them in another collection, probably named something like: 'best choice '. Now that we have access, we can comment, favorite them or give them either colors or stars for editing priority.

  Now say, I am able to do some specific "picks" for the collection of first choice, and I decide to start to do some minor tweaking, such as removal of task/task or cloning in difficulty of Adobe. I wish I could go home, plop in front of my Mac, open PS CC and pick up there where I had left in Adobe difficulty. Is it feasible, or I live in crazy land?

  Finally, I'm done with final touch-ups and I don't want to succumb to the likes of download to Google Drive, Box, box etc... I just want my client to batch download the entire collection in full resolution. Even more crazy, or not crazy?  And if not feasible, it will be in the future, and if not, then why not? Because for all the hassles that cause this kind of thing, I can just as well use Affinity Photo, Capture1 and Google Reader etc... Why should I worry stick with PS 'CC', if the CC part is barely useful in this classic scenario?

  Thank you!

  Doug

  Hello!

  Warner has answered part of the question. What is able to pick up where Fix left, the answer is: definitely! You can send your changes to Fix Photoshop CC by clicking 'send to Photoshop '. However, you will have to "Send to Photoshop" each photo individually. A better way to have a whole lot of changes sync would immediately make the changes through Fix, send them to LR Mobile and have active sync. You will then need to make the rest of the Desktop LR edition or export them in PS CC. It is also important to keep in mind that using portable LR and Fix can resize your images according to their original size.

  It seems that, for now, our applications are completely unable to manage this workflow. Sorry about that!

  Let us know if we can help with anything else.

  See you soon!

  -Kathleen

• With windows media center on the network.

  I have my directv and computers connected to the internet and I try to use windows media center, but it says that it cannot find the tuner when I try to set up the tv. I have a Toshiba A215 with Windows Vista home premium (which apparently has no tuner). I need a tuner since I have everything connected to a network?  My tv wil recognize the computer: I use directv VOD and can get pictures from my computer, but the library does not recognize the tv. I use media center as it seems it would be an easy way to organize media.  I was also wondering if you can use media center or y at - it another way to other internet videos on TV (i.e. youtube...).  I have some suggestions that I'm not a person savy very tech.

  Thanks, BuckyTC

  Hello

  You will need a TV tuner card for watching live TV in Media center. If you already have a TV Tuner card and you get this error, then update
  the drivers for your TV tuner card to solve the problem.

  Click this link for instructions on how to update the drivers for a device:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out these links for help:

  Set up a TV signal in Windows Media Center:
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-TV-signal-in-Windows-Media-Center

  http://Windows.Microsoft.com/en-us/Windows7/TV-on-your-computer-understanding-TV-signals-and-TV-tuners

  Watch TV in Windows Media Center: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions

  Watch Internet TV in Windows Media Center:
  http://Windows.Microsoft.com/en-us/Windows7/watch-Internet-TV-in-Windows-Media-Center

  How do I add or remove games in Windows XP

  |

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Problems with connecting to systems on the network.

  wireless network

  two system connected to ADSL, one with a wi - fi connection and the other with a cable utp, both accessible if they are shredded. Or the two system connected to the local network

  Hello

  (1) do you have made no changes before this problem?

  Follow the steps described in the items listed below and check if the problem still persists.

  Method 1: How to troubleshoot a network home in Windows XP? http://support.Microsoft.com/kb/308007  

  Method 2: How to troubleshoot basic TCP/IP problems

  http://support.Microsoft.com/kb/169790

  Hope this information helps.

• Get the prompt: what program you want to open it with? When to open the web browser

  When I try to open my browser (or any other program), he asks 'what program you want to open with' and gives me a list. What is with that? I have just got rid of "xp security 2012" if it means something... or am I...?

  Hi Leoboutilieri,

  have been closely following this:
  How to get rid of malware?
  Otherwise, carefully follow
  Let me know if it helps
  Elvis

• Installation of VM with VPN client access to the network local provents

  What is the best approach for the connection to the VPN in the following scenario?

  We want to install VM for our projects as VPN client networking (using the cisco vpn client). In many cases the VPN profile that is configured by the client is configured to prevent access to the local network, but rather the tunnels all through the VPN.

  I tried the NAT and Bridged networks and once you connect to the VPN client, the conectitivy of the virtual machine is limited to the VMWare console. SSH and other connections no longer work.

  Thanks for any idea.

  I'd VNC - that's what I use for a VM XP that uses the client VPN SecuRemote CheckPoint blocking the same way (wisely) off incoming traffic when the connection is made to the other end of the VPN.

  Just paste lines similar to the following in your .vmx file when the virtual machine is shut down:

  RemoteDisplay.vnc.enabled = TRUE
  RemoteDisplay.vnc.port = '5910 '.
  RemoteDisplay.vnc.password = 'somepassword '.
  RemoteDisplay.vnc.keymap = 'uk '.

  Note that you point your VNC client software on the IP address (and port of your .vmx file) to your server 2.0, not the virtual machine host. Use a different port for each computer virtual you need simultaneous to access.

• Problem with the PC Backup on the external DRIVE on the network drive home.

  I made backups of my laptop wirelessly through my router to my connecting external hard drive attached to my desktop, when I used Microsoft OneCare. Since then, OneCare is being abandoned, I decided to go to the basics of Microsoft (MS). Unfortunately, Ms Essentials doesn't have the features of OneCare. I try to perform a backup using the backup and Restore Center, however, I get an error message when I put backup settings to location network - error code: 0 x 80070534, no mapping between account names and security IDS was done... the results. Is there a KB or a fix for this problem? I've looked everywhere for answers and keep looking, however, I have found no solid solution (especially scams, i.e. pc scanners and fixers of registry error). How is it that I could make a backup without problem with OneCare (that I have no more:{{class=fontblue}} {.}) Now I try to do through the Center backup and restore, the backup does not work! It makes no sense at all!  I have Windows OS: Vista Home Premium 32-bit 2 Gb RAM SP2; HARD drive external: Maxtor 3200 (320Gb) hdd personal

  Thanks, I found the problem. I had to uncheck the ReadOnly property on the folder that I traced to use for my backup location on my HARD drive. In truth, the property read-only (checkbox) is not checked, it is filled (designates the system setting) with a green square in the box (on my Windows XP desktop). I'm sure that others have missed this little nuisance. It's cheating. I don't know how many times I looked at the folder that I use for my backups, forget to realize that the ReadOnly is the default setting for the file. I no longer get the error message: 0 x 80070534, no mapping between account names and security IDS was done. I can't believe it's just as simple as that! My backups work fine.

  Karena, R, thank you for your time and help in any way.

• Set-vipermission to groups at the level of the network in vCenter?

  I tried to assign permissions to objects in network with Powercli.  Based on this link http://communities.vmware.com/message/1563864 Set-VIPermission does not work on the network of the objects and provide a workaround to assign permissions.  This works very well when you are trying to assign users but throws the following error when you set the security to a group entity (IE, domain\group)

  
  

  $SpecPG = get-view ViewType - network | where {$_.name - eq "Network"}

  
  $role = $authMgr.RoleList | where {$_.} Name - eq $role}

  $authMgr = get-View Manager
  $perm = new-Object VMware.Vim.Permission
  $perm.principal = "Domain\vSphere_Users".
  $perm.propagate = $true
  $perm.roleid = $role.roleid
  $authMgr.SetEntityPermissions ($SpecPG.MoRef, $perm)

  
  

  Exception by calling 'SetEntityPermissions' with '2' or the arguments: "the user or the group named 'Domain.Local\vSphere_Users' does not exist."
  Online: 39 tank: 30
  + $authMgr.SetEntityPermissions < < < < ($SpecPG.MoRef, $perm)
  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
  + FullyQualifiedErrorId: DotNetMethodException

  
  

  It seems that when you try to set permissions for, it adds the name of domain (in this case Domain.Local) FULL instead of just the domain name.

  
  

  Is there a way to remove the COMPLETE domain name in the main name?
  

  
  

  I use VMware vSphere PowerCLI 5.1 Release 2 build 1012425.

  
  

  Thank you

  
  

  John
  

  It seems that if you forgot the Group property

  $SpecPG = Get-View -ViewType Network | where {$_.name -eq "Network"}
  
  $authMgr = Get-View AuthorizationManager $roleName = "Admin" $role = $authMgr.RoleList | where{$_.Name -eq $roleName}
  
  $perm = New-Object VMware.Vim.Permission$perm.principal = "Domain\Groupname"$perm.propagate = $true$perm.Group = $true$perm.roleid = $role.RoleId
  $authMgr.SetEntityPermissions($SpecPG.MoRef, @($perm))
  

• How can I remove an additional editable in the head of a specific page?

  I have a single model site.  My model is the standard two regions editable in the head ('title', 'head').  Somehow, one of my pages ended up with three regions editable in the head - two named 'head' as well as the title.  My model refresh this page because editable regions do not match.  How can I remove this extra editable area of the top of the page?  I can't change it on the page itself, of course, and I can't remove it by changing the template because it is not part of the model.

  Thanks in advance!

  Your child page does not contain editable regions, if it was not attached to a model.  Maybe you nest templates which is the wrong thing to do.

  Go in modify > templates > detach model.

  Nancy O.