Confused after backup image

Similar Questions

• Caching SSDS on Inspiron One 2330 turn on/off before/after backup Image C:

  My new Inspiron one 2330 works under 64-bit Windows 8 and SSD Caching-as put in place by DELL

  Before I run Acronis True Image 2013 to generate a backup Image of your hard drive, I need to disable the SSD Cache.
  Otherwise the restored Image cannot start successfully - because the content of the HARD drive would be incorrect.
  After the backup is completed and verified, I need to turn on SSD Caching.
  To do this, I want to insert a command-line command before / after the backup operation in the Acronis program options.

  So my Question is actually:
  What command line command (C: /...) can I use to make the switch or disable the Cache of 8 SSD 64-bit WIndows?

  Thank you!

  Hello Reinhard Klein,

  You can follow the steps below in order to dissociate the SSD cache:

  

  

  You can create an image with Acronis and then follow the steps below to reassociate SSD cache:

  

  Note: Dell has not tested or approve the use of Acronis True Image to create a backup of the image.

  I hope this helps.

• Windows complete PC Backup Image - impossible to restore the backup on my laptop after the restoration of the C drive.

  My user profile is not loaded correctly, and so Sony told me to do a restore of the C drive which took my drive C back to factory settings and lost all my programs and files.  I tried since then to restore the Windows Image backup I did on my external hard drive.

  I open backup and Restore Center, click Advanced Restore, click Advanced Restore again.  The box application to what you want to restore?  The only option is to files from a backup made on a different computer.  I click Next, and he said: select the location of the backup to restore.  Hard drive, cd or dvd option has already found new Volume (e), which is my external hard drive.

  I click Next again, and he says, select dates to restore from.  The only option in the box is dated 2008-01-12 14:14:34 backup location is not available.  My external hard drive has multiple backups on it, including the Windows Backup Image (which was the first backup, I did and it contains 152 GB), and so I do not understand this.

  I continue, and then click Next.  It now says select files and folders to be restored, but there is nothing in the box.  I have check the restore everything in this backup box and click Next.  I save the files restored to the following location - check and navigate to the C drive.  I also check both boxes: restore files to their original subfolders and create a subfolder for the drive letter.  I click on begin to restore, and then he said:

  Restoration was unsuccessful.  Error: the parameter is incorrect. (0 x 80070057)

  I'm desperate to be able to get my programs and files back on my laptop.  I don't understand why the restore function can not see my Windows Backup Image, and why this is so difficult.  I've read other complaints by users about this, but cannot find a solution.

  I look forward to hear from you.

  Thank you.

  Hi HGHFaith,

  I suggest you try the following steps:

  Step 1 : Clean boot the computer and then try to restore

   

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists,

  Step 2: Run Check disk to repair bad sectors on the hard drive.

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. type E: (external drive) and press enter

  c. at the command prompt, type chkdsk /f and then press ENTER.

  Now, type chkdsk/r

   Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Check whether the problem is resolved

  For more information, see the link below

  Restore your computer from a system image backup

  HTT://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Accessibility of the previous backup Image of RMAN copy after roll forward with the additional days

  Hi all

  I have these 2 questions related to RMAN Image backups. Please suggest the best approaches...

  We are in publishing Standard of Oracle 11.2.0.3 database on instances of RAC ASM on Windows 2008 and want to see the feasibility of using Copies of RMAN images for our databases.

  Have a question about the availability of backups for restoration in a scenario explained below:

  1ST QUARTER)

  To get copies of the Image which are rolled to the next incremental backup. Can we still restore/recovery to earlier date than the Image backup before rolls? If not, please suggest

  What is the best way to accomplish this task if we choose RMAN COPY of IMAGE as our backup strategy.

  Example:

  Log archiving is enabled.

  Sunday evening: full level 0 backup copy Image

  Monday night: 1) level 1 incremental Image copy backup and Roll-forward/apply the incremental backup for the full backup from Sunday

  (2) backup of files to archive log after the full backup from Sunday.

  Tuesday evening: 1) level 1 incremental Image copy backup and Roll-forward/apply the incremental backup for roll Monday transferred (full) backup.

  (2) backup of files to archive log after incremental backup from Monday.

  Wednesday evening: 1) level 1 incremental Image copy backup and Roll-forward/apply the incremental backup to roll Tuesday transferred (full) backup.

  (2) backup of files to archive log after incremental backup on Tuesday.

  Can we restore and recover the data until Tuesday morning 11:00 even if our full backups are rolled transferred by the application of incremental backups. Please suggest

  What is the best way to accomplish this task if we choose RMAN COPY of IMAGE as our backup strategy.

  Q2)

  Q2.a) Scenario 2: with above politics of backup in the 1st quarter.

  If I intend to use the copy of current Image backup on WEDNESDAY NIGHT for the recovery and restoration on-site. understand that

  We're losing backup of forwded for the roll of Wednesday night. Is it possible to take a backup/backup copy of this Wednesday night before being used for on-site recovery, so that we can use it

  for all future restorations.

  Q2.b)

  If we are unable to take backup of the night't Wednesday backup before being used for the recovery on the spot. We can always access backup Image roll passed Tuesday night? If so, can

  I take a new incremental Image copy backup Thursday night and roll forward/apply to copy backup Image Tuesday night. Please suggest the best approach to have accessible backups for each night?

  Thank you

  Hello

  I suggest that postpone differentials apply for a week as says Hemant.

  for example:

  grab the copy of database with tag = "incremental_update" until ' SYSDATE-7 "; ". "

  1 extra strength to recover from backup with tag = "incremental_update" database;

  Talip Hakan Öztürk

• Create the backup image to my laptop M40-114

  After that I installed my laptop I want to make a backup image to update my drive. I use True Image to my desktop, but when I use this for my laptop, it won't boot from the recovery cd, i.e. at the start of my cd it shows loading Acronis and rest in this screen forever.

  Does anyone know a good way/program to create an image on my laptop?

  Thank you!

  Post edited by: Micromouse

  Hello

  I use Norton Ghost 2003 to create the backup image file. The application is simple to use and I saved the picture on my second partition. If something goes wrong, I can restore the unity of the image any time.

  Good bye

• How to open .wim file after backup in Windows 8?

  How to open .wim file after backup in Windows 8?   The files were backed up on an external hard drive in the form of .wim files before the 'crash' and 8 re-installed windows.   Now, I can not restore files.   The computer does not recognize the external hard drive when I try to restore through troubleshooting > adv options > System Image recovery.

  Hello

  Same as Windows 7:

  http://support.HP.com/us-en/document/c03056985

  Kind regards.

• I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?

  I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."

  Please advise! Thank you! Sincerely, s

  If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.

• Creating a backup image of the disk HARD Portege M400

  I tried to create a backup image of my HD but can not find software that is compatible with the M400 which will generate the image on a separate USB drive.

  Does not see the local disk but can see USB drive - that someone has managed to generate a backup HD picture?

  Thank you

  Hello

  What application are you using to create the image?
  I use Symantec ghost and I m very happy. I created an image file that has been placed to the second request, and if something goes wrong, I m able to install the OS from the image file.

  In addition, this unit supported RAID and the RAID driver must be installed in order to recognize the HARD drive.

• System backup Image against the system recovery disks

  Hello

  I'm new to the system recovery things and I have a question...

  I just bought a new computer laptop m7-1015dx of Pavilion and need to do system recovery discs... (which I realize restore laptop to factory default)... BTW, I have already created the system repair disc.

  However, I read an article on creating a system backup Image allowing you to recovery if lost EVERYTHING, all your installed programs, etc.

  First Question:

  Can someone tell me if I do the backup IMAGE of the system...

  Do I still need to create recovery disk (mfg default) system also?

  The second Question:

  If I create system recovery disks can I still this Recovery Partition?

  I am really really wanting to partition my C:\ drive... it is huge

  In addition, I hate to see storage folders involved in system folders...

  Currently using a symbol/character to separate them.

  From now on, I can't partition the C:\drive all partitions are used as... Max is 4

  and I have 4... C:\drive, System Partition, Partition HPTools and recovery Partition.

  Any help or assistance would be appreciated.

  Thanks for the research.

  Best regards, Jenn

  Hi, Jenn:

  I'd certainly recovery disks because in the case of a hard drive failure, a recovery partition is unnecessary because it would be on the failed drive.

  Recovery disks will do the same as a recovery partition. Reinstall the operating system and programs supplied with your laptop.

  I have also copy off the coast of the C:\drive SWSetup folder and store it on a portable hard drive that contains all files Installer provided with your PC (except MS Office 2010 Starter).

  You can also make your own Windows 7 installation disc and have a nice bloatware without installing windows, and then install only the programs you want from the SWSetup folder.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You can get rid of all the partitions you want to if you plan to use recovery or disc of Windows 7 installation method that I posted above.

  I write my product key and store them somewhere for more security that many people report that it fades if you keep the laptop on your lap a lot, and then you wouldn't be able to use the alternative method to install W7.

  Paul

• WS 2012 and NAS backup failed to prepare the backup image

  Hello

  I'm trying to back up some of my data to Windows server 2012. I am using LG - 250GL Buffalo NAS.

  I use the scheduled backup option, but it is unable to prepare the backup image, error code is "0x807800C5", event id 517."

  However, if I rename my folder name, and then it creates the folder and with successful backup my data, only problem is that it is said version is not compatible. Once again, if I change the name of the folder, it's OK, but I can't do that everyday manually, everything save automatically at certain time.

  I tried to find a solution, but nothing works.

  Maybe my NAS is a bit too old and is not compatible with the version of 2012.

  What are my options? Should I buy new SIN or is it fixable somehow?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.

• restore from backup image

  I have an Acer Aspire E1-571-6856, Windows 7 64 - bit, 4 GB RAM, 2.6 ghz core i5, 4000 hd graphics card

  I have created a backup of the image using Acer Backup Manager.

  There is no option to restore from Acer although backup recovery image.

  How can I restore backup images?

  I don't think that you can load your restore with Acer erecovery media point, since normally is used to re - install from scratch the BONE.

  You must create your own media recovery with the same software that you created in the backup image, which will no doubt help to load the backup image.

• usually open after backup, Windows registry can not be upgraded to int ex 8. need to know how to go in safe mode, remove int ex 8 and redownload, perhaps?

  used Windows open, after backup to a date earlier, says registry cannot upgrade to int ex 8, need to know how to go in safe mode and try redownloading my java script and maybe uninstall redownload and int ex.8, I have windows xp professional sp 3

  used Windows open, after backup to a date earlier, says registry cannot upgrade to int ex 8, need to know how to go in safe mode and try redownloading my java script and maybe uninstall redownload and int ex.8, I have windows xp professional sp 3

  Hey mary, mary

  Here is the vista forums

  Choose Safe mode with network to use in the menu you will have your internet connection to use for download unless you connect through wireless

  Using the F8 method:

  1. Restart your computer.
  2. When the machine starts first, yet once it will list usually some equipment that is installed on your machine, amount of memory, hard drives installed etc. At this point you should tap theF8 key repeatedly until you are presented with a menu of Advanced Options in Windows XP .
  3. Select the Mode safe mode with the arrow keys.
  4. Then press enter on your keyboard to start safe mode.
  5. Make all the necessary tasks and when finished restart to start in normal mode.

  and here is a link to the xp repair forum

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads?filter=AllTypes

  Walter, the time zone traveller

• Hard disk backup/Image program

  Hello:

  Here... I mean "Backup" to be * just * a backup of files & folders.

  Backup, a full backup of the (gradually) of the any of your laptop

  Internal HD, external hard drive, disk,... to another internal HD, flash memory

  external hard drive, FlashDrive... etc.  In short, an 'image' of this player.

  I'm running 32-bit of Windows Vista Home Premium on an HP Pavilion laptop.

  Do you know a "backup" program that is very easy to use, where you can essentially

  "Click & Drag" your hard drive icon (or one of the 'readers listed above)

  make a complete (or partial) backup (image) of this drive?

  I would like that the file 'backup', designed to be easy to read and use: not something that

  is an encryptyed or a filetype Tablet (e.g. .tib), other than possibly .zip.

  The key point here is 'easy to understand', 'easy to install' and 'easy to use '.

  Thank you

  DaleB

  Hello

  Vista Home Premium only makes the backup of files, not 'do Backup. "

  There are a number of 3rd party programs available for a full backup of the computer; others, you must pay for, some are free.

  This program must be purchased:

  "Acronis True Image".

  http://www.Acronis.com/homecomputing/products/TrueImage/index_gwo.html?utm_expid=4274314-6

  These are free programs for the protection of the computer:

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  Read about them or try them and decide which you prefer to use.

  See you soon.

• How to compress files after backup is finished in batch script

  Original title: files compressed
  How to compress files after backup is finished in batch script

  Hello

  Thank you for visiting the Microsoft answers community site. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows 7 Scripting forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

  I hope this helps.