WS 2012 and NAS backup failed to prepare the backup image
Hello
I'm trying to back up some of my data to Windows server 2012. I am using LG - 250GL Buffalo NAS.
I use the scheduled backup option, but it is unable to prepare the backup image, error code is "0x807800C5", event id 517."
However, if I rename my folder name, and then it creates the folder and with successful backup my data, only problem is that it is said version is not compatible. Once again, if I change the name of the folder, it's OK, but I can't do that everyday manually, everything save automatically at certain time.
I tried to find a solution, but nothing works.
Maybe my NAS is a bit too old and is not compatible with the version of 2012.
What are my options? Should I buy new SIN or is it fixable somehow?
Tags: Windows
Similar Questions
-
I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.
Original title: Chameleon engine
I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!
-
Hello
I have a cisco aironet 1100 Series wireless access point.
by mistake I delete the IOS of the router and now I need to copy the IOS image again on it.
I need your help please.
For now, he has the Ethernet led RED, Green State, Rdio RED. T no Cisco IOS image file the spirits).
I downloaded the file c100-k9w7 - mx.123 - 8.jed
and I download the tftp (tftpd32) servers
I have the router connected directly to a pc with the static ip address of 10.0.0.2
but the problem is actually that I don't need the 1100 router ip address right now, I can't access it through a web browser.
and by a tftpd32 I try but no function.
I don't know what I'm doing wrong.
other things, it's that I did not find a clear manual on how to use a tftpd32 to transfer the file to the cisco router 1100 series.
Thank you.
I'll wait your hepls.
Convert a standalone Lightweight Access Point
http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272 -
I am to evaluate Symantec Backup Exec 2012. The software can create a virtual machine of any system. What I need is a copy of the ISO image of the Vmware tools for windows. Where can I find this download? I did a search with nothing. I'm not in data warehouses. I use Vsphere 4.1.
Thank you.
Bill
Hello
When you right-click on a virtual machine and go ' install/upgrade tools', she mounts this ISO in virtual CD player of this VM.
-
WS-Security and proxy service: failed to add the identity security token
What the reason of 'Unable to add the identity security token' fault in this situation (10.3.1):
I did a simple proxy service "hello word" and tried to link custom policy.
WS-Policy is planned:
< wsp WSU: ID = "WS-Policy-Siebel.
xmlns:SP = "http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702".
xmlns:WSP = "http://schemas.xmlsoap.org/ws/2004/09/policy".
xmlns:WSU = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
< wssp:Identity
xmlns:WSSP = "http://www.bea.com/wls90/security/policy" >
< wssp:SupportedTokens >
< wssp:SecurityToken
TokenType = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken" >
< wssp:UsePassword
Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" / >
< / wssp:SecurityToken >
< / wssp:SupportedTokens >
< / wssp:Identity >
< / wsp >
Process of WS-Security is set to "yes".
During debugging, I see that all works fine - I can authenticate with the defined credentials and breakpoints in the proxy stream service works very well.
But in the end, I get the error:
SOAP fault:
< env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env >
< env:Header / >
< env:Body >
< env:Fault >
env:Server < faultcode > < / faultcode >
< faultstring > cannot add the identity security token < / faultstring >
< / env:Fault >
< / env:Body >
< / env:Envelope >
In the console:
< 09.06.2010 17:39:18 MSD > < error > < OSB security > < BEA-387023 > < an error occurred during the processing of incoming web service security response [error code: F]
[Ault, message-id: 1721282272521583996 - 57dc4ccc.1291cc2282d.-7fab, proxy: OSB project WS-Security/WSSecurityService, operation: NewOperation]
-Error message:
< env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env > < env:Header / > < env:Server env:Body > < env:Fault > < faultcode > < / faultcode > < faultstring > United Nations
able to add the identity security token < / faultstring > < / env:Fault > < / env:Body > < / env:Envelope >
weblogic.xml.crypto.wss.WSSecurityException: failed to add the identity security token
at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(SecurityPolicyDriver.java:175)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:73)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:88)
at weblogic.wsee.security.WssServerHandler.processResponse(WssServerHandler.java:70)
Truncated. check the log file full stacktrace
Incoming soap message is:
< soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
< xmlns:soap soap: Header = "http://schemas.xmlsoap.org/soap/envelope/" >
< wsse: Security SOAP: mustUnderstand = "1" xmlns:wsse = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" >
< wsse: UsernameToken WSU: ID = "unt_TNNp0cBwU7HyPKoq" xmlns:wsu = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
< wsse:Username > testuser < / wsse:Username >
< wsse:Password Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" > testuser < / wsse:Password >
< / wsse: UsernameToken >
< / wsse: Security >
< / soap: Header >
< soapenv:Body >
< wss:NewOperation xmlns:wss = "http://www.troika.ru/Enterprise/WSSecurityService/" >
< in > chain < /in >
< / wss:NewOperation >
< / soapenv:Body >
< / soapenv:Envelope >
Edited by: L. Andrey on June 9, 2010 17:55You are the WS-Policy liaison to the entire operation or only for the query part of the operation. If you link the WS-Policy for the operation, the policy applies as well to the request and response. If the response message also contains the WSSE headers with a name of user and password invalid. You can check this?
-
I disabled the magnifying glass, and I still don't see the entire image or a page on the site
I turned off the magnifying glass, and again, I don't see any page or photo that I need to see. Example;... I play Farmville on Facebook and I see all the options or boxes, on the page of game.
I turned off the magnifying glass, and again, I don't see any page or photo that I need to see. Example;... I play Farmville on Facebook and I see all the options or boxes, on the page of game.
http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution
Change the screen resolution
Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.
For example, 640 × 480 is a lower screen resolution, and 1600 × 1200 is higher. CRT monitors generally display a resolution of 800 × 600 or 1024 × 768. LCD monitors can better support the higher resolutions. If you can increase your screen resolution depends on the size and capability of your monitor and the type of video card you have.
Text and images are sharper and smaller at high screen resolutionsText is larger and easier to read at low screen resolutions, but images are rasterized and number of items adapted to the screenOpen display settings by clicking on the button start , by clicking on Control Panel, appearance and personalization, clickingPersonalization and then clicking display settings.
Under resolution, move the slider to the desired resolution, then clickApply.
NotesWhen you change the screen resolution, it affects all users who log on the computer.
When you set your monitor to a screen resolution that it will not support, the screen will go black for a few seconds while the monitor returns to the original resolution
See you soon.
Mick Murphy - Microsoft partner
-
How to install windows server 2012 and windows 7 or 8 on the same computer
Hi, I want to install windows 7 or 8 and on the same computer that I want to install windows server 2012 or 2008 I have not decide which one to buy again, and my question is, at the time where there was windows xp and windows me (x 9) for example, you must install first as millennial basic then install xp on another partition in my case I want to know is - it possible to do it without the virtual machine, and if this is the case, which windows must be installed first as the basis...
Thanks a lot for taking time reading this, looking forward to your reply...
You will need to ensure that the old version of Windows is installed first of all, in this case (Windows 7), then you can install Windows 8 or Windows Server 2012 after on logical partitions. Please see the following:
See the following for how to dual boot Windows 7 and Windows 8 (the same principles can also apply to Windows 7 and Windows Server 2012)
How dual boot Windows Vista/7 and Windows 8
If you plan to have all three installed, make sure that configure you partitions in advance with ample space for all three.
See:
http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/
-
Hello
I am running RH (installed in Program Files x 86) 11 on a Win 7 (64-bit) machine. I just created a new project with a lot of folders/subfolders and a single topic welcome. This project compiles fine using the RoboHelp interface. However, when I run RHCL from the command prompt, it refuses to start.
Here are the details of the order and the results:
from c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML
c:\Program Files (x 86) \Adobe\Adobe RoboHelp 11\RoboHTML > rhcl 'c:\knowledgecenter\knowledgecenter.xpj'-l 'WebHelp '.
Adobe (R) RoboHelp version 11.0.4.291 Project command line compiler
Copyright (C) 2006-2007 Adobe Systems Incorporated and its licensors. All rights reserved.
Project: c:\knowledgecenter\knowledgecenter.xpj
Layout: WebHelp.
Output:! SSL!\WebHelp\Index.htm
Scanning for the compilation project...
Error: Impossible to analyze all project files. Please use RoboHelp to recover the project.
Unexpected error: failed to prepare the data of the single source for RHCL. Please try to compile in RoboHtml.
I tried deleting the cpd and the project from the hhp file - has not made a difference.
Help!
Thanks in advance,
Claudia
Thank you. What I discovered yesterday, it was that after the project SVN on my local machine to test the command line build process, somehow some of the FPJs was missing! Because the folders containing the missing FPJs were empty, I guess GUI HR could ignore and compile correctly. It turns out that I have somehow missed tried all FPJs in source control. Once I got all the archived FPJs, when I refresh svn at the local level, the construction of the command line worked well.
Kind regards
Claudia
-
I took the opportunity to update firefox last week (June 9, 2012) and now I can't play the video, I subscribe to a site of learning music and he asked to upgrade me to the latest version of Flash, now I did and my videos still won't play If I use Chrome, I have no problem, Firefox has ruined my system HELP.
Confirm the Adobe test page that Flash is installed?
Update the Flash plugin to the latest version.You can find the latest version of the Flash player for Firefox on this page.
-
Using Win7 Home edition.
When I did the first backup of a USB attached hard drive, I got what I expected: the two backup files AND a backup image.
When backup running under Win7 backup schedule, I had ONLY the backup files not image that I expected.I want BOTH each time when backups are performed.
What I am doing wrong?
TIA for any assistance.
Windows backup creates a backup of the selected type, IE an image backup or a backup set, not both, the complete image data would also include the data (on the same partition)
-
No audio and error bad Sfc.exe after the recent update of Windows
Original title: error sfc.exe bad image
Less than 2 hours ago, an automatic update of Microsoft Windows has been installed. Now I have no sound. I get a message in mmc.exe bad image. I tried sfc/scannow and had an error of sfc.exe bad image. I searched the community and found no other question about the bad image sfc.exe, so I do not know where to go from here. Any ideas?
Hello Ubgrad,
Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.
Try the rest of the two following methods according to your convenience and check again running Scan SFC.
On addition to that, you can also run Windows built-in audio store. See the article below to run the audio troubleshooter.
Open the audio playback troubleshooting utility
http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter
I hope this helps. Just reply with the results.
-
me and my friend has created a Web site, him with the help of adobe photoshop with a .psd file, then he has compiled all that and sent me to do in dreamweaver.
the problem is that I can't put any text on it, because the images of ruin.
I'm not very good in dreamweaver. I tried to put a top coat and seems to work, but when I look in firefox all the text is on the left, I tried to line up, but is still not where I want to.
is there anyway that I can put the text on the images wherever I want without ruining the design?
images are placed using a table simple code
www.3X.tehcheese.com/test is the documentHello
I did some work for you. On the page. Please follow the link
http://www.Digimax.org/test/3xtreme.htmlThat's what I did. Used your webpage, saved as a pdf file, saved the pdf file in png format and cropped it, which serves as the background image.
Sliced your links - home... About us and so on... and in sub format of graphic links in a. Graphic links are in png format. Ideally, they should be gif or jpeg format.
Put in a text of demonstration. It is not formatted and has no style with it. Just to show that the text can be set.
In the anyTags that you can put in the items table, and that should work for you.Please save the webpage http://www.digimax.org/test/3xtreme.html
and all the files, including background, slices etc will be saved as well. Look at the code and it will start how to navigate.
I hope this helps. -
Hello. I recently acquired a new computer with Windows 7 Home Premium x 64. At first startup, I ran Windows update. As usual, a large number of updates have been downloaded and installed. Reboot, Windows update run and failed with the failure of the code 800b0100 and 8007065E. By clicking on the error codes led to a suggestion that 800b0100 could be solved by downloading and running the "System Update Readiness Tool" (KB947821). The help text for 8007065E says nothing useful.
I have downloaded and run the tool preparation system update, but after that Windows Update has failed once again.
Deselecting all individual updates but I finally managed to get everything except three to install. The other three are KB2442962, KB982214 and KB2345886.
I ran the system update tool several times.
I ran the "Windows Update Troubleshooter". He noted that he has made no changes to the system.
I downloaded the updates individually and run them manually.
They do not always succeed.
Grateful for any suggestion.
Hey, Marc P
Thanks a lot for your offer to help. If I had checked this thread earlier I would have taken you to this topic.
However after trying various other ineffective solutions proposed by MS supports (such as installation of downloads in 'safe mode', which produces the error message "this service cannot be started in safe mode") I ended up doing a reinstall instead of the BONE. That fixed it.
Thanks for all your attempts to help.
-
Several VSS writers fail and my backups are failling too. Need help!
Several VSS writers fail and my backups are failling too. Need help:
I have a desltop installed SP3 x 64 XP and a laptop with seven x 64 SP1. In both the machine that my backups fail. I'm trying to back up data by using boats to storage, backup Windows also is failling. I'm taking a full backup on a USB external drive (2 TB).
I did "vssadmin list writers" and showing several writers are in the failed State.
I've done SFC/scannow, it did not help. There is no error in the disk and Chkdsk.
I don't know how VSS works and how to solve the problem. Help, please!
A lot of people told me they found this informative article. That's why I upgraded that and display back again.
-------------------------------------------------------
Before you stat is working on this issue make sure that the volumes have no system disk/file error. Run Chkdsk and ensure.
(1) in the case of a failure of backup/writer, we first check the drivers associated with the VSS backup.
These drivers are:
VOLSNAP. SYS
NTFS. SYS
SWPRV. DLL
-Check the version of above mentioned MS 3 files and update using MS Hotfix.
If we have installed other suppliers, who might be the supplier of StorageCraft, Symantec suppliers and suppliers of Acronis, he must ensure that their files are also updated.
Note: You can see the list of suppliers using this command: VSSADMIN LIST PROVIDERS
Some of the DRIVERS PROVIDER commonly find are:
stcvsm.sys
symsnap.sys
snapman.sys
(2) this step is performed only when we find him
VSS writers in a failed State. If we find the stable writers and backups still fail, or we get errors, do not perform this step if you please.
In this case, the VSS writers fail, we can delete the following registry key, after of course saving and restart the server.
HKLM/Software/Microsoft/EventSystem/{26c.../Subscriptions.
This key will be automatically recreated when you restart and writers should return to the stable state.
The writers pending the completion status is not a problem. It's also good that Stable.
We can do on the Server 2003, 2008 and 2008 R2 OS as well.
However, in Windows Server 2003, after you delete and restart the "vssadmin list writers" server cannot display all the writers, in this case must register the dll:
For a list of the dll files to register, please check KB: http://support.microsoft.com/kb/940184
Note: The reinstatement of dll in Windows Vista/2008 and especially is NOT recommended.
(3) if we have only one / specificwriter (s) in a State of failure, which would always be SQL, EXchange, IIS or NTDS, then we have need to revive their respective service Console of service.
If they fail repeatedly, then make sure that the application and its components are updated. See their respective engineers immediately. Make sure that the latest service packs and patches are installed.
(4) make the foregoing, resolves generally 80 to 90% of the questions. If we believe that the issue is occurring, or we have VSS event errors, it may be the providers, the origin of the problem. If the creation of the snapshot does not properly, it can affect writers and other components involved.
Please check providers using "vssadmin list providers. If we find any other provider, other than the Microsoft software shadow copy provider, we have to remove from the list.
To do this: start the registry editor.
HKLM/System/CurrentControlSet/Services/VSS/suppliers/GUID.
One GUID would be for Microsoft Software Shadow Copy provider. The other GUID would be for other providers such as StorageCraft. We will save the GUID, and then delete it. Then restart the machine.
Now when we do vssadmin list providers, we will see only the default Microsoft provider.
I have seen in many cases where our supplier of StorageCraft may not work properly and continue of not not the authors. In such
case, if we get rid of the supplier, then the issue is resolved and not re occurs.
-However this would impede the functionality of StoaregCraft or any other similar to this backup software.
That's why to engage respective software tech support for further assistance.
(5) If a shadow copy is enabled on the volume, make sure that the storage area is set to the default location.
For example:
If we take a snapshot of C: then the storage area should be C:
We are changing that, if we do not have enough free space (at least 300 MB) free.
We can click with the right button on the volume, goto the cliché tab and change it accordingly.
Also note that the minimum value of the storage area should be 300 MB and maximum can be 3000 MB.
We can also set any value between the two, which is a multiple of 300, 600, 900, 1200, 1500 etc... According to the available space.
In the cases where errors in the event viewer on wait times (event id: 12298, 12310, 2004, 12290) then we also need to put the MinDiffArea in the registry.
HKLM/System/CurrentControlSet/Services/Volsnap
Right side, new DWORD VALUE - "MinDiffAreaFileSize" - change and set the value between "300-3000 Mo" or any multiple
300 between the two. Ideally, we can define it on 3000 MB which works even better if we have space.
Ref: http://support.microsoft.com/kb/826936
(6) also, please make sure we have plenty of free space. If we go by the book, a snapshot requires at least 10% of the volume
to be free.
Storage controllers (SCSI/RAID controllers) could also be a problem and may need to be updated.
-
Help - DR4000 and Symantec Backup Exec 2012
We strive to set up a DR4000 with Symantec Backup Exec 2012 VRay Edition.
DR4000 firmware is 1.0.1.1
I created a new container and all NFS and CIFS permissions without restrictions. (Free access)
When I go to add a new drive according to the storage location to BE, everything goes OK until the BE trying to access the share location when I get an authentication error. He seems to BE trying to gain access to the share using the default service account, (which the DR4000 does not of course).
I am a little confused because I thought that if it's full, permissions are enabled on the actions of DR4000, then it does not matter which account is used.
There is also no documentation on how to implement the DR4000 and BE with storage devices open that apparently two support, but all the examples I've seen ignores OSD and uses just a disk path leaves ordinary.
We are stuck with shiny new Dell and DR4000 backup server and no way to use them.
If anyone can help?
Ok. Problem solved. I disconnected the DR4000 of the field, it still wouldn't connect. I joined it to the domain, and then BE could access the share OK. I don't know why it did not work before. A note, why you cannot join the DR4000 to the domain by using the domain administrator account? You must use another account with domain administrator rights.
Maybe you are looking for
-
How to remove all the buttons using userchrome.css
Hello I'm customizing firefox to place within our company and want it as removed as possible. The only things that I could not remove are 5 buttons in the upper right of the screen (bookmark this page, view your bookmarks, downloads display progress,
-
Sometimes when I want to play individual songs, iTunes will appear a window saying I need to authorize my computer first. My laptop is already allowed to play all the songs, I bought on my account and saved in iTunes on my laptop. Yet even after put
-
How do I change of two stages of two-factor authentication?
II were enrolled in two step of checking potatoes for a while but want the safest version of iOS authentication two factor 9. ive tried unenrolling and reenrolling without success. Any tips?
-
A PC with Windows 7 requires MS Vista Service Pack 1?
Dear MS staff I bought a new laptop with MS Windows 7 for my son. I installed a game from EA Games, called "Spore."The game does not work. In the technical notes, the Paralympic Games advises I have download and install MS Vista service Pack 1. No
-
SDK and the incompatibility of the device
I get this error message when I tried to launch my app on the Cascade of gold! Please how do past this issue?