Connect 2 routers, I have a wrt160n

Similar Questions

• Connection to routers RVS4000

  I have 2 routers of RVS4000 that connects to its own cable modem.  I can independently had each network (router) on the other and successfully connect to the internet.  I need to have each router (networks) communicate with each other via ethernet on each router port.  If I am able to connect routers to each other, will they be able to balance the load.

  1. the routers do not have the ability to load balancing.

  2. an installer of subnet: you have set up the first RVS4000 with 192.168.1.1/255.255.255.0 LAN IP address. Configure you the second RVS4000 with 192.168.1.2/255.255.255.0 LAN IP address. Disable you the DHCP server on each time, or on the second. Connect both routers via a LAN port. You assign static IP addresses on the computers that are supposed to use the second router as gateway. If you let the DHCP server on the first race, all DHCP clients will use the first router as gateway.

  3. two subnet settings: you use 192.168.1.1/255.255.255.0 on the first router. You use 192.168.2.1/255.255.255.0 on the second router. You configure a port (e.g. port 4) on the first router in one VLAN different. You enable routing inter - VLAN. Connect the second router to the first router 4 port. You must then configure static routing for the other subnet. I do not have a RVS4000 and the user guide is not clear what are the configuration options. The second router needs to know what gateway to send traffic to 192.168.1.0/255.255.255.0. The first router should already now the static route if she knows that the other VLAN using 192.168.2.0/255.255.255.0 addresses.

• Connect 2 routers on the same network? !!

  Hello

  I can't get this to work...

  I have a modem connected to the ground floor for internet cable.

  I needed an extra blanket so I bought a linksys wrt120n to put on the floor.

  It is connected directly to the modem downstairs via ethernet.

  However I can't get them on the same network (or my clients at least)

  I gave the same SSID and tried various things, but when it is connected to the linksys, sometimes I don't see the pc down and sometimes I can't! ???

  Please, can someone give clear and easy to follow steps on how to get everything on the same network?

  Thank you...

  Here's how to connect several routers in your network. You need a LAN - LAN configuration so check all the computers together. If you use Internet-LAN, the network from the router won't be available outside of the unit.

• Connect 2 routers to extend coverage

  I am about to connect 2 routers with LAN-to-LAN connection to increase the

  coverage of my original poor E2000. I read that some-related posts in the forum

  and 3733 in Cisco KB article:

  (http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=96&s...

  I have a few questions:

  1. in step 5: "click Advanced Routing and change the operating Mode to router '.

  In fact there is NO "operating Mode" in "Setup/Advanced Routing' where is

  This selection?

  2. for installation "wireless security" should both routers use the same mode and

  even passphgase?

  3. If both routers use the same "network name (SSID) '?

  Please help and advise. Thank you very much, have a nice day!

  SLo

  Ignore the advanced routing setting. It is useless with a LAN - LAN connection

  For a mobile network, wireless security settings must be identical. Both should have the same SSID and active SSID broadcast.

• Connecting two routers via a static route

  I have a relatively simple configuration involving a Wireless-N Router and a wireless-B router (several years).  The N wireless router is connected to the internet (via DSL modem) and accepts several DHCP clients without problem.  Wireless - b router is connected to the Wireless-N router.  To do this, I connected the WAN port on the router wireless - b to a port on the router Wireless N ethernet (did not use the uplink). I have a PC connected to the router wireless - b, so I want him to be able to hit the internet, but also be accessible to DHCP clients on the Wireless N router.  The PC connects to the internet successfully, but it does not find clients on the network supported by the Wireless-N router.  It's about my setup:

  B 192.168.55.1 wireless router (LAN) 192.168.56.102 (WAN)

  PC 192.168.55.10 (active dhcp)

  Wireless N 192.168.56.1 (LAN) x.x.x.x (internet)

  (several clients dhcp... 192.168.56.100...)

  I've added a static route in the hope that a computer on the network of the Wireless N router would be able to hit the PC, but nothing helped. I've added a static route as such, on the Wireless-N router, which was the only way that that would enable the web interface:

  Destination LAN 192.168.55.0

  Subnet mask 255.255.255.0

  Gateway 192.168.56.102

  I tried to place the router without wireless - B gateway mode, then router and changed mode, then return.  I can connect to the web interface of the router wireless - b from the PC, and I can connect to the internet from the PC.  Also, the PC is able to reach customers on Wireless N, but the reverse is not true, i.e. clients on Wireless N can't find clients on the wireless - B network. Also, I turned on the port forwarding on the router wireless - B so that it points to the PC, in the hope he would lead all traffic to the PC, but still cannot access PC.  How to configure both routers (or both set up as access point?) so that clients on the Wireless N Router can talk to customers on the wireless router - B?  For now, all customers are on DHCP, but finally, I would like to create static entries for at least two or three of them.

  Thanks in advance

  Are Linksys routers teas? If so what model is router B? It may not supported for a DHCP client port forwarding. Even if you can get the port forwarding to work for a client on router B, it will not work for several clients.

  In addition, if you have the option in router B, disable the SPI Firewall. It is the cause of the problem, in my opinion. If you do this, you should port forward.

  Is there a reason that you connect the routers via the WAN port on the router B? You could uplink using an ethernet port on the B to an ethernet port on the N and avoid all this... You can always configure router B as a point of wireless access for specific customers.

• When you try to export images of Photos, I get an error message saying that I am unable to do it because I need an internet connection. That I have. Any ideas?

  When you try to export images of Photos, I get an error message saying that I am unable to do it because I need an internet connection. That I have. Previously, I was able to simply select, make drag & drop in a folder open access to change. Any ideas?

  When you try to export images of Photos, I get an error message saying that I am unable to do it because I need an internet connection.

  Could something intercept Internet to iCloud photo library and cause delays? A firewall or Antivirus filter?  Have you recently installed software?

• My toshiba laptop is not getting connected wireless if I have SID and key no.

  I have the model Toshiba Satellite laptop and I am not able to connect to a wireless home line. If I have SID and no. Key, my laptop is not be connected. I used it earlier.

  You will be please to restore the settings the parameter as he cites the 87122 defect.
  Thanking you,
  Manguin
  / * original title: my computer is toshiba laptop connect wireless if I have SID and key no. I * /.

  Have you applied the hotfix in this article?

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

• How to get Cisco Connect if I already have various Linksys products...

  Hello

  How can I get a copy of Cisco Connect if I already have a different linksys product?

  WRT610N

  WET610N

  DMA2200

  Thank you

  John

  Cisco Connect is only available for the new version of router... like E1000, E2000, E3000, M10, M20. I hope this helps.

• How to connect my phone I have with my computer

  How to connect my phone I have with my computer?

  Hello

  Try the Apple discussion groups

  https://discussions.Apple.com/community/iPhone/iphone_hardware?view=discussions&tagSet=1181

• Im having truoble internet connection, even if I have a signal and everything is connected

  Im having truoble internet connection, even if I have a signal and everything is connected.  I ran the repairs and doing what he had asked, however I am still unable to connect to the internet?

  I have a WiFi router, and even if my desktop pc lacks a coneection wirless, I bought a wireless adapter for it, so I can connect to the internet, but there is a problem with the connection.  everything worked fine and then it just stopped and refuses to connect. I run the diagnostic report and followed the instructions but it does not connect truncated.  What can I gdo now?

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps mentioned in the links below

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)

  Method 2:

  Follow the steps mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

• Several passwords for pop account are lost and the remote DESKTOP connections is no longer have registered credentials after logging out of the laptop to the domain and rebooted.

  Original title: passwords lost after reboot

  I have a user with multiple pop accounts and multiple rdp servers to which it connects

  When the laptop is connected to the domain he is allowed to save the credentials of rdp as usual and also its pop accounts work fine

  If the laptop is removed from the dock and hibernating come off hibernation works very well

  the problem starts when it restarts in fact the laptop when it is on the road.

  When he goes in outlook passwords for pop account are lost and all its Remote Desktop connections is no longer have recorded identification information

  his outlook passwords will save is no longer and rdp connections will save is no longer

  Once he returned to the office and connects back to the field all his pop account passwords are restored, the credentials of the rdp remain missing, but it can re - save them

  any ideas where to look for problem

  I also noticed inot laptopn with another user and will not experience the issue

  Hi, Robert Allen,.

  Thanks for posting your question in the Microsoft Community Forum.

  According to the description, you have a user facing problems with multiple pop accounts and rdp credentials when the connection / disconnection of a domain.

  Since the problem is associated with multiple pop accounts and rdp credentials when the connection / disconnection of a domain, the question you posted would be better suited for the IT Pro on TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 networking TechNet Forums

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Windows 7. I recently had problems with loss of internet connection. When I have trouble Shooting, told me that impossible to find a driver.

  I have a desktop running Windows 7 PC.  I recently had problems with loss of internet connection.  When I have trouble Shooting, told me that impossible to find a driver.  The adapter does not appear in Device Manager.  Help!

  Hello

  Definitely looks like a problem with the network device. Check with sound
  Support, their books online, the drivers and ask in their forums (if any)
  on known problems. If there is a control of the device shipped with the system
  Manufacturer (manufacturer of motherboard for customized systems). If a device check separated
  with the support of its creator and other resources.

  You could also remove or disable the device and try a new add-on as one
  new card or device USD. None of those who are dear.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I tried to update and when I try to connect I get "you have been disconnected" and it will not let me go further.  What happens here?

  I tried to update and when I try to connect I get "you have been disconnected" and it will not let me go further.  What happens here?

  Hi Daryl

  Please follow: error "You have been disconnected" whenever I try to connect to the Cloud creative office application.

  See if that helps.

  Thank you

  Varun

• problems opening program. said the service is currently unavailable. Try later or check the connections networki. I have windows 7. I am connected with everything else. I have phontshop elements 10. bought new.

  I spoke with a number of people. (cats). Why when I try to open 10 items that I installed, it says "service is currently unavailable.  Try more later or check the network connections.

  I have connections on all the rest. It is new, has never been used. bought at Office Depot.  I can't save my numbers if I can't connect.

  Thank you

  Nancy

  See if the suggestions in this link to help you:

  Log, activation, or connection errors. CS5.5 and later, CC, DC Acrobat

  Kind regards

  Guinot

• Hi I have a problem to connect on wifi I have reset all the setting ang simultaneously press the home buttom ang poewr but not wrking buttom, I can't and on the router because I was on a public area as hotel thank you

  I have 5 16 g model A1428 phone

  FCC ID * A IC * A IMEI; ***

  I TRY TO OPEN MY PHONE TO CHANGE THE BATTREY AND REMOVE THE LCD CABLE TO CHANGE THE POWER ON SWITCH, BUT UP TO THAT ONLY TO REMOVE THE LCD SCREEN, I GAVE ALL MY BECAUSE IS DIFFICULT... WHEN I PUT I CAN NOT CONNECT TO WIFI.

  I TRY to RESET all THE SETTING or RESET or PRESS TOGETHER HOME BUTTOM AND POWER SWITCH ONLY MARKET THE ROUTER NETWORK I can't DO it BECAUSE it OF in CRUISE BOAT or in public space...

  Thank you!

  ALFREDFROMTAGBILARAN

  < personal information under the direction of the host >

  Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Please see recommended settings of WiFi routers and Apple access points
  4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  5. Settings - WiFi - < network name > - Click on forget network - do a restart forced 4 and then again add the network
  6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  9. Backup the device to iTunes - restore as NEW (no backup) using iTunes - see if solves problem - if yes - restore backup
  10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.