Connect a new server in SAN

Similar Questions

• FF restarts after update one opens a new box that says update highly recommended when I click on next FF is unable to connect to the server, it's been going on for two weeks. What continues?

  FF says that an upgrade is available. After that has been done and restarted FF another window opens saying that a very important (urgent) update is nesscary, when I click on the button NEXT, a progress bar appears and says the connection to the server, but NEVER seems to connect, and no matter how long I leave it does NOT connect. It just sits there trying to connect while I use FF.

  Do a clean install (re)-:

  • Download a new copy of Firefox and save the file to the desktop.
  • Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  • Do not remove the data of a personal nature if you uninstall the current version.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• I have a new server and you cannot use Remote Desktop connection.

  I HAVE A NEW SERVER (HP ML110 G6) AND HAVE USED OLD HARD DISKS, BUT MY REMOTE DESKTOP CONNECTION WILL NOT ME OR OTHERS - WHAT COULD THE REASON BE?

  Hello

  I suggest you to try the steps below and check if it helps.

   The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.
  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  May also need to do this on other computers as well.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• Unable to connect to groups of news, says I can't connect to the server.

  original title: focus groups

  cannot connect to discussion groups; Guard saying can't connect to servers not real savy but can follow directions. Email from RR that much memory (comm.) want just to be able to get the hip and read some interesting things stations-News-ideas

  Follow the instructions provided by the manufacturer of any news reader application you have installed.  You may need to contact the administrator of the desired news server for configuration and authentication instructions.  (You kept this information key to yourself, so no one can help you.)

• I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all s

  I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all of the site?

  If you don't have local copies of your site on your computer...

  1 create a new Site definition using your old FTP GS-01 information: definition of a new site. Learn Dreamweaver CS5 & CS5.5 | Adobe TV

  2. Once you have the defined site and can connect, click on the Get (down arrow) command in the files Panel

  3 when you are prompted to hit "get the entire Site? Yes

  4. After downloading the entire site, navigate to the Site > Manage Sites > click the site > Edit > servers > click on the remote server > Edit to enter your new GoDaddy FTP Info

  5. after the test connection to check, you can connect, click the command Put (up arrow) in the files Panel

  If you have a site already defined for your old Web host, go to #4 above.

• I can't create a new site of catalyst for business with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with the server, try again later. How can I solve this problem?

  I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?

  Thank you

  Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver.  It may have been a conflict of name or something.

  Concerning

  Adrian

• Install of new problem-unable to connect to the server from a remote client DB.

  Hi experts,
  
  I am new to set up a server oracle so pls bear with me...
  
  I have install a db Server (11g on top of Oracle Linux 64 bit) home (192.168.1.90 static). I checked that db, listener are running. However, I tried to connect to the server from a different client machine (192.168.1.108) within my home network, but the server is not reachable. I got a ping from client and the server using IP addresses and host names. I followed the following steps to troubleshoot but could not go beyond the step 3, the server on port 1521 telnet-ing. Can someone help me what I need to do to make the port # (1521) is accessible by the customer?
  
  
  1. check with the 'ping' using the IP ('ping 198.11.34.43'
  2. check with 'ping' using the DNS (for example "tnsping uranus")
  3. try telnet to the IP address on port 1521 (telnet 1.2.3.4 1521)
  4. check with "tnsping" using the TNS service name
  5 call SQL * more of the line command «sqlplus fred@flintstone» operating system If this does not work, make sure your receiver is the defined service of flintstone.
  6 sign - on to SQL * more and connect with the name TNS ('connect fred/flintstome@service_name'
  7 in SQL *, try a select table@remote_db_link
  
  Thank you very much in advance.

  Hello
  (1) problem can be because of the firewall. Please check if the firewall turned on for your environment
  (2) check sqlnet.ora, you can allow requests only from specific systems

  Thank you
  Krishna

• Move Adobe Connect 7.5 to new server hardware

  What is the process to move Adobe Connect to a new server hardware. We are running Adobe Connect Pro 7.5 (7.5.1.0.100) on a Win2K3 SP2 server. We would like to fly over Connect to a new server hardware running Win2K8 R2 (64-bit). The Connect database will remain on a separate Win2K3 SP2 / Server sp4 of SQL 2005.

  Unless there's a problem, the NETBIOS name of the computer will be different. However, the IP address and domain name FULL will remain the same.

  What is the recommended procedure to achieve this?

  PS - Shortly after moving to new hardware, we are planning to upgrade to Connect 8. Is it better to upgrade first, then move to new hardware? Or vice versa?

  Hello

  moving to new hardware is basically a new installation on the new server, and then passing on the saved content, and then reconnect to the database.

  It makes no difference if you update first and then move material or play first and then upgrade. I play first and make sure Connect works very well on new hardware, and then upgrade.

  Here are some steps which should work.

  1. make sure that your new hardware, OS and SQL Server are supported

  http://help.Adobe.com/en_US/connect/8.0/installconfigure/connect_8_install.PDF

  (7.5 check the requirements here: http://www.adobe.com/products/acrobatconnectpro/systemreqs/#proserver )

  2. make a backup of your current content directory and all custom configuration files.

  (config files will be a reference to restore SSL or other changes, not just move them at once updated).

  3. make a backup of your database and make sure you know the login and the password for your SQL Server.

  4 stop the services on the old server

  5. If moving DB, attach your DB Backup to the new host SQL.
  6. install Connect on the new hardware.

  7. do not start the services again, first restore the backup content.

  8 start services, bring up the console and connect to the DB.

  9. check your settings in the console, a reboot may be necessary first.

  10. do not load the login page?

  11. follow the installation guide for step 1 for re - apply SSL config if necessary (in Connect 8 it is slightly different from that of C7)

  Change the name of windows machine, may cause some trouble, not always, but it is easier to use just the name of the new material.

  If this isn't an option, an entry in the DB conenct must be updated:

  http://kb2.Adobe.com/CPS/407/kb407446.html

  I'm pretty sure that these steps will work, but can't test this and I don't know your exact environment, so I can give no guarantee that this will work. It is always good to simply moving to a new test equipment and if things go wrong, bring back the old system of support of production and contact.

  Good luck!

  Kay

• JDBC connection to sql server new to 11.2?

  Hello experts,
  
  in the "Oracle® Warehouse Builder Sources and targets Guide 11 g Release 2 (11.2) Chapter 6 connection via JDBC Data Sources.
  There is a documentation on how to connect to SQL Server with a Driver for JDBC connection.
  
  This is a new feature of the OWB 11 g Release 2 (11.2) or the jdbc connection is also possible with 11.1 OWB but undocumented?
  
  Thanks in advance
  Ed
  
  Edited by: user11978426 the 13.01.2010 18:05
  
  Edited by: user11978426 the 13.01.2010 15:06

  Hi Ed

  As Carsten mentions his new and also more than simple JDBC, mapping can be set up and out of the box or customized models code assigned to the execution units. This allows you to have the use of two models of code based on the standards or in bulk models style movement data.

  There are a few messages from Mark Rittman on SQL Server using these mappings in GR 11, 2 here:

  http://www.rittmanmead.com/2009/09/21/code-templates-in-owb11gr2-part-1-Introduction-and-support-for-heterogeneous-databases/
  http://www.rittmanmead.com/2009/09/21/code-templates-in-owb11gr2-part-2-introduction-to-code-template-mappings/
  http://www.rittmanmead.com/2009/09/22/code-templates-in-owb11gr2-part-3-hybrid-code-template-mappings/
  http://www.rittmanmead.com/2009/10/10/changed-data-capture-and-owb11gr2/

  I just posted a series on MySQL who see the error handling and export in bulk using MySQL:

  http://blogs.Oracle.com/warehousebuilder/2010/01/owb_11gr2_mysql_open_connectivity.html
  http://blogs.Oracle.com/warehousebuilder/2010/01/owb_11gr2_mysql_error_detection.html
  http://blogs.Oracle.com/warehousebuilder/2010/01/owb_11gr2_mysql_bulk_extract.html

  See you soon
  David

• Connecting to vCenter Server 4.1 - new installation

  VMware ESXi 4.1.0 build-348481

  VMware vSphere Web Access Version 4.1.0 Build 426686

  VMware vCenter Server Version 4.1.0 Build 491557

  VMware vSphere Client Version 4.1.0 Build 491557

  I used vSphere Client to access a single ESXi host for some time.  No problem with the single host management.

  It is my first installation of vCenter Server (on Windows Server 2008 R2 Standard 7601 Service Pack 1).

  As Microsoft IIS Web server was already running on this host, I used alternative ports for tomcat services:

  80 > 8080

  443 > 446

  Web Services-> 8081

  When I connect to localhost:446, I can open a vSphere Web Access session and see the following:

  

  How to contact the ESXi host and view its inventory this server?

  Then I tried using vSphere Client to administer the server vCenter Server, but cannot connect.  The error is:

  "A communication error has occurred when sending data to the server. (The underlying connection was closed: an unexpected error occurred on a send.) »

  It doesn't matter if I run the Client vSphere on the same host as the center of vSphere, or a remote host.

  I tried to use the IP addresses and host names.  No difference.

  I have disabled the firewall on the host vSphere Center.  No difference.

  Both host ESXi and vCenter Server have valid license keys.

  What should I do to get vSphere Client to connect to the server from vSphere?

  Hello

  I change ports instead IIS as vCenter server, but if you use port 446 you specify port (446) thatcustom in vSphere client as well. In the field of connection for the vSphere client

  How to contact the ESXi host and view its inventory this server?

  After establishing the connection with vCenter server, you must create the object data center and add your ESXi autonomous server to vCenter server. After you will see ESXi inventory in vCenter server

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Cannot get mail that failed to connect to my server

  Cannot get mail

  Failed to connect to my server

  Hello parkspa,

  Thank you for using communities Support from Apple. I know have a problem with Mail on your iPhone, it's not what you expect. The good news is the next article will be useful for troubleshooting and solving your problem and get email working again on your iPhone:

  Get help with Mail on iPhone, iPad and iPod touch

  See you soon!

• Problem connecting to the server after moving

  Hi, I keep getting the message "there is a problem connecting to the server"192.168.0.19"etc. This happened after I moved. New ISP, new router. I have an Airport Express and a NAS connected to it. Time Machine and Icloud on the NAS. I think that the NAS has this IP address before moving. There are now 192.168.10.176. Everything works, but I get the pop up frequently.

  I look at the accounts and start but nothing. I reboot safe mode does not remove the problem. So, what can I do?

  I'm on Yosemite with MBR.

  Can you connect using the new IP address?

• Connection to the server. Why 2?

  I had issues with a new Synology NAS and I believe that I made a mistake when you configure.

  I tried for several days to make a Time Machine backup without success.

  Today, I noticed that the Synology is accessible by at least 2 channels - 1 is the afp:------name I called him when you configure (imagination DS916!) or the other way is the address afp:\\IP.

  The address "name" appears in the column of my Mac Finder and can be accessed at any time. The address of 'number' should be accessible via the Finder / go / connect to the server, and I'm asked to mount one or more discs (basically shared folders).

  I changed the backup drive TM at the address of 'number' instead of 'name' address (they both presented) and it seems to work! Hallelujah!

  So how is it, I have 2 addresses and is likely to cause any other annoyances? How can I get rid of one?

  Thank you very much for any help offered. I asked at the forum Synolgy a few days ago but had no answers... Thank you.

  the system is supposed to be supported by synology but not by apple and apple don't fix other issues of software developers.

  You can read this for more insight as to the nature of the problem.

  http://pondini.org/TM/2.html

  also your MBA does not run iOS and to greater clarity, you must change your profile to show your good version of OS X (not iOS) running on your laptop. Thank you.

• iPhone cannot connect to the server to iCloud

  Hello!

  My son IPhone cannot connect to the server iCloud. App Store is not available. In the iTunes and App Store from the settings app, I can't log in. IPhone resetting is not possible. Restore from iTunes on Mac is not possible, because find my iPhone is active on the iPhone, and it cannot be turned off, because in the pane of the application of the iCloud settings can't do anything until I have to accept the new terms and conditions, which cannot be made.

  WiFi on the phone works great with Safari, Mail, but cannot get new e-mail messages. The weather application does not connect.

  His iPad that is connected to the same iCloud account has no problem and there is no problem to connect to his account on iCloud.com.

  I tried to restart and reset hard iPhone and updated to 9.3.4 via iTunes on Mac (which went without pain, but doesn't change anything).

  Any help much appreciated!

  Does anyone have advice at all...? Aside from throwing the thing?

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.