CONNECT IN a loop in the user data

Similar Questions

• Hierarchical query, connect in a loop in the user data

  Hello
  
  Is there a method to find the node that has the problem in the application of the factorial.
  
  As my data is complex and has up to 10 levels, it is not possbile to correct manually. I have idendtified the series 'START WITH', what is causing the problem. But I couldn't find the correct nodes in the seris that creates the loop.
  
  Does not not in the management of exceptions even.
  
  Please advice.
  
  Kind regards
  Benz

  You did not specify a version, but the operators CONNECT BY NOCYCLE and CONNECT_BY_ISCYCLE can be used to detect cycles.

• Hi, do an error-ORA-01436: CONNECT BY a loop in the user data

  Hi, I am getting an error when executing the select query
  
  SELECT callreleasetime, calleventduration
  OF temp_med_partial_records_0001
  CONNECT BY PRIOR Callreleasetime = callreleasetime
  AND IMSI PRIOR = IMSI
  AND PRIOR connectedcallingnumber = connectedcallingnumber
  
  Published by: user8731258 on February 8, 2011 02:34

  example:

  drop table test;
  
  create table test(no number, IMSP number,  IMSC number,  data varchar2(10));
  
  insert into test values(1,1,2,'a');
  insert into test values(1,2,3,'a');
  insert into test values(1,2,4,'a');
  
  insert into test values(1,3,5,'b');
  insert into test values(1,4,5,'b');
  
  insert into test values(2,1,2,'c');
  insert into test values(2,2,3,'c');
  
  insert into test values(4,1,2,'d');
  insert into test values(4,2,3,'d');
  
  insert into test values(5,1,2,'e');
  insert into test values(5,2,3,'e');
  insert into test values(5,2,3,'e');
  
  insert into test values(6,1,2,'f');
  
  commit;
  

  SELECT *
  FROM test
  CONNECT BY PRIOR no=no
  AND PRIOR IMSP=IMSC
  AND PRIOR data=data;
  
  NO                     IMSP                   IMSC                   DATA
  ---------------------- ---------------------- ---------------------- ----------
  1                      1                      2                      a
  1                      2                      3                      a
  1                      1                      2                      a
  1                      2                      4                      a
  1                      1                      2                      a
  1                      3                      5                      b
  1                      4                      5                      b
  2                      1                      2                      c
  2                      2                      3                      c
  2                      1                      2                      c
  4                      1                      2                      d
  4                      2                      3                      d
  4                      1                      2                      d
  5                      1                      2                      e
  5                      2                      3                      e
  5                      1                      2                      e
  5                      2                      3                      e
  5                      1                      2                      e
  6                      1                      2                      f   
  

  Your case

  SELECT *
  FROM test
  CONNECT BY PRIOR no=no
  AND PRIOR IMSP=IMSP
  AND PRIOR data=data;
  
  ORA-01436:
  

• error ORA-01436: CONNECT BY a loop in the user data

  Y is it breaks down, when the query with the data of test works well. Added the result of individual queries of the database.
  times parent_order and the order can be same.
  

  SELECT *
    FROM (SELECT     *
                FROM r_brj_linkage
          START WITH order_id = 'IQBGSR20'
          CONNECT BY PRIOR parent_downstream_orderid = order_id)
   WHERE alternate_linkage_rule_flag = 'N'
  
  SELECT parent_downstream_orderid, order_id, alternate_linkage_rule_flag
    FROM r_brj_linkage
   WHERE order_id = 'IQBGSR20';
  output 
  ------------
  U206650.3     IQBGSR20   Y
  
  
  SELECT parent_downstream_orderid, order_id, alternate_linkage_rule_flag
    FROM r_brj_linkage
   WHERE order_id = 'U206650.3';
  
  U206650.3      U206650.3  N

  I tried with an example, and gives me the correct results

  SELECT *
    FROM (WITH t AS
               (SELECT 'XXX' parent_1, 'YYY' child_1, 'Y' flag
                  FROM DUAL
                UNION ALL
                SELECT 'XYZ' AS parent_1, 'XXX' AS child_1, 'Y' AS flag
                  FROM DUAL
                UNION ALL
                SELECT 'ZZZ' AS parent_1, 'XYZ' AS child_1, 'Y' AS flag
                  FROM DUAL
                UNION ALL
                SELECT 'ABC' AS parent_1, 'ZZZ' AS child_1, 'N' AS flag
                  FROM DUAL)
          SELECT     *
                FROM t
          START WITH child_1 = 'ZZZ'
          CONNECT BY PRIOR parent_1 = child_1)
   WHERE flag = 'N';

  Published by: devarade on January 21, 2010 14:56
  
  Published by: devarade on January 21, 2010 15:06

  Ah, see what you mean now.

  How about this:

  SELECT *
  FROM  ( WITH t AS
               ( SELECT 'XXX' parent_1, 'YYY' child_1, 'Y' flag
                 FROM DUAL
                 UNION ALL
                 SELECT 'XYZ', 'XXX', 'Y' FROM DUAL UNION ALL
                 SELECT 'ZZZ', 'XYZ', 'Y' FROM DUAL UNION ALL
                 SELECT 'ZZZ', 'ZZZ', 'N' FROM DUAL )
          SELECT *
          FROM   t
          START WITH child_1 = 'YYY'
          CONNECT BY NOCYCLE PRIOR NULLIF(parent_1,child_1) = child_1 )
  WHERE flag = 'N';
  

• ORA-01436: CONNECT loop in the user data when the delimited string splitting by the

  I'm trying to split a string into records. The values are three characters more '-' with a limit of 12 values. The values themselves are a combination of two data, the first being two characters, a.

  The following example translates: ORA-01436: CONNECT BY a loop in the user data

  WITH
      Data(Code, Datum)
  AS
      (
       SELECT 'VGCU3VM', '00V-YYG-BVC-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL
       SELECT 'VGAU3VM', '00V-YYG-BVA-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL
       SELECT 'VGLN3CM', '00V-YYG-BVL-PIN-DV3-EVC-TVM-' FROM Dual UNION ALL
       SELECT 'VGLT3PM', '00V-YYG-BVL-PIT-DV3-EVP-TVM-' FROM Dual UNION ALL
       SELECT 'VGAT3RA', '00V-YYG-BVA-PIT-DV3-EVR-TVA-' FROM Dual
      )
  SELECT
      Datum,
      LEVEL,
      SUBSTR(Datum, ((LEVEL - 1) * 4) + 1, 2),
      SUBSTR(Datum, ((LEVEL - 1) * 4) + 3, 1)
  FROM
      Data
  CONNECT BY
      Code    = PRIOR Code
      AND    LEVEL    <= LENGTH(Datum) / 4;
  
  

  Remove the 'Code = Code PREREQUISITE"clause, to avoid the error, but too many records are returned, because nothing is to limit the records in their own groups.

  The following works:

  WITH
      Data(Code, Datum)
  AS
      (
       SELECT 'VGCU3VM', '00V-YYG-BVC-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL
       SELECT 'VGAU3VM', '00V-YYG-BVA-PIU-DV3-EVV-TVM-' FROM Dual UNION ALL
       SELECT 'VGLN3CM', '00V-YYG-BVL-PIN-DV3-EVC-TVM-' FROM Dual UNION ALL
       SELECT 'VGLT3PM', '00V-YYG-BVL-PIT-DV3-EVP-TVM-' FROM Dual UNION ALL
       SELECT 'VGAT3RA', '00V-YYG-BVA-PIT-DV3-EVR-TVA-' FROM Dual
      )
  SELECT
      Datum,
      SUBSTR(Datum, ((Some.Num - 1) * 4) + 1, 2) A,
      SUBSTR(Datum, ((Some.Num - 1) * 4) + 3, 1) B
  FROM
      Data,
      (SELECT LEVEL Num FROM Dual CONNECT BY LEVEL <= 12) Some
  WHERE
      SUBSTR(Datum, ((Some.Num - 1) * 4) + 1, 2) IS NOT NULL;
  
  

  What causes ORA-01436?

  Hello

  Depending on your version, you can add another condition to your CONNECT BY clause.

  It works in Oracle 11.2.0.3.0:

  SELECT

  Point of reference,

  LEVEL,

  SUBSTR (Datum, ((LEVEL-1) * 4) + 1, 2),

  SUBSTR (Datum, ((LEVEL-1) * 4) + 3, 1)

  Of

  Data

  CONNECT

  Code = Code PRIOR

  AND LEVEL<= length(datum)="">

  AND PRIOR SYS_GUID () IS NOT NULL-* ADDED *.

  ;

  Thanks for the display of the data of the sample; This is really useful!

  In addition, relational databases are designed to have 1 piece of information in each column of each row, not a list delimited by up to 12 points.  It is so basic to the design of database he called the first normal form.  You're going to solve a lot of problems even before they occur if you paste to first normal form and change the table structure to resemble the result set of this query.  (Maybe that's exactly why you're doing this query.)

• Error: CONNECTION loop in the user data

  CONNECT IN a loop in the user data:

  Table X (sample data were actually lines 35K)

  --------------

  CODE CASE OLD_ID New_id PERSON AUTH                                                           

  01 ab122 1234 0001 AU123 99393

  07 vv353 7872 0919 FV982 78282

  01 ab122 1982 9929 99393 AU123

  04 hjsss 8839 8302 JK920 32320

  01 ab122 0001 1982 AU123 99393

  05 cg899 6728 32322 IKL020 65252

  07 w353 0919 8282 FV982 78282

  now I need to order these data comparing the values of the line to old_id new_id for each combination of code, person, case

  need output like below

  Table X

  --------------

  CODE CASE OLD_ID New_id PERSON AUTH                                                           

  01 ab122 1234 0001 AU123 99393

  01 ab122 0001 1982 AU123 99393

  01 ab122 1982 9929 99393 AU123

  04 hjsss 8839 8302 JK920 32320

  05 cg899 6728 32322 IKL020 65252

  07 vv353 7872 0919 FV982 78282

  07 w353 0919 8282 FV982 78282

  to get to what I use:

  -Request-

  Select * from table_x

  Start by old_id not in)

  Select new_id

  from table_x

  )

  CONNECT BY old_id new_id PRIOR =

  AND code = code PRIOR

  AND case EARLIER case =

  PER person = person PREREQUISITE

  -Request-

  works very well with the sample data, but the problem is when executed with actual table that has 35K record...

  Cause: The condition specified in a CONNECT BY clause caused a loop in the application, where the next record to be selected is a descendant of itself. When this happens, it may be no end to the query.

  Action: Check the CONNECT BY clause and remove the circular reference.

  Thank you

  AK

  Hello

  CONNECT_BY_ISCYCLE is a pseudo-column that you can use in a query of CONNECTION BY NOCYCLE.  It is separated from the CONNECT BY clause.

  Try this:

  Select code, "BREAKS", person

  , SYS_CONNECT_BY_PATH (old_id, "/") AS path

  from table_x

  where CONNECT_BY_ISCYCLE = 1

  Start by old_id not in)

  Select new_id

  from table_x

  )

  CONNECT BY NOCYCLE Old_id = new_id PRIOR

  AND code = code PRIOR

  AND 'CASE' = 'BOX' PRIOR

  PER person = person PREREQUISITE

  ;

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• ORA-01436: CONNECT loop in the user data, but CONNECT_BY_ISCYCLE is equal to ZERO all the

  Hello
  
  When I run query below, it always throws the below error:

  SELECT connect_by_root code AS code_root,
      CODE,
      CODE_DESC,
      UP_CODE 
    FROM DI_CODE_LEVEL
    WHERE TYPE_CODE='SP'
      CONNECT BY PRIOR CODE=UP_CODE;
  
  ORA-01436: CONNECT BY loop in user data
  01436. 00000 -  "CONNECT BY loop in user data"

  But when I use NOCLYCLE and CONNECT_BY_ISCYCLE to see which line is in question.
  It shows nothing, which means CONNECT_BY_ISCYCLE = ZERO for all rows.

  select * from (
      SELECT connect_by_root code AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE ,
          CONNECT_BY_ISCYCLE AS ISCYCLE
        FROM DI_CODE_LEVEL
        WHERE TYPE_CODE='SP'
          CONNECT BY NOCYCLE PRIOR CODE=UP_CODE
      ) 
  where ISCYCLE>0;

  Is there another reason that sql would lift ORA-01436?
  If there is a loop, then will the combination of NOCYCLE, CONNECT_BY_ISCYCLE will show?
  
  Thank you

  Hello

  Apparently, one or more of the "SP" lines are at the origin of the problem.
  The WHERE clause is applied after the CONNECT BY is finished, saying:

  select * from (
      SELECT connect_by_root code AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE ,
          CONNECT_BY_ISCYCLE AS ISCYCLE
        FROM DI_CODE_LEVEL
        WHERE TYPE_CODE='SP'
          CONNECT BY NOCYCLE PRIOR CODE=UP_CODE
      )
  where ISCYCLE>0;
  

  is equivalent to

  select * from (
      SELECT connect_by_root code AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE ,
          CONNECT_BY_ISCYCLE AS ISCYCLE
        FROM DI_CODE_LEVEL
          CONNECT BY NOCYCLE PRIOR CODE=UP_CODE
      )
  WHERE    TYPE_CODE = 'SP'
  AND     ISCYCLE   > 0;
  

  To see where the loop occurs, you must include the lines where type_code = "SP".

  When you debug "ORA-01436: CONNECT IN a loop in the user data ', view SYS_CONNECT_BY_PATH (uk,...), where the United Kingdom is a unique key. That will tell you much more than just the root information. You might want this:

  SELECT  connect_by_root code                AS code_root,
          CODE,
          CODE_DESC,
          UP_CODE
  ,     SYS_CONNECCT_BY_PATH (code, '/')     AS path          -- For debugging
  ,       CONNECT_BY_ISCYCLE                AS ISCYCLE     -- For debugging
  FROM      DI_CODE_LEVEL
  -- WHERE TYPE_CODE = 'SP'     -- Commented out for debugging
  where      ISCYCLE > 0          -- For debugging
  CONNECT BY NOCYCLE      PRIOR CODE = UP_CODE
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements), and the results you want from this data.
  Explain how you get these results from these data.
  Always tell what version of Oracle you are using.

• ORA-01436: CONNECT loop in the user data

  Hello
  
  I have a simple bit of SQL out details on HR supervisor strings in Oracle EBS:
  

  SELECT     LPAD(' ', (LEVEL - 1) * 10, ' ') || person_id level_label
           , LEVEL
           , description
        FROM applsys.fnd_user u
           , hr.per_all_assignments_f h
       WHERE u.employee_id = h.person_id
  START WITH SYSDATE BETWEEN effective_start_date AND effective_end_date
         AND person_id = :personid
  CONNECT BY PRIOR person_id = supervisor_id
         AND SYSDATE BETWEEN effective_start_date AND effective_end_date

  It will return data normally without problems - e.g. data dummy below - looks very good. The names and made up person_ids.
  

  LEVEL_LABEL                    LEVEL     DESCRIPTION
  000001                         1     Person Person 1
            000002               2     Harry Marry
                      000003          3     John Smith
                                000004     4     Jenna Jones
                                000005     4     Her Name
                                000006     4     His Name
                                000007     4     Joseph Coat
                                000008     4     Les Miserables
                      000009          3     Mister Smith
                      000010          3     Miss Jones
                      000011          3     Andrew And
                                000012     4     Claire So
                                000013     4     Hilary Hi
            000014               2     Jenny Jones
                      000015          3     Amanda Mandy
                                000016     4     James Jim
                                000017     4     William Wonder
                                000018     4     Crazy Cat
                                000019     4     Silly Cat
                                000020     4     Tall Hill
                                000021     4     Amazing Grace
                      000022          3     Lovely Mountain
                                000023     4     Joyous Spring
                                000024     4     Anonymous Name
                                000025     4     Brian Binky

  However, if I try for an another person_id, for which a user receives an error in one part of the Oracle EBS, I get this error:
  
  ORA-01436: CONNECT loop in the user data
  
  I'm guessing there is a loop of supervisor happening somewhere, but I don't know how to determine where it might happen.
  
  I was wondering if there is any way I can change the SQL code to be able to work out where the loop can be, as there are about 50 people involved in Ministry to this user and I have been through all their records and can not see a loop to look through the Oracle HR screens.
  
  I know it's a 'big ask' to ask a vague question about some oracle SQL, so apologies for that.
  
  Any advice much appreciated.
  
  Thank you

  Hello

  To see loops, do something like this:

  SELECT     SYS_CONNECT_BY_PATH (person_id, '/')     AS path
  FROM      applsys.fnd_user           u
  ,      hr.per_all_assignments_f      h
  WHERE      u.employee_id           = h.person_id
  AND     CONNECT_BY_ISCYCLE     = 1
  CONNECT BY NOCYCLE     PRIOR person_id = supervisor_id
       AND           SYSDATE      BETWEEN     effective_start_date
                           AND      effective_end_date
  ;
  

  If you would care to post CREATE TABLE and instructions INSERT for some samples, so I could test it.

  Note there is no START WITH clause.

  If, for example, Jones is the architect of Scott, Scott is the main contractor of Adams and Adams is the architect of Jones (much to other lines is not involved in a loop), then displays 3 rows of output, such as

  PATH
  ---------------------
  Jones/Scott/Adams
  Scott/Adams/Jones
  Adams/Jones/Scott
  

  Moreover, all the same CONNECT BY queries on these tables can be a lot faster if you've made the join and date filtering in a separate subquery first:

  WITH     combined_data     AS
  (
       SELECT     person_id, supervisor_id
       FROM      applsys.fnd_user           u
       ,      hr.per_all_assignments_f      h
       WHERE      u.employee_id      = h.person_id
       AND     SYSDATE      BETWEEN     effective_start_date
                      AND      effective_end_date
  )
  SELECT     SYS_CONNECT_BY_PATH (person_id, '/')     AS path
  FROM     combined_data
  WHERE     CONNECT_BY_ISCYCLE     = 1
  CONNECT BY NOCYCLE     PRIOR person_id = supervisor_id
  ;
  

• ORA-01436 - connect loop in the user data - only in the database 10G...

  Hello
  
  I'm having a problem with a query. First of all I have to say that I choose this query on the internet and has adapted to my worries... so I understand very well the "connection of level" clause... that's why I need help to find out what is happening here...
  
  The query is all ok in a 8i database, but if I took exactly the same query on a 10G database I got the error "ORA-01436 - connect with loop in user data.
  
  This query returns one row for each day between 2 dates passed as parameters. The query takes 4 parameters: a date 'from', date 'for' and 2 other parameters indicating if we want that Saturdays and Sundays (end of week) in the result set.
  
  This is the query:
  
  Select days_between.days
  de)
  SELECT & date_from + ROWNUM-1 days
  DE)
  SELECT 1 nothing
  OF THE DOUBLE
  CONNECTION OF LEVEL < = (nvl(&date_to,&date_from) - & date_from + 1)
  )
  where & date_from + ROWNUM-1 < = nvl (date_to, & date_from)
  ) days_between
  where (nvl (& exclude_saturdays, 'Y') = ' or replace (to_char (days_between.days, 'DAY'),' ') not in ('SATURDAY', 'SATURDAY'))
  and (nvl (& exclude_sundays, 'Y') = ' or replace (to_char (days_between.days, 'DAY'),' ') not in ('SUNDAY', 'SUNDAY'))
  
  For the parameter 'date_from' enter 'to_date('2009-01-01','yyyy-mm-dd')' as a break for the 'date_to' 'to_date('2009-01-07','yyyy-mm-dd')' as a value parameter value. For the other 2 parameters, use 'Y' to exclude this day or "N" to keep this day here in the result set.
  
  So I said earlier, this query runs very well on a 8i database but not on a 10G a where I got the error "ORA01436 - connect with loop in user data.
  
  I have search the Internet but I don't know why it runs on a 8i and not on a 10G... Can someone help me please?

  Hello

  SELECT  ROWNUM  AS n
  FROM    dual
  CONNECT BY  LEVEL <= x;
  

  is a quick and easy way to generate a table of meters containing all integers from 1 to x. You are the query, it has been changed, not for a list of consecutive integers, but a list of consecutive dates.

  This technique only works in Oracle 9 (and more). You did a mistake when you said it works in Oracle 8 but not in Oracle 10? It is the opposite, when I try.

  Here is another way to generate a table of counters:

  SELECT  ROWNUM  AS n
  FROM    all_objects
  WHERE   ROWNUM  <= x;
  

  This method works in any version of Oracle, but it is slower than the method CONNECT BY and does not work for the great values on x. (this is probably good for x<= 5000,="" depending="" on="" your="">

  If you can do this:

  select days_between.days
  from     (
       SELECT     &date_from + ROWNUM - 1          as days
       FROM     all_objects
       WHERE     ROWNUM     <= (1 + NVL (&date_to, &date_from)) - &date_from
       ) days_between
  where     (     nvl(&exclude_saturdays,'Y') = 'N'
       or     replace(to_char(days_between.days,'DAY'),' ') not in ('SAMEDI','SATURDAY')
       )
  and     (     nvl(&exclude_sundays,'Y') = 'N'
       or     replace(to_char(days_between.days,'DAY'),' ') not in ('DIMANCHE','SUNDAY')
       )
  ;
  

  in any version of Oracle.

• Oracle: Connect loop in the user data

  I understand when a loop can occur in Oracle. In principle that it is said if a recording is both parent to another node and at the same time he was a child to him, then it may go into a loop.

  But I can't get why my this particular query is running in a loop.

  SELECT Empno, Ename, Job FROM Emp START WITH Empno = 7839 CONNECT BY PRIOR Job='PRESIDENT'

  Can someone please explain to me how these data can result in a loop. I did a CONNECT_BY_ISCYCLE check and found that the closure of the case is KING (Chairman). But I still don't understand how can be possible, that the KING is the President and I do not see anything in which it becomes child and parent to any record in the table.

  Please explain to me, why is it a mistake and where is the loop?

  Thanks in advance.

  Maybe if I pull on the hierarchy of your query, you will see what he is doing...

  PRESIDENT OF KING 7839<-- start="">

  PRESIDENT OF KING 7839<-- prior="" job='PRESIDENT'>

  PRESIDENT OF KING 7839<-- prior="" job='PRESIDENT'>

  .. etc.

  .. etc.

  ANALYST SCOTT 7788<-- prior="" job='PRESIDENT'>

  7902 FORD ANALYST<-- prior="" job='PRESIDENT'>

  7369 SMITH CLERK<-- prior="" job='PRESIDENT'>

  7934 MILLER CLERK<-- prior="" job='PRESIDENT'>

  7900 JAMES CLERK<-- prior="" job='PRESIDENT'>

  CLERK OF 7876 ADAMS<-- prior="" job='PRESIDENT'>

  7566 JONES MANAGER<-- prior="" job='PRESIDENT'>

  MANAGER CLARK 7782<-- prior="" job='PRESIDENT'>

  BLAKE MANAGER 7698<-- prior="" job='PRESIDENT'>

  7499 ALLEN SALESMAN<-- prior="" job='PRESIDENT'>

  7521 WARD SALESMAN<-- prior="" job='PRESIDENT'>

  7654 MARTIN SALESMAN<-- prior="" job='PRESIDENT'>

  7844 TURNER SELLER<-- prior="" job='PRESIDENT'>

  ANALYST SCOTT 7788<-- prior="" job='PRESIDENT'>

  7902 FORD ANALYST<-- prior="" job='PRESIDENT'>

  7369 SMITH CLERK<-- prior="" job='PRESIDENT'>

  7934 MILLER CLERK<-- prior="" job='PRESIDENT'>

  7900 JAMES CLERK<-- prior="" job='PRESIDENT'>

  CLERK OF 7876 ADAMS<-- prior="" job='PRESIDENT'>

  7566 JONES MANAGER<-- prior="" job='PRESIDENT'>

  MANAGER CLARK 7782<-- prior="" job='PRESIDENT'>

  BLAKE MANAGER 7698<-- prior="" job='PRESIDENT'>

  7499 ALLEN SALESMAN<-- prior="" job='PRESIDENT'>

  7521 WARD SALESMAN<-- prior="" job='PRESIDENT'>

  7654 MARTIN SALESMAN<-- prior="" job='PRESIDENT'>

  7844 TURNER SELLER<-- prior="" job='PRESIDENT'>

  Thus, in the first level of the hierarchy is your record START you WITH.

  When all folders are examined, the test of the PREREQUISITE WORK examines the top level folder, determines that he was the PRESIDENT and therefore each record matches this condition.

  Then, each of these folders are evaluated to determine the child records.  At this second level, only KING's post of PRESIDENT, he is the one who would have no record of the child and this WORK PRECONDITION = PRESIDENT will be valid for all records under the 2 KING level.

  This model keeps occurring under each folder KING indefinitely.

• Unable to connect Adobe cloud after update the expiration date of credit card

  Unable to connect Adobe cloud after update the expiration date of credit card.

  The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.

  The best option will be to contact Adobe support for this.

  Concerning

  Stéphane

• SE error message: user account Service failed to connect. Windows could not load user data while trying to connect to windows

  Original title: I can't access my user account

  I went to to connect my user on my laptop and a message popped up saying the service user account Service failed to connect.

  Windows could not load user data.

  Someone please help!

  Hi tozza92,

  1. you remember to make changes to the computer before this problem?

  2. are you able to connect by using a different account?

  You can consult the following Microsoft KB article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Connection problem: unable to load the user profile.

  Hello dear community HP,.

  We cannot open a session more although we think that we use the correct password.

  The error we receive is as follows:

  "The user profile Service has no logon. User profile cannot be loaded. »

  Product name (model No.): HP G5250BE - 5 CI3/550 M

  HP G5000 series

  We use Windows 7 Home Premium

  Thank you very much for your help.

  Best regards

  Ludgard

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• How to transmit frames CAN cyclically inside a loop obey the emission data informed BCD?

  Hi all!

  I don't know if I don't completely understand the behavior of the situation below. I use LabVIEW 2014 and PXI-8513 card under Windows.

  NOR-XNET help reading I understood:

  Cyclical data : the data frame transmitted cyclically (periodical). The period is defined in the "transmission data" field in the properties BOX of the framework in the DBC file.

  But how the transmission time can obey informed transmission data in DBC file if I call the XNET write VI in a loop with a waiting inside? I don't know if I fully understand how it works in a while loop.

  I watch the program below, how writing would behave?

  

  While the loop contains a "wait until the next multiple ms" 100 and the signal selected database (dbc) has a transmission time of 0.02 s (20ms), how many times would the framework passed in the first loop?

  If your answer is "Although the time of transmitting the frame is 0.02 s in this case writing is written only once", I have another question: How can I keep a loop writing frames obeying the time of transmission of the image of the CBD? Consider that I have signals selected different frameworks at different times to transmit.

  Thanks in advance!

  When you use the XNET write Point with Single mode, it updates the value that will be transmitted according to the schedule specified in the XNET (DBC file) database. If you call multiple entries before the frame was transmitted, only the last value written shuts down during the NPC.

  If you look in the help file XNET under the API OR-XNET for LabVIEW-> Sessions-> Modes of Session, you will find information, including an example of how it works.

  In your example - if you have a timing loop of 100ms, but your message cyclic time is 1s, then will send you only the last value of 'editorial' more message cycle time. If your timing loop is 100ms, but your message time is 10ms, so you pass the value even 10 times (about... windows calendar and all that).

  In essence, you CAN transmitting frame continues to run in the background according to the time where you specified in the DBC file, but you can then update the values which are transmitted asynchronously using the single-point VI write.

  If you want to check the values passed are updated every time - you must use the stream or queue mode and your frames to the output of the buffer. That, or you must use a RT target that can update the data in a deterministic way.

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">