Connect iPaQ h4350 of computer at home with wireless modem

Similar Questions

• Settings need to connect a second desktop computer using a NetGear wireless adapter.

  Original title: wireless settings

  I need the settings to connect a second desktop computer using a NetGear wireless adapter.

  The Belkin router work a lot using my Tablet and streaming movies but I can't understand

  the settings on the second PC.

  Any help will be appreciated.

  Thank you.

  "Settings", you need are the SSID (network name) and the encryption key (password).

  Unless you have configured the router to 'hide' the SSID (generally a bad idea), you will see in the list of available wireless networks.  Then, the only thing you need is the encryption key.

  If you do not write your encryption key, you can find it by logging into your router configuration utility.

  If you have a computer running Windows can now connect to the router, open a command prompt window (start > run > cmd > OK) and type "ipconfig" (without the quotes) and press ENTER.  Take note of the 'Default gateway' address.  It is the IP address of the router.

  The default IP for Belkin routers is 192.168.2.1.

  On a computer that is already connected to the router, open a browser (Internet Explorer or Firefox) and enter the IP address of the router (the gateway by default, you noted above or 192.168.2.1).  If you do not have a computer that is connected to the wireless router, you will need to temporarily connect a computer to the router by an Ethernet cable.

  Connect to the router configuration utility.  If prompted for a password and you don't remember, you need to reset the router to its factory default.  Return ticket for additional instructions.

  Once logged in, click on "Security" under "wireless" in the menu.  At this point, you should see a page that shows your password.  Write it down and exit the router configuration utility without making any changes.

  For more help, post back with the model of your Belkin router and also mention if you have any Windows computer that can connect to the router (and if yes, what version of Windows they use).

• How to fix my computer at home with only windows phone

  Just how internet on my windows phone. Have a computer at home, but no internet not connected to it. My screen on my computer at home is having a problem. This I just put my USB cable on the front of the computer at home to make it work?

  You can't fix your computer by using a Windows Phone, unless you receive instructions by a person's phone.

  What is the problem with your screen?

  Be specific with the problem your experience.

  How long it has past.

  Have you installed a new hardware or software?

  Have you checked the cable connection from the monitor to your graphics port?

• How to connect HP to LP computer smart tv with cable

  I have a WiFi connection, but it seems slow. want to connect to the LG smart tv using a cable. Need to know what kind of cable and the connection on the smart tv port.

  Thank you for the additional information.

  If it comes to your TV , you will need to use an adapter to connect it to your computer.  The motherboard has one VGA and DVI - D connector.  The DVI - d digital only.  So you need a HDMI DVI - D for the computer and connect the other end of the HDMI cable to your TV.  It has a HDMI (In) connector on the side.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Unable to connect to the Internet when the computer is away from wireless modem

  Initial problem of title: connection
  Hi I have a dell xps 14z windows 7 that my problem is that whenever I want to connect to the onternet I have 2 b right next to my wireless modem. All other computers in the House can go anywhere in the House and sign, but I can't do it's as if every time I lose the signal of what can do to improve my reception on my computer

  It has always been like this, or is the problem started recently?

  Is it a new PC?

  - - - - - - - - - -

  If it was always like that on a new Dell PC then: -.

  I had this problem with my new Dell 1545 but it was some time ago.  The utility Dell WiFi was, it turned out, interfere with the management of the windows of the WiFi card.  There was also a problem of compatibility with versions of driver and I had to keep the driver to the version Windows offered two years ago.  You can read about it at low signal wireless Dell Inspiron 1564 laptop 1397 WLAN Mini card , but don't forget that it was some time ago and that he was with another model of Dell.

  You can also try asking Dell support, but I never had any help from them at all, despite the request.

  Good luck

• Create microsoft for iPad with wireless modem network

  I connect to the internet via a USB wireless modem. I am trying to create a network on my laptop I can connect my iPad so that I can access the internet with a modem viathis. I managed to create a network, but when I try to connect my iPad it ask the password, and then said: he can't connect after that I entered it. He does not say why it cannot connect. Any help much appreciated

  I connect to the internet via a USB wireless modem. I am trying to create a network on my laptop I can connect my iPad so that I can access the internet with a modem viathis. I managed to create a network, but when I try to connect my iPad it ask the password, and then said: he can't connect after that I entered it. He does not say why it cannot connect. Any help much appreciated

  Do you hear a modem high speed wireless 3G / 4G Verizon or AT & T or similar provider?

  If so, depending on your broadband wireless service provider, you may be able to buy a wireless router that supports your device to USB wireless broadband. The advantage of this is that you need not your laptop on just to be able to access the internet from your iPad. Your laptop and iPad could access the internet independently of each other.

  http://3gstore.com/index.php?Main_Page=page&ID=87

  If it is a modem type wide broadband dsl/cable USB, then you can contact your ISP and get them to exchange for a modem with an Ethernet port. If they are for you, I would recommend a router cable/dsl wireless broadband connected to the modem via ethernet and wireless in your laptop and iPad. For example, here's my network home.

  http://theillustratednetwork.MVPs.org/LAN/CurrentHomeLAN.PNG

  Otherwise you could build a network hosted with your Windows 7 laptop (connected to the internet via USB modem) and iPad. Here are a couple of free GUI frontends to the netsh commands that implement this. These turn a computer into a virtual router Windows 7 wireless. The downside is that the Windows 7 machine must be turned on all the time you want to access the internet from the iPad.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  help networking Apple iPad...

  http://www.Apple.com/support/iPad/WiFi/

  http://discussions.Apple.com/category.jspa?categoryID=267

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• How to connect EA6500 to the phone line, but with no modem

  Hi all

  I just bought an ea6500 to replace my old router billion and up to now all I had to do is plug my phone line directly into the port ' phone line in "on the back of the router billion.

  But according to me, there is no "phone line in" port on the ea6500, I don't use a modem and have used the router billion in itself for the past 6 years, is it possible to connect my telephone line directly on the ea6500 somehow, ideas appreciated?

  My research indicates so far you can do via a ' Ethernet / phone line adapter "because they are incompatible, in any case.

  Installation guide appears if wait to a Modem is being used, but in my case it was not and I think that a router must perform the basic functions of a modem anyway?

  What concerns me is that if I really need to buy a modem, then this is potentially 'Butterfly' the features of the ea6500 which is the reason why I bought it in the first place?

  If I need to buy a modem to get my work ea6500 so what specifications should I look for?

  confused the new customer... Thank you

  I just checked the online billion router and discovered that it is actually an ADSL router, so it has an ADSL port at the back that the EA6500 do not have. I suggest that you ask your Internet provider if they provide or provide you with a DSL modem, you can install the EA6500 router properly. In addition, the EA6500 is a simple band and dual gigabit router that works behind a modem cable or DSL internet connection.

  Get to know the router Linksys Smart Wi - Fi, EA6500

  Linksys router Smart Wi - Fi, EA6500 frequently asked questions

• WNDR3400V2 (RN600) router - wireless repeating with Wireless Modem Arris

  I need help. I have an Arris wifi Modem (TG862) - recently installed when moving into a new House and the signature to the top for cable internet. I have a problem with weak wifi signal in the rear rooms - with signal drop. I have the spare WNDR3400V2 - so, how can I use it to boost my signal, preferably wireless? I have trouble to get the right settings when you configure as Repeater with different guides does not not exactly to my hardware. I don't have too much knowledge on this and how do it, but any help will be appreciated. The PC in the bedroom becomes signal well enough, I'm fighting to get compatible with phones wifi...

  In order to strengthen the signal on the desired location, run a long ethernet cable from the modem to the NETGEAR router.

  Still, there is no way for these 2 devices to be connected wireless to the other.

• I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to open a session.

  I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to log on... I tried options menu that is to say; go to the last known working etc etc... but not good. Problem came when the wife has removed some material... not been able to get a blue screen connect etc. Since HELP!

  original title: help!

  If you have no Windows CD, you can not do a repair installation.

  If you have no Windows CD, the message from the moderator of the Forum Nicholas_W will not help you either.

  If the disk verification fails, there is no sense to try a repair installation because the file system was obviously some problems that must be fixed first (at least that is what I think).

  Wouldn't you want some ideas that actually work?

  The error:

  STOP: 0 X 00000024 0 X 00190203 0X82F42108, 0XC0000102, 0X00000000

  indicates a problem with your NTFS file system.  You can usually solve this by running chkdsk/r from the XP Recovery Console.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• How can IP address - I connect to my computer at home?

  Original title: ip address

  Hello!!

  I have a few questions.

  I have read in many forums that computers running Windows have two ip addresses: internal and external.

  first of all, I don't know the difference between them.

  Then, suppose I want to connect my computer remotely. What ip address to use? It is ip has see when I execute the command ipconfig at the prompt of commands, or ip, I find when visiting ipaddress.com? I ask this question because I saw that look for it in the ipaddress.com of ip address changes each time I connect to my router.

  the ip address I can find in the command line changes (ipconfig command). also, many router gives the same ip address to the computer connected to its network. I say this because I have a friend who uses the router as mine, and we sometimes have the same (192.168.xxx.xxx) ip address.

  How can I connect to my computer at home whenever I need if the ip address of the Exchange computer? Otherwise, I have to check the ip address before you leave the House.

  How can I connect to my computer at home by its name if the two computers can have the same name?

  I noticed that there are too many question, but whatever the answer, I'll be satisfied.

  YO

  1-devices on your local network have internal IP addresses.  Your router/modem translates them your external IP who sees the rest of the world.  Your internal IP address is usually something like 192.168.0.1 etc..

  2. it depends on how you want to connect remotely but you always use the external IP address.  whatismyip.com will tell you what it is.

  Your ISP assigns the external IP and the most dynamically assign (which means that they can change)

  There is a really easy (and free) way to connect to your computer remotely, eliminating the need for you to deal with the IPS called Team viewer.  It is here http://www.teamviewer.com/en/index.aspx

  You simply install viewer of the team on both computers.

• I just buy an Ipad and trying to put up with my computer at home. Can anyone help?

  setting up wireless on home computer

  Hi, just bought an Ipad and trying to put up with my computer at home.  Can anyone help?

  I tried, but nam said that I need a wireless card?

  Thank you Debbie

  You must use a wireless card, if you want to use it on a computer. What exactly do you want to contact? Your computer, or a wireless modem / router? If a router, you must connect in it and then configure that

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading \3\DLBUtime.dll

  Error loading \3\DLBUtime.dll

  I have a Dell computer that came with Windows XP Home edition.  When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module

  I just click 'ok' and he goes, but, as for what it stop popping up everytime I start my computer.

  Can someone help me with this?

  Aprilm,

  You are LuLu5119, who posted a question last August?

  If this isn't the case, you should have started your own thread.  If so (and even if not), you should have responded to questions about Dell printers.

  Assuming that you complain of a "Error loading \3\DLBUtime.dll" message that appears when you start your computer, you should know that the DLBUtime.dll file probably has something to do with the software from Dell which has been partially deleted, but could also be indicative of malware as well as partially withdrawn.

  In both cases, the best way for start you to prevent the message at windows is to download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Install the Autoruns and let it complete the scan of your computer.  Then click on the "Connection" tab and uncheck the following entry:

  Look for an entry that has 'DLBUCATS' in the first column.  If you do not see that, look for "rundll32 \3\dlbutime.dll" in the last column ("path of the Image).

  Uncheck that entry, close Autoruns and restart your computer.  You should get is no longer the message.

  If for any reason, you find later that you need dlbutime.dll running, run Autoruns and check the box. If you decide that you need never again, run Autoruns, right-click on the entry and select Delete.

  As General precautionary measure, in case your entry dlbutime.dll was related to malicious software, rather than the Dell printing software, download the following free scanners:

  MalwareBytes Anti-Malware: http://malwarebytes.org/
  SUPERAntiSpyware Portable: http://superantispyware.com/portablescanner.html

  For MalwareBytes Anti-Malware, download, install, update and run.
  For Portable SAS, follow the instructions on the Web page (note that the instructions assume that you use a different computer to download; if you're not, just make a note of the name of the file).

• Error 'this computer cannot connect to a homegroup. " How can I connect my 2 parts forming a home network?

  I'm trying to connect my pc with my pc upstairs downstairs (both HP pcs. 1pc is Vista, the other is 8.1). Now, I guess I'm on the right track to connect both PC and trying to establish them as a group residential when I get to the page of the homegroup, it reads 'this computer cannot connect to a homegroup' Finally I get 'service Homegroup provider is not running.

  How can I connect my 2 parts forming a home network?

  Thank you DVSMSC I missed it - you have reason. Homegroup is introduced in Windows 7 and works in 8 / 8.1 / 10 also, but not back to Vista.

• Unable to connect to the desktop computer running Windows 7 laptop running Windows 7, both in my home network, using remote desktop

  My desktop (host) is running Win7 Pro and my (client) laptop is running Win 7 Home Premium. For the office, I went to the control panel and allows remote connections. When I try to connect with the laptop in my same home network, I get an error message: Remote Desktop cannot connect to the remote computer you for one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Now, the computer is on and I can see what he listed as one of my computers on network. In fact, I accessed the command of remote desktop by right-clicking on the desktop in the list of networks and by selecting Remote Desktop in the menu dropdown.

  Obviously, I am missing something or something wrong. Please help me to understand.

  What do you call the remote [DRC] host desktop desktop machine, IE. local LAN IP static, the laptop?

  See this help as possible...

  http://theillustratednetwork.MVPs.org/RemoteDesktopTroubleshootingChecklist.html