connect the form builder to oracle 10g express?

Similar Questions

• Dynamics, where the form of Clause - Oracle 10g

  Hi all

  The scenario is we provide an interface (via form 10g) to execute different queries. These requests have set the columns and tables (for example, we have same SELECT and FROM clauses for each request). However, WHERE clause is unique for each request. So, I'm writing a dynamic cursor, but DYNAMIC CURSORS are not clear for me. I post my code for taking advice from experts in the forum.

  
  

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Load_Rows EXEC_SQL. CursType;

  New_Query varchar2 (5000) = ' SELECT IRR_TAMPERED_OK | «, » || IRR_DATE_DISPATCHED | «, » || IRR_DISPATCHED_NO | «, » || IRR_REG_ID | «, » || IRR_CONS_NO | «, » || CON_NAM | «, » || CON_ADR | «, » || IRR_SR | «, » ||

  EMC_EVC_NO | «, » || IRR_TNO | «, » || IRR_MTR_TYPE | «, » || IRR_MTR_DIC | «, » || MTR_RED_COR | «, » || MTR_RED_UNCOR | «, » || MTR_RED | «, » || IRR_FP_SIGN | «, » || IRR_FP_OPEN | «, » || IRR_FP_SIGN_CHK | «, » || IRR_FP_CHK | «, » || IRR_20PSIG_SIGN | «, » || IRR_20_PSIG_VALUE | «, » || IRR_40_PSIG_SIGN | «, » || IRR_40_PSIG_VALUE | «, » || IRR_60_PSIG_SIGN | «, » || IRR_60_PSIG_VALUE | «, » || IRR_80_PSIG_SIGN | «, » || IRR_80_PSIG_VALUE | «, » || DTE_REM | «, » || DTE_REC | «, » || IRR_CALL_REMARKS | «, » || IRR_SEAL_COND | «, » || IRR_G_OBSER | «, » || Data IRR_REMARKS

  Of

  inproving_result_remarks, MTR_RET_CRD' | : WHERE_CLAUSE;

  Start

  Load_Rows: = Exec_SQL. Open_cursor;

  EXEC_SQL. PARSE (Load_Rows, New_Query);

  EXEC_SQL. DEFINE_COLUMN (Load_Rows, 1, v_colchar1, 30);

  EXEC_SQL. DEFINE_COLUMN (Load_Rows, 2, v_colchar2, 15);

  EXEC_SQL. DEFINE_COLUMN (Load_Rows, 3, v_colchar3, 30);

  v_exec: = EXEC_SQL. Execute (Load_Rows);

  WHILE EXEC_SQL. FETCH_ROWS (Load_Rows) > 0 LOOP

  EXEC_SQL. COLUMN_VALUE(Load_Rows,1,v_colchar1);

  EXEC_SQL. COLUMN_VALUE(Load_Rows,2,v_colchar2);

  EXEC_SQL. COLUMN_VALUE(Load_Rows,3,v_colchar3);

  END LOOP;

  EXEC_SQL. CLOSE_CURSOR (Load_Rows);

  end;

  
  

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  I have to integrate above slider DYNAMICS written in the code below that was written using a simple slider:

  
  

  BEGIN

  -Path to the file

  user_nam: = WebUtil_ClientInfo.Get_User_Name ();

  path_part: = to_char (sysdate, 'DD-MM-YYYY (MI-HH-SS)');

  lv_File_Name: ='C:\Users\'|| user_nam | "\CMS_MIR_'|| path_part |'. CSV';

  -Open the file in write mode

  lv_File: = client_text_io. FOpen (lv_File_Name, 'W');

  -Write the header columns

  client_text_io. Put_Line(lv_File,'IRR_TAMPERED_OK, IRR_DATE_DISPATCHED,IRR_DISPATCHED_NO,IRR_REG_ID,IRR_CONS_NO,CON_NAM,CON_ADR,IRR_SR,EMC_EVC_NO,IRR_TNO,IRR_MTR_TYPE,IRR_MTR_DIC,MTR_RED_COR,MTR_RED_UNCOR,MTR_RED,IRR_FP_SIGN,IRR_FP_OPEN,IRR_FP_SIGN_CHK,IRR_FP_CHK,IRR_20PSIG_SIGN,IRR_20_PSIG_VALUE IRR_40_PSIG_SIGN (, IRR_40_PSIG_VALUE, IRR_60_PSIG_SIGN, IRR_60_PSIG_VALUE, IRR_80_PSIG_SIGN, IRR_80_PSIG_VALUE, DTE_REM, DTE_REC, IRR_CALL_REMARKS, IRR_SEAL_COND, IRR_G_OBSER, IRR_REMARKS');

  -- Write lines in the file

  Row_Count: = 0;

  FOR i IN Load_Rows LOOP

  -COUNT: = Load_Rows % ROWCOUNT; -counter

  Row_Count: = Row_Count + 1;

  client_text_io. Put_line (lv_File, i.DATA);

  IF Row_Count = 5000 THEN

  Synchronize;

  Row_Count: = 0;

  END IF;

  END LOOP;

  -Classify

  client_text_io. FClose (lv_File);

  Message ("meter inspection report was generated: C:\Users\'||") user_nam | "\CMS_MIR_'|| path_part);

  Message ("meter inspection report was generated: C:\Users\'||") user_nam | "\CMS_MIR_'|| path_part);

  END;

  Just so that I understand what you're trying, you are not display the results in your form, you simply run a dynamic query that you export the results to a file.  Is this correct?

  So, what happens when you run your code?  Are you an error (If Yes, what is the full error)?

  One suggestion that I have after reviewing your code example is that you don't have a space after your FROM clause before you concatenate your WHERE Clause in your sql string variable.

  Your example Code:

  ...
  FROM
  inproving_result_remarks,MTR_RET_CRD'||:WHERE_CLAUSE;
  

  There should be a space after MTR_RET_CRD.  For example:

  ...
  FROM
  inproving_result_remarks,MTR_RET_CRD '||:WHERE_CLAUSE;
  

  Without the space your SQL will not scan properly.

  Another suggestion that I have is that you move your code from collection to a stored procedure (procedure or function) in your database of data and your stored procedure returns a collection.  This will eliminate the constant travel to the database for each line of the recording because your stored procedure will return the record complete game.  In addition, your stored procedure allows you to use dynamic SQL Native (Execute Immediate) will allow instead of using dynamic SQL from forms (EXEC_SQL) package. Native dynamic SQL is much more efficient and a lot less code.  In order to use native dynamic SQL, you must have on the Oracle Database 9i or higher.

  Craig...

• Oracle 10G EXPRESS EDITION for windows7

  Hi all
  can you guys please give me the link to download oracle 10g express edition for windows7
  I had already downloaded one for windows7, but when I go to install, I can't able to execute it, and that the file downloaded, said the PUBLISHER OF THIS PROGRAM could not BE VERIFIED.
  
  SO CAN U PLZ GIVE ME LINK AS SOON AS POSSIBLE.
  THANKS IN ADVACE.

  Hello

  Have you checked the installation manual?

  Windows 7 is not supported and you should go with a certified operating system.

  Thank you
  Hussein

• How to operate the same instance of oracle 10g on another computer

  Hello all, sorry for my ignorance. I downloaded oracle 10g express edition on 2 computers but when I login using sql developer I get two different instances of oracle databases. This file should I change on one of the computers so that when I connect through sql developer im always on the same database. Is there is tns.ora of files that I have to do the same thing on my other machine? Any help would be appreciated.

  user633029 wrote:
  I downloaded oracle 10g express edition on 2 computers but when I login using sql developer I get two different instances of oracle databases. This file should I change on one of the computers so that when I connect through sql developer im always on the same database.

  Hello!

  I don't know I understand your condition?

  But, if so:

  You have 2 computers and the two you want to access a single Oracle database.

  If this fix then you should only on a single machine to install server XE and another machine THAT XE Client.

  After that, you have to copy the file tnsnames.ora to computer where XE server resides at according to the directory where client XE.

  HTH

• Cannot uninstall or reinstall oracle 10g express edition w/Server 2003

  Hello
  
  I need help from you all, I have installed oracle 10g express edition in
  Windows 2003 server in the drive d but I can't delete because the oracle not in
  Add Remove program so I download the windows install clean up to remove
  but after deletion, always in the program all I still can start and stop the
  database but cannot go to the homepage of database. The error message (installation
  cannot proceed as service OracleServiceXE is present on the system. Remove the
  service, restart the translated retry installation) can someone guide me to use
  command prompt to remove.
  My email address [email protected]
  
  Thank you

  GoTo D:\oraclexe\app\oracle\product\10.2.0\server\BIN
  and clik cleanup.bat. This should eliminate OracleXE service

  then re - install XE (or) delete oraclexe folder and oracle logs and try to install.

• How to find the site to download oracle 10g

  Hello
  
  I need to find the site to download oracle 10g. Please, help me.
  
  Respect of
  Natalia

  10g is no longer available for download - you need to open an SR with Support and they will provide a download link, assuming you paid for extended support.

  PL see the previous discussions on this topic

  year https://forums.Oracle.com/forums/Search.jspa?threadID=&q=10g+and+Download&objid=C18&DateRange=This & userID = & numResults = 15

  HTH
  Srini

• form was created by an older version of the form builder

  I developed my form using Forms 10 g (9.0.4.0.19 (Production)) and when he kept on the application server.
  
  After that, I used my forms to uprgrade forms migration assistant... .the 932 kb resulting file converted to a 500 k file...
  
  I then used the compiler forms
  
  where in I specified the name of the fmb file... has given the username, the pwd and the string for the database...
  
  and I see even a compiled fmx copy into folder...
  
  but when I try to run on I get it
  
  form was created by an older version of the form builder
  
  I want that my forms are converted 10.1.2.0.2 production so that i can host the application on the server
  
  Published by: Chase Suhail on February 8, 2011 23:37

  Hello

  Sources (.fmb) must be built on computer target to generate a binary compatible (.fmx).

  François

• Facing problem when opening the Form Builder 10 g

  Hi Experts,
  
  I am facing below error while opening one of the forms developed in the 10g form builder. My laptop's operating system is Windows 7.
  
  Oracle Forms Designer has stopped working
  
  Windows can check online for a solution to the problem.
  
  -> Check online for a solution and close the program
  -> close the program
  
  
  Please provide advice or solutions to resolve the above error.
  
  Thanks in advance

  Meher Irk says:
  Hi Experts,

  I am facing below error while opening one of the forms developed in the 10g form builder. My laptop's operating system is Windows 7.

  Oracle Forms Designer has stopped working

  Windows can check online for a solution to the problem.

  ---> Check online for a solution and close the program
  ---> close the program

  Try this...
  Open form builder.
  Connect to the database.
  Now, open the form.

  I hope this works...

• Oracel Database 11g Release 2 connection with Forms Builder 10 g

  I installed Oracle Database 11g to Microsoft 32-bit window, now I want to connect it with my builder 10g developersuit forms.
  Please tell me ho connect it.

  Ghulam Yassen wrote:
  Yes I put the file tnsname.ora in the constructor of the form but still not solved.
  again error shows
  AMT could not resolve the connect identifier specified.

  If your oracle database sid or service name is orcl

  your tnsnames.ora should look like this:

  ORCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ip_address_of_server )(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = orcl)
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )

  ----
  cmd > tnsping orcl #to test

  For more information: http://download.oracle.com/docs/cd/B28359_01/network.111/b28317/tnsnames.htm

  HTH
  Tidjani

• Impdp deliver oracle 10g express - ORA-39002, 39070 29283, 06512 29283

  Dear all,
  
  I have the following problem, try to import a dump:
  
  D:\COSMOS_BATCH_RUNNER\Automation_oracle\Scripts\IMPORT DMP > impdp ses17/ses17 di
  rectory = DMPDIR dumpfile = ses17.dmp
  
  Import: Release 10.2.0.1.0 - Production on Friday, November 26, 2010 09:45:10
  
  Copyright (c) 2003, 2005, Oracle. All rights reserved.
  
  ConnectΘ α: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  
  ORA-39002: invalid opΘration-> invalid operation
  ORA-39070: opening of the impossible logfile-> could not open the log file
  ORA-29283: invalid opΘration on the file-> invalid operation on file
  ORA-06512: Α 'SYS. UTL_FILE", line 475
  ORA-29283: invalid opΘration on the file
  
  I created a DMPDIR and issued read and write right to ses17 of the user before importing the dump.
  When I have a look at the security of the folder referenced by DMPDIR, I must also have read and write access to it. (in windows when I right click on the folder-> properties-> Security (reading and writing are crossed).)
  
  No idea how to import the dump file?
  
  Thanks in advance,
  Thomas

  Are what OS you on.

  On Windows server, it may be that the user cannot write to this directory because of the restrictions of the user.
  The error is generated because he wants to write a log file to the location of the DIRECTORY.

  Check also if UTL_FILE_DIR includes the directory entry (post its value here)

  Workaround solution:

  -Move the file to another directory and work from there

• Oracle 10g Express on Ubuntu problems [sqlplus ORA-01034, ORA-27101]

  Hello!
  
  Trying to correctly install and configure 10g Express version on Ubuntu Linux 8.04 Server without success. I'm a noob Linux and Oracle and tries to install the database under the Project.net service.
  
  I followed installation guide of Oracle Database Express Edition for linux I got from Oracle's Web site.
  
  I installed the deb package with gdebi.. .deb (and later reinstalled with dpkg - i .deb..) as described in the guide. Go 'by the book' I ran /etc/init.d/oracle-xe set up and confirmed the default values. I put the password for the SYS and SYSTEM account. The value DB autostart. I also ran the /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.shand added this line to the file .bashrc. Then, still in the following installation guide, I wanted to make available for remote clients DB and tried to connect to DB at the local level, using the sqlplus command line. Here, the problems begin:
  ----
  SQL * more: Release 10.2.0.1.0 - Production on MON 20 Oct 11:47:23 2008
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  Enter the user name: System
  Enter the password:
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux error: 2: no such file or directory
  ----
  
  I tried all combinations of upper/lower case, sys and system - unable to connect account. Was the normal user, root or oracle user - does not work.
  
  I searched this forum and google for the answer, but none works for me. There have been responses suggesting to change the environment variable ORACLE_SID, logon with the sysdba account, which gives the following:
  ---
  root@TestSrv:/# sqlplus/nolog
  
  SQL * more: Release 10.2.0.1.0 - Production on MON 20 Oct 12:06:04 2008
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  SQL > connect system / [passwd] as sysdba
  ERROR:
  ORA-01031: insufficient privileges
  ---
  
  I really want to do this, so any help would be greatly appreciated. Please note that I am very green in Linux and a complete noob in Oracle.
  
  TNX!

  He has to work.
  But next time, do not forget the password that you type ;-)

• schedule the automatic start of oracle 10g R2 on RHEL5

  Hi master,
  
  I use oracle 10g R2 on RHEL 5. I want to program the automatic start of the oracle on linux start database.
  
  for that I have referefed the docs and plan its in the file/etc/rc3.d. but it does not work.
  
  It is written in the docs that this charger friub fron of process this file and start their beds according to their number.
  
  the file is as follows...
  
  #! / bin/sh
  #chkconfig: 346 99 10
  Description #: Oracle automatic start-stop script.
  #
  # Change the value of ORACLE_HOME to specify the right Oracle home
  # To your installation directory.
  
  ORACLE_HOME=/U01/app/Oracle/product/10.2.0/Db_1
  #
  # Change the value of the ORACLE of the connection of the
  owner of oracle # on your site.
  #
  ORACLE = oracle
  
  PATH = ${PATH}: $ORACLE_HOME/bin
  HOST = "hostname".
  Platform = 'uname '.
  export ORACLE_HOME PATH
  #
  If [!] "$2" = "ORA_DB"]; then
  If ['$PLATFORM' = "HP - UX"]; then
  Remsh $HOST-l $ORACLE n ' $0 $ 1 ORA_DB.
  output
  on the other
  rsh $HOST-l $ORACLE $0 $ 1 ORA_DB
  output
  FI
  FI
  #
  case $1 in
  'Start')
  $ORACLE_HOME/bin/dbstart $ORACLE_HOME
  ;;
  'stop')
  $ORACLE_HOME/bin/dbshut $ORACLE_HOME
  ;;
  *)
  echo "use: $0 {start |}". stop}.
  output
  ;;
  ESAC
  #
  output
  
  What should I look for?
  
  my listening service is also not automatically get started. I have to manually...
  
  any suggestion?
  
  Thanks and greetings
  VD
  
  Published by: vikrant dixit on December 23, 2008 21:58

  VD,
  This link willl helpp
  http://www.Oracle-base.com/articles/Linux/AutomatingDatabaseStartupAndShutdownOnLinux.php
  HTH
  Aman...

• Where do you find the form 'POST' method in visual express 2010 that he will not accept the version of frontpage

  This is the method that worked well in frontpage, but does not work in Visual express 2010 and I can't locate the form fields in the menu drop-down
  

  
  action="_vti_bin/shtml.dll/reservations.htm" webbot-action = "- WEBBOT - SELF -" >
               

  Hi harbingerNZ,
  Here is the link to the MSDN support forum. There, they will be able to answer your question.
  http://msdn.Microsoft.com/en-us/aa497440.aspx#two
  hope this helps
  Eddie B.

• How can I connect the form to the database?

  How can I store the form data entered in the database in adobemuse? You please tell me any possibility of storage and provide authentication and make entries in adobemuse?

  Hello

  Please check the related threads

  How can I connect to SQL Server with the Muse?

  MySQL DB & Adobe Muse

• How to navigate to a new form on click of a button in the form builder

  Hi all
  I created a form using form builder and need to navigate to a new form by clicking a button (name: application form) to guess to fill in the details by the applicant. I need the main form must remain open when the new form is opened. This code will be used for this.
  
  Any idea will be highly appreciated.
  
  
  With respect,
  Neelam Krishna

  OPEN_FORM ('formname') matches the when_button_pressed trigger, but in the course of time his message giving "cannot read the form" when that special touch.

  Give something like that.

  Open_form('C:\Form_name.fmx');
  

  If his please correct/good mark thank you.

  Sarah