How to operate the same instance of oracle 10g on another computer

Similar Questions

• How to find the site to download oracle 10g

  Hello
  
  I need to find the site to download oracle 10g. Please, help me.
  
  Respect of
  Natalia

  10g is no longer available for download - you need to open an SR with Support and they will provide a download link, assuming you paid for extended support.

  PL see the previous discussions on this topic

  year https://forums.Oracle.com/forums/Search.jspa?threadID=&q=10g+and+Download&objid=C18&DateRange=This & userID = & numResults = 15

  HTH
  Srini

• How to operate the same license on two computers?

  Hello

  I searched around a bit to find answers to my questions so far without success.

  I used Adobe Lightroom 3 & 4 on my computer for years. Now, I bought a laptop as well. I am the only user of both computers. If I understand the end user license agreement, I am allowed to use the same license on two of my computers.

  Is it simple? Just install LightRoom 4 with the serial number of the purchase? LR4 was an upgrade to LR3. I must first install LR3, or just use the two serial numbers?

  I would also like to upgrade my computer Windows 7 to Windows 8. I have tried current upgrade process and told me he has failed, and I have to do an installation complete (fresh) of Windows 8 (after formatting the drive of the computer).

  I'll be able to do this? My favorite current LR4 running on two computers with Windows 8, even if 'result' is a new installation of Windows 8 on the stand-alone computer.

  I am also considering the purchase of Adobe Acrobat. I'll be able to run that as well on two computers?

  What happens if I replace the stand-alone version with a new computer a day - I'll be able to pass the license of the 'old '?

  I would appreciate a response to this post.

  Best regards

  Svein A. Martinsen

  I have been in contact with Support from Adobe, which has been very helpful. I have now installed LR4 (4.4) on my laptop. As I had upgraded to LR3 LR4, I needed two serial numbers. Of course, which was no problem because I had kept the emails. They are also available on my account on adobe.com.

  I didn't ask the person supported on deactivation, but if I understand correctly, I should somehow disable the LR4 license on the stand-alone version before installing Windows 8 on this computer. (LR4 and other applications of course will have to be installed after a fresh install of the OS).

  Kind regards

  Svein a. M.

• How to check the table reused in oracle 10g space?

  Hello..
  
  Of my system, I see table size keep growing event the deletion request is running. Because of this, I would like to check either the allowed oracle to reuse space table or not? If not then how can I enable it?
  
  
  Please help me...
  
  
  Thank you
  Balleur

  You can use dbms_space.space_usage to check for free space.

  Reuse of the space will depend on whether you use MSSM or SAMS, PCT_FREE, PCT_USED and the way in which new data is inserted?

  You can reduce or move the table and rebuild the index to reclaim space.

• How to manipulate the NCLOB values in oracle 10g?

  Hi Experts,
  I have a scenario where I have to show the output of the screen multi language. IM using plsql developer, my plsql block should show the report of multi language.
  Root table have multi language stirng stored in it with the NCLOB data type. In my block plsql, im in NCLOB variable(ex: var1) selection. When I insert as var1 in other tables of test with nclob column, it's showing the original text in multi language. But when I manipulate than with some other variables var1 (ex: var3: = var2 | var1), now if I insert additional tables var3 it inserts as var2? value. and even in the DBMS output as well.
  Please help me to get the original value of multi language. Or guide me to manipulate variables nclob.

  Have you tried DBMS_LOB. ADD?

• How to use multiple profiles within the same instance of Thunderbird

  A month ago, I got Thunderbird set up with three profiles,
  and all three could be used in a start only one of
  Thunderbird. That the PC is now gone. I've reconfigured the three
  profiles on a new PC, but can't do all three
  can be used in the same instance of Thunderbird. Can you help me?
  Both computers are / were only Windows7 64 bit.

  Thunderbird opens on the default if a profile
  or
  The Profile Manager is responsible to ask at startup it will allow you to choose which profile to open if it opens the last used profile...

  Thus, it shows a profile at a time within a single instance of Thunderbird.

  However, only one profile can have multiple e-mail accounts.
  for example: I run 4 e-mail accounts in a profile.

• R12: Copy a group of companies with configurations, metadata and data in the same instance of OA

  The idea was born to a very common condition between the companies IT. pre-sales and pro-ventes groups do various tasks, including the response of the RPF/RFI, PoC, building, Solution architecture, customer demo etc. Ususally they do not have the dedicated application instances, or rather they do not find a sufficient number of cases of applications dedicated to deep study of the road. Every other day a group cries out for an Apps instance and the same gets lift for senior management in short time. It gives a lot of pain to the infrastructure/DBA groups because they fail to meet people like them, due to the limited availability of free nodes, resources, networks and space etc.
  
  I have a Vision of the R12.1.3 (tell SID = VIS1213) installed on a Linux machine. The box is quite busy with his hearts limited, showing little free memory and the attached SAN has insufficient free space remaining. A group of Oracle Apps pre-sales consultants, says "Group 1", is the use of this.»
  
  Now the 3 other groups are asking for a R12.1.3 Vision instance separately for different reasons below. Each of them wants the instance again and do not share with others.
  
  Group 2 for deep study of the road against a critical response to RFP
  Group-3 for the development of a point of contact for a customer demo
  Group 4 for the manufacture of PUK media on some business processes
  
  In this scenario, I should install 3 distinct Vision of R12.1.3 (using CDs or downloaded zip) or clone VIS1213 in 3 different places with different SIDS, possibly on one or more separated nodes (as above Linux node has insufficient free resources). In this case, the need for available server resources and disk space multiplied by 3, so that DBA maintenance for these 3 new instances is added.
  
  Hope that I have clear air up to this point.
  
  Then I was thinking if we have "virtual instances" within an existing instance of Apps, by copying from a vertain org level. First I thought I'd take THE level, but it will not work if an instance of group to work with HRMS claims. We must therefore take business group level. After that we will create the appropriate role and responsibility, user profile options so that the new user can see and work on the new BG and data area down only. It will be like a separate instance to use.
  Benefits of my desired task will be
  
  -no separate server resource, the required network
  -no additional DBA not involved maintenance
  -no separate required backup plan
  
  So here it is to create 3 new "virtual instances" right within the same instance of VIS1213. New groups will have same URL, same existing TNS details but 3 credentials different existing access. Each of them would be limited in a way so that they can not see each and other data and can not hurt each and other changes.
  
  This can be achieved if we can copy an existing group of its activities with org structures, metadata and data, within the same instance. Oralce planning cannot be copied within the same instance configurations.
  
  What I've done so far was I manually created a new BG, attached an existing sobbing (CoA, Agenda / currency), created a new, copied and modified accounting structure flexfields before fixing, created the new ORGANIZATIONAL unit, and then a new InvOrg of master and a new InvOrg clild, defined the profile MO some GL and HR profiles. Then I extracted finished master and data assignment article category Masters against a master/child existing InvOrg, updated the data for newly created InvOrgs, inserted into tables insterface and ran seeded import conc program element. Except for a few, all data have been loaded into base against new InvOrgs tables.
  
  Then I tried with master provider (with sites and contacts). A few AP configurations are required, and then data provider (+ contact + site) have been loaded against OR newly created (under new BG) base tables.
  
  I do not proceed after that. I'm currently looking for ideas from the experts on how to go further.
  
  Planning is able to create this kind of 'virtual instance' within the same instance of OSTEOARTHRITIS?
  
  PL nowadays return.
  
  Thank you and best regards,
  Castelbajac Dhara
  E-mail: [email protected]

  PL don't post duplicate topics - R12: copy a group of companies with org, configurations, metadata & data structures

• Remove the same instance of two separate tables online

  Hi all

  I have two tables that each repeatable lines. Both tables must display almost the same information in each case of the line (I managed to code to link the values in specific cases of the lines). However, I added a button in the repeatable row, which allows the user to remove from the current instance of the line, so will they look back and realize that they do not need a line, they can take directly from the table. However, I can't seem to get the deletion affects the same instance of row of the second table. Is it possible to do this? I'm not terribly familiar with the instance Manager.

  Any help would be greatly appreciated. I just can't understand how to identify a specific instance of the repeatable row in table 2.

  Hello

  Removing instances in the event of an object that is inside the instance, you must ensure that you remove this particular instance at the end of the event.

  For example:

  If you delete the instance that the button is on the inside before finishing the entire event, the program will not recognize what event is to finish because you have removed it from the object that is triggered...

  You try here at the end of the code that no longer exists...

  I suggest that you still need to delete the instance (this) object at the end of any event to make sure to complete all your actions before deleting the object.

  I hope this helps!

• To 11g BI Publisher reports files shared in the same instance.

  Hello
  
  I have to move reports BI editors of MY folders to the shared folders in the same instance of BI Publisher.
  
  I just wanted to know does move the data model associated with the report so?
  
  As of now, I just moved the BIP reports and they are working well, but didn't know about this part of the data model.
  Can someone throw light on what best practices related to mobile reports in BI Publisher.
  
  
  Thank you
  Ashish

  Ashish Gupta says:
  Should I move the data model in the reports only, folder under shared folders?
  I just wanted to know the best practices as to how the model data and reports are stored in shared folders as in separate folders or all in the same folder.

  Yes, the best practice is to create a folder called BEEP Reports (shared folder)-> in virtue of which you can create 2 folders in the data model and data model
  >

  Also how to make sure that these reports under shared folders are oriented for the data model in shared folders and not to the model of my records?

  Thank you
  Ashish

  To ensure that the data/report model points to model data in the shared folder go to the corresponding report and the right pane under the report you see options like history open hourly labor jobs more editing

  Select edit-> opens a new window-> top you see a magnifying glass icon click on that now opens a new window select the shared folder for the corresponding report datamodel that's all.

  It may be useful

  Thank you
  RM

• Multiple MovieClips with the same instance name

  I'm a tutorial of defence tower and part of the code is set up so I can build towers in the video for "grass". I wanted to add patches more 'grass' and gave them all the same instance name so I can be able to place towers on them, but I have the problem that I can only place towers on the first point, I placed and bears the name of the instance of the "grass". I can't place towers on the other patches of grass.

  I removed the name of the instance of the first patch of grass and it let me build towers on the second task, but the second patch only.

  I followed this tutorial: http://www.goofballgames.com/2010/01/31/how-to-build-a-tower-defense-flash-game-part-2-pla five-tours /

  Here's the code for what I believe:

  onClipEvent (load)
  {
  Active = 0;
  }

  onClipEvent (enterFrame)
  {
  If (current == 1)
  {
  setProperty ("", _x, int ((_root._xmouse-10) / 20) * 20 + 20 ");
  setProperty ("", FLF, int ((_root._ymouse-10) / 20) * 20 + 20 ");
  
  hitTestOnGrassMovieClip = _root.grass.hitTest (_x, FLF, 1);
  
  If {(hitTestOnGrassMovieClip)
  gotoAndStop (1);
  _root.Ranger.gotoAndStop (1);
  }
  else {}
  gotoAndStop (2);
  _root.Ranger.gotoAndStop (2);
  }
  
  _root.Ranger._x = _x;
  _root.Ranger._y = FLF;
  _root.Ranger._width = donut _root ["tower_" + round] * 2;
  _root.Ranger._height = donut _root ["tower_" + round] * 2;
  }
  }

  
  (press)
  {
  hitTestOnGrassMovieClip = _root.grass.hitTest (_x, FLF, 1);
  hitTestOnDeSelectMovieClip = _root.deselect.hitTest (_x, FLF, 1);
  
  If (hitTestOnGrassMovieClip: hitTestOnDeSelectMovieClip) {}
  If {(hitTestOnGrassMovieClip)
  ++ _root.towerCount;
  _root ["tower_" + round] .duplicateMovieClip ("t" + _root.towerCount, 500 + _root.towerCount);
  a = _root ["t" + _root.towerCount];
  a ._x = _x;
  a ._y = FLF;
  a.active = 1;
  }
  
  Active = 0;
  setProperty ("", _x, 1000);
  _root.selectedTower = "";
  _root.Ranger._x = 1000;
  _root.Ranger._width = 10;
  _root.Ranger._height = 10;
  }
  }

  1. you cannot use the same instance name for different objects and expect more from a being targeted.  You must assign a unique name, or you can store references to them in an array and use the table to target.

  2. you send AS2 code messages in the forum of AS3.  You should repost in the AS2 forum.  http://forums.Adobe.com/community/Flash/flash_actionscript

• I made my largest site and how can keep the same size for all other sites?

  I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

  Separated from this thread.

  Hello

  Thanks for the reply, I clicked on the link and it shows windows...

  Here I can not open the widows of anywhere.

  How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

  MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

  He always goes to startup repair

  then he said not being able to correct automatically

  Under system recovery option what can I do?

  I don't want to go back to the point of origin of the memory (factory settings)

  Thank you

  Patrick

  Hello

  Have you tried using SafeMode w/command invites to perform a system restore?

  1. Press the power button to turn on the computer.
  2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
     
  3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
  4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
  5. Follow the on-screen instructions to perform a system restore.

  You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

  Using Microsoft System Restore (Windows Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

  You also have the option to create a backup of your files when you perform a recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

• I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer. If yes how can I do this?

  I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer.  If yes how can I do this?

  If Vista is preinstalled on your OLD computer, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  If it is a retail Vista license, read the information on the clean install and then reactivate it:

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• How to operate the F1 on the keyboard wireless 1027

  How to operate the F1 on the keyboard wireless 1027

  If key Fn is disabled in the BIOS, then you need to press Fn + F1 key, use the special function and just press the F1 key to use F1 and vice versa.

• How to map the same tag of the element with a different value in BI Publisher rtf model.

  Hello

  I have an xml file with the same name in the < tag > element and I do not know how to associate the same < tag > element to different string in the document rtf template attribute.

  For example: "' Eswitch <number > is repeated in this xml file, when I am mapping this element to the document rtf with a different string, I have same value 'D00002 ' . I should get values D00002 and DMR00002.

  < document >

  < TitleBlock >

  < number > D00002 < / number >

  < itemType > Document < / itemType >

  < lifecyclePhase > preliminary < / lifecyclePhase >

  < description > gtedgg < / description >

  < shippableItem > n < / shippableItem > < / cartridge > < / Document >

  < DMR >

  < TitleBlock >

  < number > DMR00002 < / number >

  < itemType > DMR < / itemType >

  < lifecyclePhase > preliminary < / lifecyclePhase >

  test nomenclature model bom1 < description > < / description >

  < POS > < value > Test < / value > < / POS >

  < shippableItem > n < / shippableItem > < / cartridge > < / DMR >

  < / AgileData >

  I followed steps below for map document model rtf with the same tag xml with a different value.

  1. install Office word 2013.

  2 BI Publisher for desktop software installed. It will add a BI Publisher plugin to the word document.

  3. with the help of desktop publisher BI, created a model of document rtf file.

  4 imported the document rtf template example xml file.

  The data is loaded successfully.

  5 tires model rtf field symbol to map the tags to xml to rtf document attributes element.

  7 saved the document in PDF format.

  
  

  Thank you
  

  Please mark it correct so that it is useful for others to find the solution to a similar request.