Connect the iMac G5, 2005 on TV via USB to use the TV as a monitor

Similar Questions

• Connect Sansa e250 to my audio devices via USB

  Hello

  Connect my sansa e250 to my Denon amp via USB only pieces of audio file of fixed drive will not play anything micro sd expansion port why? Using the sansa E250 01 software
  I would like to say good quality is achieved via USB and I can use the Denon remote

  When the sansa e250 USB connection port denon amp using rock box will not work
  Let's get only by jack stereo 1/4″ but will play music mm two disks

  Help

  Hello
   
  Yes, I should of said unit Sansa MSC mode, if I put in the MPT mode denon amp will not read the sansa e250 arrives with disconnection.
  I know that's not very common. I just bought a sansa fuse with more memory, but I was just wondering if there is any way to be able to have access to the micro SD and card.
  Thanks for the reply.
  Terry

• How can I connect my Kindle Fire to my PC via USB?

  I try to connect my Kindle fire with a USB port on my computer, and it says that the device driver cannot be detected, what can I do?

  When connecting the Kindle to the computer via USB, the computer sees the Kindle as it does with a flash drive.  This allows you to copy things and from the Kindle.  For example if you have a lot of MP3 files, you can use the connection to copy them into the folder of music on the Kindle.  If you have downloaded things from sites other than Amazon, you can use this connection to back up your computer.  Of course everything that you download on Amazon, you don't have to save because Amazon their backs until their cloud automatically.

  I hope this helps.  Good luck.

• Connect a printer HP Laserjet 4 parallel via USB using Windows 7 Home Premium 64-bit - HELP!

  I have a new Dell PC (Windows 7 Home Premium 64-bit) that does not have a parallel port to connect an old HP Laserjet 4 printer.  I bought a USB to parallel to connect the PC to the printer.  When turn on/off the printer, W7 installed an IEEE-1284 controller that appears in the unspecified list of devices in the control panel.  I "Has added a new printer", select "USB001 virtual printer USB port", then choose the correct printer driver (after "Windows Update" get a longer list).  When you try to print a test page, the 'ready' light on the printer starts to print, but nothing else happens.

  After experimenting with different settings, I was able to get a page to print that says "* s1M.  I don't know how it happened or what it means.  This suggests that the PC is 'talk' to the printer.  However, I was unable to reproduce this.

  HP support was able to help me, and I've been searching for an answer.  Someone at - it suggestions?  I wouldn't give up using a "workhorse" reliable printer for years. "

  You do not have a parallel port on the machine.  Whatever it is sent to the parallel port device should fail on writing.   Change the port to the port of USB00n, created when you plugged the cable.  You will see the port listed in the list of ports.  This will usually USB001 when you have not all printers attached otherUSB. Alan Morris Windows printing team;

• Ask the synchronization of Contacts and calendar via USB while using VersaMail with Exchange ActiveSync push email

  East of the request to add a new feature in VersaMail in a future version. A Palm support Rep suggested I post this here.

  I came across Palm Article ID: 42600 which States "once you set up an Exchange ActiveSync account in VersaMail, you will be able to synchronize the calendar, Contacts or by e-mail via the USB HotSync cable. Would be nice if this was not the case when the synchronization of Contacts and calendar are turned off. A call to technical support confirmed there is no way to do it with the current version of the product.

  I found a competing product, RoadSync from DataViz allows me to synchronize ONLY e-mail with ActiveSync, so it would appear to be technically possible.  The problem with RoadSync is is not a true push email on the Treo 680 and it seems a bit expensive with less features than VersaMail.

  Please consider publishes a new version or a patch to allow synchronization of Contacts and calendar via USB when you use Exchange ActiveSync push email.

  I can certainly present this as a feature request.

  Message relates to: None

• I want to connect my iMac 27 with a short cable usb flash drive so I can access it from the front

  How can I connect my 27 iMac to a front USB flash drive?  What is the best cable to use one of the connections thunderbolt?

  Adapters exist, but they are quite expensive to $80.  I just have USB to USB.

  https://www.Google.com/#q=Thunderbolt+to+USB

• Connect iPad Pro 12.9 "on PC 3 USB port using the new USB 3 iPad camera connection kit

  Hello. I would like to connect my iPad Pro 12.9 "to my PC using the speed of the USB 3 port of lightning of the iPad for faster synchronization with back ups. I bought the new camera USB 3 connection and A kit to A 3 USB cable, put everything together and down to iTunes, but it does not recognize the iPad. Has anyone tried this before?

  You don't need the Camera Connection Kit for this. Connect your iPad to your PC using the lightning to the USB cable supplied with the iPad.

• Try connecting a HD Maxtor ATA/HDD to via USB

  I'm trying to connect my Acer using an external usb connection a Maxtor 120 GB ATA/133 hdd.

  I am running windows 7, I do my homework = 1st glance all the answers in the driver and hardware section.
  By operating the diskmgmt.msc not find the connected HD in this option, the HD is originally in a dish DVR network. Maybe the problem is not a NTFS files.
  The only happens when turn on the drive for an moment to find a "IDE /...» "in devices and printers in Control Panel. I have try all options of rider HD (master, slave,...). Reject the option of connection cables and power everything works perfectly with a Western Digital 40 gb HD, understand why it's IDE. I try a few more things. As I said at the beginning, I do my 'homework' maybe to much to explain here. The question is: IS possible to use the Maxtor ATA HD as an external drive? If so, any suggestions.

  Hello

  I looked at the specs for each speaker you use and apparently is not compatible with operating systems Windows 7. Please check in the following link, once to check whether I look at the details of the correct case:

  http://support.thermaltakeusa.com/product.aspx?C=1434&ID=1649#tab1

  If this is the envelope that you use, I think you should get in contact with the support team for the manufacturer of this Chamber to check if you have options to make it work with Windows 7. Here is their support site:

  http://support.thermaltakeusa.com/

  Hope this gives a useful overview on the issue. Answer if you need help with Windows or this issue, we will be happy to be of assistance.

• Error in boot sequence because of the high voltage via USB port

  Hello

  I have connected a powerable Seagate hard drive external via USB of my touchsmart PC and powered the drive using an adapter instead of the supplied 5V 9V (was a mistake). The computer immediately stop (abnormally) and now when it starts it does not recognize the boot drive. The back will ask for the boot drive. My C drive has been fried due to higher voltage? (9 v or 5 V). Is it possible to fix this error, or if not at least can I recover data from the hard drive?

  Thank you

  Hello

  You could try to remove the hard drive and then place it in an external case 3.5 '' USB and then try it on another PC. This type of adapter may also be used to test the drive on another PC.

• How to connect the TV to Satellite L300-209?

  Hello

  I have laptop Satellite L300 Searies-209 and I need to connect the LCD Sony TV

  The Outbut is inbut HDMI and VGA
  When I connect the wire nothing happen in the LCD TV

  If anyone can help me please help me in this problem

  Hello

  The laptop seems to support only a single video output port and it's port VGA/monitor.

  I don't know which ports support TV, but you need a VGA cable to connect the laptop to a monitor.
  If TV would support a DVI port, then you could try a VGA to DVI.

  Welcome them

• Tine Capsule loses the connection to iMac on El Capitan

  So I thought to myself - allows to change Windows XP for IMac OS - X and I liked the theory behind Time Capsule.  So in Dec 15 bought the new iMac with El-Capitan installed - very nice - steep to overcome - but very nice learning curve.  In January 2016, I bought the capsule and time the iMac continues to lose track of it and the backup fails.

  I read a lot of posts on this problem with earlier versions of Mac OS x, but none with El Capitan.  I tried many suggestions.  I'm willing to stick to this, but concluded that Apple have big network problems - is there any known firm resolution that I missed

  If I unplug power of TC and plug it again TC restarts and fix the link and he stays for a while, but when the iMac system sleeps it seems to lose track of the TC.  The TC continues to work as a hub WiFi in bridge in the whole mode, although the link of TC - Mac itself is ethernet.

  I have the network as [router ISP-> switch-> TC-> IMac].  I have a PC, NAS, hooked to the switch and the printer off the TC - all (other than the iMac/TC) connections continue to work all the time (even the printer connected through the CT.

  Suggestions for things to try would be useful, but nobody knows if Apple are working on it?

  is there a known strong resolution that I missed

  No, it's still coming every day in the posts here.

  Apple tries to do new things via DNS and she has so far trained more than problems solved... It has to do with the hand and swapping the standard network structure and network on equal terms with the iphone or ipad. At least as far as I know. Don't hold me to him as we all users here... and some of the information Apple provide are extremely sketchy.

  I tried many suggestions.

  It is difficult to make suggestions that we really have no idea what you tried... I'll post a link to my standard list below...

  BUT el capo has introduced different bugs... and I find it hard to reproduce... Note that I have not really had most of the questions are people here. I do not use the TC in bridge... but actually force it to take in charge the functions of dhcp for these devices that connect directly to it... and you have TO connect the Mac directly to the CT... He got buried... I'm usually carefully noted the location... but Apple said you need on the computer directly connected to the TC... If it is ethernet or wireless is not a problem... but if you are trying to connect to the switch or the main router, it is not a good idea.

  So, I would recommend that you try this method.

  Re: time capsule Airport Guard disconnection

  There are screenshots of it... and if all that is hard to follow if you please tell me where you are stuck.

  I found I can now exchange the main router with a degree of immunity, as I reconfigure the DHCP and IP LAN on it to match my setup of origin... it's not hard... but it may take some time to wrap your mind around it.

  In fact right now I use a secondary antibody Airport extreme as a WAP browser on the primary... again to help people having to abandon the questions... and I have so far after that many days are perfectly stable.

  If you can do it... change the domain in the main router at the local level

  Maybe it's nothing or it could be something else, such as lan. So in fact, all your names are the. But if the main router uses a field other than mess a few things... Apple seems also is recommended to use the TC as the main router as preferable to the bridge... They recommend same NAT double bridge... IMHO, my static IP method solves the problem, where you can not replace the main router, and the TC regularly loses on the network...

  • A link to this post

• Connect the Airport Extreme via Powerlink to the cable Modem

  I have problems with wifi at home as the location where the my cable modem is far from ideal. I currently connected to an Airport Extreme, which works like the router (the cable modem has the router function disabled). Attached to the AE is also a powerlink and I have an Airport Express connected to the powerlink, which has its own network.

  I was wondering if it would make sense to connect the powerlink directly to the cable modem and then put my Airport Extreme, a more central location in my home connected via Powerlink and there accumulate this way, rather than the current configuration.

  I'm getting a second Airport Extreme soon as well and I have several express in my house, but the problem is that my wifi is not fast at all.

  Powerlink adapters are Devolo 600 & 1200.

  Thank you

  I was wondering if it would make sense to connect the powerlink directly to the cable modem and then put my Airport Extreme, a more central location in my home connected via Powerlink and there accumulate this way, rather than the current configuration.

  It's always a good idea to place the 'main' AirPort router as close as possible of the area where most of the wireless devices should be used in this sense, your idea is a good thing... and in theory at least. ... .the powerline adapters allow you to do.

  However, in practice... you won't really know how well... or even if... this type of installation will work until you try you. The reason for this is there is so many different things that can affect the performance of a type of current line of the installation program.

  If you have time, there is certainly no harm in trying this type of configuration.  Post your results if you decide to try it.

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• The airport will connect to the brother 2270DW via USB but not ethernet

  Apple replaced my Airport Extreme after only 9 months and it has been quite a challenge to get back to square one.

  On the older airport, I connected to my printer wireless Brother via an Ethernet port on the router, but now it does not detect the printer. I changed the cables without result. I have finally connected via USB to the airport and wireless printing is restored, but why didn't he see my ethernet port.  The port works because I am connected via a cable to my laptop and it lights up. I have a problem with the port or printer?

  He does not see my printer via ethernet. What gives?

  Thank you

  Alexander

  You have entered the system preferences in printers and Scanners and added to the printer?

• Qosmio F10-122: what are the pinouts of D-Terminal to connect the digital TV via HDMI

  I have the D-Terminal cable SCART, but this only works in analog (PAL) resolution.
  What are the pinouts of D-Terminal on nVidia FX Go5700 of GeForce to connect to a digital TV via HDMI and use higher resolutions?

  The F10 does not support HDMI port. It supports only the output port component.

  I've goggled a bit and found that you can use a HDMI adapter component
  There are also some adapters that support the resolution of the computer of the 1920 x 1200 px and 60 hertz
  So, you can connect this device to a monitor with HDMI port.

  Google for adapter * Gefen component and HDMI *.

  Good bye