Connect Sansa e250 to my audio devices via USB

Similar Questions

• Crack suddenly / audio distortion via USB interface

  Hello

  I use an iMac of retina end of 2015, which is connected to a USB AG06 Yamaha interface. The interface provides an audio output to my studio monitors.

  For these months, audio works flawless, but all of a sudden yesterday things got ugly. Briefly the sound works (often less than 30 seconds) then crackling / distortion occurs, causing finally audio fade out and back in. The problem is temporarily resolved if I disable the interface and turn it back on. I have not changed the settings or installed new applications - the question is just appeared from nowhere.

  Initially, I assumed that it was the fault of the USB interface, but I tested it on another Mac and it works without any problem. I tried to restart, stop, uninstall all additional audio devices, and disconnect all other USB devices, but the problem is still there. I tried other USB devices, including a Schiit Audio USB DAC on the iMac even, and it also works without any problem.

  Any idea is appreciated!

  Thank you.

  all USB audio devices act the role of being a card usb external audio such always needs a driver, don't know if there are any drivers for the card generic usb audio if I was you, then I go to yamaha and look for an osx for your version of driver for their product

  Apple do not have drivers for hardware devices of third party if included in osx, then it is because the developers of hardware committed a pilot tested and improved Apple and became part of the osx installation

  If a new version of Mac OS x is installed, and yamaha has not committed a driver or the same clerk driver than the last time and he could not test it because it displays the questions you experiences in some cases, and you are upgrading, then there is no new yamaha rider so your system just stick to previous driver

• How can I connect my Kindle Fire to my PC via USB?

  I try to connect my Kindle fire with a USB port on my computer, and it says that the device driver cannot be detected, what can I do?

  When connecting the Kindle to the computer via USB, the computer sees the Kindle as it does with a flash drive.  This allows you to copy things and from the Kindle.  For example if you have a lot of MP3 files, you can use the connection to copy them into the folder of music on the Kindle.  If you have downloaded things from sites other than Amazon, you can use this connection to back up your computer.  Of course everything that you download on Amazon, you don't have to save because Amazon their backs until their cloud automatically.

  I hope this helps.  Good luck.

• Recognizing the devices via USB ports

  So, I have problems my Dell computer laptop windows 8 based to recognize my Samsung flip phone so that I can upload photos.  I have not had any problems with other phones in the past, but I find it curious that windows 8 does not recognize my phone.  Any suggestions?  Just to clarify, the phone is connected via USB and it charges fine.  The computer also makes a noise (as if she recognizes the device) once it is plugged into one of the ports.  The unit simply does not appear anywhere...

  Sincerely,

  Frustrated incorporated

  It should appear under "My Computer" (or "This PC" If you have upgraded to Windows 8.1).  But remember, you will need to go to the Samsung website and download the driver for the phone first.

• Portege M800-106 the system freezes when I connect a device via USB

  When I connect a device through a USB port, the system hangs. This happened with any device even something that has been used before. Example - if I turn on the printer /plug in my Blackberry to synchronize the .laptop just going so slow that I have to do a reboot with the devices still connected to get the system working again. Running Vista. Any help please?

  Hello

  You see yellow exclamation marks in Device Manager? Maybe a driver isn't installed properly in the system freezes.
  In addition, I would try to remove the USB ports in Device Manager. After this restart your laptop and USB ports will be recognized again.

  Have you tried a BIOS update? If this isn't the case, you should do it. Before you begin the update, close all running programs and make sure that you are logged on as administrator.

  Last but not least try to reinstall Windows using the Toshiba recovery disc. It only takes a few minutes and then you have settings to factory again! :)

• BlackBerry software please update link (or the BONES of BB10) connection to connect to a device via USB with Powershare BB10

  After reviewing many topics:

  https://supportforums.BlackBerry.com/T5/BlackBerry-link/BlackBerry-link-no-device-connected/m-p/2515...

  https://supportforums.BlackBerry.com/T5/BlackBerry-link/link-won-t-recognize-Q10-on-Mac/TD-p/2912982

  http://forums.CrackBerry.com/BlackBerry-link-F300/BlackBerry-link-Windows-8-1-cannot-recognize-black...

  I discovered that the problem of not recognizing device with link performed from USB (2.0 and 3.0) port with Powershare function.

  I don't think it was the problem of the computer (laptop) with this feature because it will be a trend now.

  So please update link or BB10 OS this link can recognize peripheral BB10.

  We look forward to good news from Blackberry!

  After the 10.3.0.1418 (sunk), now the link and my BB Q10 is connected!

  Thanks to the 10.3

• BlackBerry Smartphones has tried to update the device software, now unable to connect to the device via USB

  I tried to update my 8100 to the 4.5 software.  I first updated the desktop to 4.7 software, then tried to update the device, but the process has failed.

  Now, when I open the Desktop Manager it shows not connected to the device.  I can go to the properties of the device mamager and select the balckberry, but when I return to the destop eat it says no device.

  It seems that whatever I do, it does not recognize the usb device.

  The display on the 8100 is company information only text, no graphics or by phone, and it is virtually unusable.

  There are options on the screen for some applications, but if I choose them, it says app not found.

  Is there a way to force an update to it?  Or I poohed this phone?

  Thanks in advance

  Edit:

  I pulled the battery on the device it reboot and tried to return to a former Office Manager Update

  1. unplug BB from USB and PC. Restart the PC turned off completely.

  2. for BB, you'll charge back to the theme that was used on the device when you upgraded, which will normally give you a black and white screen. You must follow the instructions below.

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

• How to connect Ipad to a digital audio device?

  Hi, I use my Ipad for recording with Garageband.  I had connected my Ipad 2 to my mixer using the camera connection kit and a USB cord.  The end of the USB is a USB B.  http://www.C2G.com/UK/static/content/images/resources/connector-guides/450/035_u sb_b_f_iso.jpg

  This configuration doesn't work anymore since I was an Air of the Ipad.

  So, how can I connect the Air Ipad USB b?

  You can try with the lightning to the USB camera for newer iPad adapter. It's the same thing the Camera connection kit has done with the older.

  http://www.Apple.com/shop/product/MD821AM/A/lightning-to-USB-camera-adapter

• Connect a printer HP Laserjet 4 parallel via USB using Windows 7 Home Premium 64-bit - HELP!

  I have a new Dell PC (Windows 7 Home Premium 64-bit) that does not have a parallel port to connect an old HP Laserjet 4 printer.  I bought a USB to parallel to connect the PC to the printer.  When turn on/off the printer, W7 installed an IEEE-1284 controller that appears in the unspecified list of devices in the control panel.  I "Has added a new printer", select "USB001 virtual printer USB port", then choose the correct printer driver (after "Windows Update" get a longer list).  When you try to print a test page, the 'ready' light on the printer starts to print, but nothing else happens.

  After experimenting with different settings, I was able to get a page to print that says "* s1M.  I don't know how it happened or what it means.  This suggests that the PC is 'talk' to the printer.  However, I was unable to reproduce this.

  HP support was able to help me, and I've been searching for an answer.  Someone at - it suggestions?  I wouldn't give up using a "workhorse" reliable printer for years. "

  You do not have a parallel port on the machine.  Whatever it is sent to the parallel port device should fail on writing.   Change the port to the port of USB00n, created when you plugged the cable.  You will see the port listed in the list of ports.  This will usually USB001 when you have not all printers attached otherUSB. Alan Morris Windows printing team;

• Try connecting a HD Maxtor ATA/HDD to via USB

  I'm trying to connect my Acer using an external usb connection a Maxtor 120 GB ATA/133 hdd.

  I am running windows 7, I do my homework = 1st glance all the answers in the driver and hardware section.
  By operating the diskmgmt.msc not find the connected HD in this option, the HD is originally in a dish DVR network. Maybe the problem is not a NTFS files.
  The only happens when turn on the drive for an moment to find a "IDE /...» "in devices and printers in Control Panel. I have try all options of rider HD (master, slave,...). Reject the option of connection cables and power everything works perfectly with a Western Digital 40 gb HD, understand why it's IDE. I try a few more things. As I said at the beginning, I do my 'homework' maybe to much to explain here. The question is: IS possible to use the Maxtor ATA HD as an external drive? If so, any suggestions.

  Hello

  I looked at the specs for each speaker you use and apparently is not compatible with operating systems Windows 7. Please check in the following link, once to check whether I look at the details of the correct case:

  http://support.thermaltakeusa.com/product.aspx?C=1434&ID=1649#tab1

  If this is the envelope that you use, I think you should get in contact with the support team for the manufacturer of this Chamber to check if you have options to make it work with Windows 7. Here is their support site:

  http://support.thermaltakeusa.com/

  Hope this gives a useful overview on the issue. Answer if you need help with Windows or this issue, we will be happy to be of assistance.

• Connect the iMac G5, 2005 on TV via USB to use the TV as a monitor

  The desire to use a new TV as a monitor for an iMac 2005 G - 5. Using the usb connection. The TV is not connected! (The computer lacks HDMI port; it has a firewire port, but I can't find a firewire-HDMI connector, so use the usb ports. Suggestions?

  Thank you.

  Not what you want to hear, but I suggest you post in the forum of Power PC. This forum is for Intel based iMacs.

• My dosent Matthew detect my USB and other devices via usb port

  I am running xp in my Matthew I can't find my usb even devices in my management of the disks as I think that something is wrong with the usb drivers

  Hello

  I suggest you try to execute this fixit and see if it helps:

  http://support.Microsoft.com/kb/925196

  For more information, see this link:

  http://support.Microsoft.com/kb/310575

  It will be useful.

• There is no audio device installed in Windows 7

  Recently, after that my father could not turn on the protector of windows he was afraid he had a virus on our computer. It turns out that it was simply because we are under windows 7. MSE runs under windows seven. It does not recognize the name of the driver removed from the computer and audio. After that I realized why the Defender turned we tried reinstalling the audio driver with mixed success. There is no sound on our computer and the program appears in the Manager for devices with a warning triangle. When I open the program the master volume down without any apparent way to raise it. By clicking on the button mute or dragging the roller on the meter is not do. The audio store is no help and the computer repeatedly says there is no audio devices installed by clicking on the when I try to adjust the system volume or manage audio devices via the control panel. We have a Dell E6540 and our CODEC IDT audio driver.

  Original title: Audio problems

  I found a solution to the problem. The compiter was pluged into a hub. After performing a clean boot, I uninstalled all audio ports via the hub. After doing this, I was able to install the driver. Windows Defender has not executed because MSE is the security system by default on windows 7.

• Osprey fisherman-230 Audio Device 1 didn't come out all sounds (Osprey-230 Video Device 1 outputs video though)

  When I use Acrobat Connect Pro, I am trying to use my microphone 'Osprey-230 Audio Device 1', but it is not out of any sound for users of Acrobat Connect Pro to the meeting. On the other hand, I was using "video Osprey-230 1 device" as my webcam, and it displays the video. I know that Adobe was working on obtaining Adobe Acrobat Connect Pro compatible with "Osprey-230 1 video device" in the past, and dealing with problems that seem to have been resolved. I think that the question that I'm a report is a compatibility issue as well. I've always been using Adobe Flash Media Live Encoder 3 with 'Osprey-230 device Audio 1' defined as audio and "Osprey - 230 Video Device 1" such as video, audio and video are very good printed in the FLV files that Flash Media Live Encoder stream.» Acrobat Connect Pro supports "Osprey-230 Audio Device 1? Thank you.

  Brian, I had this problem in one of my classrooms as well of telelearning. Try disabling audio improved under meeting-> preferences-> Microphone. I don't understand what is the cause of this problem, as I have 3 other rooms using the same device which seem to work well. I hope this helps.

• Is it possible to debug an iOS device via a USB rather than using the network?

  Hello

  Is it possible to debug an iOS device via USB instead of using the network? I want to test demand for offline scenarios. Please let me know.

  Thanks in advance,

  Swathi.

  Router is on but disconnected from the internet. Your computer is assigned an ip address by the router. It will be something like 192.168.0.1 the IOS device can be 192.168.02. Most of the routers will identify attached devices and their IP via the administration panel. If you receive a Windows command prompt and type ipconfig, you will see the IP address of the PC.

  Your router is now a LAN - is differrent from being connected to the internet.