Connecting TPT for Mac computers

Similar Questions

• P1102w: connect wireless for mac

  Last week, I got a wireless connection between my iMac and my laserjet P1102W printer, but it was disconnected so far. I followed all the instructions on the pdf user guide, but they do not work.

  Thank you

  Well, the printer seems to have lost its wireless settings. Ideally, to address this issue, you can run the installation program for the printer on a Windows PC. If this isn't an option, then proceed as follows:

  1. Make sure that the printer is plugged directly into a wall outlet, not a surge protector.
  2. If the printer is connected via the USB cable to your Mac, delete it.
  3. Turn the printer off.
  4. While the printer is turned off, hold down the two buttons on top of the printer.
  5. While you hold the keys, turn on the printer.
  6. Continue to hold the buttons for ten seconds.
  7. The value of Safari as the default web browser.
  8. Click on your Apple icon, system preferences and printers and Scanners.
  9. Hold down the CTRL key and click the icon of your printer on the left.
  10. Click on reset printing system.
  11. Plug the USB cable from the Mac to the printer.
  12. Click on the printer on the left.
  13. On the right click on Setup, then utility, open utility printer and EWS Server.
  14. In this window, click the network tab.
  15. Click on wireless on the left.
  16. Click Activate.
  17. In the list, select the name of your network.
  18. Click on the button with the arrows.
  19. Select your type of encryption WPA/WPA2.
  20. Enter your password wireless in this window.
  21. Click on apply.
  22. If the light on the printer wireless to allume lit in blue, disconnect the USB cable.
  23. Back to Apple, system preferences and printers and Scanners.
  24. Hold down the CTRL key and click the icon of your printer on the left.
  25. Click on reset printing system.
  26. Click the more in the lower left corner.
  27. Select your printer from the list.
  28. Click the check box next to and select your printer from the list.
  29. Click on Add.

  Please let me know if you are able to print. If you are not, please tell me what has happened by following these instructions.

• Photosmart 4380 cannot be connected wireless for Mac

  Hello

  I had the Photosmart C4380 for a little more than two years now. I have always used wireless in a network with multiple Macs. However, I lost the Setup wireless when switching to a new provider and a new router and have not managed to reconfigure to print wireless again. I can print without problem through the USB port.

  Here's the problem: in trying to set up using the Configuration Wizard, the printer is recognized as connected via USB. However, when I check the possibility to configure the wireless connection, I get a message that I need to connect the printer via the USB port. Somehow, it does not seem to recognize that the printer is already connected via USB. I tried to use another USB cable, but that does not work either.

  Strangely, the printer does not appear in Hello either.

  I already tried to restore the default settings of the printer network, and allows switching on and outside wireless radio, but nothing.

  I use Mac OS 10.6.5, which should have all the correct drivers built in.

  I get the error message is 'to configure the network settings for the selected device, you will need to temporarily connect via the USB port. Can disconnect USB once the settings have been transferred". Problem is that it is connected, but somehow my stupid Mac does not seem to understand.

  Someone knows what to do here? I'm getting desperate!

  Here are a few ideas:

  1. to connect the configuration wizard, make sure that the USB cable is disconnected.

  2. maybe you software HP DO NOT intended to be 10.6?  If so you have to get rid of it with the 'scrubber' option: If you are using

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• bus to daet for mac book 13 "

  1. How will I know what my last version of the BIOS?
  2. is it necessary to update the BIOS on my computer right now for computer work better?

  3. How can I update?
  I have a Mac and the white beech of 2006 13'

  Model name: MacBook

  Model identifier: MacBook2, 1

  Processor name: Intel Core 2 Duo

  CPU speed: 2 GHz

  Number of processors: 1

  Total number of cores: 2

  L2 Cache: 4 MB

  Memory: 4 GB

  Bus speed: 667 MHz

  Boot ROM version: MB21.00A5.B07

  Version of the SCM (System): 1.13f3

  Motion sensor sudden:

  Status: enabled

  Your MacBook firmware as well as the boot ROM is updated, you must update.

  On the updates of the EFI and SMC firmware for Mac computers with processor Intel - Apple Support

• Anti-virus/Internet security for Mac software?

  Thoughts about whether Anti Virus/Internet security software is necessary for Mac computers?  How about a new college student?

  If so any recommendations on which one to use?

  Thank you

  Mark

  You do not have anti virus for Mac.   Review carefully on known sites and you should have no trouble.   Don't download questionable sites (Cnet, MacKeeper and similar).   If you are unsure about a site, ask here in the forums.

• best online backup for mac computer program

  Hello

  I am looking for advice on the best program of online backup for mac computers.

  I tried iDrive, but does not not for my macbookpro and customer support really! *

  Thus references of good experience with online backup companies would be a real help.

  Thanks in advance,

  Pat

  I can't tell if it's the best but I used Mozy for several years and have been happy with it. https://Mozy.com/#slide-9

• no connection for Mac

  Anyone had problems installed a connection on a mac with 10.5.6 worm. Computers portable windows work fine. but when I try to install the anyconnect on a mac, I got an error from the installer was not able to launch the vpn client.  It's the version I; m installing anyconnect-macosx-i386 - 2.5.0217 - k9.pkg. Not sure if this is correct, because I'm not much a mac guru. Any help would be appreciated. Thank you

  Hello

  You use the Web-launch feature?

  i.e. to join for ASA using a Web browser, and then try again to install the client?

  You can also try the stand-alone installation using the installation file with the extension "dmg" which can be downloaded EAC. You should be able to install this file directly on the Mac.

  Thank you

  Naman

• Connecting to a Mac TC cable ethernet for external storage only

  I scoured these forums looking for a solution to my problem, but nothing I've met has worked so far.

  I have a TC of 2 TB.  I'm sure, it is considered as 2nd generation to 99%.  My Mac is a 21.5 mid-2011 "El Capitan running.

  What I'm trying to do is (should be) pretty simple, but I just cannot get this to work.  I live in the glue, so internet high speed cable is not available and I'm stuck with Verizon DSL via the telephone line.  Go ahead... Take minute for model / to feel sorry for me... I'll wait.  OK, so I have this DSL modem/router from Verizon Wireless and my TC does not seem to play well with it, when I joined the network.  Internet continues in and out and wireless file transfer is so slow.  So I would just remove my TC of the network, disable the wifi signal that he died, and connect to my Mac via the ethernet cable and use it strictly as an external hard drive for my media files.  Any help on how to do this would be appreciated.

  Go ahead... Take minute for model / to feel sorry for me

  I live in important suburb of Melbourne in Australia and count myself "LUCKY" to get DSL to about 6 Mbps, then you are the global average, I guess for internet.

  (Of course we have a Conservative Government... think Republican or Tory... whose the idea of fast internet is something from the years 1990) A conservative, he also seems = backward.

  I have a TC of 2 TB.  I'm 99% sure, it is considered as 2nd generation

  It's really unlikely... they sold a handful.

  Look on the bottom... paper A1409 label is gen4, molded into the first line of rubber... Gen3 is A1355... A1302 is Gen2 and extremely likely.

  So I would just remove my TC of the network, disable the wifi signal that he died, and connect to my Mac via the ethernet cable and use it strictly as an external hard drive for my media files.

  You can do this... * If you? *

  The method is here.

  Time Capsule using wired for Mac for backup only.

  It is a bit tricky because of the gateway and DNS issues.

  If you need more details give me a screenshot of your network on the Mac wireless connection.

  * If you *.

  A self powered 2 TB 2.5 "disk connected to the back of your Mac. will be invisible... it will be faster and much more reliable than the old TC.

  It will allow your local files not network... and therefore the time Machine will work... Time Machine backup impossible of network drives. It can use as the target source ever.

• HP 4635 for mac: hp 4635 for mac wireless connection

  Reconnect the printer HP 4635 for mac wireless. The printer screen asking WPA/WEP. Do not have. Having the password wireless modem several SSID. Can not enter digital password on the printer screen. What I am doing wrong? Feel very incompetent as a printer connected easily several years ago

  Please help me to overcome this simple mental block.  Thank you

  John Margo

  Hello

  By entering the password, you must press the key several times to switch between its different characters, such as those used to type a SMS with mobile devices...

  for example, each press of the button 2 you place a, b, c, then 2.

  Kind regards

  Shlomi

• Messenger for Mac connection failed because the service is not responding

  After downloading the Messenger for Mac.8.1 I tried to connect but got the message "connection to Microsoft Messenger failed because the service is not available or you may not be connected to the internet." I am connected to the internet and disconnected from Windows Live messenger. I tried to change my account. I have an OSX6.8 Mac Snow leopard. Nothing works, please help.
  Thank you

  Hello

  Since you are facing this problem only with MSN messenger, I suggest you to contact MSN messenger support group or posting in the support for assistance on the same forums.

  Here is the link: http://windowslivehelp.com/product.aspx?productid=2

  It will be useful.

• Remote access client 2.0.1 for Mac OS 10.4.11 connection to the remote server running Windows Server 2008 R2

  I have a mac with OS 10.4.11 and I try to access a remote server running Windows Server 2008 R2.  I have installed, uninstall and reinstall the Client of remote access for Mac 2.0.1 but I can not connect.  My network administrator tells me that Mac OS 10.4.11 is so old and useless that I am better just throw my computer and buy a new one in order to solve the problem.  This is absurd.  Can you help me?

  Hi Benjamin Spicer,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the Forums TechNet Remote Desktop Services (Terminal Server Services).

• I can't connect to my WiFi using windows xp sp3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  I can't connect to my WiFi using windows xp SP3 on bootcamp for Mac OSX Snow Leopard 10.6.8

  On the side of my computer's mac, the internet works fine.
  I just want the computer to recognize my home network, but it's as if we want a modem connection.
  Ask what you need to know the specs.
  I do this to play Halo on my Mac.

  This is the problem (which I corrected).  It's simple, all you have to do is to switch to XP, insert your mac installation disc and follow installation bootcamp, with all the drivers for mac compatibility.  The wireless just popped up as active.

  I lost my, but this isn't a problem: just go to the apple Web site, use the express track, diagnose your problem and have a representative call you.  They answer in a few seconds.  Replacement CD is very cheap ($16-2011).  You can get the CD of requests for replacement, which is another $ 16, but it is not important; XP does not use it, only the operating system for the drivers.  Mine came very quickly, in just 2 days.

  Hope that answers questions from the Internet.

  Now to play online Halo with my FPS Pro controller! 8 D

• Instructions for Mac connection to LJ P1102w wireless

  I just bought a new HP LJ P1102w for our conference room to serve a printer without comment thread.  I want to enable wireless printing, but not to join our enterprise network for security reasons.

  I use a Mac 10.6.3, which says that the package and instructions is supported under way of execution.

  I can't do the wireless to connect with my Mac, and there is no instructions for the use of a Mac - only to install wireless by using the CD - that has wireless options or guest.

  Anyone have any ideas?

  I had all the trouble that you guys are self-describing. I then implemented flawlessly on another system. That's what I did.

  1. when I put it up on my own system (laptop #1), when I installed the driver, I checked the box for a set up USB, rather than a network configuration. Maybe it's a difference, I don't know. In any case, when I put it up on top of another system (laptop #2), when I installed the driver (using the supplied CD), I checked the box that says "network printer". Maybe that makes a difference.

  2. I have had no bad USB connection setting.

  3. I then configure for use with an Airport Express station. I unplugged the Airport Express, attached the printer with a USB cable, plugged in and re-installed Airport Express with its installation software (which is on the laptop in applications / utilities / Airport utility). I have reset to factory, but only changed settings two windows: If use with iTunes and confirming the use with the printer (which appeared in the window as Hewlett Packard...). As I went through this procedure, I did a duty to observe that the password was not in WEP and WPA/WPA-2. I concluded the reconfiguration of the Airport Express. Now I connected the USB cable to the laptop Mac #2. I went through the Apple / system preferences / print and fax, has highlighted the LJ P1102w, etc., etc., as it is stated in the Youtube video. I chose the Airport Express as the SSID and used encryption WPA/WPA-2, alphanumeric and entered the Airport Express password. I then closed it all out as it shows in the Youtube video. I plugged the USB cable in the Airport Express. Then, I removed the printer from my list of printer as shown in the Youtube video and clicked on '+' to add a printer. Up jumps a printer Hello "Hewlett Packard," I added. I was able to print now 'Wireless' laptop #2 with the printer connected by USB cable to the Airport Express.

  4. I then plugged the USB cable in my computer and to the high jump the USB printer in my list of printers. I followed the Youtube video all over again, with basically all the previous settings. After running through the procedure, I've removed the USB printer (keeping the Airport Express printer), unplug the laptop Mac #2 USB cable and click on '+' to add a printer. A few seconds later, jumped up to a Hello LJP1102w printer, which I clicked on Add.

  -C' is to say that the printer unit now works in three different ways on this system (Mac laptop #2), all depending on how I put my default in the computer.

  -I think that the differences between my first failure and the subsequent success has been

  A. ensuring that I select the pilot of 'network' at the beginning, when you install the driver on the CD provided

  B. ensuring that I use encryption appropriate (which, for the Airport Express was WPA/WPA-2)

  C. unplug the laptop USB cable before searching for the printer Hello.

  D. I do not know if the OS X makes a difference. Laptop #1 is 10.5.8 (Leopard), while Portable #2 is 10.6.6 (snow leopard, as in the Youtube video).

  -So, as I say, I had a very easy installation and successful triple, following a frustrating initial attempt. On this first attempt, with #1 laptop, I could do two of the three works, but you have a wireless printer. And be fully wireless is really very cool...

  Maybe something in that will help the rest of you guys. Good luck.

• On Mac computers, they have a program called IMovie... is there something like this for Windows 7?

  On Mac computers, they have a program called IMovie... is there something like this for Windows 7? If yes where can I find it? Thanks a bunch! I'm new to these forums, hope so I ask in the right place!

  Original title: film making program

  Yes, you are in the right place.

  So that in my view not as powerful as iMovie, you can download the following Windows Essentials to add applications such as Movie Maker, Messenger and SkyDrive Photo Gallery on your computer.

• If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  Hello

  -You use Boot Camp as the Boot Manager? If so, make sure that all boot camp for Windows 7 drivers are installed.

  -You receive an error message?

  If you use Boot Camp, I suggest yo 1All operations from the below mentioned link and check if the problem persists.

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  For reference:

  Support for Boot Camp

  http://www.Apple.com/support/Bootcamp/

  Hope this information helps.