Connection lost to all the files on Mac. PS11 shows wrong place

Similar Questions

• I have a problem downloading of updates. Windows Update seems to work very well, but never actually, it connects and downloads all the files.

  What happens on my Windows 7 box and a box of Vista, so I think that the problem is a little wider than just the operating system.
  I have a resolution that really is not fine with me, that turns the firewall while I download updates. I tried to add programs to the firewall exceptions list update, but nothing helped.
  Did he have to happen and it resolved? I would certainly appreciate a good solution to the problem.

  Thank you.

  See:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  FYI b method: make sure that the Windows Firewall is enabled and temporarily disable third-party firewalls

  TaurArian [MVP] 2005-2010 - Update Services

• I lost all the file associaation, with the exception of aol, how do I add these files?

  I lost all the file associaation, with the exception of aol, how do I add these files?

  Hello

  1. what happens when you try to open a program?
  2. have you made changes on the computer recently?

  Try the steps listed in the article below and check.
  How to change or choose the program that starts when you double-click a file in Windows XP
  http://support.Microsoft.com/kb/307859

  I hope this helps.

• computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how do

  computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how to do it, in simple terms,

  Thank you.

  If by "computer of new beginning" you mean that you have started your recovery or disk restore factory set and reinstalled Windows, then the ability to recover your files is practically zero.  You can try a utility like Recuva (http://www.piriform.com/recuva) but since you have rewritten the entire hard drive, it is highly unlikely that anything will be recoverable.

• I have lr 5 installed on my mac, I want to buy photographer cc (lr and ps) monthly subscription. How this will affect the already installed lr version... it will update my current version. I'm worried about all the files and it works

  I have lr 5 installed on my mac, I want to buy photographer cc (lr and ps) monthly subscription. How this will affect the already installed lr version... it will update my current version. I'm worried about all the files and work that I already have in my current version of lr 5? Thank you

  You can make reference to: Lightroom and Creative Cloud FAQ   using Adobe Photoshop Lightroom | Lightroom / Common Questions

  Concerning

  Baudier

• 2015.3 CC - have lost all the file audio problems video / links too

  I've upgraded to 2015.3 this morning.  Started working with a project that was shot entirely with a Panasonic GH2... and have never had any problems with it. Now in 2015.3, the project opens with none of the video on the timeline linked to their respective folders. When I try and make the link... video links and there is a message that tells me the audio isn't there... specifically the message is: the selected file contains audio media used by clip references in one or more sequences. These references to audio clip will be deleted and cannot Ωtre annulΘe. Do you want to continue? OK Cancel of course that I have to cancel, not knowing if the audio will be permanently deleted. Files from the GH2 are .mts files and it is certainly audio when played with a media player. So my question is... is this a problem with the format .mts or it's Adobe. I'm afraid to open another project that has files, .mxf or mp4 and brought them to the point completely dissociated.  Here is a screenshot.  Can I just go back to 2015.2 until find you it?

  

  Dave Speace

  Video DZP

  Core i7 16 GB 64-bit

  If it worked once I deleted all the files in the shared folder. Other problems are: first runs slower, stutters during playback and sometimes freeze clips or audio is not reading... I have to stop playback and restart. Also, string stabilizer would not be made on one of my clips. Should he hold PP6 and try it rendered as a new clip.

• Get windows message could not connect to windows all the service of user agent install.

  Unable to connect to a windows service. Windows could not connect to windows all the service of user agent install. This prevents standard users to log on.
  As long as administrator, you can go through the system event log to see why the service did not respond. I don't know how to look at the newspaper and how to solve the problem if I do.

  Hello

  (1) did you make any changes before the show?

  (2) when exactly you get the error message?

  (3) you are able to connect to the desktop computer?

  Method 1: check if all windows users install agent service is started.

  a. press theWindows key + R, type services.mscand press ENTER.

  b. search service namedWindows user all install service agent.

  c. Windows user all install service agent must behandwritten.

  d. check if it is started, otherwise do a right-click on the service and clickStart.

  Method 2: Troubleshooting maintenance system to operate.

  a. press theStart button on the keyboard.

  b. click Control Panel.

  c. typeTroubleshooting in the 'search' tab, and press enter.

  d. clickshow all on the left panel.

  e. clickSystem Maintenance, new window will appear.

  f. follow the instructions on the screen.

  Method 3: run System File Checker Scan to fix the problem with missing or damaged files.

  a. press the Windows key + X, and then click command prompt.

  b. type the command:sfc/scannow , and then press on Enter.

  c. restart the computer and check.

  Note: The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

  You can check the link for more information.

  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  Disclaimer clause.

  The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Had to download all the files and make a new site where is index.html

  I lost my hard drive and all downloaded from Godaddy.  It seems that I have all the files.  I have the site > new put all the info and tested by Godaddy.  I noticed that there is no index.html.  When I make the new site and has all the files I need create an index.html.  Where this file should be placed.

  Thank you

  Mike

  What is the easy way with DW to download files of a Web site for later use.  I'll copy and save all these files, so I don't have to do this again.

  1. define your site in DW.  DO NOT EVER USE DW WITHOUT FIRST DEFINING a SITE (at least the local part of the site).  Make sure that you are entering the local information (really just where is the local root folder of the site and the name of the site) and distance information (the location of the remote site and FTP connection information).

  2. after the site is defined, you can now CONNECT to the remote site by clicking on the icon to connect to the files Panel.

  3. Select the name of the folder in the foreground on the REMOTE side of the list of files and RECOVER the files by clicking on the arrow in the files Panel toolbar.

  It is simple and easy.  You have now all that has been at the remote site nicely nestled in your folder local root.

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• How can you save dead MacBook using FireWire for iMac? I can view all the files on iMac, but don't know how to back up before, I reinstall MacBook.

  My MacBook Pro doesn't start then you want to erase and reinstall iOS. Before doing this I want to back up all my files. If I connect to imac via FireWire I can view all the files, but how can I save it it?

  If your MacBook will start in target disk Mode, follow the instructions on how to set up and use...

  Share files between two computers with target - Apple Support disk mode

  But you do not want to share files, just to save them. You can make a "clone", using disk utility. For cloning utility purposes use a program likeSuperDuper! or double clone.

• How can I erase all the files on my iPod Nano (6th generation) and start over?

  I can sync is more manually all the files that I need on my iPod Nano (6th generation) to my Macbook (OS 10.6.8) because it is full.  Instead of delete folders and songs about the Nano, which would take forever, I'd rather delete it all and start by cleaning up the folder that I keep in my iTunes library (11.4), then by loading all on the Nano.

  How do I:

  (1) delete all music from the Nano?

  (2) see how many in the iPod folder in my iTunes library Macbook so I know what to remove?

  I know this must be a simple process, but it's been a long time I did!  Thanks for any help out there.

  When your iPod is connected to your MacBook, open iTunes, click on your iPod in the sidebar and in the 'Summary' tab, click 'Restore iPod.'

  If you don't see the sidebar in iTunes, go to the view menu in the menu bar, and then click see the sidebar.

• How can I transfer all the files from an iPad earlier to a new iPad pro?

  I'm considering buying an iPad pro and want to transfer all the files from my iPad generation (big connector) prior to the new.

  Is it possible directly, and is there a cable to connect the of LIGHTNING current in style making earlier?

  Or it's done via WiFi?

  You have a computer?

• I deleted all THE files of rendering but have still 1.5 TB of unidentifiable used disk space. I don't have FCPX libraries on my 3 TB drive. Total area of libraries: 650 GB still Get Info says I use 2 100 GB! Any ideas? Thank you.

  I have deleted all THE files in my libraries FCPX rendering but have still 1.5 TB of unidentifiable used disk space. I don't have FCPX libraries on my 3 TB external drive. The total size of my libraries is 650 GB (when I add up the individual), but when I click on read the information for the reader, it says that I use 2 100 GB! It does not show that everything is on the disk. I went in each library individually in FCPX and deleted all THE files of rendering.  Reducing the total size of several concerts, but there are still almost 1 500 GB difference.

  I tried to copy all libraries on another drive and they occupy only 650 GB (with no unidentifiable used disk space). I'm a bit confused.  Someone at - it ideas?  I would like to release 1.5 TB that starting to use the new hard disk with only 650 GB and reformat the drive, but if there is some kind of hidden, important files on the original drive as FCPX needs to work properly I won't ruin the hundreds of hours I spent on editing. I hope that all makes sense. Thank you in advance.

  I use an iMac 27 "with 3.4 GHz Intel Core i7, 8 GB of memory, NVIDIA GeForce 1024 MB graphics, OS X Yosemite 10.10.5, FCPX 10.2.2 3 TB Seagate USB 3.0 external hard drive designed for Mac and format Mac OS extended (Journal)

  That doesn't sound right. The sound of back numbers compared to what could happen.

• Lost access to the files on the hard drive.

  After you use the SYSTEM RESTORE, my office has lost access to all my files of data written and the pictures on the hard drive.

  I tried a backup disk or restart several months ago, but the drive will not read it!

  How can I restore access to "My Documents" and other folders?

  I use Windows XP with all updates of February/March 2013

  Alan / Alfasun

  [Moved from comments]

  Hi Alan,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that you have lost access to the files of data and images after doing a system restore.

  I would appreciate it if you could answer the following questions to help you best:

  1. Why did you perform a system restore?

  2 do you have questions about the computer?

  3. If so, please specify the question to better help you?

  4. What are the data and images file format?

   

  System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system.

  Based on the current situation, I suggest you to Undo a restoration of the system after performing a system restore.

  Check out the link and check if that helps.

  http://support.Microsoft.com/kb/306084

  If the problem persists, or you have any questions about the restoration of the system, do not hesitate to let us know. We will be happy to help you.

• What burning CDs in Windows Media music system prepares all the files listed.

  What burning CDs in Windows Media music system prepares all the files listed.  When the system starts writing the files on the disc it gets through about 4 songs and then goes to finalize the disc and ejects the disc.  The disk does not appear to have anything on it.  Can I do anything locally to solve the problem?

  My system is XP.

  I burned the disc a lot in the past

  There has been no major changes to the system

  The files I am to burn to the disc are previously ripped files on the disk hard, some of them were burned on another drive before.

  I tried to slow down the burn speed, but that did not work.

  CD burning problem

  Hello

  • You receive an error message when burning CDs?
  • What were the changes made before the issue started?
  To resolve this problem, do one or more of the following and then try again:

  a. Verify that the CD burner is properly connected.

  b. clean the disc and verify that it is not damaged.

  c. try a different brand of blank discs.

  d. If another program is currently burning files on the CD, wait until the burning process is completed.

  e. Quit other programs that may be using the CD burner.

  f. restart Windows Media Player.

  g. restart your computer.

  h. use the Windows error-checking tool to find system errors of files with bad sectors on your hard drive. For more information about the error-checking tool, see Windows Help and Support.

  You can check: http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=C00D0019