Similar Questions

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• the .xml file will not hold the new version I am writing on the 'AIR for iOS settings' window on Flash cc 2015

  Hello

  I need to download a new version of my app on iOS, but the .xml file will not hold the new version I am writing on the 'AIR for iOS settings' window on Flash cc 2015. It keeps appearing as:

  <? XML version = "1.0".

  also when I try to download the new .ipa on iTunes Connect with the Application Loader, I get this message:

  "" "ERROR-ITMS-4238:"redundant binary Upload. " «"" "" There is already a binary download with release ' 1.0.0' train ' 1.0.0 ' "at SoftwareAssets/PreReleaseSoftwareAsset»»»

  The problem is not of Application Loader or iTunes Connect as when I open again the .fla and check the window 'AIR for iOS parameters' he continues to display the 1.0 version over and over again. If Flash isn't that save the .xml file.

  And it happens with all my other apps Android or iOS, old and new versions, all appear as <? XML version is "1.0" on the .xml file.

  Is anyone know how can I solve this problem?

  Thank you.

  There are two different values, the build number and version number. If you use a test flight, you can submit an update without obtaining a review by increasing the build number. If you are submitting an update to an application in iTunesConnect, you must increment the version number.

• Animate CC 2015 Air for iOS full screen problem

  Hello team Adobe,

  I made many applications for iOS and Android. And I am facing 1st time a problem only in the Air for iOS. Air for Android works perfectly well. What I'm dealing with that

  even after using this code:

  internship. Align = StageAlign.TOP_LEFT;

  stage.scaleMode = StageScaleMode.EXACT_FIT;

  I see black bands top & bottom of my application. Then I downloaded the new SDK is Air SDK 21.0 but same problem :/ Please tell me as soon as POSSIBLE, why is that happening?

  Thank you

  Saad

  Hi Saad Aftab,

  I tried with the attached draft you shared.

  If this problem could be solved if you add images to your project.

  Please try the application after giving the images of the launch of the publication. The application will launch in full-screen and there will be no black bands if you have already configured the 'true' parameter in app.xml.

  Please let me know if you face any problem.

  Thank you

  Adobe AIR Team

• Download of AIR for IOS via the Application Loader I get the following error - the package does not contain a file Info.plist.

  I publish a .fla in the AIR for IOS.

  I'm in 2014 CC, so first I need to know what AIR I should publish in?

  more recent is AIR 14.0.0.178 for IOS

  IOS deployment type is App Store

  published with no error.

  I see that the following files included app.xml and .swf

  I converted the .ipa to a zip file

  Download through the Application Loader, I get the following error

  The package does not contain a file Info.plist.

  Here is the infoplist for that and convert the .ipa and the info in a zip file?

  I converted the .ipa in a zip file and the intoplist file is NOT THERE how to generate this?

  Any help here?

  the most recent is 16 +, Download Adobe AIR SDK

• Loading of local swf files with actionscript on air for iOS

  I apologize if this seems like it has already been asked, but I'm not sure that having understood the answer, not on the Adobe site, or elsehwere.

  I am developing an app for iOS, targeting the last 3.9 SDK

  I have a main swf file that loads the local swf files. These local swf files have code actionscript in them. I use Flash Professional CS6.

  I publish the application successfully and everything's fine. When I start the app on the iPad, is the main swf and all is well. When I click on the button that loads the local SWF files, nothing happens. They are not loaded.

  It seems that this has been answered, but I'm losing my mind. I don't know what the problem is. I know that, in version 3.9 Air, it is now possible to load local SWF files are actionscript.

  Air for the Android version works perfectly with these local files loaded and unloaded like a charm.

  Any help would be greatly appreciated

  from the air, 3.6, you can load swf with actionscript and that run actionscript.  before 3.6 air that was not allowed (without additional work).

  but your charger must provide a loadercontext object that uses the current applicationdomain:

  var lc:LoaderContext = new LoaderContext(false,ApplicationDomain.currentDomain,null);

  yourloader. Load (yourexternalswf.swf, LC);

• How to enable the sampler in telemetry at AIR for iOS settings options?

  Hello

  I try just to the new CC of Flash, and one very good feature is to monitor an iOS app using adobe scout.

  But when I export an app, in the AIR for iOS settings, I still see the option "Enable sampler" is disabled. How can I activate the option?

  Thank you.

  Hello

  To enable the option of the sampler, you need to put it in the publication settings dialog box. Open the settings dialog box post and select the option 'Enable detailed telemetry' under the section advanced for the Flash (.swf) option. Now, you will find the telemetry option to activate sampler activated in the AIR for iOS dialogue.

  Thank you and best regards,

  Roger Simon

  Adobe Flash Professional Team

• How do external swf garbage collector in the Air for iOS?

  My app uses a lot of external SWF (although they are actually included in the application with a file, but they are not shipped) and does not contain any bitmapdata, only of vector graphics. The problem I have is that they seem to never be garbage collected and System. privateMemory continues to increase while the application loads more SWFs.

  As sovereign wealth funds contain vector graphics, I cancel all just all the variables that are now the reference to the SWF file and call it system.GC()... But it doesn't seem to work. What should I do for the garbage collector to clean sovereign wealth funds?

  I use Air for iOS 3.5.0.1060 and ActionScript3.0.

  
  

  Ago - I found that they are not always collected garbage when you expect to be. It is not that they are "missed" just AIR decides to wait before waste collection. I found that continuous application to run they will eventually be garbage collected at the same time very unpredictable, as long as you don't have really any remaining reference for them.

• How to reduce the suttering in Air for iOS GPU mode?

  Currently, my game runs at 60 fps on iPad 2 and has no problem concerning the rendering speed, but I'm rather annoyed by a constant stutter that causes the game to stop for 0.1 to 0.5 sec from time to time. The stuttering behavior is similar to when the garbage man is run and I assumed this is casued in Exchange for GPU memory as my game uses a lot of bitmapdata.

  Problem is that my game goes one scene to another scene seamlessly without stopping animations in the game screen leaving old-fashioned scene slide off the screen and new stage sliding in. There is therefore not the time to preload/precache active graphics used in the new scene. After various scenes of transiting a few times, the game starts stuttering trying to show new images.

  My game works fine without stuttering on old PC but on iPad 2 is quite obvious. Could someone tell me some tips to reduce stuttering when using Air for iOS? In the game, all vector graphics are drawn pre bitmapdata (so no vector graphics are shown) and the size of the active graphics that each scene is approximately 2048 * 1024 pixels. There are about 10 scenes. In addition to this, there are ways to graph common interface that are used in every scene and the size is about 30 x 400 * 400 pixels.

  I know that the game uses a lot of graphics resources. What makes the game preloads the assets before transiting to a new scene will eliminate stutter but I want to see if I can keep the scene transition seamless on iOS again.

  I am currently using Air3.5 + Flash CS6.

  * I mean cached prior/preloading displaying actually (addChild and visible = true) on stage and make time for GPU cache. All the graphics data is already loaded.

  Have you tried playing with the StageQuality class? Setting to 'low' solved my problem of rotation and orientation screen bumpy...

• LOADING IN ONE air for iOS to the PROJECT WEB PAGE

  Hello!

  I have a complicated problem. I'm trying to find a solution in the world, but I have not found anything.

  I create a project Air for iOS with Flash CS5 and CS6 Flash. I need to find someone who knows how to download a web page within an application.

  I try to explain better. There is still a task for the download, html link, but it just works in a new browser window. That way, whenever I want to see a web page, the application will be close. Is it possible to import the entire web page inside Air for ios project and not in an external window?

  I wish that the result is like this:

  
  

  Thank you very much.

  
  

  When you change to another frame

  webView.stage = null;

  If you back up the first picture tho

  webView.stage = this.stage;

• Why Adobe stopped support in Air for iOS?

  Adobe said today that it stop developing for iOS.

  That is to say that it will NOT update LOOK for more recent iOS iOS (as iOS 5).

  I paid a lot of money for the license of Flash and member of the AppStore!

  What could do now?
  

  What we talked about today is the development of Flash Player for mobile browsers, which will end after the next version is released. iOS is not affected by this, because the Flash does not work in Safari on iOS in any case.

  Adobe spoke of how they were going to do more with mobile AIR apps, so if something ads today is good news for AIR for iOS.

• Loading the SWF in the AIR for iOS

  Hello

  I'm working on a project in the AIR for iOS.  It's great that we, flash developers are now able to compile our code actionscript for iOS.

  The project that I am working on is divided into different SWF files.  There is a main SWF file that loads the others if necessary.

  Now I can't get a working swf file loading.  The only thing I see is the background of the child being displayed, but then the program freezes and no child actionscript code is exectuted.

  Children SWFs are loaded with a simple charger:

  var loader: Loader = new Loader();

  childLayer.addChild (loader);

  var url: URLRequest = new URLRequest ("child.swf");

  loader.load (url);

  When I post the main swf file I include children swf files in the package.

  Is it really possible to use several swf in your iOS projects?
  And what are the limits for this?

  Thank you.

  greeting,

  Bert

  Yes, it is possible to include any swf in your main application, but your external swf should not contain action script code. Just you can have graphics, symbols, textfield etc on the timeline, but with no timeline script.

• Maximum file size for Adobe air for iOS and Androind update apps

  Hi all

  I'm working on a project that has a few videos I need to group in my mobile application for an Ipad app that I created using Adobe Air for iOS. My question is simple there at - it a maximum file size limit on applications compiled using Adobe air for iOS? And if yes what is it? Any help would be great.

  best regards Mike

  It is not a limit.

• Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall

  Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall, waiting for quick reply

  Hi cmscan,

  Thank you for using communities of Apple Support.

  I see that you add a VPN connection using IKEv2, but you do not have the remote ID. I know it's important to be able to set up a virtual private network, you can connect using your iPhone. I'm happy to help you with this.

  You must contact your system administrator to ensure that the settings that you must configure the VPN connection. Please see the iPhone user Guide for more information.

  Have a great day!

• Unable to connect to the Simulator for debugging

  For some reason I can't connect to my Simulator debug. I can run my project, but when the debugging console says "pending connection on port 5768" and never makes a connection. I have tried to resolve this but couldn't find an answer

  I looked at the documentation for the developer, but he said nothing about it.

  It's very strange. Just out of curiosity, trying to put development power off mode, then running, but this time choose a different IP address. Then add back to Momentics and try to run again.