connection to IPS with ASDM

Similar Questions

• I can't discover a device ips with the CSM, the connectivity test failed!

  Hello world

  As I say I IC discovering my unit IPS with CSM, I have this message:

  The connectivity test failed. Elapsed time: 0 seconds. Expired certificate expiry of the certificate by the device. Certificate of details he received the device: [[Version: V1 subject: CN = X.X.X.X, OR is SSM-IPS10, O is "Cisco Systems, Inc.", C = us Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 key: public module of 1024 bits Sun RSA key:]]

  163313595958527341944117022920288114482504180720578005561064955313643774990976715676633248342066152083691325258722628818351428036183713571418359362172457378662626088225882179602799780417125413462000959388084832050518999958663965078068279649170934515615745020420256153072567949117948346991874191887565159544369

  [public exponent: 65537 validity: [from: Tue Dec 07 10:42:59 THIS 2010, to: Fri Dec 07 10:42:59 HEC 2012] issuer: CN = X.X.X.X, OR is SSM-IPS10, O is "Cisco Systems, Inc.", C = SerialNumber us: [-XXXXXXX]] algorithm: [SHA1withRSA] Signature: 0000: E1 DF 3 a 84 EF E5 C8 F5 F8 EB D1 BA C8 55 54 61:... a... T.. U 0010: F8 E4 54 28 0F 0F DB F8 DB CA 0A 5F 63 B0 0E 0C. T. (..... _c 0020: 4 a 28 46 9th D0 B7 B9 F1 A7 B7 35 95 2 CA EB FD J (F...) 5,... 0030:03 32 D1 1A 13 DB B3 9B C9 E2 E6 22 04 D1 84 3 B. 2... ». ;.. 0040:4 4TH BD D2 E0 25 27 46 5F 1 D ED 39 EC 8F 38 BD MN...%'F_... 9.8 0050: BE ED E8 7 02 AE 62 92 89 66 86 BB B4 B6 FD 1F... b... f... 0060:6 46 27 2 4 b EF F8 C9 1F 81 29 82 C1 AB lF 5F 4F,'K... O..._)... 0070:06 33 0D EA THIS 3F 85 CC 2F 82 6 B 8 90 AND 8 B.3 D8 D6...? ... /...k... ] Please synchronize the time settings on the device and the server of the Security Manager and the time-out value of the certificate, and then generate a new certificate.

  I already generate a new key rsa on the ASA FW IOS version 8.4, my connection is ok and my password. I discovered the FW ASA successfully but not IPS module.

  worm CSM 4.3.0 service pack2

  Thank you for your help.

  This is a common problem with IPS and is easily fixed.

  The IPS uses a self-signed certificate for the protection of its channels of management TLS (Transport Layer Security). When an IPS is initialized who signed a certificate is valid for two years. This certificate is separate from the ASA RSA key.

  To regenerate, please see the procedure described here.

  Do not forget to rate helpful answers and mark your question as answered when solved.

• Strange problem with ASDM

  Hi, today we had a strange problem with one of our 5550. I worked through ASDM on it and all of a sudden I couldn't connect via asdm on the interface of management or inside interface. Nothing helps.

  When I connected with a vpn, then use asdm, it works. My ip on the network when it did not work was 1xx.xxx.81.235. When I use the vpn is a 1xx.xxx.55.1 from a different ip address. I can build a connection on the inside interface with asdm (with vpn).

  I tried closed and without stop the interface of man, that does not.

  It may be that the things asa, I am an intruder and dynamically blocks my netwerk range? If yes where can I find this info.

  Other users of our team had the same problem.

  I also checked the syslog nothing.

  THX,

  Marc

  Although I've ever experienced this myself, but if the running-config has not changed and worked before its possible that the ASA

  may have shunned your connection?

  To the CLI:

  # sh shun

  look if your IP address is present, if any make:

  # claire shun

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/protect.html#wp1058270

  More than likely it is do to a change to the running configuration, I would start by looking at a previously working with the gift of running-config running-config.

• Can I connect my iWatch with my iPad?

  Can I connect my iWatch with my iPad?

  N ° Apple Watch can only be paired to an iPhone 5 or above.

  iPads are not supported.

  Apple Watch - technical specifications

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• Can connect to Skype with a single account, but not with the other

  I am able to connect to Skype with my own login but not with the credentials of my friend on his pc. I can however connect with her details as well as mine on my pc?

  You need to upgrade your Internet Explorer to the latest version of IE8 for Windows XP.

  http://filehippo.com/download_internet_explorer_xp/

• Satellite L20-101: could not connect my TV with the svhs

  Hi guys,.

  I have a problem.
  I have a L20 - 101 and I can't connect my tv with my toshiba svhs output.
  I reinstalled the drivers for the motherboard and videography, what can I try?
  Thank you

  Okay, it looks like a really not nice problem.

  So, how do you try to switch to the TV? You have the possibility in your display properties, but not the machine * recognize * the TV? You also have the FN + F5 key combination to change the display, have you already tried?

  And regarding your display drivers (including vga you? nvidia or ati?)

  You can take a look here to find the latest drivers to work for mobile platforms:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Good luck buddy

• Securing internet connection Wi - Fi with Equium L10 and Belkin router

  Hello

  I installed a wireless belkin router on my laptop L10 and have an excellent connection to the internet - everything works fine. However, I would like to secure the connection to prevent indiscreet listening - I tried to do this under the encryption and authentication of the menus, but I'm not sure about the different acronyms used - eg Shared, WEP and WPA for example.

  I tried different combinations of these, but the laptop disconnects just from the router until I return to the connection 'open' standard with encryption disabled. Can someone point me in the right direction... ??

  Hello Dan

  Your router is unknown to me, but encryption is still working on the same path. Check the security settings of your router, then select security options. Set the encryption you want to use (WEP) and the password.
  Your device must be configured as described on this page
  http://LSS.wisc.edu/~Sara/wireless/pcwepconfig.htm

  If everything is done on the right track to avoid any problems. I also use WIFI at home with 64-bit encryption, and I spent 10 minutes for any configuration.

• After factory reset, I can not connect my iphone6 with itunes

  After factory reset, I can not connect my iphone6 with itunes

  What happens when you try? You get errors? -AJ

• Cannot connect to itunes connect comes up with your ID apple is not enabled for itunes connect (2002)

  Cannot connect to itunes connect comes up with your ID Apple is not enabled for itunes Connect (2002)

  What did you do

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• 485 4 son of connection 2-wire with PCIe-8431

  I am trying to connect a temperature with my PCIe 8431 watlow controller.  When I plugged the cable I have shorted out Tx + Rx + (p 4.8) and Tx - Rx-(P5, 9) to connect to the controller.  I guess it's the conversion of 4-wire 2-wire, but when you look at the "loop back" connections of NOR, exactly what they tell you to do.  I ask because I'm not sure and I'm not able to establish communication with the controller.

  Have you seen this - http://digital.ni.com/public.nsf/allkb/3EB322DAEAACB19D862571F500021C00

• How to connect 2 PC with CPL blocks on windows?

  How to connect 2 PC with CPL blocks on windows?

  original title: CPL problem
  Hello
  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• I can't connect to wifi with router WRT54G2 v1 with Windows 7

  Hi everyone: I have a Linksys WRT54G2 V1 and since I bought my new laptop with Windows 7 I can't access wifi.

  I have another laptop computers equipped with Windows Vista and a PC with Windows XP that connect perfectly, but with Windows 7 gives me error when loading of the password.

  I update the firmware to version 1.0.04)is (present the latest version I found on the site of cisco), but still does not work.

  I have try the cat with the help of Cisco and told me that he was no longer under warranty...

  Can you tell me how to solve this problem?

  Thank you very much for your help!

  Of course, disable the security on the router completely for now.  Now try to connect without security.  Once completed and verified go back and add the security on of WPA2-AES with a new password and try again.