Connection to the 4G hotspot for cell phone WUMC710?

Similar Questions

• Satellite A100: How to use the IrDA port with cell phone?

  I have a laptop with an infrared port that I can use with another computer.
  Now, I have a problem with my laptop at home, A100 series.
  I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
  If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.

  I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
  What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?

  Thank you
  Petri

  Don't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
  What cell phone do you have exactly? Satellite A100-xxx

  IrDA option appears in the control panel?

• Where can I buy a usb key with thin cable for A500 for cell phone charger?

  Where can I buy a usb key with thin cable for A500 for cell phone charger? Or I can do?  Thanks for any help.

  The A500 uses 12VDC to load. USB use 5VDC. You could do a cable, but it wouldn't work because of differences in voltage. Sorry...

• Outlook Express 6: your server has unexpectedly ended the connection. The potential causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800ccc0f

  Original title: Windows XP and Outlook Express 6

  I have a new computer with outlook express and went through the set up instructions.  When I tried to send a test email, I got this error message:

  "Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »

  How can I fix this error message and have e-mail sent via Outlook?

  Hi Jeanette Logan,
   
  Here is an article that addresses this issue. Follow the steps listed in the article for this problem:
   
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  t-4-2

• BlackBerry Smartphones trying to connect with the desktop software for my blackberry

  Hey, M trying to connect with the desktop software for my blackberry torch 9800 and it asks password for the connection. I am using same unlock password I use for my bb but for desktop sofware it shows incorrect... pls help!

  Make sure that you type on your BB, it's what you type in DM. don't forget that the keyboard on your BB is different from the keyboard on your PC. Some people think they are type numbers on their BlackBerry when they are really typing the letters. For example, to use numbers on a BB you must hold the ALT for each button, you push so you have to hold the alt key while typing 1 2 3 4. If you hold down the ALT key on the BB you would really be typed all W E R S. sometimes, people will hit the ALT key once (and not hold the button) before they enter the password and then you get 1 E R S.

  Who is? Make sure that you do not mix numbers and letters.

• Windows Live Mail send any emails. "Your server has terminated suddenly the connection. The possible causes for this include server problems. »

  original title: live mail not sending

  My windows live mail 7 stopped sending a reason any.  It has worked very well.  It receives mail ok.

  Whenever I try to send an email I get the following error

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Topic 'task on cognition.
  Server: 'smtp.tiscali.co.uk '.
  Windows Live Mail error ID: 0x800CCC0F
  Protocol: SMTP
  Port: 25
  Secure (SSL): No.

  Any help appreciated.

  It can be something as simple as turning off email in your anti-virus program that is unnecessary and can cause this. However, if it does not, ask the experts in this forum. Here, few people use this e-mail program.

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

• Exchange server and Surface RT, can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Hello

  Our company uses an Exchange Server for email, contacts and calendar.

  Can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

  Kind regards

  Matej

  You must install the SSL certificate before connect you to the Regional service, the easiest way is to go to "desktop" IE10 open, go to the exchange server web access page, click on the notification of "certificate error" red and view / install the store "certificate authorities roots of trust." Then, make sure that your surface RT complies with the minimum requirements of security then connect to the exchange via the mail application server.

• change the line style for cell None

  Hi expert,

  How to change the line style for cell to zero.

  Respect of

  John

  my_cell.topEdgeStrokeColor = app.activeDocument.swatches.item("None");
  my_cell.leftEdgeStrokeColor = app.activeDocument.swatches.item("None");
  my_cell.bottomEdgeStrokeColor = app.activeDocument.swatches.item("None");
  my_cell.rightEdgeStrokeColor = app.activeDocument.swatches.item("None");
  

  Do not test, but should work.

• Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I get the following error when I connect to my via Vsphere Vcenter and try to connect to one of my server with the console:

  Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

  I'm new to VMware, I can very well do a MSTSC server and work proberly.

  the VMwareTools are out of date, when I log on the server and try to update I get the following message:

  

  any ideas here?

  I discovered that it is related to DNS

  WSATRY_AGAIN

  11002 (0x2afa)

  It is usually a temporary error during hostname resolution and means that the local server does not valuationauront of response from an authoritative server.

  the issue was that the VMware system was on a different subnet, and the firewall (TMG) blocked. bring the RDP to the Vcenter server and vsphere then open works like a charm

• Cannot connect to Windows Live with my cell phone number.

  When asked for my Mob. N ° is * deleted * and I said this is not my area. I live in the United Kingdom, Northern Ireland and this IS my cell phone number

  I have tried to connect to Windows Live and gave my Mobile as additional security and being told that this is not my area. Stupid is that?

  I tried to connect to Windows Live

  This question should be posted in this forum at the Windows Live Solution Center. Until you do, visit your page Overview of the account and that you gave the good countries and time zones in your profile.

  Noel

• Skype4com for cell phone

  How can I develop a package similar to skype4com that runs on an Android cell phone.

  I joined the beta skypekit project, but I like to keep the gui Skype and a rewrite not of myself.

  Is there a simple way to do this?

  Thank you

  You are welcome.

  Please copy / paste the link below into the window of the browser of your choice:

  DevForum. Skype.com

  Select the area of the FAQ and then click the new post button.

  About me You can also use an IP camera that your camera for Skype videoExample Instructions

• QX10: Connect with the Nokia Lumia 920 (Windows Phone)

  Hello

  I know there are apps for Windows Phone which should be compatible with my Sony QX10, such as: http://www.windowsphone.com/en-us/store/app/scrap/896b0e1b-2c1a-40e4-9c55-09050e3860dc

  But when I try to connect to the camera via Wi - Fi, it failed with an error "Incorrect password." I also tried it with other devices (Android), and the phone connects as it should. No matter how many times I try, it holds just failing in combination with my 920 Lumia.

  Anyone have any ideas on how to solve this problem?

  Thank you!

  Problem is solved with the last update of Windows Phone!

• I can't activate it.  Acrobat is not to connect to the internet at work, and phone numbers of Adobe are disconnected

  I bought Acrobat and when I finished installing, it could not connect to the internet to activate properly.  I contacted my computer at work and it showed no problems with the firewall (which took us down to the installation) or our network.

  I also tried to use the phone activation, but the 2 numbers that the software provides are disconnected or simply false.  I thought they might be outdated, so I checked on the Adobe site.  1-866-772-3623 does NOT work when you dial the number.  I tried several times a day for more than a week.  The number of other (1-206-675-6222) is not even a job number.  What am I supposed to do?

  I have the serial number and the number of Activation and the Activation Type.  But I can not activate the software without the authorization Code.  Can someone help me with this realization that I made any good up to this point?  Is there a more current phone number to try to reach the hotline for phone activation Adobe?

  -Paul

  unless you have acrobat 7 or more, check your hosts file.

  for assistance only and other common problems, sign activation, or connection errors. CS5.5 and later, Acrobat DC

  If you have an older version, the activation servers are closed.  What's this (v. 7) the problem?

• Connection to the Essbase basis for financial reporting

  I have a report with an Essbase database connection HFR. In my ranks is the cost center dimension, and I used the IDESC relationship at the top level combined with the deletion on lack of blocks and missing data. When a user tries to back up the report, repression does not work and for each displayed cost center a long random number appears as a value despite not having user does not have access to these cost centers. The same long string appears (e.g. 179,769,313,486,231,550,000,000,000,000...) for each cost center that the user doesn't have access to.
  
  However, when I change the connection to the database of planning, repression works. The problem is that I have to connect to Essbase instead of planning, as I have dimensions of attribute I want to include in the report.
  
  Can someone explain why this happens when you create a connection to Essbase db?

  Looks like the same bug I've seen in the past-

  9070412 if no filter access is enabled in Essbase, when you select a member to which the user has no access, a long series of numbers appears instead of #MISSING in the cells of data in the report financial information in HTML or PDF format found in the workspace.

  Fixed in version 11.1.1.3.24

  See you soon

  John
  http://John-Goodwin.blogspot.com/