Connection USB Hub with Multiple Hard Drives Wi - Fi router

Similar Questions

• Discover the usb hub and my hard drive speed.

  I would like to ask in this forum. I have a Seagate 1 TB external hard drive backup more USB 3.0. First when I bought the transfer speed still very well and I don't worry. After a few months, my data put in also increased as much time to something else as long as it is important to keep. The problem is that my hard drive now transfer data as slow as a snail. There just get 1 Mbps of transfer speed (only in my laptop, in all the hub in my laptop). When I plug it into another computer, it's fine running at 20 and 40 MB/s as normally as USB 2.0 wired hub. Another hard drive that plugged into my laptop works very well, so I guess that only my hard drive is never play well with my laptop, so that they begin to work ppliquee. I searched many tutorials that help me to solve the problem, but no one worked for me.

  Is it possible to solve my problem as something to change or update?

  I can't blame time my hard drive or my laptop because they are good, but if they linked together they do not work normally.
  I hope that all who read this can make suggestion or give a way to solve it. Thank you very much...

  Problem is a little Tricky and make me confusion

  However try to reinstall the USB 3.0 hub and USB drivers

  As you said the other disk HARD running at good speed, then the problem with your HARD disk and your computer

  Try the HDD running Test by downloading HDTUNE PRO and check the report of HDD health

• Fantom II of GreenDrive USB 1 TB external hard drive eSATA drives does not appear

  Player installs but does not appear in the player list and cannot be accessed.

  Hello

  1. were you able to connect the front USB hard drive?

  2 have you made any changes to the computer before the show?

  You can try to connect any other USB device to the computer and check if you are able to access it or not.

  You can also try to connect this Fantom Drives Green Drive II ESATA USB 1 TB external hard drive to another Windows XP computer and check if the problem is with the drive hard or computer.

  You can run the fix it or follow the manual for troubleshooting steps described in the link below to fix the problem.

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• New external USB 500 GB Portable Hard Drive appearing is not in Windows Vista

  I connected a new 500G portable hard drive to a front USB port on my HP PC (with an AMD Phenom X 4 image processor), under Windows Vista Home Premium. Windows presented a pop saying that the driver has been installed, then he said: USB device installed. The software of the device has been installed successfully and is ready for use.

  However when I looked for the drive in Windows Explorer it wasn't there. I read in this forum, and using the information that I realized that I accessed the computer on my PC management - up it only shows C: drive and D: drive image factory, but below that, when disk 0 is assigned to the C: and D: drives it shows disk 1, unknown, uninitialized. Assuming that it is the car in question, I tried to initialize the disk, but then the error FUNCTION INCORRECTE.

  I don't know what to do at this point. If the player has not been assigned a letter, there seems to be no way to transfer or partition.

  A new drive must be formatted. That is why it is sjowing up as disc 1, unknown, uninitialized.

• How do I set up a dual boot Vista and XP with 2 hard drives?

  Dual boot Vista and XP with 2 hard drives

  I tried to get my computer has a separate hard drive put in place that lets me run Windows XP or Windows Vista. I tried the path of the CMD, but I could do things wrong with that because the news NTLDR appeared much too different info from Vista. Currently, I have deleted this change to the startup configuration. I want to know what I have to do to get these two to be able to boot. I noticed problems similar to mine, but the answer always seems to be a software that would cost me money.

  Thank you

  Tevans95

  Hello Tevans95,

  You cannot install two different operating systems on two different disks. For a dual-boot environment, you must install both XP and Vista on the same drive with different partitions.

  In addition, you must install Windows XP first and then Windows Vista.

  You can check the items below which will give you information on Dual boot.

  Install multiple operating systems (multiboot)

  Set up a dual-boot system

  Change the default operating system for startup (multiboot)

  There is no software that can help you to install XP and Vista on different drives.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Problem with connector hard drive to spring on T43 motherboard

  My T43 (type 1875) cannot operator unless I am pressing on toward the down on the palm rest above the spring certainly drive connector.  This connector seems to be designed to move upwards & downwards on two positions.  44 pin hard drive seem to connect indirectly to the motherboard via 44 springs in this assembly.  This Assembly should be compressed manually for the system to communicate with the hard drive.

  I do not understand the physical design of this connection?  I certainly do not understand the purpose of this complicated mechanism.  It is part of the protection of the hard drive?

  To correct the problem, I see two possible solutions;  either compress the springs, then bend the stems of alignment to maintain the State of compression, which makes electrical connections or replace the motherboard.

  If someone put me on how I could fix this?

  -Michael Faklis

  Note of the moderator; email address removed before finding too much spam

  This is common with the T4x problems and those who have not been carefully reassembled since the Council can become cracked over time especially when door one-handed from a corner as a person would natrually.

  Even models 15 inches and their solid upper bezel can experiencine this issue, but the models 14 inches and the palm rest of split and are the most sensitive.

  The system works when you press the right ALT just below and to the right of the trackpad?

  If you took the palm rest off the power, then press the plug of the battery, it restores the operating system?

  If so, you may be lucky that the Council itself cannot be cracked but it could be the connectors of taking battery BIOS on the Board and in this regard a $3 repair. Cut the connector and replace with a new one or cut and reweld to ensure that the circuit is solid.

  If it is cracked, you can hold with some high quality neoprene since used neoprene "shrink as styrofoam when exposed to heat and pressure. Shim planks will run, but the added stress of ttignehtning it back together can create other pauses as you are bowing the bridge so that the stress has to go somewhere.

  In addition, the system will work better if it remains stationery for a portable shim will pass when the goods are shipped under nomral conditons.

  Finally, the entire system will be brick and you can save or part the rest of it.

• Raid PowerEdge r.620 with single hard drive controller

  Hi all

  I have Dell PowerEdge r.620 with 1 * 1 TB hard drive, Raid Controller using mini H710... When I try to install Win Server 2008/R2 x 64 the HDD is not detecting, I've read in this forum of the disc cause hard does not detect is pilot raid is not installed, but I don't have that single hard drive is possible to set up raid with single hard drive or I don't have to use raid controller but I still don't understand how to set up the server with no raid...

  Thank you...

  Dimm21

  Sorry for the late reply, do you mean raid controller in the server? If you want to say, I always do not install driver coz is new server than i've got...

  I want to know, if posibble install raid on one hard drive and how to configure who... Server raid controller is mini H710

  Thanks for your response

  Yes, the RAID controller.  One you have?  I'll assume a PERC H710 for now:

  The H710 PERC is NOT compatible non-RAID (you cannot use a single disk without RAID)... in order to use a hard drive, you MUST configure a single drive RAID 0.  This must be done in the RAID controller BIOS utility, accessed by pressing CTRL-R during POST when prompted.

  Once configured, you need TO load the driver for the operating system, see the drives connected to the controller.

  If you have a H310, it SUPPORTS no RAID, so you do not have to configure anything in the RAID controller BIOS, HOWEVER, you MUST always load the RAID controller driver during installation.

• Cloning a virtual machine with 2 hard drives!

  Hi all!

  I ran into a very annoying problem. I'm trying to Migrate/convert virtual machines to a host in the CR. Each virtual machine has 2 hard drives which are located on 2 different data stores. When I try to migrate or to clone virtual machines from the host on my Cluster I get an 'error of operation period.

  After scratching my head for a while, I discovered why. The virtual machine have 2 hard drives on 2 different data stores. Both flat.vmdk files are called eponymous because they are on different data warehouses (TTDC001.vmdk). I created a VM test on the cluster with 2 hard drives and flat.vmdk flies are named TTDC001.vmdk and TTDC001_1.vmdk.

  So my conclusion as to why I get "Opération Timeout Error" is that VC trying Migrate/Clone to the virtual machine but is mistake because his attempts to migrate/Clone 2 hard files with the same name!

  Can someone give me some pointers as to how I can get around this? I am currently copy the file hard 2nd to my deskop from the data store and rename it then copy him on the new cluster data store to see if it works as you cannot rename the file hard in the data store. It just seems long way round to migrate virtual machines with 2 hard drives, and I don't even know if it works!

  Please help!  :|

  Andy Hughes

  Andy of the evening,

  I do it well. Thank you for asking.

  So if I'm reading correctly it seems that you are trying to clone a virtual machine from a stand-alone host to a host that is part of a VMware Cluster. When you do this you get a network midway through the copy error. Is this correct?

  Can you confirm how fast is connected to the Service Console between the two servers? For this kind of work I would recommend making them run at 1000/full, assuming you're not already. Could you also post the entire message that you get when the clone fails.

  Kind regards

  Glen

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I want to USB Hub with sync Ipad pro please suggest compitable for this device

  I want to buy power USB Hub with Sync to IPad Pro please suggest me the device appropriate for this work

  A powered hub will do, choose one.

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• A40: problems, I think that with a hard drive

  Hello! Bit of background - had a laptop Toshiba SA40 ISI during a little less of 2 years, and there have been some major problem with it in these last days (until then it had been beautiful and functional with brio).

  He started working yesterday incredibly slowly, took forever to load, kept on crashing etc. After the restart for the 5th time, it would have just send me to the "Windows didn't load correctly screen ' and ask me to select an option, and whatever that I did sent me to the toshiba load screen, Windows does not at all.

  So I had use the product recovery disks and reformat the hard disk. For half a day, the laptop was working once again excellent, no problem. Then this morning, out of nowhere, it completely crashed again. I rebooted, and again the same problems appear. But now I can't used the product to reformat recovery disks. A few times he reformatted then the screen became all black. The error messages became more in worst - now, when I'm trying to recover, comes up with an error message:

  GDISK (e) cannot write to sector 0 of the fixed disk 1 - the IDE controller error

  F0ollowed by a little more information, I have not a chance to note that the screen then recovering flashed, then the screen says:

  !!!!!!!!!! Error!

  Then a screen that says:

  DAY 02/05/06
  Error No.: 11030
  Message: Invalid destination drive

  He has gradually deteriorated. I think there is a problem with the hard drive, the previous messages referred to make it incapable of partition. It is quite anmnoying as it came straight from heaven. Everyone has experienced or heard of something like that? Anyone know what is the problem or what to do? How do you think it will cost you for difficulty? I don't know if it is covered by the warranty, or if this series comes with 2 year warranty.

  Any help would be much appreciated

  Russell

  Hello

  If the warranty is valid, then all replacements will be done free of charge. If you are not 100% sure so call the Toshiba service in your country. Please note; If you open the notebook (remove covers) by yourself if you will lose the warranty.

• Satellite A20-S103 - crackling noise with new HARD drive

  Hello together

  I upgraded my laptop A20-S103 with a hard drive Western Digital WD2500BEVE 250 GB running under Windows XP Pro.
  Since then, I have problems with the sound and the movement of the mouse when the CPU usage is high.

  Up to 50% of its use, works well but before I crack and mouse sticks and made jumping movements.
  The BIOS and drivers are updated to the latest versions of Toshiba online.
  After awhile and a lot of research, I got also the HDD running in DMA mode with the IDE4008.exe ALI tool isn't that hard drive is running in PIO mode.

  In addition, I think that the speed of the hard drive is low when the CPU usage is high.

  Please also read http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=89990𕾆 that is showing that I'm not the only one with this problem.

  Anyone know a solution?

  I agree with Akuma. You should try to update the BIOS and drivers from the chipset and see if it works or not.
  It's worth to try ;)

  The two you can find here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Y480 - laptop does not start with attached hard drive enclosure.

  My laptop started clicking and will boot LAN, so I opened it and looked at the hard drive. All seemed well, it wouldn't be fair to start. Then I removed the metal casing around it and stuck the drive in. Everything started normally. Chkdsk shows nothing wrong with the hard drive, and I'm not sure why remove the dressing would affect startup. All the thoughts/solutions?

  Blue... temporarily parts of the sponge to keep the HARD drive in place.

  and if your Y480 is still under warranty, can consult a Support technique Lenovo...

  http://support.Lenovo.com/en_US/feedback/detail.page?LegacyDocID=MIGR-76613

  Good luck... Zehn

• Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Iso file of windows xp can directly be installed USB on a formatted hard drive?

  Not directly.

  There is a SMALL chance that if your hardware supports it (unfortunately never say you anything on your PC or BIOS), you can boot from a USB stick or an optical drive and install Windows XP like this.
  But it is unlikely.
  In addition, tell us what you mean by 'windows xp iso file. This is very vague, and we do not know what you are talking about.
  Finally, if you want to ask questions here, really read the answers and recognize them in some way. Here is a link to your other thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/which-software-should-i-use-to-burn-Windows-XP-ISO/ffd9ccb8-0248-4e1f-afd3-6ce14802348a