I want to USB Hub with sync Ipad pro please suggest compitable for this device

Similar Questions

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• How can I use a flash drive with my ipad pro

  I want to buy an ipad pro for school, but I will need an adapter to plug in my flash drive. I was wondering if I would be able to buy an adapter that I can use for a flash drive.

  You can buy a control usb3 adapter, but can connect a USB fat32 and you can import photos because there is no file browser.  Flash player cannot be connected or sick... instead of you can only buy western digital my passport wireless hard drive to keep your files and my cloud app works very well with the ipad pro

• Sync iPad pro

  Why did I get this message when syncing iPad pro (2016)

  

  GH

  With your iPad still connected to your computer, close and restart iTunes on the computer.

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  (It sleeps)

• Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

• USB-TC01 gives error-201165 "firmware for this device is too recent.

  Not sure where else to this post, but the USB-TC01 DAQmx uses, so maybe someone recognizes this.

  I plug it to the USB port and it lists very well.  It runs the application very well canned.

  But when I try to take data under DAQmx 9.1.5 I get this curious message, as well as boards "Downgrade of firmware for this device" I don't want to do that.

  EDIT: I see that the firmware of the device is 1.1.0f 1

  The specifications of the USB-TC01 don't say what version of DAQmx is necessary, although 9.1.1 supports the device.

  I tried on XP and Win7 with the same result.

  TIA

  Ed K

  I guess that "ancient" is relative.  Budget and LV9 story of me and I have to stay on the DAQmx version.  But NEITHER finally took me in his Web and it's time for an upgrade.  A trial version of new LV and 9.9 DAQmx solved, of course.  I just wish that error message had been less weird.  At least, it is here for someone else could find an answer, no matter how obvious.

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Kindle Fire PC USB connectivity, the drivers for this device are not installed. (Code 28).

  I connect and transfer content from my computer to my Kindle all the time, but today when I plugged the Kindle my pc tells me that the device needed troubleshooting.  After you run the troubleshooter, I gives me this message:

  "The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  This has never happened before, and, no, I have not recently downloaded new applications, programs, updates or had a system crash. It was, as usual, a few things. Where it says "to find a driver for this device, click Update driver" which is non-interactive. I can see it, but you can't click on it. That's happened? What should I do?

  Scott.

  Hello Scott,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because the parameters or corrupt device drivers.

  I suggest you run this Microsoft fixit and check if it helps.
  Reference:
  Hardware devices do not work or are not detected in Windows
  https://support.Microsoft.com/en-us/mats/hardware_device_problems

  Automatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

  Please also try to update the device drivers by using the steps described in this article and check.
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

  Original title: open usb drivers problem

  My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
  I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
  In the Properties window, I get the following message:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  I don't remember making any hardware/software changes and do not know how to solve the problem.

  You are welcome.

  Something seems not quite right so contact the store can be a good idea.

  Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

• Standard Enhanced PCI to USB Host Controller: a driver (service) for this device has been disabled. Another driver can provide this functionality. (Code 32)

  How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. "  Another driver can provide this functionality. (Code 32). »

  I hv tried to uninstall, shutdown, then reinstall and also put to day, but all to no avail.

  Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• NVIDIA GeForce 8400M GT: the driver is installed for this device is not compatible with Windows 7 (from Vista 32-bit)

  Hi all, I am interested in my Sony Vaio AR41L (under Vista 32 bit SP2) upgrade to Windows 7, but when I run the Windows 7 Upgrade Advisor, it tells me that, for the graphics card, NVIDIA GeForce 8400 M GT, the driver "installed for this device is not compatible with Windows 7.

  Apparently, NVIDIA is not a solution and sent people to Sony, and Sony say that they have not updated the drivers for Windows 7 and that we do not know when they expect to do...

  All known and solved this problem?  Any suggestions would be very helpful!

  Thanks in advance.

  someone noted that nVidia will come out a new batch of pilots in the coming days. (once a month)

  It may be desirable to wait outside and continue with VGA Standard at the moment. Help others, tell us which solves your problem. Click useful Vote for those who help.

• I have a new computer and I want to transfer my pro first to adobe for this new account.  How do I do that?

  I have a new computer and I want to transfer my pro first to adobe for this new account.  How do I do that?

  Hello

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Once the desktop application CC on the machine, you can install the application from there.

  In the case of another version, please specify.

  Kind regards

  Sheena