Consecutive to the Documetns (Action) new numbering

Similar Questions

• I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  I CS5.5 Master Collection and you want to transfer to a new laptop.  The CS5.5 was an update for CS3 Design standard and I have all the disks and serial numbers.  I just uninstall both programs a laptop and install them on the other?

  You can do it, but you don't have to install cs3 in order to install your upgrade of cs5.5.

  You can launch the installation of cs5.5 and you will be asked your cs5.5 serial number.  Setup will ask you then select the product (in a drop-down list) calling.  Select cs3 and you will be prompted for the serial number for cs3.

  Enter the correct number at the right time and to proceed with the installation.

  If you no longer need these programs on your old laptop, disable (help > deactivate) before uninstalling so that you can keep your two activations.

• Please help me improve the automator action

  Hello to everyone.

  I did an automator action to create a new note

  the term {parameters}

  text referred to the value of the noteName (display dialog "Make a Note" with response default icon 1 "")

  Tell application "Notes".

  Set thisAccountName to "iCloud.

  Note the new to the file 'Notes' of thisAccountName account with properties {name: noteName}

  tell the end

  Back entrance

  end of race

  It works like this

  Now, I would like to improve it in this way:

  -do a wider window for text entry can see all of the text, not just a few words in one line

  -use a default account for a new note

  -use a paperweight as a default text

  do a wider window for text entry can see all of the text, not just a few words in one line

  You have almost no control over layout "display dialog". Your options are:

  (1) use the Automator action "Ask for Text", which performs a function similar but with a larger text box.

  2) switch to another system than Automator (for example AppleScriptObjC) that gives you a user interface controls complete, so that you can design your own dialog box

  (3) hack entry display dialog box to force a multiline input field:

  the value the noteName to text returned of (display dialog "Make a Note" with default icon answer 1")

  ")

  Providing the default answer which is several lines (empty), the dialog box expands to show this. It is not perfect, but the work effort is virtually 0.

  -use a default account for a new note

  I don't understand what you mean here by "default account".

  -use a paperweight as a default text

  Just:

  the value the noteName to text returned of (display dialog "Make a Note" with default icon response 1 (get the Clipboard as text))

• New numbers & not very good with xl be

  Hi numbers group

  I'm new numbers but persevering.  I save a fairly long list of data and want the names of line to remain at the top of the screen when I have scroll - how to do this please

  Kind regards

  Bob

  

• El Capitan - mail rules > ' perform the following Actions: "menu drop-down is hidden.

  Here's the problem: after setting up the mail in El Capitan and synchronization iCloud with mail rules (the rules are still intact), I noticed a strange thing trying to adjust my Mail rules to filter emails with a few new subfolders. Rules are still in place and function (i.e. ' if one of the following conditions is met:' of > Contains > E-mail address > (+ other rules), then, "perform the following actions:' such as moving, e-mail message, icon bounce, etc."), but the top drop-down selector below him "perform the following...". "section, which in my case is generally" move message to: (name of the folder here) ", is hidden from view. It's still there, but I can't physically click top because the table/cell/div that contains this selector is compressed or not large enough to display the menu drop down. I know that this is true is because the other rules that make them several "Perform" actions... ' display the actions of second and third, but are hidden one.

  This is a problem because if I add another "' move to ' action, it is in conflict with the first... but I can't delete the first action, because I can't click on it."

  I realize that it is a strange... Anyone have any suggestions on how to fix this?

  Thank you

  Shane

  You may need to scroll down to see all the criteria and actions in a rule.

• Lost mail rules section "perform the following actions.

  Hi-

  Install a new version of El Capitan (10.11.2). Set up Mail for the first time. Adding rules to specific e-mail to selected mailboxes. The more rules, I added more I noticed that the section "Perform the following actions" became smaller until this article is no longer usable (see photo). Any ideas what can be done? Is this a bug?

  Thank you!

  -Dave

  

  Please take these steps to remove the mail folders 'sandbox '.

  Step 1

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Reveal

  the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

  Restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

  CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

  Step 2

  If step 1 does not resolve the problem, repeat with this line:

  ~/Library/Containers/com.apple.MailServiceAgent

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Satellite Pro A100 PSAACE - the touchpad buttons do the same action

  Hello

  I have a problem with my left button touchpad keys. Although the affected software the left click function, he always does the same action as the right button.
  Drivers and installation of Windows are new. Is this a hardware or a software problem?

  Kind regards
  Oliver

  Hello

  > Is that the hardware or a software problem
  It's not easy to say, but have you checked the touchpad features using the OS preinstalled Toshiba?

  Usually, the touchpad should work without problems using the original image of Toshiba.

  May I ask what model of laptop and what OS do you have?

• I can't find the button 'action' to have my photos deleted from my iphone after import is complete.

  I can't find the button 'action' to have my photos deleted from my iphone after import is complete.

  When you import the and with what application?

  If you use the new pictures check box in the import window, as shown in this screenshot:

  

  If you're still using iPhoto then is that you say not to remove from the iPhone until you start the import process.  This window will open so you can choose whether or not to remove it from the iPhone:

  

  Finally, if you use Capture picture to import your photos the box will be in the lower left corner of the window:

  

  

• How can I change the default action of record?

  My laptop with Windows vista has curently explores as the default action (because it does not open in a new window which is my chosen prefrence) and opened as the next option. How can I change the default action to open?

  Hello Nekora,
   
  Thanks for posting on the Community Forums of Microsoft Vista.

  Note: to set Windows Explorer to open in a new window, you must have the disabled Navigation pane.

  To Turn Off the Navigation pane, follow the steps.

  1. click on the toolbar button organize in Windows Explorer.
  2. click on page layout.
  3. Turn Off the Navigation pane - click Navigation pane to turn off highlight the icon.

  Later the value folder always options open the folder in a separate window.

  1. access control panel.
  2. open the Folder Options.
  3. Select the option "open each folder in its own window.
  4. click on apply and Ok.
  5. close the Folder Options and Windows Explorer window when finished.

  Restart the computer and check if it opens in a new window.

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to make windows require a password during the installation of new programs?

  How to make windows require a password during the installation of new programs?

  Hello

  You will not be able to circumvent the password that appears before the execution of actions (installing a new program) in a non administrator account.  If you are logged on as administrator, and again, you get the command prompt, you can disable UAC (User Account Control) to stop the password dialog window.

  However, as a work around you can right-click on the installation of the program files and select run as administrator. Check if this is useful.

  Let me know if I can help you with this question or any problem related to Windows.

• OAF Page expand to change the button action

  Hello

  We have a standard page of the OPS in iProcurement, where there are a standard change request button, which redirects to another standard page. We want to change the button action to call another custom OAF page. Please let me know how to do the same.

  Attached screenshot for reference

  Follow the steps below to create a button through customization.

  1. click on customize page where you want to create an element.

  2. find the area where you want to create

  3. click on Create icon, which opens a new window.

  4. Select the style of the item as button and give the values for the element.

  Browse link below

  Oracle concepts for you: Add a button to a Page of the OFA

  Also paste the error if you get none after following steps above.

  BR, FLS

• Advanced Scripts of Action does not not in the advanced Actions window

  I have no idea how or why it happened, but on some scripts that I applied to some buttons, when I click on the folder icon to open the script in the advance action window, the script does not load. It shows just blank like this (screenshot below). If I try to select it from the dropdown of existing shares, it does not load. If I try to make a new script again, it will work initially, but the same thing happens if I try to open it again. No idea how to solve this problem?

  

  It looks like the corruption of the file. You're careful with naming of decisions and measures? Never use a name that has already been used for another object.

  If you copy an interactive object in a new project, the action in the annex is copied (at least if you're on CP8 or 9).  Normally slides copy and paste in a new project could help, only bit worried on the copy with the actions.

  Have you already restarted Captivate and maybe your system as well? Worth a try.

• Document windows does not use all the available on new monitor display area

  Hello

  I have a new monitor - a Benq BL2711.

  I have set up as my secondary monitor on display in Windows 8.

  I can put Photoshop (CS6) on this screen and maximize the it, but there is a vast space not used in the document window, which is not used. I want to show a lot more of my images that I can currently, but the document window will not only fill all that screen real estate. A large part of it is lost.

  The panels occupy the right space to the bottom of the screen, but the window of the document (or the display area?) uses only 60% of the height of the screen.

  What is a limitation or do I have to configure something? (I have reset the workspace of photography).

  Thanks for any help

  Nick

  It is really a shot in the water, but it's the space used by the "timeline" Panel when it is open. Try to check in the menu window and close the bottle.

  Other that that, there are always some good old Reset preferences. Make sure you save the custom actions/brushes/presets and so forth first!

  

• Add an Extension field to save the last Action of the agent and display this on email

  I am trying to add an extension field to a call to save the last Action Officer tapped on a call.  I do what we want to display (on e-mail alerts, for example) the last 'real' action taken a call, and we don't want to display the text of the generated system which is often recorded in the SOLUTION_DESC column.
  for example, e-mail sent displays like this:
  
  I created the extension field and have obtained this update when the call is handled (details of the changes I made are below).

  
  The problem I have is that the email that is sent to the receiving a transferred call is the latest version of the data from the field to this topic.  It's as if the system did not write data in the database until the logic 'send e-mail' runs.  If I have question registration in SQL immediately after the postponement or the transfer of the call I can see the update is written to the field of the extension of the database, but there after send it an email.

  for example, I change a call and type something in the field of Actions and Solutions.  I transfer the call to a group.  The email that is sent to the groups has the extension defined field to display on this, but it does not display the last typed Action in, it displays the previous Action (there's a).

  Any suggestions on how to make sure that e-mail displays the last Action?

  The changes I've done so far:
  In Custom_InCallDetails.js
  Added the custom function:
  function setLastUserActionText() {}
  var da = document.all;
  var sd = da. SOLUTION_DESC_HTML_EDITOR. Area;
  If ((da. TEMPLATE_IND. Value! = 1) & & (sd! = ") & &! (TF (da. TakeOver.value)))
  {
  var DB = FindNavWindow (). document.all.DB;
  var localRS;
  var OfficerName;
  var CurrentDate = new Date();
  DB. ClearParam();
  DB. AddParam ("REF", da.) OFFICER_REF.value);
  localRS = DB. GetRecordSet ("Get agent Name");
  If (localRS == null | localRS.recordCount == 0)
  OfficerName = '(unknown) ';
  on the other
  OfficerName = (localRS("FULL_NAME").value);
  DB. ClearParam();
  DB. AddParam ("CALL_NUMBER", da.) CALL_NUMBER.value);
  DB. AddParam ("SOLUTION_DESC", (sd + "\r\n (in" + OfficerName + "on" + CurrentDate.toLocaleString () + "" ")" ""));
  localRS = DB. GetRecordSet ("CustomGetLastUserActionText");
  If (localRS == null | localRS.recordCount == 0)
  {
  localRS = DB. GetRecordSet ("CustomAddLastUserActionText");
  localRS = DB. GetRecordSet ("CustomUpdateExtensionDataAllocation");
  }
  on the other
  localRS = DB. GetRecordSet ("CustomSetLastUserActionText");
  }
  }

  Update OnSubmit function call:
  function OnSubmit (s)
  {
  …
  p.Submitted = false;
  Returns false;
  }
  Start personalization
  setLastUserActionText();
  Customization of the end

  SetSubmitValues();
  …
  }

  In infra_custom.sql
  ! CustomUpdateExtensionDataAllocation
  CustomUpdateExtensionDataAllocation
  UPDATE SU_NUMBER_ALLOC SET NUMBER_ALLOC = (SELECT MAX (REF) + 1 SU_EXTENSION_DATA) WHERE TABLE_ALLOC = 'SU_EXTENSION_DATA. '

  ! CustomGetLastUserActionText
  ! 500219 is the Ref of the field "last user action text.
  CustomGetLastUserActionText
  SELECT REF FROM SU_EXTENSION_DATA WHERE REF_NO =: nCALL_NUMBER AND EXTENSION_FIELD_REF = 500219
  
  ! CustomAddLastUserActionText
  CustomAddLastUserActionText
  INSERT INTO SU_EXTENSION_DATA
  (REF,
  REF_NO,
  EXTENSION_FIELD_REF,
  VALUE_STRING,
  CORE_ENTITY)
  SELECT
  (SELECT MAX (REF) + 1 OF SU_EXTENSION_DATA) + ROW_NUMBER () OVER (ORDER BY: nCALL_NUMBER).
  : nCALL_NUMBER,.
  500219,
  : sSOLUTION_DESC,.
  1

  ! CustomSetLastUserActionText
  CustomSetLastUserActionText
  UPDATE SU_EXTENSION_DATA SET = VALUE_STRING: sSOLUTION_DESC WHERE REF_NO =: nCALL_NUMBER AND EXTENSION_FIELD_REF = 500219

  Why not add the extension field in the call screen. Then update the field on the screen in onsubmit. In this way, it will update the value and be available to the e-mail address.

• "Assignment of a top layer of the object on the master" (master page numbers) I understand the layer must be up to show above images placed on the pages, but how can I do this?

  I have added page numbers to my master pages. They appear on the pages, but I have images on the individual pages which cover the numbers. I understand that I must assign a top layer of the object, but I don't understand how to do it. Please help me? Please explain a just clear as possible, I read the other replies but still do not understand. Wish it was as simple as select object, do a right-click, edit the layer!

  Thank you very much!

  1. open the layers panel (window > layers)

  2. in the control panel menu, choose new layer. In the dialog box, you can name the layer if you like Page numbers.

  3. on your main page, select the text block with the selection tool (black arrow tool) page numbers.

  4. If you now look at the layers panel, you will see a small square right of one of your layers (or 1 layer if you have not created any new layers). Drag instead of the layer of Page numbers. [Explanation: the square is a "proxy" for the selected objects.] [Drag to the other layer moves the objects on this layer.]

  Good luck!