Consider group, not objects in.

Similar Questions

• Group Policy Object Editor does not open in my computer it says that there is no

  Group Policy Object Editor does not open in my computer it says that there is not. I tried to open it by the command run 'GPEDIT. MSC' again, it did not open. IM usung windows vista 64-bit home edition. is this some kind of virus?
  Please answer as soon as possible

  It's the Vista, installation, modernization and the Forum to activate.

  You will get the best advice for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  See you soon. Mick Murphy - Microsoft partner

• What is and what is not considered a transparent object in Illustrator?

  Hi guys!

  A couple of years ago, I placed a picture hidden above a spot color in InDesign and this brought me some problems. A weird white box appeared between them and I lost my impression. A few days after the incident, I discovered that it is not recommended to place transparent objects above spot.

  Well, now in Illustrator, I don't know if I have the same problem if I place a clipping above one mask spot. I used the Flattener Preview to see my transparent objects and my clipping mask was not one of them, but I would like to know for sure: is a clipping mask (with a a tif) considered a transparent object in Illustrator? I have again the horrible white box? I really need to put this over the stain of color clipping mask.

  I'm fair to assume that transparent objects in Illustrator:

  1. Mixture of the effects
  2. Shadows, etc.
  3. Mask with LAMINATED clipping objects

  ?

  Adobe has a white paper that explains this better:

  http://partners.Adobe.com/public/ASN/en/print_resource_center/TXPGuide.PDF

  Yes the 3 elements you mention create transparency.

  Explore the window > overview of flattening

  Which should prove to be more useful than a long answer.

  

  Is your problem with a test print composite color (e.g.: color laser printer), or printing of separations?

• the Group of objects webutil is not avialable in this form

  Dear Sir.

  The message "the Group of objects webutil is not avialable in this form" is coming when I double click on a form to upload a photo.

  All the things that I have finished configuring webutil on my updated linux application server.

  It is urgent, please help me.

  Kind regards

  SKROY

  Or you can activate the transfer in your webutil.cfg file, as follows...

  Transfer.Database.Enabled = True

  Transfer.appsrv.Enabled = True

  Fabrizio

• Change the opacity for group of objects on a single object, but not each other?

  I have a several simple objects of color filling all United over a context with a Uni fill object.  I want to reduce the opacity of objects on the object in the background.  However, my makeup of efforts the opacity of objects change on all other objects and I want to keep their strong colors.

  

  And it's the one with an opacity, but I want to stay solid on the other.

  

  Thank you

  Martin

  I've selected all the objects at the top of the page and click on the little circle thing circle in the layers palette and then adjust the opacity and it seems to work very well.

  It's because you have now applied the transparency of a layer setting. (When you clicked on the Meatball, you targeted layer, no not objects).

  You could have done the same thing by bringing TOGETHER actually what you call 'a group of objects' and by applying the transparency to the group setting, instead of to individual objects. (See why it is important to try to talk in terms of the program?)

  Always have the appearance Palette open so that you can always keep your eye on what Illustrator called the current selection. It will help you avoid a lot of confusion if you keep in mind, what kind of object (Path, group, layer) said Illustrator is selected.

  JET

• Tab 'Users' lack of Group Policy Object Editor snap-in in MMC for - how to market?

  "I posted a similar question in the forum TechNet hereand I have proposed a solution - use support KB313222 -" ","How to restore the default security settings? " ;
  But it did not help me - stil I don't see 'Users' tab when you configure the snap "Group Policy Object Editor. How could I get this tab "lit"?

  Thank you.

  Also when I posted something similar but better described-> "how to apply Group/Local strategies to limited accounts (non-admins) only?"

• Cannot map drives using Group Policy objects in Vista

  Hi all

  We strive map drives using Group Policy on our image of Vista. (In the past, we have used kixtart, but try to avoid writing scripts).

  The installer under User Preferences/Configuration/Windows Settings/Player cards of the GPO. Because the GPO is attached to the ORGANIZATIONAL unit that contains the Vista PC, we both loop processing market.

  Extensions side customer GP are installed on the workstation.

  The results are inconsistent - at best, if we use 'Create', 'Update', or 'Replace' as the action of the drive mapping.

  Sometimes, card readers, sometimes they are not. They just recently. Nothing is mentioned in one of the newspapers.

  All the world did this with success?

  Hi OxG,

  Thank you for visiting the Microsoft answers community site. The question you have posted is linked to the Group Policy object and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Option of range & ASA 5510 - a group of objects

  Hello

  I have 3 ASA 5510 s; two of them are in production and the 3^rd is new. I inherited two in production and was trying to set up this 3^rd by using some of the existing network object-group statements.  The problem is that when I try to create a range of IP addresses in one of the groups of object; the range command is not available. One of the extracted statements from one of the ASAs production: network of the REMOTE object
  range 62.77.130.14 62.77.130.208

  The two ASAs have the same image of worm (asa842-k8).  Is there something I'm missing to enable the option in the range on the ASA News?

  Thanks in advance,

  ~ sK

  Hello

  Are you sure that the ASA News started the new 8.4 (2) software?

  There are

  • object-group network
    • accepts networks and addresses of host under it
  • network of the object
    • accept addresses from subnet, range and host under it

  Configuring "network object" came available in 8.3 software. Before that in the software 8.2 and earlier than the 'object-group network' (and other types of groups of objects") exist.

  Maybe you have several images start on the ASA News and its actually the old software still boot?

  What does the ' running shoe see the?

  If it lists both the command for old and new software then delete the old "system start" command, save the configuration and restart.

  I hope that the above information was useful

  -Jouni

• Something similar to groups of objects, but for the ports? (must be used on an ACL)

  Hello community!

  I'm fairly new, when it comes to firewalls, but I have some experience with routers and switches, so I'm not completely lost.

  Practically, we all know that a group object is a large bucket to throw things and then managing them as a single group, which is very useful for many reasons... so is there something similar that we can use in an ACL for the port?

  Say so, let that I want to allow the following ports:

  • 80
  • 443
  • 25
  • 30500
  • 20500
  • 8080
  • 14600
  • 21
  • 753
  • 22

  And instead of doing something like this:

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 80

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 443

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 25

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 30500

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 20500

  access-list extended dmz_access_in permit tcp host WEB host WEB-EXT eq 8080

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 14600

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 21

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 753

  dmz_access_in list extended access permit tcp host WEB host EXT - WEB eq 22

  do something like:

  dmz_access_in list extended access permit tcp host WEB host WEB-EXT eq PORT_LIST1

  Thank you!!

  PD: Excuse me if some port above are not TCP, if just one example. I just start typing all the numbers that came to my head.

  Hey Rolando,

  On a SAA, you can combine services and protocols based on the source/destination in an object-group service oriented. Your example would look like this:

   object-group service PORT_LIST1 service-object tcp destination range 21 22 service-object tcp destination eq 25 service-object tcp destination eq 80 service-object tcp destination eq 443 service-object tcp destination eq 753 service-object tcp destination eq 8080 service-object tcp-udp destination eq 14600 service-object tcp destination eq 20500 service-object tcp destination eq 30500

  You can create also integrate groups:

   object-group service WEB_PORTS service-object tcp destination eq 80 service-object tcp destination eq 443 object-group service PORT_LIST1 group-object WEB_PORTS service-object ...

  This type of group is going where the Protocol is specified in the ACL:

   access-list dmz_access_in extended permit object-group PORT_LIST1 object HOST object EXT-WEB

• How to get the default rotation tool locate the pivot point in the exact Center of an object or a group of objects?

  My new copy of the CC the default pivot set to one side, rather than at the center point. I know I can manually move the autour pivot point, but this is not always accurate. Is there a way to have HAVE determine exactly at the Center and then do this by default?

  Pivot the tool rotation default to the center of objects and the text box (frame). For text of Point, it is by default the anchor of the line base, and for a group of Point text objects, or multi-selction defaults to the geometric center of an invisible shape formed by the collective reference anchors.

  And you are right, that the setting of Center in the attributes Panel is not available for text of Point, single or multiple objects.

  I don't have an idea for your particular workflow needs, but if I really need to turn a group of objects text around its Center Point, I could do this:

  1. Select the group, and copy
  2. Paste in front
  3. Vectorize
  4. Select the converted objects and text objects group, then select the rotation tool and the pivot will be by default the Center (of the converted objects)
  5. After turning, remove the converted objects.

• How to add groups of objects to a form?

  I'm working on my forms on Linux, Oracle Builder Version 11.1.2.1.0.
  
  Now, I want to use the Webutil library. After plugging in the library on a form, I need to add the Webutil.olb to groups of form objects.
  
  The documentation says to do to drag the object file to the node groups of objects on the form. But I can't drag the file to a folder on the node.
  
  Actually drag all files to open in the form designer is not feasible in the Linux version.
  
  I also tried opening the Webutil.olb first, it appears under libraries of objects, click on the file and drag to the node of the form, did not work.
  
  Anyone know how to add the object to a form in Linux Version Oracle Builder?
  
  Thank you!

  frank1018 wrote:
  I'm working on my forms on Linux, Oracle Builder Version 11.1.2.1.0.

  Now, I want to use the Webutil library. After plugging in the library on a form, I need to add the Webutil.olb to groups of form objects.

  The documentation says to do to drag the object file to the node groups of objects on the form. But I can't drag the file to a folder on the node.

  Actually drag all files to open in the form designer is not feasible in the Linux version.

  I also tried opening the Webutil.olb first, it appears under libraries of objects, click on the file and drag to the node of the form, did not work.

  Anyone know how to add the object to a form in Linux Version Oracle Builder?

  Hi Frank,.
  Open webutil.olb
  Select groups of objects in the form builder and click Create
  now, select the (newly created) object group and go properties and make the subclass
  1. Select the object
  2. Select Module: WEBUTIL
  3. Select object name: WEBUTIL

  Now press ok and fact...

  Fix webutil.pll and you're done.

  I hope this works...

  Hamid

• Application of effects to the Group of objects in a floating frame - fail.

  Hi, I do not know if someone has encountered this... I have a group of images (rating music, so black on white in fact) in a floating frame.

  I have a textured background, and I want to knock out the white in the pictures to let the background show through. Effect of obscuring should work, and on "static" images (not in a scrolling frame), it is very good. But I tried to apply the effect to the framework itself; in the Group of objects; the individual objects. All the methods of good air in InDesign, but when previewing the content viewer, I can see the effect didn't, uh, indeed. This project is directed to iOS, and I'm assuming that the content viewer gives a fairly accurate glimpse?

  And I don't want to get into the clipping paths or alpha channels, but if there is a better way to knock out white, I would be very grateful for the entry. Screenshots show (left), InDesign Content Viewer (right). Thank you very much!

  

  transferred to DPS forum.

  Blend modes are not compatible between overlays and static content. You will need to re-think this or find a way to get this content to have a transparent background. Where did this come from?

• Rename the layer, group, Javascript object

  Hey guys,.

  I am writing a script which renames a layer and the group within the layer, then an object in the layer (but is not part of the Group) and have it executed in a loop.

  This is what I have so far, change of group name does not work.

  #target Illustrator
  
  var doc = app.activeDocument;
  
  idLayers(doc)//IRename layers
  idGroups(doc)//Rename groups
  
  function idLayers(doc){
      for(i=0;doc.layers.length>i;i++){
          doc.layers[i].name= 'id:GTM_Group '+(i+1)
          }
      }
  
  function idGroups(doc){
      for(i=0;doc.groups.length>i;i++){
          doc.groups[i].name= 'id:GTM_Group '+(i+1)
          }
      }
  

  I got into anthing to rename the single object still since I can not even rename it group work. I suspect that the new group name section does not work because I'm either using the incorrect syntax or a command that is not valid. Any ideas?

  (Attention to groups hidden within the transparent traces or other groups because it will find and rename these groups as well.

  to avoid dealing with groups (or objects) within the groups, not loop through all elements in the document, reference your articles by layers

  #target Illustrator
  
  var doc = app.activeDocument;
  
  idLayers(doc); // Rename layers
  
  function idLayers(doc){
      for(i=0;doc.layers.length>i;i++){
          var currentLayer = doc.layers[i];
          currentLayer.name= 'id:GTM_Layer '+(i+1);
  
          idGroups(currentLayer); // Rename groups
          idPathItems(currentLayer); // path items
      }
  }
  
  function idGroups(layer){
      for(j=0;layer.groupItems.length>j;j++){
          layer.groupItems[j].name= 'id:GTM_Group '+(j+1)
      }
  }
  
  function idPathItems(layer){
      for(k=0;layer.pathItems.length>k;k++){
          layer.pathItems[k].name= 'id:GTM_Path '+(k+1)
      }
  }
  

• Need help with the curve of a group of objects

  Salvation Group;

  This is my first post in this group. I'm quite new to Adobe Illustrator CS5, and I had to start using it to provide the type of file to a printer for Sublimation in the USA. They use CS5, and all colors are limited to the Pantone Solid Coated for their printing system. I'm swimsuit fabric printing.

  However, my question is probably very basic. It is also frustrating, because I have already successfully did this that I ask, just do not remember how I did it.

  

  In my image, the upper rectangle has curved shape finished (bottom). I've done this before, with in fact several objects together. They all have the curve with the rectangle.

  I tried to do it again, using all kinds of transformation tools (shear), the tools of the effect and everything I could find, but nothing has worked. I thought that maybe to shear would work if I could fix in the middle of the rectangle and shear on both sides of the rectangle to the top, but it does not work. I think I'll start to take notes when I find something that works!

  How this simple curves of single object or group of objects? It can be done, I know!

  Thank you, Tom.

  You can also use the Suspender Warp or distort the Emvelope > make with Warp Arc

  How to apply it

  as individual objects and the other as a group

  As objectrs

  

  As a group

  

• Fastest way to cut a group of objects with less before?

  I copy the object used for cutting, paste in front of each object and use less front several times for all objects that is not a great fun for a larger group of objects. Is there a faster way?

  Draw a straight line where you want the cut to be.

  Keep it selected, then object > path > divide objects below.

  This works pretty well on most things, but you will need to make a few adjustments special if they are filled and the contours of objects that need to be divided.

  Otherwise you will get the features along the demarcation line.