Considerations of design for health care Solution

Similar Questions

• Considerations of Design for the U1 Virtual Center 6.0

  I look at the deployment options in my environment and the plan initially to resist a LAB environment. I was looking at the possibility of defending the VCSA "LAB" with HA PSC behind and F5 load balancing. My question / concerns are I will be at a later date connect you to windows or virtual VCSA in this HA PSC environment? I know that you cannot mix windows and the PSC system, but I think that you should not have problems connecting a virtual center of windows to VCSA PSC? I hope that what I am asking is logical...

  "vCenter Server Deployment Models" > "mixed operating system environment' > 'Eexample of a mixed environment of operating systems with a device of service of external platform controller' section of the documentation of vSphere 6 have answers to your question." " It goes the same for environmental HA PSC behind F5.

• SOA for integration of health care

  Hello
  
  I'm not sure this is the right place to post this question. I am looking for an installation guide for SOA for integration of health care. In addition, he mentioned it requires installing the editor of Oracle documents. Where can I download Oracle Document Editor. I searched but not able to target.
  
  Thank you
  NAFTA

  Hello, NAFTA.

  Where to find toolkit for HIPPA 5020 for integration of SOA healthcare?

  As mentioned in the thread above, you don't need any extra Toolbox. Just be sure to apply the patch #13357551 on top of Oracle SOA Suite 11.1.1.6.

  Kind regards
  Anuj

• Sa20-S103 can't install software designed for Windows XP

  Because I installed a service pack II - I had a problem with the installation of some software on my SA20.
  Even with software designed for Windows XP. We have several PC's desktop and my SA20 is a laptop. All PCs have the same XP version with the same updates.

  So in my widows case gives the following warning:
  C:\WINDOWS\SYSTEM32\CONFIG. NT. This file system is not appropriate to run MS-DOS or Microsoft Windows applications. Select a button 'Close' to terminate the application activity.

  Microsoft told me: Sorry, it's a problem with Toshiba Windows XP under System. They explained that in this case service pack II can work not properly in contact with the XP system redesigned for Toshiba. Who can help me?

  Rafal

  Hello

  Check this link http://support.microsoft.com/?kbid=324767 please. I hope that there is the solution for you.

• Cannot use Family Health Care Manager get error violation of cess to 0x779EE9D7 (tried to read from 0xB67C4C4C), program completed

  Original title: installation and execution of the FHCM

  I downloaded a trial version of Family Health Care Manager, (FHCM), that I need something to replace MEM Quicken.  When I try to start FHCM I get the error message: "Access violation at 0x779EE9D7 (tried to read from 0xB67C4C4C), program finished". ""  I have no idea what it means, so I'm using technicians FHCM, but none of their collaborative has resolved the problem.  Help please. Larry

  It is a very practical program to look and see if you can use it to solve problems.

  Process Monitor v2.8
  http://TechNet.Microsoft.com/en-AU/Sysinternals/bb896645.aspx

  This example may or may not work for you with your program, use the built-in Administrator account to perform the installation?

  "It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to the built-in administrator. Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and folder administrator integrated, where you might be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disable the built-in using administrator account:

  «net user administrator / active: No.»

  Solve installation errors using the SubInACL tool to repair the file and registry permissions
  http://blogs.msdn.com/astebner/archive/2006/09/04/solving-Setup-errors-by-using-the-Subinacl-tool-to-repair-file-and-registry-permissions.aspx

  Assuming that you have installed the program successfully, it will function in Mode safe?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  "tried to read from 0xB67C4C4C", which indicates that the program tries to access some areas of memory that he is not allowed access.  It can be a 'bug' program or maybe faulty memory?

  How to use the memory diagnostic tool in Windows 7 or Vista.
  http://www.Vistax64.com/tutorials/65361-memory-diagnostics-tool.html

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

• Plan and Design for vSphere Services Kit 5

  In vSphere 4 there a kit called the:

  "

  Download the Plan and design for vSphere 4 Services Kit R1

  Maybe you get on partner central.  Is there a such Kit for vSphere 5 as well?

  The only thing I see is 'VMware vCloud Plan & Design Service materials '.

  which focuses on vCloud Director and senior level management tools.  It seems that it would be good material overall about VCDX design.  Someone at - it info on where he went in vsphere 5?

  Thank you

  Connect to partner Central, and then look under the "Sales" tab  Then find the 'Solutions Enablement Toolkits'.  Then, look under "Infrastructure Virtualization Library."  "VMware vSphere Plan and Design Service delivery Kit.

  belongs to the library of Infrastructure Virtualization.  However, only some partners have access to

  "VMware vSphere Plan and Design Service delivery Kit.

  There are 5 parts to the library of virtualization Infrastructure and the

  "VMware vSphere Plan and Design Service delivery Kit.

  SET is one of them.  You don't get all the 5 pieces automatically just to have a central account of the partner.  Your business must have a certain status of partner and have the jurisdiction of "Virtualization of infrastructure" before you will be able to download

  "VMware vSphere Plan and Design Service delivery Kit.

  However, if your company does not have the legal status to be able to download it, visit this link:

  http://store.VMware.com/store/VMware/en_US/PD/ProductID.224267000/

  Allows you to purchase the library of virtualization Infrastructure directly from the VMware store.

  In all cases, the

  "VMware vSphere Plan and Design Service delivery Kit.

  Compatibility tools solutions has the best model I found to use for mapping the content of the VCDX.

  There is a word called "vSphere architectural design" document  This is the specific document in the

  "VMware vSphere Plan and Design Service delivery Kit" that gives you what you want.

• Oracle SOA Suite of integration of health care against Oracle B2B

  What is the difference between integration of healthcare for SOA Suite vs Oracle B2B?

  When we were able to implement the Protocol HL7 in B2B himself, then why do we need health care? What are the benefits of the integration of health care?

  For a company that needs a time HL7 and EDI implementation, Oracle B2B should solve? Can achieve us EDI transactions in health care? If so how do we do that? Please advise...

  Thank you-

  Oracle B2B is used for internet based B2B (including HL7) communication while Oracle SOA Suite for integration of health care is to santee intranet communication. You can say that Oracle SOA Suite (middleware) has been extended to support Messaging native HL7 within a company through the integration of health care.

  Kind regards
  Anuj

• Is it possible to use an application designed for iPhone/iPad on my iMac or (older) instead of the iPod touch?

  Sorry, I don't have an iPhone and I'm not a user app.  But I found one that I really want to get.  The description says that it is designed for an iPhone or an iPad.  Can I download it on my iMac and use iTunes to put on my older iPod touch?  Or just use it on my iMac?  Here is the app in question.  Thank you!

  iTunes does not sell at apps for your computer.  All applications are for iPhone/ipad/ipod.

  You will need to check the requirements for the application know what version of iOS is required if you want to use on your iPod.

• choice of the model of design for data acquisition system

  Hi all

  I have a problem on the selection of the model design / architecture for a data acquisition system.

  Here are the details of the desired system:

  There are data acquisition hardware and I need to use by looking at the settings on the user interface.

  the period of data acquisition, channel list to analyze must be selected on the user interface. In addition, there are many interactions with the user interface. for example if the user selects a channel to add scanlist, I need to activate and make it visible to others on the user interface.

  When the user completes the channel selection, then he will press the button to start the data acquisition. Then, I also need to show the values scanned on a graph in real time and save them in a txt file.

  I know that I can not use producer consumer model here. because the data acquisition loop should wait for the settings to scan channels. and it works on a given period by the user. If the loop of user interface makes higher then loop (loop data acquisition) of consumption. This means that queue will be bigger, larger. If I use notifier this will be some data loss comes from the user interface.

  y at - it an idea about it? is there any model of design suitable for this case?

  Thanks in advance

  Best regards

  Veli BAYAR

  Software for embedded systems and hardware engineer

  Veli,

  I recommend the model producer/consumer with some modifications.

  You might need three loops.  I can't tell for sure from your brief description.

  The loop of the User Interface responds to the user for configuration entries and start/stop of acquisition.  The parameters and commands are passed to the Data Acquisition loop via a queue. In this loop is a machine States that slowed, Configuration, Acquisition and stop States (and perhaps others). The data is sent to the processing loop through another line. The processing loop performs any data processing, displays the data from the user, and records to file. A registrant can be used to send the Stop command or stop the loop of the UI for other loops.  If the amount of treatment is minimal and the time of writing files are not too long, the functions of processing loop might be able to happen in the case of the UI loop timeout structure of the event.  This makes things a little easier, but is not as flexible when changes need to be made.

  I'm not sure that there is a type of design for this exact configuration, but it is essentially a combination of the models Design of producer/consumer (data) and producer/consumer (events).

  Lynn

• I get an error on blue screen ATI2DVAG infinite loop and am looking for a suggested solution for XP.

  get an error on blue screen ATI2DVAG infinite loop and I am looking for a suggested solution for XP.

  Hello jvecc,.

  Thank you for visiting the Microsoft answers community.

  This problem is caused by a defective unit or a device driver. Visit the website of the manufacturer of your computer or see if AMd drivers directly will work for your hardware configuration and then uninstall and reinstall your drivers.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop computer (NEC) designed for windows XP problem.

  My aunt give me a phone NEC which is purchased from the Japan. It is designed for windows XP, now the problem is that my laptop does not work so what I did, I installed the windows 7 starter edition, it installed successfully but I can't put any hardware such as printers, Cam, USB, mouse, high connection throughput or even my helmet. I don't know what's going on, or maybe my laptop is really designed for windows XP. I need help, what I really need to re install Windows XP? or there is a way to solve this problem. Thank you

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, LAN, Audio, USB, SATA, etc, and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  J W Stuart: http://www.pagestart.com

• Running a program designed for x 32 bit machine Windows XP x 64

  Hello

  I try to run a program designed for Windows 32-bit on a 64 bit machine x x. I installed the program and moved the directories in the directory Program Files (x 64) in the regular Program Files directory - it's where shortcuts have been pointing.

  When I run the program I get an error message "" an unhandled win32 exception occurred in "PROGRAM NAME" ". Is there a way I can run this program on this machine?

  Good reading this forum:

  http://www.SevenForums.com/virtualization/11173-Windows-XP-32-bit-Windows-7-64-bit-OS.html

  If it takes you get launched, you can probably get a 32-bit virtual machine running.

• System Restore error: file spp.dll is not designed for windows or there is an error.

  Original title: download spp.dll

  My SPP.dll file is 0 kb.  When I try to access the system restore, it indicates that the file spp.dll is not designed for windows or there is an error.

  How can I get another spp.dll file? I can download one from the internet.  I tried but just keep getting a service offering public fixit. I bought RegUtility, but it did not fix the file.

  Try to run the System File Checker:

  http://support.Microsoft.com/kb/929833/en-us

• WMCE54AG - dialog box 'Site not designed for Media Center'

  I just bought WMCE54AG media extender on ebay and it connected to my PC Windows XP Media Center.  It seems to work fine except that I can't access Online Spotlight.  I get a dialog box saying "Not designed for Media Center Site" and asks me to view them later / now display / Cancel.  I select view now and get the Online Spotlight menu options, but can't do anything with it.  This feature works fine on my PC.  Is there some setting I have missed on the Extender?  I tried to update the firmware, but when I have intalled, it says I have a newer version, so I cancelled it.  Any help would be greatly appreciated.

  Well, after trial and error, I finally understood what the problem
  a. the Linksys Extender is not compatible with IE7. After rolling back to
  IE6, I could see online focus in the media extender. As a note of
  careful, I had upgraded to IE8 beta 2 and Spot online has stopped working on
  my media center PC as well. I had the same error as I did on my extender. This
  in the end is how I realized that the problem was with the IE version.

• How to run programs designed for Windows 3.1

  How can I get vista to rum a program designed for windows 3.1

  How can I get vista to rum a program designed for windows 3.1

  I found 2 sources of information for your question:

  1. it is a tutorial from eHow:
  How to run Windows 3.1 on Vista
  http://www.ehow.com/how_6915732_run-Windows-3_1-Vista.html

  2. it is a response dated October 6, 2010, this MS Answers forum.
  http://social.answers.Microsoft.com/forums/en-us/vistafiles/thread/caa2cea4-9088-42f7-BDA4-1da12cc667ec

  I have no technical knowledge of the object. Simply provide references.
  If you have any other questions, you will have to wait for the experts. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.