System Restore error: file spp.dll is not designed for windows or there is an error.

Similar Questions

• When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file.

  When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file. What should I do?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• While trying to update the drive, I get error 2753.  The file 'acrosup64.dll' is not marked for installation.

  I get an error trying to update the drive that is suggested by creative cloud.  Error 2753.  The file 'acrosup64.dll' is not marked for installation.    I tried to uninstall and re - install drive, but when it's time to update again, I get the same error.  Is there a solution or get around it?

  Hi freddiebegood,

  Please see this KB for the solution https://helpx.adobe.com/acrobat/kb/error-internal-error-2753-install.html.

  Kind regards

  Nicos

• error the file acrosup64.dll is not marked for installation

  I'm having problems with adobe reader ease (79%) of the drive, he said "the file acrosup64.dll is not marked for installation ' I have a windows 8.1.

  Try the following

  • Update, unzip it, then run the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html
  • Download and run the Installer http://get.adobe.com/reader/enterprise/ offline

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• Have you solved PSE 14 TIF Err "SelectivPalette.8li not designed for Windows.

  PSE 14 open NAVE correctly but get ' Adobe Photoshop elements 14\Plug-Ins\Google\Selective C:\Program Tool\SelectivePalette .8li is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support. ' I rinstalled. Any suggestions?

  joycem77985033 wrote:

  PSE 14 open NAVE correctly but get ' C:\Program Adobe Photoshop elements 14\Plug-Ins\Google\Selective Tool\SelectivePalette .8li is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support. ' I rinstalled. Any suggestions?

  This file is not part of the installation of components, but it seems that it depends on the installation of Nik Software.

  selectivepalette.8li - what is selectivepalette.8li?

  A Google search for selectivepalette.8li returns several answers.

• Hello, I can't update Adobe reader. 2753.the error file 'acrosup64.dll' is not marked for installation.

  

  Looks like you're under Windows.  Download and run the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html then download the Installer http://get.adobe.com/reader/enterprise/ offline

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Age of Empires 3 does not start on a vista machine, get this error "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error."

  I'm trying to play age of Empires 3 on my computer running windows vista Home premium and the program does not start. I get the error message: "C:\Program Files\Microsoft Games\Age of Empires III\d3dx9_25.dll is not designed to run on Windows or it contains an error." I tried many suggestions from Microsoft (resettlement program, reinstall in safe mode, update & reinstall the drivers for my video card, the compatibility issues with vista, updating and reinstalling directx 9.0 c, install vista service packs 1 & 2) but nothing has worked so far. I was able to play the game on the same computer with windows xp installed (it's a different hard drive that is not in the computer, and everything is the same) and it worked fine. My computer is old enough, but like I said the game worked before installing vista. ASUS A7N8x deluxe, AMD Athlon xp 3200 +, ATI radeon 9600, 2 GB OCZ ram that all suggestions are welcome. Thank you.

  Hi Raygun55,

  Welcome to Microsoft Vista answers Forum!

  This problem may occur if the Microsoft DirectX file that is mentioned in the error message is damaged or is not copied correctly.

  I suggest that you copy the file manually by following the steps and check if you are able to play the game without any problems:

  Manually copy the file

  To do this on a computer that is running Windows Vista, follow these steps:

  1 insert the disc 1 CD for one of the following games into the player from the computer:

  o Age of Empires III

  o Fable: The Lost Chapters

  o Zoo Tycoon 2

  o Rise of Nations: Rise of Legends

  2. click on start to reduce this includes this image and then click Documents.

  3. Locate, and then click computer.

  4. search and then click on the CD drive.

  5. Locate and then click the following folder:

  CD player :\ DirectX9

  Note In this folder path, the CD player represents the drive letter of the CD drive.

  6 double-click on Apr2005_d3dx9_25_x86.cab, right click on d3dx9_25.dlland then click copy.

  In Rise of Nations: Rise of Legends, double click Aug2005_d3dx9_27_x64.cab right-click d3dx9_27.dlland then click copy.

  Note Use the Apr2005_d3dx9_25_x64.cab file for the x 64 version of the Windows operating system.

  7. find one or more of the following folders, depending on the games that are installed on the computer:

  By car : \Program Files\Microsoft: Age of Empires III

  By car : \Program Files\Microsoft Games\Fable - The Lost Chapters

  By car : \Program Files\Microsoft Games\Zoo Tycoon 2

  By car : \Program Files\Microsoft Games\Rise of legends

  Note In these folder paths, drive represents the letter of the drive where the game is installed.

  8. right click on the folder of the game which is the part that is installed on the computer, and then click Paste.

  Note If you have installed more than one game on the computer, repeat steps 5 and 6 for the other games.

  You can check the link for more information: error message when you try to start a Microsoft game: "the file d3dx9_XX. DLL was not found": http://support.microsoft.com/kb/910813

  Alternatively, you can try to install the game in XP compatibility mode and check if you are able to play or not.

  Right-click on the game > click Properties > click on the Compatibility tab > select for XP compatibility mode > click OK.

  Let me know if it worked.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error.

  Original title : A major problem with Windows Defender... will not run :(

  When I go to run Windows Defender, I get this message: MSASCui.exe bad Image... C:\Program Files/Windows Defender/Mp.Rt.Mon.DLL is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.  Then, after clicking OK, you get another small window saying "Windows Defender User Interface has stopped working... Search for an online solution and close the program (which does nothing) or close the program.    WHY?  McAfee scan says there is nothing wrong with the computer... There is something wrong. Impossible to get websites to find, or they are very slow.

  I have VISTA Home Basic edition, Emachine, bought 32 year THAT VISTA was released this January.

  That is to say 9 - seems to work better than 8 (which took awhile to do)

  SP2 is installed and I believe that most, if not all the updates are installed.

  Oh, and no matter what flash supported won't run... little is a nice way of saying. My flash player update. It is mess up until I had to update. :(

  Try the suggestion of Azam K.  If this help not to do the following:

  https://community.McAfee.com/message/208529

  McAfee should have disabled Windows Defender.  If not, or if you did turn back on, you must turn it off.  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off   Windows Defender cannot be uninstalled from the Vista OS, but can be disabled to avoid conflict with other programs.

  You will probably need to uninstall Flash and reinstall it: http://www.adobe.com/support/flashplayer/

  I don't really like to make a negative comment on an anti-malware program, but McAfee has a reputation for sometimes bogged down operating systems.  If your problem persists, you will need to uninstall McAfee (to include using the McAfee removal tool) and see if that has any impact on your computer problems.  If there is an improvement, you may consider trying another program BC

  http://www.AV-Comparatives.org/

  http://www.dslreports.com/Forum/r25776413-2011-anti-virus-poll

  Kind regards...

• Receive error message: "C.\windows\system 32\TAPI32.dll" is not designed to run on Windows at startup.

  original title: how to fix "C.\windows\system 32\TAPI32.dll".

  When starting, I get a message saying "C.\windows\system 32\TAPI32.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or support software provider."  What can I do to fix this?

  Hello

  You did changes to the computer before the show?

  Method 1: Follow these steps and check if that helps.

  Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then, restart the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Code error 0x7E - the file 'autorun.dll' could not be loaded or is damaged. Setup cannot continue. Windows 7 Upgrade installation problem

  I tried to install Windows 7 Home Premium Upgrade, 32-bit version. My current system is an Intel iMac (later), with Windows XP - SP3 loaded as a virtual machine with Parallels Desktop 4.0 build 3848 (according to their website, it is supposed to support Windows 7).

  I allocated enough space RAM and HARD drive of the virtual machine to run Windows 7. No matter what I do, when I try to run setup.exe, I get the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0x7E].

  The file 'autorun.dll' is present on the disk.

  I saw on the internet that other people have also had this problem, with or without Parallels Desktop, and get a replacement DVD of Windows 7 program made no difference to them. Nor is it an available answer, I've seen.

  My Windows 7 disc is new, so I was hoping that Microsoft could solve the problem for me?

  Thank you.

  
  

  
  

  OK, so, this response is a little late to come, but if you never solved...

  I just encountered the same problem - editing similar (Mac, Parallels 5 in my case, the SP3 of XP, MS Windows 7 Home Premium Upgrade) - you must make sure that the DVDROM drive hardware is mapped to "D:" on your XP installation. Thus on the Parallels Desktop menu go to devices, CD/DVD1 and make sure that all your actual DVD player is called is selected (should be the vertical entry in the menu) - not true CD/DVD. The reader should then start and auto run.
  I hope this helps...

• Error - location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image cannot access the desktop icon to burn a DVD.

  Original title: I can't access my desktop icon to burn a dvd.

  I can't access my desktop icon to burn a dvd.  The message I get is as follows, "location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image."  Please check this against your installation diskette. "On my toolbar, it said,"mediahub.exe - bad image"can someone please help me as I've used in the past to burn CDs and DVDs.  He moved with the computer.  Thank you

  Hello

  1. have you done any hardware changes or software on your computer before this problem?

  2 do you have a copy of Sonic application backup to reinstall it later?

  I suggest you to uninstall Sonic since Add / Remove Programs. Subsequently, check if you are able to burn CDs in your computer.

  
  Reference: burn your own custom CDs

  Hope the helps of information.

• C:\Windows\System32\wship6.dll is not designed to run on Windows or it contains an error.

  I can't open windows live mail and other programs that also many installers will not work for this reason.

  I get the following error:

  wlmail.exe - incorrect Image

  C:\Windows\System32\wship6.dll is not designed to run on
  Windows or it contains an error. Try to install the program using the
  the original installation media or contact your system administrator or
  the Publisher of the software to support

  I had to click OK 4 or 5 times to make it go away

  Many installers will not work because of this.

  System information:

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD A6 - 3400 M APU with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5610
  Graphics card: AMD Radeon (TM) HD 6520 G, 512 MB
  Hard disks: C: Total - Mo 595354, Free - Mo 401604; Total D: - 14820 MB, free - 1647 MB; F: total - 99 MB, free - 89 MB; G: total - Mo 953867, Free - 877240 MB;
  Motherboard: Hewlett-Packard, 358B
  Antivirus: Norton Internet Security, updated and activated

  Here's what I did to remedy:

  I had to replace the \wship6.dll c:\windows\sysWOW64 file not the file c:\windows\system32\wship6.dll

  I had to start Windows Recovery Environment, load the command prompt and replace the file c:\windows\sysWOW64\wship6.dll to a system of work w7 (I used an iso oem and 7zip)

  ( 1 copy the file in a place should be on my boot drive (c :) in my case))

  2 . restart your computer , press and hold F8 as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to start over; to do this, hold the Windows logon prompt appears, and then stop and restart your computer.

  3 . Select repair your computer and press enter.

  4 . Select the option for command line

  type 5 bcdedit | find "osdevice" (note that there is a space after bcdedit and | and also find) that will tell you what drive letter to use to access your startup drive (d: in my case)

  type 6 the drive letter followed by a: (d: in my case) and press enter , the guest must pass to < DriveLetter >: (in my case d:)

  type 7 copy < your place should be > wship6.dll windows\syswow64\wship.dll (replace < your place should be > with the full path to where you place the file) (note the space between the .dll and windows)

  If this does not work, you may need to replace syswow64 system32 in all the above instructions

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!