Console remotely almost without value based on the Web.  Need alternative or at least access bios vm.

Similar Questions

• VI to convert input signals NI 9402 in a RPM value, based on the frequency of the pulses

  Hello

  I'm looking for a VI convert an input signal NI 9402 in a RPM value, based on the frequency of the pulses. Is there such a thing that exists in the library of national instruments?

  I run LAbview 2014 integrated control and monitoring on on a cRIO 9802 high performance integrated system with NEITHER 9402, 4 channels, 50 LV, LV TTL Module input/output digital, ultra high speed digital i/o for the cRIO module.

  Any help would be greatly appreciated.

  The easiest way is to use the FPGA to get the time between the edges of your pulse increase (shift registers to maintain the current situation and the time will be necessary).  This will give you the period.  If it's a single pulse per turn, then the number of laps is just 60/T, where T is the time in seconds.

• Error: "this meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  Hello

  I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:

  "This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  I tried to look for a solution, but I did not understand what Live Meeting I need to download.

  Can you help me?

  Thank you.

  Original title: Live Meeting 2007

  Hi Alex,

  Thanks for posting your query in Microsoft Community.

  I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.

  FAQ: Live Meeting related topics media

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• values based on the following logic 'values after the first values of two '_' and before last '_' values '.

  Hi all

  I need the values according to below 2logics in a single select query using instring and substring

  1 values based on the following logic 'values after the first values of two '_' and before last '_' values '.

  2 values based on the following logic 'values after the first values of two '_' and before last'-'values '.

  EXM:

  Entry: ABCD_EFGH_IJKLM - NOPQ_XYZ output: IJKLM - NOPQ

  Entry:. ABCD_EFGH_IJKLM - NOPQ output:IJKLM

  Thank you.

  Check the following

  WITH DATA1 AS

  (SELECT "ABCD_EFGH_IJKLM - NOPQ_XYZ" double val)

  UNION ALL

  SELECT 'ABCD_EFGH_IJKLM - NOPQ' double val

  )

  SELECT SUBSTR (VAL, INSTR(VAL,'_',1,2) + 1, DECODE (BIGGER (INSTR (VAL, '_',-1, 1), INSTR(VAL,'-',-1,1)), INSTR (VAL,'-', - 1, 1), LENGTH (VAL) + 1, INSTR (VAL, '_',-1, 1))-(INSTR (VAL, '_', 1, 2) + 1))

  OF DATA1;

  Concerning

  Salim

• Calculate values based on the boxes are checked - for Dummies...

  Hello and thank you all in advance for your help. I'm trying to calculate a value based on the boxes checked. Specifically, I would like to add a particular value $$ each CheckBox and if this box is checked, I want to add to the total rental value (see screenshot below):

  

  As you can see in the screenshot that I have different areas that can be selected (first floor, court before, etc.), I want to assign a value to the checkbox of each region (and added value for others) and calculate a total in the "Balance of rental fees" less the deposit. I'm new with java and scripts but not know how to do it in an excel formula. I guess it's very different from what little I know of Java. Any help you can give me would be greatly appreciated.

  Calculation options are in the text field. In this screen, you only need to set the value of exports to the amount this box represents.

• Fill a field value based on the value of another field

  Hello
  Could someone tell me what is the problem with the following select statement. For a group of records, trying to fill a field with a value based on the value in another field (problem of status), but the Group of records appears empty just when I put this code in the field.
  Any help would be appreciated
  Thank you
  
  
  <? choose:? >
  <? When: IssueStatus = "Open"? >
  <? 1? >
  <? end when? >
  <? otherwise:? >
  <? When: IssueStatus = "closed"? >
  <? 2? >
  <? end when? >
  <? otherwise:? >
  <? When: IssueStatus = "Unresolveable? >
  <? 3? >
  <? end when? >
  <? end otherwise? >
  <? end to choose? >

  Use the following syntax.

  
  
  Display 1
  
  
  Display 2
  
  
  Display 3
  
  
  

• WRT350N configuration based on the web does not load on the cable port.

  I've had this router for over 6 months, and only in the last two weeks, I could not access the configuration page based on the web through my PC, connected to one of the 4 wired ports. None of the laptops I tried (Win XP, Vista) are connected via Wi - Fi without a problem. Obviously, this isn't an emergency, because I can access it through the laptop, but I use mostly my PC to manage the router.

  Any ideas on other things to check?

  Thanks for the tip, but that did not work... However, trying to fix another problem, with the USB port of a storage drive, I re-load the updated firmware and am now able to access the configuration page. Still no action on the USB key if!

  Thanks again!

• Computer hangs when the video display based on the web

  I use Windows Vista.   When I view the videos on the web, I sometimes my computer crash.  It happens intermittently, perhaps one out of every 10 times I discovered a video and occurs with IE8 and Firefox.  I reinstalled the Flash player as it seemed at the time when it crashes flash videos of base.   Just before the crash to computer, I get a bunch of lines on the screen.  Video files and DVD that is not based on the web seems to play fine

  Hello
   
  1. do you remember any change before the question?
  2. What if the problem occurs on a particular Web site?
   
  Follow the steps below and see if they help.
   
  Step 1:
   
  I suggest you to disable the auto restart in case of system error and try to take note of the error message and reply with the exact error message. Once we have the exact error message that we will be in a better position to determine the exact nature of the problem and fix it.
   
  Follow the steps below to disable automatic restart on system failure:
   
  a. Click Start.
  b. type system in the search box after clicking on start. Choose system from the list of results.
  Note: If you see the classic view of the Control Panel, you will not see this link. Just double-click on the system icon and go to step d.
  c. click on the system link.
  d. in the left pane, click Advanced system settings.
  e. Locate the startup and recovery area and click on the settings button.
  f. in the startup and recovery window, locate and uncheck the box next to automatically restart.
  g. click OK in the startup and recovery window.
  h. click OK in the System Properties window.
   
  You can now close the system window.
   
  Subsequently, when the computer is lorsque l' ordinateur s' arrete stop the computer restarts automatically and you will receive the error message, make a note of it and post back.
   
  You can also open the event viewer and check if there are other significant error messages/codes. See the link below for more details:
   
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Step 2:
   
  If you don't have to update your display drivers yet, I suggest you Update your display drivers and check if the crash stops.
  Step 3:
  I suggest you put your computer in a clean boot State, and check if the problem persists. I suspect that there could be involvement of third-party software.
  Note: Follow step 7 to your computer as usual.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Link URL in BB7, BB10 devices control? (for applications based on the web)

  Context:

  -App companies (customers are members of staff)

  -App is based on the web - no hybrid or native application but a URL

  -URL is located within the company's intranet

  Question:

  Is it possible to order this URL on BB7 10 devices? For example:

  1. drag the URL as a logo on the screen of the device (like apps look)

  2 remove the URL (and related logo) from the screen of a user if needed (for example user is no longer can access web app)

  Thanks in advance!

  Leyden

  I think the feature you're looking for on BBOS's channel Push browser info to article 5 in this doc:

  http://docs.BlackBerry.com/en/developers/deliverables/12029/Push_applications_for_the_BlackBerry_Ent...

  This functionality does not exist for BlackBerry 10, so you will need to develop a shortcut app, info here (talking PlayBook but work for BlackBerry 10 devices):

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/how-to-create-a-URL-launching-AP...

• Software based on the Web so that customers can change the templates directly to print?

  Hi all

  I'm trying to find a piece of software based on the web I saw in action but do not know what's it called, or even what to look for to find!

  I saw him at a print shop, and essentially, it was a system where society print put up a model/s for their clients (ie the brochures) and each time the customer needs a new brochure that they can open an online session, input text and images (limited by the rules of the model), they get a screen on evidence then confirmed when he's going all right to print.

  Anyone any idea what this software can be?

  Maybe it's a custom interface that you wouldn't be able to buy.  As much as I know Adobe has no what anyone who allows for processing and interaction online focus on electronic commerce.

• dynamic sum of the values entered into the Web page

  Hello

  I have a question I want to display the total sum of the values entered in the web page

  Suppose I have 3 fields

  If I enter 10 in the first field, it should consider other value two field 0

  and it prints the 10 in total value.

  next register 15 in the second field, then he cosiders 3rd classified is 0 and altogether it prints 25

  like that, I want to display the total values whenever the user enters the value in the textfield

  Hi all

  I found the solution to this blog

  Blog of Anil Oracle Application Framework: Dynamics for summation in advanced table

• App problem based on the Web on the process

  Hi all

  AIX 6.1

  11.2.0.3

  We have a new application based on the web, put in work, by changing the old system.

  We have only 100 users who can simultaneously connected, and our process of db is set to 120.

  But we met often too can mistake Treaty which we met in the previous system.

  It seems that the process are left behind when the disconnection of users or disconnected from the new web-based application.,.

  Is it possible that I can to check which processes are orphaned? And how do I auto cleaning/kill them?

  Oracle 11g has proc stored to manage this questions?

  Thank you very much

  zxy

  You say you have a web-based application.  Which implies that it is a three-tier application?  If, therefore, normally, middle-tier servers maintain pools of connections.  If this is the case, you wouldn't think that a session is created each time a user connected to the application, or that a session ended whenever a user logged out of the application.  At best, the connections of killing the middle tier has opened in the connection pool would cause problems of application performance.  At worst, you cause the application being unusable.  You could certainly do things like create profiles that limit a user can have how many sessions, how long those sessions can be slowed down, etc.  But in doing so for a three-tier application would generally strongly discouraged.

  With regard to the question of if you can change PROCESSES affecting dynamically...

  Oracle documentation is available at

  http://Tahiti.Oracle.com

  Once you're there, choose the documentation for your version of Oracle

  Online Oracle Database Documentation 11g Release 2 (11.2)

  Go to the reference

  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/TOC.htm

  Now, either search METHODS or access the initialization parameters section to find the parameter page

  http://docs.Oracle.com/CD/E11882_01/server.112/e25513/initparams200.htm#i1132608

  As with all other initialization settings, should be recorded the editable attribute.

  Justin

• How to disable the LOV values based on the State of some?

  Hello

  I have a requirement like this.

  (1) LOV Field (1), when I get a value here then based on the query I get two new values and assign to another two LOV Fields (2,3) and then disable them. However, when I enter the value in the field LOV (1) based on one of the conditions I won't have no default value then LOV fields must be enabled so that the user can select the values of LOV.

  (2) now an another LOV domain (4) when I go here again, then again two fields a LOV (5), and the free text field must be filled in.

  To do this, I wrote the logic in the following way:

  (1) get the LOV box-1 value and deriving the new values and set the session Variable to 1 and then refresh the Page. Now in PR get the Variable from Session 1 and assigning new values to LOV fields 2 and 3 and then using the property Setdisabled I deactivation.

  (2) getting the value of LOV field-4 and then drifting two new values and set the session Variable-2 and refresh the Page. Now in PR get Session-2, and then set the new values for the LOV-5 field and free text. But once the Page Refreshed and assigning values, values that we have given in the Point 1 in the LOV-2 fields, 3 turn white and field's get activated.

  Can you please let me how to achieve this? and also why the values are empty when I implement Point-2.

  Thank you
  Clarriiza

  Clarriiza,

  This VO have no matter what right SQL query, so even if you run the VO by using vo.executeQuery (), you will not get all the lines in the VO.

  So in the PR you need createRow and insert VO (otherwise your page no mistake) the below blog can be considered as an example.

  Reference: Oracle tips of Johny: OAF: how to create a PVO and use for Spel link in Oracle Application Framework

  On top of which is explained in the blog above, you set the values for the attributes of the useful, likely to set the value for the other LOV.

  I hope this helps.

  See you soon

  AJ

• Get the old value and the new value based on the date

  Hello
  
  I have a table called list created below with the rest of the insert statements.
  
  CREATE TABLE ROSTER
  (
  NUMBER OF ROSTER_EMPLOYEE_DEF_ID
  NUMBER OF EMPLOYE_ID
  NUMBER OF DEFINITION_REGION_CODE
  NUMBER OF DEFINITION_DISTRICT_CODE
  NUMBER OF DEFINITION_TERRITORY_CODE
  START_DATE DATE,
  END_DATE DATE
  )
  
  
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (1,299,222,333,444, 'JUNE 1, 2011', 30 JUNE 2011 "")
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (2,299,223,334,445, "1 JULY 2011', JULY 20, 2011" "")
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (3,299,224,335,446, 'AUGUST 1, 2011', AUGUST 30, 2011 "")
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (4,300,500,400,300, 'JUNE 1, 2011', JUNE 20, 2011 "")
  
  INSERT IN THE LIST
  (ROSTER_EMPLOYEE_DEF_ID, EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE)
  VALUES
  (5,300,501,401,301, "1 JULY 2011', JULY 20, 2011" "")
  
  
  In the table above we have columns like
  
  EMPLOYE_ID, DEFINITION_REGION_CODE, DEFINITION_DISTRICT_CODE, DEFINITION_TERRITORY_CODE, START_DATE, END_DATE
  
  The result I'm looking for the table above is based on the employe_id OF start_date AND end_date
  
  I need to get the OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_CODE
  Similarly, OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_REGION_CODE
  and OLD_DEFINITION_TERRITORY_CODE and the NEW_DEFINITION_TERRITORY_CODE
  
  
  I need to get a row of data for each employee saying old value and the new value
  
  for the employee 299 there are 3 records he puts the new record which is the latest date is to say beginning August 1, 2011 and end date of recordings old 30 August 2011
  beginning July 1, 2011 and July 20, 2011
  
  
  For the data in the table above, I need to get the data as below
  
  
  EMPLOYE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_CODE OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE START_DATE END_DATE
  299 223 224 334 335 20 JULY 11 30 AUG 11
  300 500 501 400 401 20 JUNE 11 JULY 20, 11
  
  
  Please suggest me to get the result above, based on the data. Please let me know if my messages are not clear
  
  
  Thank you
  Sudhir

  SELECT  EMPLOYEE_ID,
          OLD_DEFINITION_REGION_CODE,
          NEW_DEFINITION_REGION_CODE,
          OLD_DEFINITION_DISTRICT_CODE,
          NEW_DEFINITION_DISTRICT_CODE,
          OLD_DEFINITION_TERRITORY_CODE,
          NEW_DEFINITION_TERRITORY_CODE,
          START_DATE,
          END_DATE
    FROM  (
           SELECT  EMPLOYEE_ID,
                   ROW_NUMBER() OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE DESC) RN,
                   LAG(DEFINITION_REGION_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_REGION_CODE,
                   DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE,
                   LAG(DEFINITION_DISTRICT_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_DISTRICT_CODE,
                   DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE,
                   LAG(DEFINITION_TERRITORY_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_TERRITORY_CODE,
                   DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE,
                   LAG(END_DATE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) START_DATE,
                   END_DATE
             FROM  ROSTER
          )
    WHERE RN = 1
  /
  
  EMPLOYEE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE OLD_DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE OLD_DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE START_DAT END_DATE
  ----------- -------------------------- -------------------------- ---------------------------- ---------------------------- ----------------------------- ----------------------------- --------- ---------
          299                        223                        224                          334                          335                           445                           446 20-JUL-11 30-AUG-11
          300                        500                        501                          400                          401                           300                           301 20-JUN-11 20-JUL-11
  
  SQL>  
  

  SY.

• Additional mouse click required to set other combo box values based on the current selection combo box

  I have an Acrobat PDF form where there are 8 combo boxes (not editable) which are related in a logical way, but have unique names and a list of unique values, with the exception of a default value that represents 'null' or 'none '.

  for example:

  The first 1 combo box value is "none" followed by the value A1, B1, C1, etc., and Combo box 2 the first value is 'none' followed of the values A2, B2, C2, etc...

  The combined list useful values for every combo boxes relate to the types of unique product for the user to select mode 'radio button '.

  When the user selects one of the 8 Combo boxes and performs one selection other than 'none', then the form must verify the 7 other combo boxes and when any current value is not equal to 'none', he has to change 'None '.

  The following script is currently enrolled in the properties of "Actions - Mouse Run - Up a Javascript" from one of the drop-down list boxes, others have similar scripts as well.

  (var cbox is the current combo box and var obox is for other drop-down list boxes when called).

  Cbox var = this.getField ("TagStyleStake");

  If (cbox.value! = "none")

  {

  obox var = this.getField ("TagStyleBasket");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStylePushon");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleHandle");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleHang");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleBlank");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleMolded");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  Obox = this.getField("TagStyleSignage");

  If (obox.value! = "none")

  {obox.value = 'none' ;}

  }

  The current problem is that, when a Combo is selected and one option other than the 'none' value is clicked, the other combo boxes do not include the 'None' value.

  To reset the other combo boxes requires another click on the option which has just been moved to the position selected in the drop-down list, but it seems reasonable that the drop-down list boxes should reset with the initial click the option in the drop-down list.

  I tried other properties (Format, validate, Calculate) but without success.

  What I'm missing here?

  The normal way to proceed is to define "value option selected to validate immediately" and to place the code in the event of the combo box button. And instead of the first two lines you have, you need to use something like:

  If (! event.willCommit & event.changeEx! == 'none') {}

  Your other code goes here

  }

  The changeEx property returns the value of exports, if any, for the selected item.