App problem based on the Web on the process

Similar Questions

• I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.

  I'm not tech guru when it comes to computers.  I don't really know enough to get into trouble.  Here's my problem.

  For the last six weeks or so, I keep getting dropped offline.  AOL is my browser and I get the message "your AOL software has encountered a problem" or words to that effect.  Tech AOL were useless to solve the problem.  I checked my error messages and noticed that when I fell off line, most of them involved a WININET problem.  I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.  It's just a guess on my part, but the problem becomes very irritating to say the least.  So, if someone can you please throw some light on my problem it will be greatly appreciated? This WININET error message might have nothing to do at all with hit his offline, but thought I'd ask at least satisfy my limited knowledge of computer programs.

  Thank you

  Gordon

  Gordon

  To see if your system or software from AOL, what happens if you connect to AOL by using another browser (like Firefox or IE)?

  Wininit is part of the operating system and usually if it was the problem you would have other problems on your computer then I suspect it's an AOL software

• App problem signature after the expiry of token BBID

  My BBID is expired I had this error every time I try to re create a build

  BBID token has expired.

  I created the new token using the web interface one and momentics one another using the same id email I was using before, but whenever I try to create a new construction I got this error

  Code signing request has failed because the Invoke-target-key [com.xxxx.xxxxxx] has been used previously in a different package.

  No idea what the problem

  Once an application with an Invoke target key is signed, it is locked for this request (based on the name of the package) and signature counts.  Assuming that you have not tried to re - use the Invoke-target-key in a new application it looks like you created the new BlackBerry ID token with a different BlackBerry ID account as the original.

• Problem by invoking the process task on the update in the form of process field

  Hello world
  
  I extended LDAP ICF connector...
  I created the domain name like AccountOwner < search >
  I try to AccountOwner update creation process, but is not triggering the process task when the accountOwner field is changed
  This case invoking the task in process of update UD_LDAP_USR if any field changes in form
  Anyone has an idea on the problem of higher level
  Can give you some ideas why this was not the exception
  
  
  Kind regards
  
  Nana Gorrepati
  
  Published by: nanga Cormier on March 1, 2013 12:20

  You get only one or the other in this task you mention. If your process definition contains "Update UD_LDAP_USR" as a name for the task, it will still work to update any field. If you want tasks to run individually on a change, rename this task as "TEMP UD_LDAP_USR updated" so it does not fire.

  -Kevin

• Conditional navigation based on the process page

  Hello
  I need a page to be redirected to another page based on a PL/SQL code. (ie), the landing page is determined by the process of PL/SQL. How can this be achieved?
  Kind regards
  Vignesh

  Vignesh salvation,

  Create a branch of type 'DIRECTION on FUNCTION RETURN PAGE' on your page.

  Sunil Bhatia

• Should I buy a disc to reinstall Windows to fix all my computer problems based on the list below to start? Thank you. Any help welcome and appreciated.

  • my firewall will not turn an error message that says that my Windows Firewall on d/t / / service of Sharing (ICS) connection does not work correctly or is disabled.
  • I get error messages on my computer is in danger due to the McAfee needs attention and does not protect from my computer, then I check and it's good, or once and a while the real-time scanning enabled disabled or sometimes the firewall. I do not turn off these.
  • I get error messages from microsoft repeated that specifies the needs of microsoft windows to stop and I want to send an error message. Most of the time I send a.
  • I get the error message when you try to copy an album purchased from i-tunes, on a blank disc that something is wrong with my audio/video service does not properly or is not available.
  • I also learned today to buy or borrow a reinstallation of Windows XP Edition family drive, because I did not. I do? Help, please. Thank you.
  • The list is long, but it's for beginners. I don't have the money to take it to a store and need for some online business.

  Hello

  · What is the number and the model of the computer?

  · Were there any changes made on the computer before the show?

  · Who is the service pack installed?

  Check is it y of error codes and error message appears in Event Viewer: how to view and manage the event logs in Event Viewer in Windows XP: http://support.microsoft.com/kb/308427

  1. I suggest you try the steps listed in the link below: you cannot start the Windows Firewall service in Windows XP SP2: http://support.microsoft.com/kb/920074

  2 run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

• Link URL in BB7, BB10 devices control? (for applications based on the web)

  Context:

  -App companies (customers are members of staff)

  -App is based on the web - no hybrid or native application but a URL

  -URL is located within the company's intranet

  Question:

  Is it possible to order this URL on BB7 10 devices? For example:

  1. drag the URL as a logo on the screen of the device (like apps look)

  2 remove the URL (and related logo) from the screen of a user if needed (for example user is no longer can access web app)

  Thanks in advance!

  Leyden

  I think the feature you're looking for on BBOS's channel Push browser info to article 5 in this doc:

  http://docs.BlackBerry.com/en/developers/deliverables/12029/Push_applications_for_the_BlackBerry_Ent...

  This functionality does not exist for BlackBerry 10, so you will need to develop a shortcut app, info here (talking PlayBook but work for BlackBerry 10 devices):

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/how-to-create-a-URL-launching-AP...

• Printer skips lines and enlarged fonts between pages based on the web.

  bold text Range of printers HP c7200 connected wireless to MacBookPro w/Lion. Using the browser Firefox to version 9.0.1. Printer prints the first page very well, then the second page starts by skipping several lines and large print. PC connected to the same printer, and printer works OK. Safari works OK, too. Solutions would be appreciated.

  Problem started before the upgrade to Mac Lion. Lion updated printer driver. The same problem. Only happens when I try to print a web page or something downloaded from a web page, like a financial spreadsheet. Non-Web-based print OK. Help. Thank you.

  I saw this happen when the Page layout on FireFox browser has been set to 80% (or probably anything less than 100%). Make sure that the setting and change it to 100% and try printing again.

• utility based on the Web shows again the old version of the firmware - HELP PLEASE

  In September of last year, I replaced my old Linksys with a new (BEFSR41 ver 4.3).  I started to get in trouble yesterday, so I consulted the web-based utility and noticed that the window says: the firmware 2.0 version!

  I tried to update to the latest firmware available for my model, following the instructions on the site but something went wrong and the firmware has been altered. Finally, I managed to update the firmware via tftp utility, and he said that the upgrade has gone through. But the utility still shows the version of the firmware 2.0.  Under the router > status reads as follows:

  Capture (share.field_33_UI_share) Firmware Version: 2.00.4 build 7, January 20, 2010

  I am very confused. Which is the latest firmware or I get it confused with the 4.3 version number?

  I really hesitate to update the firmware again after the problems I had the first time.  If anyone can give me some advice on what to do, I would really appreciate it.

  You confuse the hardware version of the router with the version of the firmware.

  The BEFSR41 is the model. One physical versions of this model. Each version contains a different material. The exact hardware version is printed on the label under the router.

  The firmware version is the version of the firmware (software) running on the router. It is important that the firmware used is compatible with the hardware version of the router. For this reason, you must select the correct hardware on the router Linksys support download site version to be sure to choose the right firmware compatible with your router.

  The latest version of the firmware of the BEFSR41 v4.3 is Ver.2.00.4 Build 7. You have the latest firmware.

• WRT350N configuration based on the web does not load on the cable port.

  I've had this router for over 6 months, and only in the last two weeks, I could not access the configuration page based on the web through my PC, connected to one of the 4 wired ports. None of the laptops I tried (Win XP, Vista) are connected via Wi - Fi without a problem. Obviously, this isn't an emergency, because I can access it through the laptop, but I use mostly my PC to manage the router.

  Any ideas on other things to check?

  Thanks for the tip, but that did not work... However, trying to fix another problem, with the USB port of a storage drive, I re-load the updated firmware and am now able to access the configuration page. Still no action on the USB key if!

  Thanks again!

• Computer hangs when the video display based on the web

  I use Windows Vista.   When I view the videos on the web, I sometimes my computer crash.  It happens intermittently, perhaps one out of every 10 times I discovered a video and occurs with IE8 and Firefox.  I reinstalled the Flash player as it seemed at the time when it crashes flash videos of base.   Just before the crash to computer, I get a bunch of lines on the screen.  Video files and DVD that is not based on the web seems to play fine

  Hello
   
  1. do you remember any change before the question?
  2. What if the problem occurs on a particular Web site?
   
  Follow the steps below and see if they help.
   
  Step 1:
   
  I suggest you to disable the auto restart in case of system error and try to take note of the error message and reply with the exact error message. Once we have the exact error message that we will be in a better position to determine the exact nature of the problem and fix it.
   
  Follow the steps below to disable automatic restart on system failure:
   
  a. Click Start.
  b. type system in the search box after clicking on start. Choose system from the list of results.
  Note: If you see the classic view of the Control Panel, you will not see this link. Just double-click on the system icon and go to step d.
  c. click on the system link.
  d. in the left pane, click Advanced system settings.
  e. Locate the startup and recovery area and click on the settings button.
  f. in the startup and recovery window, locate and uncheck the box next to automatically restart.
  g. click OK in the startup and recovery window.
  h. click OK in the System Properties window.
   
  You can now close the system window.
   
  Subsequently, when the computer is lorsque l' ordinateur s' arrete stop the computer restarts automatically and you will receive the error message, make a note of it and post back.
   
  You can also open the event viewer and check if there are other significant error messages/codes. See the link below for more details:
   
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Step 2:
   
  If you don't have to update your display drivers yet, I suggest you Update your display drivers and check if the crash stops.
  Step 3:
  I suggest you put your computer in a clean boot State, and check if the problem persists. I suspect that there could be involvement of third-party software.
  Note: Follow step 7 to your computer as usual.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error: "this meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  Hello

  I have a problem with Live meeting 2007. I'm organizing a live meeting with people from different countries. Some of them cannot hear anything and can not use the microphone. They get this kind of error:

  "This meeting uses computer audio (VoIP), computer audio is not available with this console, which is based on the Web." To get the audio from the computer, please install the Microsoft Office Live Meeting client. »

  I tried to look for a solution, but I did not understand what Live Meeting I need to download.

  Can you help me?

  Thank you.

  Original title: Live Meeting 2007

  Hi Alex,

  Thanks for posting your query in Microsoft Community.

  I understand your concern. In this case, I suggest you refer to the Microsoft TechNet article following which sets out the series of frequently asked questions related to Live Meeting 2007 and check if the solutions are useful.

  FAQ: Live Meeting related topics media

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• When downloading an app from the trial of creative cloud app error ocured with the message "Download appers corrupted.please try to download again(-60), please provide a guide step by step to solve this problem."

  When downloading an app from the trial of creative cloud app error ocured with the message "Download appers corrupted.please try to download again(-60), please provide a guide step by step to solve this problem."

  Contact adobe support using a Web browser that accepts cookies and allows pop up windows, click here and as soon as it is available, click "still need help," https://helpx.adobe.com/contact.html

• Why are on the first web page are buttons and following pages Don t-shaped? All Pages are based on the same Masterpage.

  Hello

  I ve a problem with Muse.

  Why are on the first web page are buttons and following pages Don t-shaped? All Pages are based on the same Masterpage.

  Any ideas?

  Stefan

  Hello Stefan,

  Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

• Web page open based on the value of the text field

  I want to open a web page that is based on the value of a text field.  How to bind the value of a text field to a command which will open the web page?

  For example, the value of the text field is: 8 t - EXT

  and the web page I want to open when you press a button is: http://hqms/doc.asp?dn=8T-EXT

  As you can see that the 8 t - EXT is something that a person enters the form and is what is needed to open the web page.  The other text in the link of the webpage is always the same.

  Thank you

  Hello

  In the click event of the button, place the following JavaScript code:

  if (TextField1.rawValue !== null) {
       var vURL = "http://hqms/doc.asp?dn=" + TextField1.rawValue;
       app.launchURL(vURL, true);
  }
  else {
       app.alert("Dear user, please put a code in the text field. Thank you!");
  }
  

  You need to change the object references based on your shape.

  Niall