Consolidation, abandoned with the error (HFM)

Similar Questions

• My attempt to connect to hotmail fails with the error message "this domain Services have been abandoned.

  Hello

  My attempt to connect to hotmail account fails with the error message "this domain Services have been abandoned. The problem persists in all web browsers. I'm unable to open a session (* address email is removed from the privacy *) which I've used for more than ten years, and I can't afford to lose. The problem started today and I don't know that I ever change any setting in my PC.

  Can someone help me with the first note.
  Thank you.
  Raj Kishore
  E-mail address is removed from the privacy *.
  E-mail address is removed from the privacy *.

  Hi Rajkis,

  When you use Windows Live Hotmail and the problem you posted is with Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

  Windows Live Solution Center Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

  I hope this helps.

• I'm so fed up with the error message that adobe flash broke down.

  I'm so fed up with the error message that adobe flash plugin has crashed. You got two years, in order to solve this problem, and all your proposed solutions do not work. I see no alternative but to return to Internet Explorer. It's so frustrating when I check my emails and click on a link to get the same message over and over again. Why did this problem occurs only with Firefox? It is not the case with Internet Explorer and it is not the case with Google Chrome. Otherwise, Mozilla Firefox is great.

  This from Halofromsue copied here:

  Well as I said in my last post, yesterday I disabled Shockwave in Plugins. However, as you know, you need shockwave and flash for most things... so I went back and set it to say "ASK to ACTIVATE" so when a web page loads and he needs, he will ask, and then I will either say 'Yes' or ' ' and that seems to work. So far, after three hours, it has collapsed and shockwave/flash all work fine when she needs.

  Me: it works!

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• laptop snowleopard 10.6.8 tried to install applications of snowleopard 10.6 up endlessly with the error.  How can I get these applications on laptop

  laptop snowleopard 10.6.8 tried to install applications of snowleopard 10.6 provided with my imac up endlessly with the error.

  How can I get these apps on the laptop

  What applications and what is the error message?

• All security updates fail with the error A 80071, 91 code

  Hello!

  System information: Windows 7 Ultimate 64-bit, i7-720QM, 6 GB RAM, 256 GB SSD, ATI 4670 [Dell Studio XPS 1645]

  Background:

  • UAC was arrested. Turn on UAC stop my gadgets to work [another thread on these forums...].
  • A week ago, I got speech recognition works only with a local edition. Insert this ctfmon '=' CTFMON registry entry. EXE, to HKLM\Software\Microsoft\Windows\CurrentVersion\Run, fixed the problem. However, I can't find to this registry entry.
  • Four days ago, I had slow internet speed. I did a 'Complete' Microsoft Security Essentials scan and it found many exploits (Explot: Java/CVE-2009-3867.) BX, TrojanDownloader / OpenConnection.AK, TrojranDownloader:Java / Rexec.c and a dozen others). I removed all the. The internet speed is back to normal.
  • This morning, I have updated the firmware on my SSD to activate the TRIM. I restored an image of the drive I did with Windows Backup and Restore just before updating the drive.

  Problem:

  • I tried Windows Update after update of the SSD. It downloads all updates, installs, and prompts you to restart the computer to complete the installation. During the shutdown, some files are 'configured '. Upon restart, during the boot of Windows GUI (circles of flight), there is a break-up of the code, something about the registry. On logon, it gets "35%" and says so "returning default configuration updates,' or something like that. I get a notification indicating that the updates failed.
  • On Windows Update, only Silverlight, Windows malicious software removal, MSE definition updated and updated Office Publisher are successful.
  • All other updates (security updates, cumulative updates, security updates for IE, updates for Windows) fail with the error code A 80071, 91.
  • If you are looking for updates that fail, here they are: KB2416400, KB2296199, KB2305420, KB2385678, KB2423089, KB24236673, KB2442962, KB246759 and KB2443685.

  What I tried:

  • Disk Cleanup attempt (and unfortunately removed all restore points). Did not work.
  • Attempt to sfc/scannow. He found a few files, that it could not correct; I have the CBS.log newspaper if you need. However, updates still do not work.
  • Tried to reset the resource manager to file with "fsutil resource setautotest true c:\ ». She is successful. However, after the restart, the updates still do not work.
  • Tried a Full scan with MSE. No anomaly.
  • Tried to reset components to update Windows (using the Vista Fix - It via KB971058). Updates still do not work.
  • Attempt of Microsoft Malicious Software Removal Tool (updated dec 2010) Full Scan, no malicious software was detected. Updates still do not work.
  • Attempt of Anti-Malware analysis complete Malwarebyte, no malicious software found. Updates still do not work.

  I don't think that this is malware, but a Windows problem... My internet is wobbly for these last two days, a lot of packet loss (pages only "" half load, some missing frames, etc.). Not sure if this is related, but it downloads the updates very well. It is not always the marker "35%".

  I'm out of ideas. What's next?

  Thank you

  ~ Ibrahim ~.

  1. about 1 year, I installed MSE.

  2 McAfee has been preloaded; the subscription was updated (in a 90-day trial), and I uninstalled McAfee completely (regular uninstall and Removal Tool provided by McAfee).

  3. Yes, for about 30 minutes before I uninstalled and installed MSE.

  4. Yes.

  However, with a little help seven forums, we have figured out it is the registry. I did a reinstall and then the updates installed correctly.

  Thanks for the help, if! :)

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• BITS service fails with the error code 193: 0xc1

  Program update of Microsoft with Vista SP 2 is a failure with error code 80246008.  Looking at the forum it was suggested that the BITS service does not work so I check this service and it is not executed.  When I try to start it, it fails with the error message 193: 0xc1.

  The only suggestion I have for this fix is to reinstall Vista.  It is probably not necessary?

  Hello

  I suggest you follow the steps mentioned in the article below.

  You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start the Background Intelligent Transfer Service

  http://support.Microsoft.com/kb/916251

  If this does not help then I suggest you to download the update that is mentioned in the link given below and install it on the system.

  Update for Windows Vista (KB960568)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=d7ae9660-BB13-4F0C-816b-85de3980ec1b&displaylang=en

  Click the link below for more information about the Windows Update error.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  http://support.Microsoft.com/kb/956706

  Windows Update error 80246008

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Download works 9 KB2092914 security update and it fails with the error code 646

  Update of security for Works 9, KB2092914, downlaod fails with the error code 646

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.

• Could not open the page to update windows with the error 80072efe

  Could not open the page to update windows with the error 80072efe

  0x80072EFE - ERROR_INTERNET_CONNECTION_ABORTED - the connection with the server has been terminated.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  TaurArian [MVP] 2005-2010 - Update Services

• Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

  Windows colleagues for support.

  My windows install/windows update is broken; There will not be security critical update, installers fail with the error

  code 1, indicating a problem with language packs; I use widows 7 pro for software development.

  Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

  More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

  Hand, install the update package out of work.

  Your opinion is welcome. I have

  Hey Hey Hey Doc K whadu say?

  I solved my problem;

  the problem was owner and permission on my programs, all users, the program data and my programs (86).

  As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

  What have I done? I took possession of the special directories above from "TrustedInstaller".

  Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

  -What happened? Do you have a trusted Installer get stuck Mid-install?

  I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

  USER, AUTHENTICATED USER. I was perhaps too broad.

  I took possession, and then all of the repressed, updates windows are presented themselves to install,.

  and I expect /VERIFYNOW SFC before as I mark this as running.

  I'm fairly certain VS2008 and VS2010 now repair and install.

  Hmmm... always to see funny error message in SFC...

  We need a tool to give an overview of a directory tree ownership and permissions.

  dB

  Hey Hey Hey Doc K whadu say?

• my PC crashes with the error"SPCMDCON. "SYS at ADDRESS FBFE7617 base at FBFE5000 date: 3dbdd" any suggestions? that solve my problem

  Now PC crashes with the error"SPCMDCON. "SYS at ADDRESS FBFE7617 base at FBFE5000 date: 3dbdd" any suggestions? How to protect my pc and solve my problem and frequntly turn off my pc what I would do now?

  Hello

  When exactly do you get this error message?

  Perform a clean boot to verify if a third asks the origin of the problem.

  Refer to this article for help:
  http://support.Microsoft.com/kb/310353

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CallExtractFiles failed with the error 0x8007007e.

  I get the following when Truing error to run Microsoft Update: [error number: 0x8007007E]

  My windowsupdate log has the following entries:

  Notifications of recommended is disabled.
  2012-10-27 23:43:20:843 472 b5c Misc = logging initialized (build: 7.6.7600.256, tz:-0400) =.
  2012-10-27 23:43:20:843 472 Misc b5c = process: C:\Program may Explorer\IEXPLORE. EXE
  2012-10-27 23:43:20:843 472 Misc b5c = Module: C:\WINDOWS\system32\wuapi.dll
  2012-10-27 23:43:20:843 472 b5c COMAPI - COMAPI: IUpdateServiceManager::AddService -.
  2012-10-27 23:43:20:843 472 b5c COMAPI - ServiceId = {7971f918-a847-4430-9279-4a52d1efe18d}
  2012-10-27 23:43:20:843 472 b5c COMAPI - AuthorizationCabPath = C:\WINDOWS\SoftwareDistribution\AuthCabs\muauth.cab
  27-10-2012 23:43:20:859 2012 15 b 8 Misc validation signature for C:\WINDOWS\SoftwareDistribution\AuthCabs\Downloaded\7971f918-a847-4430-9279-4a52d1efe18d.auth.cab.temp\muauth.cab:
  27-10-2012 23:43:20:890 2012 15 b 8 Misc Microsoft signed: Yes
  27-10-2012 23:43:20:890 2012 15 b 8 Agent WARNING: CallExtractFiles failed with the error 0x8007007e.
  27-10-2012 23:43:20:890 2012 15 b 8 Agent WARNING: WU client omits CClientCallRecorder::AddService2 with the error 0x8007007e
  2012-10-27 23:43:20:890 472 b5c COMAPI WARNING: ISusInternal::AddService failed, hr = 8007007E
  2012-10-27 23:43:20:890 472 b5c COMAPI - exit code = 0x8007007E

  You have recently installed a Service Pack?

  This article mentions your error-

  http://support.Microsoft.com/kb/914232
  You may receive error code 0 x 80004005 and other error codes when you try to start a Windows XP-based computer

  in the opposite case

  Some users have cured the problem in restoring just the c:\windows\system32\wuapi.dll
  Click Start, select run, and type: regsvr32 c:\windows\system32\wuapi.dll
  Try Windows Update

  If none of the above, perhaps this article can help you.

  http://support.Microsoft.com/kb/831429

  Windows XP stops responding when you download updates from Windows Update

• Install RDCman 2.2 the use Remote Desktop on windows server 2003 fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  2.2 RDCman install remote desktop on windows 2003 server util fails with the error: incompatible version of c:\windows\system32\mstscax.dll

  CAN ANYONE HELP?

  Hi Mordi26:

  This could be because windows server 2003 is not updated with the latest version of the Terminal Server client. With terminal services client 6.0 update... It should solve the problem. Here is the link to download:

  http://www.Microsoft.com/downloads/en/confirmation.aspx?familyId=cc148041-577f-4201-B62C-d71adc98adb1&displaylang=en