I have to do anything after installing additional emory?

Similar Questions

• Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  Hi, I have a question. After installing this program in my (brand Asus k 4 table) the icon of my program its very small and I can not see all of the icons...

  What exact version of After Effects you are trying to use? 13.7.1 is?

• slot Memory 4 quit working after installing additional memory sticks

  I have a HP pavilion running XP media center a1440n 2005 with 1 GB of memory installed in the factory PC2-4300 (266 mhz) into the slot 1 & 3 (blue slots) total of 2 GB. I bought (2) sticks of memory PNY PC2-6400 and added 2 & 4 slots (black sites). Computer started and ran fine, checked CPU - Z and all memory displayed. I thought I could replace original with additional faster memory PC2-6400, since I realize that the unit will work on slower speed stick. To view before, I bought more memory, I got out of memory original slots 1 & 3 and replaced by the new memory. Computer would not boot. Has released the new memory and replaced with the original and the computer started. When I tried to install the new memory in slots 2 & 4, computer wouldn't boot. After changing the sticks and 2 & 4 memory slots checked OK but computer wouldn't boot with anything in the 4 Groove. For now, I use 3 & 1 GB in slots 1, 2, and the computer seems to work very well with all 3 assignment. I guess the slot 4 is shot, but why would the computer starts not with the new memory in ALS 1 & 3?

  Hello

  Try to clear the CMOS memory.  You can also try to remove the CMOS battery.

  Use a flashlight and visually inspect the slots for bent pins.

  I've seen this problem before and clear the CMOS usually solves the problem, but not always.

  Your best bet is to use a tool for major manufacturers such as Kingston, crucial or Corsair dimm to make sure that your have the correct DIMM and then followed by a call to the sales to make sure that you have chosen the correct DIMMS. I use sets matched across all DIMM slots to avoid compatibility problems.

  BTW, HP specifications only list PC2 - 6400 DIMM approved.  This can cause weird problems.

• HP Pavilion 763n automatically restart after installing additional memory

  I just installed more memory for my Compaq HP Pavilion 763n.  My operating system is Windows XP and the memory card, I bought 1 GB DDR - 266 (PC2100) Non - ECC Unbuffered 184-pin 2.5V CL = 2.5 64 X 8 memory.  When I installed the new memory, I restarted my PC - and everything worked fine, but the PC automatically restarts every 5 to 10 minutes.

  I installed the new memory card of 1 GB two ways - in the second location of memory (virgins) next to the original card of 512 MB, then I turned off the PC and installed the new card of 1 GB instead of the original card of 512 MB (I removed the card to origin), thinking that maybe the problem.

  It still restarts automatically every 5 to 10 minutes.  I now use the PC with the original sound of the memory only card, so the problem is certainly related to the installation of the memory card.

  Anyone has an idea why my PC is doing this and what to do?

  Thank you very much for all your comments!

  The Hynix used d ' award by OEMs and seems to be a good memory.  I'm not fallen on the Elpida brand.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

  Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

  You can find more details about it in this KB:

  3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

  And to keep a copy, here's more information:

  How to stop missing delivery Notification whenever I build an installer?

  Best regards

• After installing the version 36.0 whenever I go to a Web site, I get "server not found" and I have to refresh

  After installing the version 36.0 (yesterday) on the desktop and laptop, whenever I go to a site that I get "server not found" and I update the site to access.

  I checked my firewall and it is configured correctly.

  And I changed the proxy for 'no proxy '.

  Still not fixed.

  Thanks in advance.
  David

  I went back to the 35.0.1 version and it seems to have solved the problem.

• Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  Up to version 6.22 of entry and other components HTML texts have been with a width. Now, after installing version 7. The entries have increased in size not more about before defined sizes... You can fix this?

  I think it's about the size, just differently than before. See the discussion in:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=691157

• I am running XP and now I can't re - install after installing Windows8, I I get messsage that floppy drive could not be found, but I don't have a floppy drive.

  I want my XP back

  I am running XP and now I can't re - install after installing Windows8, I get I messsage that floppy drive could not be found, but I don't have a floppy and player despite the choice of boot from my cd rom and by disabling the floppy drive the same message at startup When I scan for my cd rom he sees them, but say that they do not function correctly, any ideas what is happening? They were fine before, my BIOS did not change to recognize my cd rom?

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• Impossible to get updates of Windows to work and cannot install anything after upgrading to SP3

  After the upgrade to SP3 I met many problems. Any time I go to install it I get a Windows Installer error is not installed (even if this is the case) and I have to go to start/run and type Services.msc and the go to the installer of windows and right-click on it and select start and then install what I was tring to do.  Windows Update will not update and I tried to restart the installer and it does not work.  I tried the auto fixes but cannot get them to work because they will not install either or will not run.  I had to uninstall Windows Defender as I am unable to update the definitions it is basically useless.  All this started after I did a full cleaning of the computer and then downloaded the original Windows XP that I bought from Dell.

  Try this:

  http://www.ehow.com/how_7176381_microsoft-install-after-installing-SP3.html

  I hope this helps.

• I have no sound after installing Windows XP.

  Audio... No sound!

  I formatted the hard drive and intalled win xp pro, now it tells me I have no audio device, please help!

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, starting with the card mother/chipset drivers,
  LAN, Audio, USB, SATA, etc, and so on.

  Note: If there is no XP driver listed, then your computer is not compatible Windows XP.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• I have no sound after installing Windows update security.

  Help, please! I don't have a solid any after that auto update installed some update Windows security. Not even system sounds work. I tried to use headphones too. I checked Device Manager and my Creative Vibra 128 sound card is enabled and working. I updated the driver for the card and the sound seemed to be coming back, but after the reboot, no sound again. My speakers have been tested separately on a different system and they worked very well. But I still have no sound coming out of my PC.

  DirectSound test results: failure at step 3 (DirectSoundCreate): HRESULT = 0 x 80004005 (failed generic)

  My system info:

  Name of the operating system Microsoft Windows XP Professional

  Version 5.1.2600 Service Pack 3 Build 2600

  Manufacturer of operating system Microsoft Corporation

  Name of the system *.

  System manufacturer VIAP4M

  AWRDACPI system model

  System Type X 86-based PC

  Processor x 86 family 15 model 1 Stepping 3 GenuineIntel ~ 1699 Mhz

  Version/Date BIOS Phoenix Technologies, LTD 6.00 PG, 18/07/03

  SMBIOS Version 2.2

  Windows C:\WINDOWS directory

  System directory C:\WINDOWS\system32

  Boot Device \Device\HarddiskVolume1

  Locale *.

  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).

  User name *.

  Time zone *.

  Total physical memory 1 024,00 MB

  Available physical memory 395,46 MB

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Page file space 2.33 GB

  Paging file C:\pagefile.sys

  It would be possible that the reason that your registry database seems to zero after the reboot is your antiviral is preventing to be changed when you update your drivers.  but this is only an idea unproven, but a possibility.

  in all cases, try to do a restore point for today / now.  This will take a snapshot of the current state of the system.

  Then, see if you can restore your computer state before the update that would have saved the drivers work and functional setup for your speaker system.

  my suggestion is to run a system via safe mode restore it if the anti viral theory is true, that it will not impede the process of restoring system in safe mode.

• After installing Visual Studio have not access to internet - error 651

  OK so I have windows 8 and after the installation of Visual Studio, I can't access the internet, I can connect to wifi but not internet. When I try to connect broadband I get error 651. Please help me I don't want to reset windows because of this.

  Original title: error 651

  Hi Antonio,.

  Are you using a 3^rd party antivirus application on your computer?

  Error 651 indicates the Modem (or another connection device) has reported an error. Refer to these steps in the order in which they are presented, and check.

  • Reset the TCP/IP settings.
  • If you are using a portable computer, make sure that the wireless switch or button is turned on.
  • Replace the RAS PPPoE driver:
    1. Open an administrator command prompt.
    2. Select all the code below, then right-click and click on copy:
    3. TAKEOWN /F "" C:\Windows\system32\drivers\raspppoe.sys".
       ICACLS "C:\Windows\system32\drivers\raspppoe.sys" / grant administrators: F
    4. Right click in the command prompt window, and then click on paste.
    5. Press ENTER.
    6. Once it is finished, close the command prompt.
    7. Go to the following folder:
       C:\Windows\System32\Drivers
    8. Rename the raspppoe.sys raspppoe2.sys
    9. Right-click on the following file and click on save target as / Save link as: old
       RAS PPPoE Driver.
    10. Save it in the folder C:\Windows\system32\drivers.
    11. Restart the computer.
  • If you use a Modem, get the latest driver.
  • Reset your router.
  • Re-install your network card drivers.

  Refer to the following for more information on reset TCP /IP.

  How to reset TCP/IP using the NetShell utility.

  http://support.Microsoft.com/kb/299357/en-us

  Wireless and wired network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   
  I suggest that power you cycling your Modem and router might solve the problem, here are the steps:

  1 save all your current work, close all open applications, then shut down your computer. Wait a minute.
  2. Firstly, turn off your router and wait a few minutes.
  3. turn off your modem.
  4. disconnect all the Ethernet cables are connected to the router and the modem and the PC.
  5. reconnect them and ensure that there is no connection drop between them.
  6. now, turn on your PC and let it boot.
  7. turn on the modem first and once it is initialized, switch on the router.

  For the Windows questions or issues, please get back to us. We are here to help you.

• Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

  Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

  Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

  Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.