Constant brightness screen Iconia A3 - A30

Similar Questions

• RAM can be added, or replaced on Iconia B3 - A30?

  Hi, is it possible to add or replace on Iconia B3 - A30? If so, how? Or, as the case to take to do?

  No, you can't.

  RAM is soldered to the motherboard and OS need to be customized too.

• I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 set up

  I have a aspire 5253, power watch normal bright screen with the logo Acer and F2 put in place down, but only for a few seconds, then it goes very dark, almost impossible to see what is on the screen, but there is something.

  I connect a monitor to the VGA connector and th PC works fine.

  I've updated the drivers, but it shows always available, as the main screen attached to the was'nt PC he all of a single screen

  to detect not to bring, and isentified on ly show 1 on both screens, PC built in display still very dark, like the backlight is not on

  reboot always perfect watch on the screen for a few seconds then dark

  Thanks for help

  by chance, I moved the cable button / stop for the Office and the screen turned on

  I checked the cable, it was slightly broken by the brokrn hinge

  I just had to cable and now it works fine

• Issue with the brightness screen Dell E6530

  Hello

  I have E6530 laptop with Windows 8.1. I have a problem with the brightness of the screen. Screen's brightness automatically almost always up and down adjustment. Not much, but enough that I noticed it and that is worrying. Is not serious if it is plugged or using the battery.

  I tried to disable the ambient light sensor (cannot find any setting in the bios for this) and I also disabled Windows 8.1 Adaptive brightness.

  Any ideas?

  I also noticed this. Especially when I change between a white and black interface, (Internet and WinAmp browser) that the screen automatically adjusts the brightness of the backlight. And I agree with that it is a little annoying because simply a difference worth noting.

  Edit:

  So I lived the settings in the control panel of Intel, and by disabling the option Display Power Saving Technology, it seemed to stop constant backlight lighting.

• want to 4-1112TX: could not set the brightness screen & long power

  Hi, now I use HP ENVY ultrabook TX 4-1112

  I installed win 8.1 to win 10

  any driver has been installed correctly (there no problem in the Device Manager list)

  my problems are:

  -I could not find where I can adjust brightness of the screen, the shortcut key (f2 and f3) without effect.

  -It was perfectly working in 8.1 existing

  -time to market windows / stop take too long. It seems not intel rapid stoarge technology does not work.

  so, can anyone help? because of many ways to solve (from google) does not work.

  Thank you.

  Hi @AgungEnvy,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the brightness keys and slow start and stop. I'll be happy to help you.

  HP provides no driver for Windows 10 with this computer. You can try to install the window 8.1 graphics driver Intel high definition (HD). This may activate the brightness function keys.

  You can restore the previous operating system if Windows 10 is too slow for the computer.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Cannot adjust brightness screen on Satellite Pro L650

  Hello
  I am running Windows 7 64 bit on my Toshiba Satellite Pro L650 and I cannot adjust the brightness of the screen. Fn + F6 key and Fn + F7 do not work and there is no entry for it in the control panel.
  I tried to download drivers VAP 1.4.1 as explained in Toshiba newsletter help, but there was no need for this template.

  Could you please help me with this?
  Thank you
  Stone

  Are you using the original OS that you got with your laptop or your own installation of the OS?

  As far as I know it should work with the settings. If you have changed something?
  You can use other fnctions FN?

• Impossible to change the bright screen on Satellite Pro C50-A-143

  I run windows 8.1 and I could not change the brightness of the screen for a while now.

  It happened a few months before, but after a random number of days that it worked again, now it is stuck in about 60% bright max, which is not enough when the sun comes through the window.

  According to the Toshiba Satellite Pro C50-A-143 datasheet this laptop has been preloaded with Win 7 64 bit and Win additional 8.1 own drive was part of the package.
  I assume that you have installed own 8.1 win but have not installed all the drivers Toshiba win 8.1.

  Is this correct?

  Visit the page of the Toshiba UE driver, install all the drivers, tools and utilities (graphic card drivers display tool, driver Toshiba system, etc.)
  Utility function key Toshiba is very important if it is to use the key function (Fn, F1-10)

  Then you should be able to use the function key to decrease and increase the brightness of the display.

• Cannot use the settings of brightness screen on Satellite U205

  Hello

  I have a Satellite U205-S5002, and the screen is still too dark to see. There is no way to make it more bright, and even when I press [FN] + [F7] key, it is not brighten up.

  Any ideas?

  Hello

  Maybe the brightness of the display has already been set at max!

  Are you sure that there is no hardware malfunction?
  For example in case of malfunction the brightness of the screen FL inverter breaks down.

  You see no difference in brightness between the screen and the Toshiba startup splash screen after logging in windows?

  About you model number; It seems that this Satellite A205 unit was designed for the American market.
  All Toshiba drivers and tools need to be downloaded from the Toshiba page we!

  If the faulty software causes this display problem, I would recommend refreshing drivers and tools.

• ProBook 4530 s: cannot delete the HP volume/brightness screen displays

  Hi, as the title suggests, I want to remove the displays on-screen volume/brightness/capslock/numlock on my laptop
  
  Short story about what happened from my side, I got my laptop 3 years ago and the display screens were not there, until I reformatted my laptop a few months ago to windows 7 Professional (a win7 Ultimate) and the screen came with it, now I'm on windows 10 and they are still there
  
  Major problem I have with them are the fairly high FPS drop they cause, not to mention those bugs

  I looked in the forums of hp for solutions and nothing will not work:
  HP Quicktouch/tauch missing
  HP MediaSmart Smart menu is missing also
  Revo uninstaller did not find anything about this is mentioned in the forums
  
  Thanks for the help

  I have never seen or met.

  I've seen similar, as in games or overlays of user interface overlays. You have installed a program to show that?  Check in your "hidden icons", down to your left. Y at - it an icon which shows, if so can "out you"?  Is it in the Control Panel, all programs that say "overlay" or something?

  The last thing that I can say, go to the Task Manager and go to the Startup tab. Is there something in there that can refer to a display on?

  If none of them are successful, I will continue to look more deeply into it.

• Keys of brightness screen Qosmio G30

  When I turn on my G30 I get the following message "'THotkey' recovery has no code error 0 x 00031402, 0 x 00000002" and the brightness of the screen and F6 keys do not work. A Google search gives several options, but nothing very clear on what to do and I'm looking for help please.

  Hello

  The problem could be related to Toshiba Hotkey Utility, which is stopped working.

  Are you using XP?

  If Yes, then you should reinstalled firstly the common Module, then the Hotkey utilities for display devices

  Of course, these tools are only compatible with XP.
  So if you use another OS like XP, you need to reinstall any other software from Toshiba.

• Satellite A300 - too bright screen and lack of contrast

  Is it irritates me immensely

  No matter what I do, there seems to be no way to add contrast and reduce the brightness of the screen on my laptop.
  For example, blacks show that blacks... just slight shades of gray

  I am a photographer, I like my photos and display to be precise for the colors I see in real life, so I can change them accordingly. but rather... the screen seems just washed out, more exposed, and it hurts me ' eyes!

  I tried to adjust the contrast and brightness manually by going to graphic properties, but even with the settings below, the remains of the screen bright and washed out.

  is there something I can do?
  any help would be greatly appreciated.

  That's the problem with the LCD screen. Due to the lighting, it is difficult to block all of the light using liquid crystals.

  OLED plasma and CRT screens do not have this problem. So if you want the best possible image contrast, you may buy one of these types of monitor and use it via the VGA port.

• Qosmio X 500-11 G - not bright screen

  Hi guys

  Two days ago, I purchased a Qosmio X 500-11 G of 1920 x 1080 Full HD, but I see that the images on the screen are not as brilliant as I expected. No idea how to tackle that?
  I tried F6/F7 but doesn't have much of a difference.

  THX/Red

  Hi theredkid,

  Hmm... Usually, you can change the brightness of the display by using the FN + F6/F7 key combination. More a high-brightness of the screen should be more than enough to see everything correctly.
  You have tested and you use Windows preinstalled?

  You can also play with the Windows color management settings. There you have various settings like contrast, gamma, etc.

  Check this box!

• Increases brightness screen Satellite P200-1EE

  Hello, I received by Satellite P200-1EE with Windows Vista Home Premium.

  Some time ago I found that the screen itself become very bright. Usually after one or two hours, sometimes faster after coming back from the screen saver. Yet it's brighter, then I can set up using windows options or functional keys, I see not too much on the screen then. What can cause this problem?

  I hope that there is no hardware problem. Help, please.

  Hello

  This means that the brightness of the display will change automatically?

  Well, it's really hard to say why this is happening. Normally, you set a certain point for the brightness of the screen in each power profile, for example, symmetrical or optimized battery.
  Check it!

  Also, make sure that all Windows updates are installed.
  In addition, I would recommend updating BIOS. You can find it on the Toshiba site.

  Good bye

• Option saver battery but with a brighter screen for 1050F?

  Is it possible to set up the Yoga 2 10 1050F so that the battery saver option can reduce unnecessary programs running in the background, BUT, at the same time... have a brigher screen? Who feels like watching a totally tarnished down/faded screen just to get the benefit of stop unnecessary programs from running in the background? I know that I don't have.

  Manager of the bottom app in the settings in the power manager. Control through your custom display settings brightness. Should work.

• Brightness screen Flexview T42p

  I just received my T42p (2373-C96) of IBM refurbed the other day. (To experience FlexView!) The machine is a refurb, no doubt about that. Small scratch cover, used battery, DVD player which took the region reset several times already. But the screen is what worries me. It's just not as bright as any of the other the GST, I own. Is this normal for FlexViews? Shadows Ghost in the lower corners are almost an inch in height, more, much larger than any other of my GST. Is reduced brightness and shadow ghosts more indicative of a FlexView display who is on its way?

  It's very subjective, I understand, but is it normal for a FlexView? How difficult it will be to get this replaced, because it is a subjective matter? I'm still in my return period of 7 days.

  Thanks for your expert advice.