Constraints and values in the form in the VRA Designer

Similar Questions

• Display the names and values of the parameters in the node parameter of forms

  Hello
  
  Is it possible to loopback programmatically via the node parameter forms get the name and value of each parameter. I don't know the name of the individual parameters in advance. I want to display the parameter names and values on a help screen generic as each of our reference forms.
  
  I could do somewhat similar code to display all names of block in a first_block get_form_property property and nextblock property get_block_property is formed. I can't think in the same way as the parameter names and the values of the list if.
  
  Any suggestions would be welcome.
  
  Thank you
  
  Neil

  No, there is no standard built-in to browse Forms settings.

  François

• Name of the PK, unique constraints and to support the index

  I want to have my primary key constraint and index support share of the same name, IE:

  CREATE UNIQUE INDEX MYTABLE_PK ON MYTABLE(...);
  ALTER TABLE MYTABLE ADD CONSTRAINT MYTABLE_PK PRIMARY KEY(...);

  Without definition explicit a unique index using the relational model, the generated DDL added 'X' for the name of the index:

  CREATE UNIQUE INDEX MYTABLE_PKX ON MYTABLE(...);
  ALTER TABLE MYTABLE ADD CONSTRAINT MYTABLE_PK PRIMARY KEY(...);

  I tried to add an index unique explicit to the table, but he changed the name (adds "v1") when I leave the table editor:

  CREATE UNIQUE INDEX MYTABLE_PKv1 ON MYTABLE(...);
  ALTER TABLE MYTABLE ADD CONSTRAINT MYTABLE_PK PRIMARY KEY(...);

  I have the same problem with index & unique constraints.
  
  Issues related to the:
  Can I generate DDL with name matching? "v1" thing seems unlikely, he doesn't want not myself save the definition as I want.
  Where are the transformations of naming for this location? I found tools, preferences, and Data Modeling/naming Standards/Templates but this nugget does nto seem to be there.
  
  Thank you.

  Hi Mike,.

  The Production data release model 3.1 has been updated to allow constraints unique and primary and their indexes share the same name.

  David

• Bug? Photo ring String property and values' returns the error 1054 in LV 8.5

  

  This property must exist for a ring photo?

  Ben

  James W wrote:

  I take it from what I read here that there as no way to programmatically update the values of a ring of photo running then?

  ...

  You are right that a RING of photo may not be populated at run time. On the other hand an image can be updated.

  This thread has many links to examples of photo.

  These tags can also help start with the photo of LV.

  Have fun!

  Ben

• fonts in different fonts in Live View and preview of the browser Design view

  My external style sheet has the body defined for a sans serif font and there is nothing to contradict in HTML documents. But while I get sans serif in Design mode (as you know), I get a font serif in Live View and browser preview, not to mention on the Web itself.

  How is this possible (and what I would do to this topic)?

  -Paul

  The problem is in default.css. You have this:

  font: Verdana, Geneva, sans-serif;
  

  The shorthand font property requires a font size. It cannot be only the definitions of the family of police. Change to this:

  font-family: Verdana, Geneva, sans-serif;
  

  Fashion Design is not 100% reliable when it comes to CSS rendering.

• Send the name and the value of the control to Subvi

  Hi all

  I am trying to send the names and values of the controls to a Subvi.

  I know that I can check out the name and the value of the control by using a property node, but I was looking for a way to make is easy for the programmer to use.

  I think some sort of bundle function, it records the name and the value of the control, but I would like the programmer to be able to connect a random number

  controls to the Subvi without having to specify the number of controls Anywhere.

  I know there is stuff in labview configuration file, but it seems a bit more complex, so what I want to do.

  Also, I know that I can use the OpenG toolkit, but I will not use additional LabVIEW modules, as this VI may run on several different computers.

  I hope I made my problem clear enough!

  Good day

  Concerning

  Tommy

  What, creating an array of references to the command.  On the hand, you will need to fill the table with control references that you want to send to the Subvi.  In the Subvi, use a loop For with indexing to get every reference, and then use the nodes property to get the name and value.

• can I have non sequential values in the round of menu?

  I create rings of menu which are intended to replace what has been a hexadecimal numeric field.

  The definition of registry itself is one thing for a long time within our FPGA and out of my hands.  So let's say it is a field of 2 bits set as follows:

  B00: not used

  B01: CRC-WE

  B10: not used

  B11: CRC-OFF

  So I want my menu ring to have only the CRC WE and CRC-OFF options, but so far the only way I see to do this is to create also 2 unused fields, because I can not change the values manually in the properties of menu ring.  I don't want 2 'empty options' is displayed on the menu ring.

  I also tried the enum ring but he wanted too things sequentially.  What do I have to use a different type of control, or what I need to add code that translates the value selected in the ring of menu the value I want?

  You should be able to have only two options you want in the menu ring. Right click on the control of the ring and choosing "edit items...". ", you should get a dialog box with a table and values of the elements. If you uncheck the box 'Sequential values', you can then change the values associated with these elements.

  

• Type cast using the Console Design

  Hi all
  
  I am using the function java.util.Hastable.put (key, value) using the OIM design console. The function expects two objects as parameters to the card. I want to map a string to a string. While the string is a subclass of the object, IOM design concole does no direct mapping. Variables of type other object will simply not available in the menu dropdown.
  
  Q: How have the input parameters when the expected type is a superclass of the real parameters, using the console of design ?
  
  Kind regards
  
  Jan Willem

  There are com.thortech.xl.util.adapters.tcUtilHashTableOperations utilities that can help you to create and add values in a hash table. You can find the documentation in the java docs included in the location SDK\javadocs\util.

  -Kevin

• How to apply the physical design

  Dear all,

  I use Apex 5.0 and I downloaded materials from this URL: https://github.com/vincentmorneau/material-apex

  But I don't know how to put the css and js files.

  Best regards

  Hi OraDev,

  Now, if you are creating a new application with the theme of hardware design you will get ugly page without css and js:

  

  So, where are the css and js for the theme "design material". The answer is that they are in shared components-> static files request for application of the 'APEX material':

  

  Go to "Hardware APEX" application->-> static files of the Application, shared components, and then click 'download as Zip '.

  Go to your theme of created/switched demand to "101. Hardware design'->-> static files of the Application, the shared components and download the above downloaded zip file as follows (keep the flag file unzip it as 'Yes'):

  

  If you recharge now, your always the theme of hardware design application is not loaded. The reason is the css/js references in the theme. You can consult the following references If you go in the app-> shared-> themes components-> change theme "Physical design" then you find next references css/js:

  

  Now, what is this "& PATH.". The answer is the chain of Substitution defined in the application. You will find this substitution string defined in application of the 'APEX material"->-> Application definition attributes, components that are shared-> section of Substitutions as follows:

  

  Set the substitution string 'PATH' in your application (even as an application "APEX material"). Now reload the application page! You will find the theme of responsible hardware design.

  

  After the application of the "APEX material" in my workspace on apex.oracle.com: https://apex.oracle.com/pls/apex/f?p=45241:1

  Here is the 'Hardware Design Demo' application I built with above mentioned changes: https://apex.oracle.com/pls/apex/f?p=62930:1

  NOTE: Ideally, you should deploy the theme css/js/images on the webserver instead of load to the shared application components. Css/js/images loading depend on the web server you are using. After loading this web server, you need to change references in the theme of the workspace accordingly. So, you don't have to download the theme css/js/images whenever you create a new application with the theme of the hardware design or spend you your theme from application to the theme of the hardware design.

  I hope this helps!

  Kind regards

  Kiran

• Tabular form and the value of the element

  Hello people:

  I certainly hope that your holidays are festive.

  I have a question for you.

  I have a tabular form which is filled, based on a list of selection (with the type of delivery).  I placed a form on the same page (based on a table), and I would for a question to be filled as well following the list of selection even completing the tabular form.  What is the best way to go about this?  Calculation?  I'm not sure how to do this...

  Thanks for your help!

  Aqua

  AquaNX4 wrote:

  I have a tabular form which is filled, based on a list of selection (with the type of delivery).  I placed a form on the same page (based on a table), and I would for a question to be filled as well following the list of selection even completing the tabular form.  What is the best way to go about this?  Calculation?  I'm not sure how to do this...

  If the selection list submits the page then you can set the value of the element using a calculation after the presents. Make sure that it will not be reset by any statement of process or branch of State later clear session.

• I am defining a recordset and he asked me a test value for the variable in form, anyone can tell me what variables would look like?

  

  In your illustration, he indicates that there should be a form variable which passes the value to the query. For example, if there is an input field

  Then, when the form is submitted, it will pass the value to the query.

  When you test the query in Dreamweaver, this value is unknown, where the question. Simply a response with a value and everything's fine.

• Hello experts, I use Adobe forms in SAP. My question is, is there a any restriction for additem keyword in JavaScript? I mean, even if I use the keyword additem to add the name and value of a drop-down list, it adds up to 10000 files only. Please s

  Hello experts,

  I use Adobe Forms in SAP.

  My question is, is there a any restriction for additem keyword in JavaScript?

  I mean, even if I use the keyword additem to add the name and value of a drop-down list, it adds up to 10000 files only.

  Please sugest

  A drop-down list is the bad INTERFACE design where an element can contain more than 100 entries. It is very good in tests, but absolutely unacceptable if the form must be used by a person busy doing their work. The choice of Acrobat forms are limited, but consider a list box. Despite this, there may be limits imposed by the system or the implementation.

  Better would be

  (a) stop filling after awhile the list and add an entry saying several elements not shown, running report or use better filter

  (b) be available for all filtering of course lists

• Form Validation failure: "value is not a date and time in the format"

  Hello world

  I am facing a weird problem in my custom OAF page. I'm displaying the records of a particular table through dynamic VO and dynamic array. All records appear correctly. But when I try to click on NEXT 10 records in a table, I get the error like "FAILED FORM VALIDATION: 1000 ORG CUST BO VERSION is not a date and time in the format. Just like in the screenshot below.

  

  Strange part of the question, if I select the columns to display not related to this day, so I only am not facing problems. If I select only dates to display and also am not facing this problem. If I use the mixture of this type varchar2 and data, I get this error.

  I tried to change the type of data but no use.

  If we close, look at the PARTY_ID error message trying to copy its data to ORG_CUST_BO_VERSION the last column. Why what's happening clue me less. Can anyone guide me on this please?

  The problem is that you use the same name for the creation of the MessageTextInputBean inside the Table.

  The name of MessageTextInputBean make it dynamic.

  ex: -.

  OAMessageTextInputBean oamessage = (OAMessageTextInputBean) createWebBean (pageContext,

  MESSAGE_TEXT_INPUT_BEAN,

  NULL,

  'text' + columnNo);

  See you soon

  AJ

• the value of pan and zoom of the time constraints?

  PE10 using - I have a photo image that is attached to a total (hold time) that I want, I want add pan and zoom effects to it with back change the span of the image on the timeline. Is there a way to tell the first elements to force the pan aggregtate and unavailability zoom times not to go beyond the original image?

  To clarify, I had an image that held for the correct duration, but when I was sleeping w/pan and zoom, I found that I had extended the duration of the image, while it was now about 5 times longer that it should have been, and he threw all my other pictures to the bottom of the timeline. I like to keep the fixed duration without having to pull out my calculator and stopwatch.

  Thank you (just learning this...)

  calpolyjeff wrote:

  When I was sleeping w/pan and zoom, I found that I had extended the duration of the image, while it was now about 5 times longer that it should have been

  You must watch the landmarks of Pan & Zoom tool in the image and changes with the timeline when working in the tool. As you add / move / delete your frames you will change the elements of duration - the time to hold and the Pan.

  In the example below, my time to Pan between part one and part two is sixteen seconds. You can change this by clicking on the time of pan and enter a duration. The other times I've highlighted is is the second a downtime for two framework. Again you can change it by clicking on it. You can also see the time to stand for a framework to the second five point on the timeline itself.

  

  Hope this helps,

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

• Display the name of the tag as the column name and the value in the tag as a row of data from the input string.

  Hi Forum members,

  I am looking for a query display the name of the tag as the column name and the value in the tag as a row of data.

  I have to print the values within the tag to a file by choosing the value of the flags. the sequence of the tags will vary each time, as the tag name will change dynamically.

  So here is the example of input data and the expected output. The string in the text column must be separated as the column names and values.

  Input data
  Select 1 as seqno,' < > 0210A 50 4f < / 4f > < 5f20 > TEST CARD 16 < / 5f20 > < 5f2a > < / 5f2a > < 82 > 1 c 00 < / 82 > ' double text

  
  Output:

  Seqno 4f 5f20 5f2a 82
  0210A 50 16 1 00 TEST CARD 1

  Please help me by providing your entries on this.

  We use the version of Oracle 11.2.

  Note: This is not the XML string

  Thank you

  Shree

  with

  data in the form of

  (select 1 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2a><82>00 1' text of all the double union)

  Select 2 as seqno,'XYZ<4F>0210 A 50<5f20>TEST CARD 16<5f2a><82>00 1' text of all the double union

  Select 3 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2A><82>1 00XYZ ' text of all the double union

  Select option 4 as seqno,'<4F>0210 A 50<5F20>TEST CARD 16<5f2A><82>1 00XYZ' double text

  )

  Select d.seqno, x.*

  d the data,

  XMLTable ('/ root')

  by the way xmltransform (xmltype ('': replace (replace (text,'<><>'),)))

  XmlType (q'~http://www.w3.org/1999/XSL/Transform "version ="1.0"> ")

                                                   

                                                     

                                                       

                                                     

                                                   

                                                   

                                                     

                                                       

                                                     

                                                   

  ~'

  )

  )

  path of columns '4f' varchar2 (10) "tag4f."

  path of "5f20' varchar2 (30)"tag5f20. "

  path of '5f2a' varchar2 (10) "tag5f2a."

  path of varchar2 (10) "82" "tag82.

  ) x

  
  

  SEQNO	4f	5f20	5f2a	82
  1	0210A 50	16 TEST CARD	-	1 00
  2	0210A 50	16 TEST CARD	-	1 00
  3	0210A 50	16 TEST CARD	-	1 00
  4	0210A 50	16 TEST CARD	-	1 00

  with

  data in the form of

  (select 1 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2a><82>00 1' text of all the double union)

  Select 2 as seqno,'XYZ<4F>0210 A 50<5f20>TEST CARD 16<5f2a><82>00 1' text of all the double union

  Select 3 as seqno,'<4f>0210 A 50<5f20>TEST CARD 16<5F2A><82>1 00XYZ ' text of all the double union

  Select option 4 as seqno,'<4F>0210 A 50<5F20>TEST CARD 16<5f2A><82>1 00XYZ' double text

  ),

  Chopper (seqno, Key, value, String) as

  (select seqno,

  regexp_substr (text,'<(.+?)>', 1, 1, null, 1),

  regexp_substr (Text,'>(.*?))

  regexp_substr (text,'<.+?>. *? ) (.*) $', 1, 1, null, 1). » <>'

  from the data

  Union of all the

  Select seqno,

  regexp_substr (String,'<(.+?)>', 1, 1, null, 1),

  regexp_substr (String,'>(.*?))

  regexp_substr (String,'<.+?>. *? ) (.*) $', 1, 1, null, 1)

  Chopper

  where regexp_substr (string,'<(.*?)>', 1, 1, null, 1) is not null

  )

  Select '4f', seqno, '5f2a', '82', '5f20.

  of (seqno, lower (key) select key, value)

  Chopper

  )

  Pivot (max (value) for key in ('4f' as '4f', '5f20' as '5f20', '5f2a' as '5f2a', "82" as "82"))

  Concerning

  Etbin