Type cast using the Console Design

Similar Questions

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.

• I need to stop windows to install the IR Transmitter/Receiver when I reboot so I can use the console for Fallout New Vegas

  To use the console or a cheat mode on Fallout New Vegas, I need to uninstall my infrared transceiver. When I do that, I have to restart the computer for the changes to take effect. Once I reboot, windows pops up a window saying that it has installed new drivers. Happens if fast, I can not open the game before the pilot completed the installation. Help!

  Hello

   
  If you want the windows do not install the infrared transmitter when Windows restarts you can remove the connection of the transceiver to the computer or try to disable it in Device Manager. You may consult:
  
  (a) open Manager devices by clicking the Start button, click Control Panel, click System and security, and then, under system, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  
  (b) search for the device transmitter/receiver IR, right click on the device and turn off.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
   
  For more information about the game, I suggest you to contact game provider support site.
  http://fallout.bethsoft.com/eng/games/FNV-overview.html

• How to open the console design

  Hello friends am new on oim 11g
  I just finished with the facilities (wls, IOM, etc.)
  I created a user with connector gtc (only reconciliation) now I want to generate Email user id based on his first name and family name
  people me to go console fo design, suggesting how to go to console design and generate email identification.
  
  Please help me with the above query
  
  Thans in advance

  Use the following steps to create a file wlfullclient.jar for a client application to JDK 1.6:

  Replace the directories in the server/lib directory.
  CD WL_HOME/server/lib
  Use the following command to create wlfullclient.jar in server/lib directory:
  java-jar wljarbuilder.jar

  Now copy this file jar to the Oracle_IDM1/designconsole/ext folder

  After that, go to the folder Oracle_IDM/designconsole

  and run the xlclient.bat file, it will launch the console design.

  HTH

• Did not look up the definition in the Console Design

  I installed Microsoft Active Directory Connector and then given the parameter to it when I tested it using the diagnostic dashboard, it passed with success... but when I connect on the Console of design for the definition of research Lookup.AD.Configuration configuration before you run the layout... I'm unable to find and open the definition of research Lookup.AD.Configuration in Administration-> Lookup definition...
  
  I installed the Console design on the same Machine where I installed the server of the IOM.

  If you are unable to get the details of the journal. do one thing.

  Open the form of the process and remove the group from the shape of the child.
  Save the form and try again create user task

  Even check the value of the organization. Check in the AD. and even fill in the search of the AD.

  Kind regards
  Mireille Nayan

• MDS-01401: fails to update the configuration by using the console of B2B

  Hello expert B2B.
  I get the following error applied changes to TP using the console of B2B. I checked the log and it give me any more information than that below. I restarted two weblogic soa breaks, and yet it is to launch the same error.
  
  MDS-01401: update of a node in a single document "/ soa/b2b/tp_MyCompany.xml" with another document node "/ soa/b2b/tp_MyCompany.xml.bak" is not allowed.
  
  ADF_FACES-60097: for more information, please consult the error log of the server for an entry beginning with: 60096-ADF_FACES: server during the PPR, #39 Exception
  
  
  Any ideas on this one?
  
  Thanks in advance!

  I doubt that the B2B repository has been corrupted. Take export from the repository, purge the existing design time repository, restart the server and then import it again. If this does not work, lift a SR with support. You can consider diffusion through your repository B2B export to my id.

  Kind regards
  Anuj

• BEA-494002: the current role of the connection is not allowed to use the console

  Versions of the product:
  SOA Suite 11.1.1.4
  WebLogic Server 10.3.4
  
  I create a domain template using model of Fusion Middleware domain generator (< MIDDLEWARE_HOME > \wlserver_10.3\common\bin\config_builder.cmd) with release template.jar
  Characteristics of the source domain:
  -Domain OSB (Oracle Service Bus)
  -a managed server
  -mode of development
  -jrockit JVM
  
  
  When I create a new field using template.jar, start admin server and try to access sbconsole, the lancers of error to follow:
  < 7 July 2011 14:02:45 BRT > < error > < ALSB Console > < BEA-494002 > < internal error occurred in OSBConsole: the current role of the connection is not allowed to use the console action: ' / StatusMessages ' com.bea.alsb.console.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / StatusMessages.
  at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:88)
  at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
  at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
  at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
  Truncated. check the log file full stacktrace
  >
  
  Any idea?

  It is an old bug. This bug would be fixed with ALSB 3.0 :)

  Problem: Model ALSB 2.6 Builder does not include certain security files

  Applies to:
  Oracle Service Bus - Version: 2.6 and later versions [Release: Aqualogic Service Bus and later]
  Information in this document applies to any platform.

  Symptoms
  When a model is built from an existing default values area, the JAR file is the following security files:

  DefaultAuthorizerInit.ldift
  XACMLAuthorizerInit.ldift

  So if a new domain is created with the model, sbconsole throws an access control security errors.
  A similar problem occurs when you are using WLST to clone an existing domain.
  When you access the service bus console, he doesn't know that the 'weblogic' default user has administrator permissions.

  You receive the following exception:
  Throwable: com.bea.wli.common.base.SBConsoleAccessException:
  The current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.

  Stack trace:
  com.bea.wli.common.base.SBConsoleAccessException: the current role of the connection is not allowed to use the console action: ' / viewAlertSummary '.
  at com.bea.wli.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:73)

  Cause
  Security policy files that exist in the area were not being grouped in the domain model when you use Model Designer.
  Therefore, the default server policy files were used which are not applicable for ALSB areas.

  Solution
  You can implement the following workaround solution:

  with model generator:
  Ensure that the authorized person of the domain policy files are grouped in the model. This will cause these files to be extracted in the areas newly created (using the template). All new domain ALSB will be ALSB security policy files.

  UN - jar, the template.jar file.
  Copy the two files .ldift of the domain that you used to create the template and paste them into the safety record of the contents of the jar file.
  Re - jar file template.jar and create a domain using the template.

  with WLST:
  While cloning a copy existing domain missing files from the domain you created in the directory of your new domain security.

  Products
  --------------------------------------------------------------------------------
  Middleware > SOA > Oracle Service Bus > Oracle Service Bus

• Tecra A9 - sometimes I can not type - click using the touch pad

  There are times that I can not type - click using the touch pad or other keys (all of a sudden without any reason)

  I can move the cursor in this case but not tap - click here to be able to click once again, I have to restart (this happens on both windows and linux)

  On windows, I press alt + ctrl + del and when the Task Manager window I can tap it and after I do I can tap - Select something else and so on.
  Click on the Task Manager click on anything else until I reboot and the problem goes away just to appear suddenly unexpectadly at the same time.

  I have the newest bios and driver accupoint

  Any tips?

  This happens only with touchpad, or when you use an external USB mouse?
  For me it looks more like the Windows operating system freezes for a short period. Is this good?

• Any creative ways to prevent some users from always using the console?

  Our Organization strives to encourage people to use RDP to access servers, but also provides the use of the console as a backup.  We want users to use the console as sparingly as possible.  Any suggestions on ways that allow the use of the console but make sure users will choose RDP on the console?  Perhaps bringing to logout the user after a period of time?

  My first reaction is of course the sharks with laser beams on their heads but I don't understand how this can cause logistical and budgetary problems. My second idea would be to only allow access to the consoles of a jumpbox they also RDP. So I guess that users would acquiesce to all RDP'ing to the box, that they wanted to administer anyway rather than the double jump, but give them the Console in case there was a situation of emergency or clear need.

• Could not start the console design

  Hello
  I installed successfully OIM 11 g and that you have configured the IOM server and console Design, I'm still can't start the console design as well as the server of the IOM on the 14000 thousand port. In fact, I see no error in the configuration. Can someone please suggest me a solution?
  Thanks in advance for the help.
  
  Thank you and best regards,
  Prasad

  Restart your server once and check...

  not even check the listening port number-> environment-> servers Weblogic managed server

• Change the DB connector via the console design

  Hello
  
  I installed the DB connector with the GTC feature in IOM 9.1.0.2. No change is required for reconciliation and it works very well, how ever, I need to reach my own adapter for the provision of a new user. Is it well if I'm going to change the definition of process via the console design, since Oracle and Oracle support documentation we ask is not to change the connector through the console of design? In addition, this connector can be exported and imported as the rest of the connectors or what I create in each new environment?
  
  Thank you
  PETREA

  It will work, but if you redefine the GTC connector modifications will be overwritten.

  On the side of the support of support for changes to all of the artifacts created by GTC varied per person support and time. It is not officially supported (most of the time).

  Best regards
  / Martin

• Cannot launch ManagedServer by using the Console

  Hello
  
  I created an Admin Server (prot is 7001) and 1 managed server (name: MS1, port is 7003) and I try to run the managed server, it works fine once I removed all the domain and created the field, also created 1 Admin Server and 1 (MS1, 7003) server managed with the same server name and port numbers, then I try to start the server managed using the console using startManagedServer.cmd MS1 t3: / /. 127.0.0.1:7001 but I got error like # < 1294642894256 > < BEA-002606 > < cannot create a server socket to listen on the channel "Default". The 0.0.27.92 address may be incorrect, or another process is using port 7003: exception java.net.BindException: cannot assign requested address: JVM_Bind. >
  
  Note: Even I created the Manager server MS1 with another port number(ex: 7009) and also I got the same error
  
  Pls help any body about this?

  Hello

  Do not remove the domain without stopping the servers running in this area.
  Try to kill the instance that is already running on port 7003.

  As you said even on 7009, you are facing the same problem, try to modify the config.xml file and the address of the listening on 127.0.0.1.
  Make sure you take a backup of the config.xml file before editing it.

  Thank you
  Amandine
  http://middlewareforum.com

• Want to make a "new user" form in Acrobat using the Forms Designer, I'm going about this wrong?

  Hi all, I work in a small company and would like to have a generic template that back to new users when they start. He practices the company base on internet usage, storage of base directory, login, etc... I want that last page of a form that I fill to contain their user name, password, telephone etc... I've implemented the shape makes a .pdf file and used the form designer to implement the fields I want to have active. Now I don't know what to do. I deally, I want save a copy of the file for each user in a network folder, with their information on this subject, and the form fields locked after I'm done. I've been playing with the distribution of forms and appear not to do what I want, looks like it creates a single file with all the different updates. I want possible, or can I just keep the shape of the United Nations distributed and open / save for each user and hope that they erase their data?

  Any help would be appreciated to gratly! Thank you!

  Yes, for what you want to do create the form in Acrobat is the best way to go. Here are a few tips.

  1. to flatten the page that contains the form field, use the flattenPages method. It is documented here: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.466.html

  So to flatten the last page of a document, you should do something like:

  Convert fields on the last page to the other content

  flattenPages ({start: numPages - 1});

  For more information, see the tool flatten Page content that you can download here: http://www.pdfscripting.com/public/65.cfm

  2. to save the changes in a new document, you can do this:

  Trigger the menu item save as

  app.execMenuItem ("SaveAs");

  It will require a location and a name of daughter. More information: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.143.html

  These two lines of code provide the minimum stripped for what you want.

  For the backup operation, you probably want to eventually create your own routine to SaveAs in a JavaScript file to the folder level which also contains the code that implements a custom toolbar button that implements this.

  For example (method addToolButton): http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.134.html

  and (trustPropagator for example of method w/save as): http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.168.html

  and (method trustedFunction): http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.167.html

  Create your own routine to SaveAs to silently save the file to the desired location by using a file name based on the content of one or more form fields, for example.

• How to use Type Casting in the JSF Expression Language

  I have a CategoryId attribute in my original Version of type oracle.jbo.domain.Number. I am using the expression of the Boolean element in JSF as #{rank. CategoryId! = 4}
  Here the JSF code:

                        <af:column id="s141NewItem3Col" noWrap="true" width="100"
                                   rowHeader="false">
                          <f:facet name="header">
                            <af:outputLabel value="CAtIDDeq4" showRequired="false"
                                            id="ol18"/>
                          </f:facet>
                          <af:inputText id="s141NewItem3"
                                        value="#{row.CategoryId != 4}"
                                        label="CAtIDDeq4" required="false"
                                        readOnly="#{((pageFlowScope.ContractRightCategoriesTable.newRow) and (!(jhsUserRoles['RM, ADMIN, AllButTitl, AllButAdmn']))) or ((!pageFlowScope.ContractRightCategoriesTable.newRow) and (!(jhsUserRoles['RM, ADMIN, AllButTitl, AllButAdmn'])))}"></af:inputText>
                        </af:column>

  I get the run-time exception "Cannot convert type oracle.jbo.domain.Number class 4 to class java.lang.Long".
  
  I wonder how the line. CategoryId is considered to be Long? Please notify. Also, I'll be able to use type cast expressions in the JSF Expression Language?
  
  Thank you, Pradeep

  Use the attributeValue
  Try * #{row.bindings.CategoryId.attributeValue! = 4} *?

  Check this thread for more details dealing with roughly the same:
  El expression to enable or disable

  Thank you
  Nini

• I am unable to Type or use the keyboard in Firefox 18.0 anywhere, including the search bar and URL bar. How should I fix this?

  I am unable to type anything or use the keyboard to type in Firefox. I use Firefox 18.0 installed on Windows 7.
  I am able to paste in the URL bar and the search bar, but absolutely not able to type in it.
  I already tried the 'reset' option but are still unable to type.
  Also tried Firefox in safe mode with disabled addons but are still unable to type.
  Install a new copy of firefox after Firefox uninstall and delete the old "Mozilla Firefox" in windows folder. but always impossible to type.
  Please tell me a solution to this.

  Have you tried restarting the computer?

  It is possible that you have activated the keyboard by chance to one who does not work in Firefox.

  • http://support.microsoft.com/kb/258824 - how to change your keyboard type

  Windows remembers the setting by application keyboard layout and you have probably changed the keyboard by accident via a keyboard shortcut.

  • http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview The language bar (overview)
  • Make sure you have the language bar visible on the Windows taskbar
  • You can do this via the context menu of the taskbar: toolbars > language bar
  • Check the language setting (keyboard) keyboard for the application that has focus via the icon in the language bar
  • You need to do that while Firefox has focus because Windows remember the keyboard by application setting

  Control Panel > regional and Language Options > keyboards and languages > change keyboards > advanced key settings > change key sequence