CONSTRUCTION CFML INVALID ERROR

Similar Questions

• How to solve the "HKEY_LOCAL_MACHINE Windows Search\Gather\Windows\System Index missing or invalid" error message

  'HKEY_LOCAL_MACHINE Windows Search\Gather\Windows\System Index missing or invalid' error message appears after each Norton Utilities scan.

  The problem is that IE frequently slows down or blocks, the Task Manager shows the CPU clocked at 100% the problem will clear for 5-10 minutes.

  I am running Windows XP Home Edition with Norton Utilities; Norton Antivirus; Advance system care and Super AntiSpyware as my software security.

  Anyone had any chance to solve this problem?

  Thank you

  Richard Boyer

  Hello

   

  ·         Is your update of the antivirus program?

  ·         Were there recent changes made on the computer before the show?

   

  Follow these steps and check if that helps.

   

  Step 1:

  As you receive the error message when you use Norton, I suggest you to contact Norton support:

  http://us.Norton.com/support/index.jsp

  Step 2:

  I suggest you run this Microsoft Fixit tool and check if it helps.

  Solve Internet Explorer add-on problems when IE hangs or freezes

  http://support.Microsoft.com/mats/ie_freezes_or_crashes/en-us

  You can also view this article to improve the performance of Internet Explorer and check if it helps.

  Internet Explorer is slow? 5 things to try

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and I was tol

  I have recently installed Windows 10 free update.  Now I am unable to delete .pdf files and get the invalid error message "Function MS-DOS."  It has never been a problem with the previous Windows 8.1.  I contacted Microsoft technical support and they told me there is a problem with the .pdf application and I need to contact Adobe Acrobat. This can be corrected?

  uninstall any version of acrobat is installed.

  clean by Download Adobe Reader and Acrobat tool - Adobe Labs

  Restart your computer.

  delete all to delete pdf files.

  If this fails, it is a problem of ms.  If this attempt is successful, then reinstall your acrobat.

• Frequent State existing has been invalidated error

  Hello
  
  I am confronted with ' ORA-04061: current status of has been invalidated "error frequently.
  
  Envelope to restart the workflow and bouncing Apache solved the problem. But this happens very frequently, every day, with the workflow I created.
  -----
  An error has occurred in the following workflow.
  
  Article Type = XXPRTPC
  The point key = 1179610
  The key user =
  
  Error name =-4061
  Error message = ORA-04061: current status of has been invalidated
  ORA-04061: existing State of the package body 'APPS '. TPC_PKG"has been invalidated
  ORA-04065: not executed, altered or abandoned the package body "APPS. TPC_PKG ".
  ORA-06508: PL/SQL: called program unit is not found: 'APPS. TPC_PKG ".
  Battery error =.
  Wf_Engine_Util.Function_Call (TPC_PKG. YES_ACTION, XXPRTPC, 1179610, 188747, RUN)
  
  The activity Id = 188747
  Activity label = XXTPCACTION:YES_ACTION
  Translate Code = #EXCEPTION
  Notification ID =
  Assigned to the user =

  Nadir says:
  I checked all objects that depend on the package, they are all valid.

  They may now be valid. But you must check out them when the Package has been invalidated.

  It could happen that some dependent object was changed/re-compiled, leading to the Invalidation of package. As far as I KNOW, oracle will try to recompile the objects when they are queried/used. Read management object dependencies for more details.

  I suggest you to create a job to check the invalid objects in the database and to save the necessary details: name of the object, Type, etc. Last_DDL_Time. You can then check the data recorded by the work.

• Why is my try/catch and onError() not to manage invalid CFML build errors?

  I played around with different ways to place cookies and in the process, I use the wrong cfcookie tag. He threw an error and the onError() has somehow made his work. Rather than giving a nice cleaning as usual error, the page completely stop treatment.

  So I played a little more and tried this with a onError() in the application.cfc.

  < cftry >

  < cfset asdf = / >

  < cfcatch type = "any" >

  < cfdump var = "#cfcatch #" >

  < / cfcatch >

  < / cftry >

  He threw the error, as if the try/catch wasn't there. Is this normal and it took me years to see?

  Phil

  The behavior you observe is expected and correct. Try/catch and onError is intended to catch any exceptions.

  ColdFusion compiles the executable code pages before their execution. Strictly speaking, the exceptions are errors that occur when ColdFusion runs already compiled CFML (CFM and CFC) pages.

  However, what happens when Coldfusion is errors, for example, emissions and syntax when compiling errors? These errors occur before that ColdFusion converts executable code. Therefore impossible to use try/catch or onError to handle them.

  ColdFusion will report errors that it finds during compilation and compiler errors.  This is what is happening in your example. The line

  contains a programming error and therefore won't even compile. That's why you get a compiler error.

  If replace you it with the line.

  you will get a code that compiles, but which generates an exception.

• Week old iPhone 7 displays "sim" invalid error

  Week old 7 128 GB iPhone displays "invalid sim" error intermittently. Nothing in particular seems to make. Just shows up randomly. If I turned off and restart it solves for a while. I'm getting a couple of times a day now. Anyone else having this problem? How should I do? I intend to go back to the Apple Store where I had tomorrow.

  This page can help you

  If you receive an alert on the SIM card in your iPhone - Apple Support

• «.. . handle is invalid': error only when closing the Application, the runtime, everything seems fine...

  Hello

  first of all: I am relatively new to LabWindows, working on it for some practical work as a student

  (Yes and sorry for the bad English, I'm from the Germany)

  The problem:

  The first important Information:

  After searching for a solution, I don't know, what to do,

  My project consists of a Main.uir file with a tab, a 'Main.c' which manages essentially the main .uir-stuff and some stuff-Initiating and in addition to that several Sub-Sourc-files, one for each tab panel of the Main.uir - tab.

  To use the user interface elements on the main tab with secondary Sources, I'm launching tab handles at startup, which can be used by SubSource files, such as:

  GetPanelHandleFromTabPage (PANEL, PANEL_TAB, 2, &BALU);)

  With this controller, I can identify each UI elements when working with secondary sources

  The second important information:

   

  In some of the TabPages in the .uir, there are several ControlArrays. To use them, I create a ControlArrayHandle, such as:

  MWSAverageHandle = GetCtrlArrayFromResourceID (BALU, MWSAverageArray);

  No, I'm able to identify specific paintings, as items:

  SetCtrlVal (BALU, GetCtrlArrayItem (MWSProgressHandle, ActiveBalun), ProgressString);

  Now there is a problem, I am not able to solve:

   

  During execution, everything works fine, I can use all the elements of a ControlArray with this ControlArrayHandle ("MWSProgressHandle"), everything works perfectly, no errors at all. BUT, when you close the program, I get the following error message:

  RUNTIME ERROR NO MORTAL: "Baluns.c", line 313, col 16, id 0x00000AB8 thread:

  Library function error (return value ==-4 [0xfffffffc]). Panel, menu bar or a control table handle is invalid

  But this seems somewhat ridiulous for me, because when executing that each line works perfectly, each element of Array can be used without problem...

  Is it something I'm not able to see?

  Thanks a lot for your help.

  Greeting from Lübeck, Germany!

  Mathias

  In the reminder of your timer, you check for (event == EVENT_TIMER_TICK)? Might get called for various events, not just the one you have in mind...

• Signature digital invalid error when refreshing a sensor

  Hello. One of our six sensors IDS recently stopped accepting updates the signature. The error I get after attempting an update is:

  "Sensor : Signature Update process.

  An error has occurred during execution of the script of update on the sensor that is named .

  "Retail = an error occurred the sensor during the update sensor message = idsPackageMgr: digital signing of the updated file was invalid, the CEC to replace the corrupted file.

  I tried to replace the damaged file, no luck. I also tried to update the sensor by any means (IDSMC, CLI), update automatic and manually via the web gui, using several versions of different signature.

  Finally, I shot the S190 S189 sensor. Now, I can not yet re - apply the S190 same day I orriginally did, I get the same error.

  Is there a way to reset the mechanisim that verifies the digital signature on the sensor? Is there anything else I can do?

  Any input would be appreciated!

  I am assuming that you are using a 4.x

  Try this:

  1. download http://www.cisco.com/cgi-bin/tablebuild.pl/ids4-sigup S192

  2. install the CLI sigupdate

  3 re - import the sensor IPS MC

  Or you can try to remove the MC sensor, re-importing then apply the S192 sigupdate.

• ORA-01722 invalid error number

  Hi all

  I am trying to execute the query, we give the below error: ORA-01722 invalid number

  Create Table

  CREATE TABLE test_table

  (NUMBER (12.0) ID,)

  STORE_ID NUMBER (10.0).

  SUPPLIER_ID VARCHAR2 (128 BYTE),

  STATUS NUMBER (4,0).

  VARCHAR2 (2000 BYTE) COMMENTS

  )

  Insert into values table_test (81,1111, '10021', 2, null);

  Insert into values table_test (82,2222, '10021', 2, null);

  Insert into values table_test (83,1444, '10021', 2, null);

  Insert into values table_test (84,1211, '10021', 2, null);

  Insert into values table_test (85,1311, '61321', 2, null);

  commit;

  Run the query

  Select * from test_table where store_id in (: store);

  Variable binding give: store values such as 1111, 2222, 2233

  If: store variable binding is given a unique value such as 1111, it works very well.

  With multiple values his throw error ORA-01722 number not valid

  Thanks in advance

  When you assign

  : store: = '1111, 2222, 2233';

  You assingn it a SINGLE string. And store_id in ('1111, 2222, 2233') is not the same as store_id in (1111, 2222, 2233). The latter seeks store_id = 1111 or store_id = 2222 or store_id = 3333 while the former only looks store_id = '1111, 2222, 2233'. NUMBER of being store_id, Oracle tries to convert '1111, 2222, 2233' string and raises obviously ORA-01722 invalid number. Use the collection or:

  Select * from test_table where «,» | : store | ',' like '%', | store_id | ',%';

  However, keep in mind the foregoing will not use index if value is indexed.

  SY.

• Entry digital invalid error

  Every day I get errors like this when removing layers in Photoshop CC2014.2.2

  "Invalid digital input. Must be an integer between 0 and 239. Previous inserted value.

  Super boring. It is a new thing. Didn't happen for a long time. Is this a bug in update?

  It's weird. Have you tried to reset your preferences. This blue box developed should disappear as soon as you use the tool.

• Construction GetVMFiles.CS errors

  I am trying to build one of the examples of project in the Web development kit. In this case GetVMFiles.CS.  I use Visual Studio 2008 Professional. I tried the two GetVMFiles2008.csproj and the GetVMFiles.csproj with the same mistakes:

  C:\WINDOWS\Microsoft.NET\Framework\v3.5\Microsoft.common.targets: warning MSB3245: cannot resolve this reference. Unable to locate the assembly "AppUtil. C:\WINDOWS\Microsoft.NET\Framework\v3.5\Microsoft.common.targets: warning MSB3245: cannot resolve this reference. Unable to locate the assembly 'VimService2008.XmlSerializers '. C:\WINDOWS\Microsoft.NET\Framework\v3.5\Microsoft.common.targets: warning MSB3245: cannot resolve this reference. Unable to locate the assembly 'VimService2008 '. GetVMFiles.cs (8.7): error CS0246: "AppUtil" type or namespace name could not be found GetVMFiles.cs (9.7): error CS0246: the name of namespace or type 'VimApi' could not be found GetVMFiles.cs (15.24): error CS0246: "AppUtil" type or namespace name could not be found GetVMFiles.cs (16,16): error CS0246: the name of the namespace or type 'VimService' could not be found GetVMFiles.cs (17,16) : error CS0246: "ServiceContent" type or namespace name could not be found GetVMFiles.cs (143,42): error CS0246: the name of the namespace or type 'ManagedObjectReference' could not be found GetVMFiles.cs (159,38): error CS0246: the name of namespace or type 'ManagedObjectReference' could not be found GetVMFiles.cs (258,45): error CS0246: the name of namespace or type 'ManagedObjectReference' could not be found GetVMFiles.cs (290,23) : error CS0246: the name of the namespace or type 'OptionSpec' is not found

  I tried the target of creating project construction in the .NET Framework 2.0, 3.0, and 3.5, once again, all with the same results.

  Any suggestions as to what to try?  Thank you

  In order to build the project, you will need to generate stubs. You will be required to run the available in < SDK > Build2005.cmd \samples\DotNet, which will generate stubs to build the samples. You can also refer to the configuration guide of the developer for further details.

  http://www.VMware.com/support/developer/VC-SDK/visdk41pubs/vsp41_developerssetupguide.PDF

  I hope this helps.

• CS6 chronology 'invalid' error

  Win7 Home. All updates CS6.

  Have four maturities. No error on draft check. Generation Blu - ray fails after a certain time in the build. Get a 'windows of Adobe still' with: purpose of Blu - ray: ' < timeline > best scrap ", error:"Invalid time", Code: '24', note:"composition of presentation times cannot overlap. After clicking 'OK' get the message "Build program Failed. I can't find anything wrong with the content of the timeline. No idea what means this error?

  The top row is the Encore CS4 timeline that results, showing individual images and chapter markers.

  Yet CS6 presentation of the sequence of the CS6 BODY. Note that it is as long as the "merged" video and there is no chapter marker.

  I don't think that the videos are different. CS4 is a video, no images. It seems divided because the markers are there, and the poster frame is the default position. CS6 introduced markers, if evenly distributed.

  A different thing is the pictures of marker are above the rule of the chronology and seem to have entry/exit points.

  Yes, added CS6 duration of the clips. FYI, my default adding a marker still is a zero and the marker is not divided. Your have a duration of 1 image. My markers are still with 0 or more than 0.

  If you have added the markers after you first brought in, you must select the timeline from the region of the timeline at the bottom and then edit-> update markers from Source.

• Object format invalid error Code 14 of the Blu - ray 0 x 00010402 not valid resolution

  Hey guys,.

  really need help here burn my blu - ray

  There is an error msg saying

  Purpose of Blu - ray: ' < Button > error: 'Invalid Format', Code: "14" Note: 0 x 00010402 no valid, graphic resolution must be at least 8 pixels, but no more than 4096 pixels in height and width Spec 9.14.4.2.2.2.1.1.1.

  He finished transcoding all until right when it will burn this error msg appears.

  Any help would be great.

  Thanks in advance!

  The solution: If you use a model of the internet or the library, when you edit in photoshop, you must let the background checked and it just put the new image. The problem is not with the buttons. The problem is in the background. In order to not turn off the bottom of the models, just put a new on it.

• The construction of exe error

  Good afternoon

  I have a project that you can see on the image named 'Project' and while I'm trying to create a stand-alone for 28_4_2009_PC_vi application I'm reveiving a mistake you can find on the picture called "error". Could you please tell about the correct procedure to a stand-alone application in the shared variable vi are included?

  Thanks in advance

  Hello

  Take a look at this link. Following this procedure usually solves the probem

• construction of DLL error with vc ++ 6.0:error LNK2001: symbol __imp__MessageBoxA@16 unresolved external

  Hello world.

  I just follow the example below

  http://zone.NI.com/reference/en-XX/help/371361F-01/lvhowto/concatenating_two_strings/

  but allways vc gives me an error like this:

  -Configuration: MyDLLTest - Win32 Debug-
  The compilation...
  MyDLLTest.cpp
  Which connects...
  Creating object Debug/MyDLLTest.exp and library Debug/MyDLLTest.lib
  labviewv.lib (lvlvrt.obj): error LNK2001: symbol __imp__MessageBoxA@16 unresolved external
  Debug/MyDLLTest.dll: fatal error LNK1120: 1 external no
  Error running link.exe.
  Creating the search information file...

  MyDLLTest.dll - 2 error (s), 0 warning (s)

  I am sure that I have included the file labview.lib or labviewv.lib, because the manual says labview 8.0 or new version must include labviewv.lib rather than labview.lib.

  And I also tried to insert extern "c" before the declaration of the function. It does not work.

  What is the problem with that?

  Your labviewv.lib file seems more likely to be corrupt.

  When I take your project and remove the reference to labviewv.lib and instead to modify the project settings to use labviewv.lib in the link settings and by far my path to C:\Program NIUninstaller Instruments\LabVIEW 8.6\cintools as additional link directory everything works fine.

  Your labviewv.lib also, the LabVIEW 8.0 to 8.6 mine are all around 450 kB 1.7 MB.

  If it is a legitimate link to LabVIEW 2009 file it may have been created with a version of Visual C and/or options that make it incompatible with the VC 6. Consider that 6 VC is about 10 years old.