Construction of a VI on the given schema

Similar Questions

• changes to the sound scheme are not saved

  I can't change the sounds associated with events, via the control panel - sounds and audio devices - sounds. When I make changes that they do not stick. They change what they were before.  The only way to change the sounds associated with events is to edit the file regristry (HKEY_CURRENT_USER\AppEvents\Schemes\Apps\Explorer\EmptyRecycleBin or BlockedPopup).  Any ideas?

  Hello

  ·         Were you able to change the sound scheme on the system without any problems before?

  ·         You encounter an error message when you try to change the model of sounds on the system?

  ·         How long have you been faced with these questions to?

  ·         Remember to make changes to the system?

  I suggest to disable the antivirus software on the system and then checks to see if you are able to record the sound scheme.

  Note: Activate security software once you've done the test.

  Also, I suggest you follow the steps mentioned in the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-desktop/XP-Pro-SP3-sound-schemes-forget-saved-sounds/4f0f46ff-5372-4DB5-A265-b4acba2e4254

• Create the form on table in the different schema

  Hi all

  in APEX I am logged in as long as user APEX_USER and the table, I'm trying to access the site with the creation on Table Wizard form belongs to the user. I have granted all privileges on a given user APEX_USER table, the wizard allows me to choose this table in the list, but when I press the next button, I get the following error message:

  You do not have access to the schema that you import. Import failed.

  Contact your administrator for the application.

  Seems to me that something similar had been already discussed here, but still no response.

  V4.1 assistants when you use a different schema

  Please, what are the rights must have my APEX_USER to be able to create forms tables belonging to someone else?

  Thank you very much

  Pavel

  Edit: I did the same thing on my laptop (APEX 4.2.6.00.03) here and it works as expected. This error I get to work with APEX 4.2.3.00.08 (of course you should not necessarily be the cause, very likely, I don't have all of the necessary privileges) :-).

  Hi Mike,.

  Thanks again for your response. If the schema was not related to my workspace, I would yet be able to choose the other schema of the selection list.

  In fact, there seems to be a bug in the link in my message original (for example it is still not fixed in version 4.2.3), but fortunately I was able to find a workaround - I created a view with the same name and the same structure as the original table, and then I was able to generate the form with the wizard , finally I gave up the display and modification of processes page manually. So the solution is I have to force the DBA APEX upgraded to the current version :-).

  Best regards

  Pavel

• Select in the XML schema

  I hope this is the right forum to post. I was wondering if there is any good tutorials or books on SQL in XML format?
  Basically, I need to interrogate the accounts of North Carolina who received a document given in the past day. This is a very easy task to do, in SQL, however, the State of North Carolina wants us to share our findings in a specific XML schema using nodes.
  
  Fortunately, I have the pattern that was given by the State of NC but don't know how to get my application to fit in the XML schema. I was wondering in a beginners perspective.
  
  Sorry for the newbie questions.

  Don't know if you're aware of this, or if it does not meet your definition of "user friendly".
  http://www.Oracle.com/technology/documentation/index.html

  Also fly over the intro or first chapter for the DB XML (research in your appropriate version) can be a good thing to do.

  I'm not sure what your analyst is trying to say. In the example I've provided, root and the neck are nodes in the XML document. Most of the things in XML are nodes.

• I was good an iPhone 5, now glass is separates the case possibly by a swollen... battery will replace Apple on the given phone I do not buy it outright?

  I was good an iPhone 5, now glass is separates the case possibly by a swollen... battery will replace Apple on the given phone I do not buy it outright?

  N (not free). You can consider and ask for warranty replacement.

• the connection of the given session was lost

  I have connected to the power supply IDRC DSP - 300-2, 5 HR via ethernet by VISA. After the connection system is normal. I send commands and receive responses. But when I stop and start feeding it new VISA refreshes the information on this subject. Get a power supply IP by DHCP, same IP has not changed, but I get the message "VISA: (Hex 0xBFFF00A6) the connection of the given session was lost" when trying to write the function VISA Write command. Information about resources in the visa system I get VISA resource find vi. How to solve this problem?

  PS Power supply connected on the second Ethernet card in the system.

  Yes, what you describe is expected behavior. When you turn off the power, the connection is broken and must be restored. How many times do you need to.communicate with this device? It might be more efficient to open a connection, do what you must do and then close the connection.

  Mike...

• How can I change the oracle schema in SSMA?

  We tested migration in SSMA for Oracle to SQL Server, and we are now ready to migrate from the production data.  However, the SSMA tool doesn't let me change the Oracle schema.  I can change the data source, but it will never refresh show new patterns in Oracle.

  Hello

  Please go to the Microsoft Community Forums.
   
  This problem would be better suited to the TechNet community.
  Please visit the link below to find a community that will provide the support you want.
  http://social.msdn.Microsoft.com/forums/en-us/categories
   
  Thank you.

• Is it possible to buy additional licenses so that I can legally install XP for the given PC?

  Purchase additional licenses of XP to charitable purposes.

  G ' Day.

  Seems I entered company free charity PC by accident. I fix PC for needy people in my community and have been recently
  Gift of parts which I now build computers for those who cannot afford it. I have an authentic copy of the retail of Windows XP Professional
  but I don't want to break any laws by installing it on several PC. Is it possible to buy additional licenses so that I can legally
  install XP for the given PC?

  I'm in the Australian Navy and can not afford to buy XP for each PC, I'm donating. Shipping with Linux does not work too well for these people because they are for the most computer illiterate and only know windows.

  See you soon.
  Select this option.

  G ' Day.

  Seems I entered company free charity PC by accident. I fix PC for needy people in my community and have been recently
  Gift of parts which I now build computers for those who cannot afford it. I have an authentic copy of the retail of Windows XP Professional
  but I don't want to break any laws by installing it on several PC. Is it possible to buy additional licenses so that I can legally
  install XP for the given PC?

  I'm in the Australian Navy and can not afford to buy XP for each PC, I'm donating. Shipping with Linux does not work too well for these people because they are for the most computer illiterate and only know windows.

  See you soon.
  Select this option.

  Windows XP is no longer sold by Microsoft.  You will need to search the Internet and find a place you trust or inquire locally.  Unfortunately - this is where you are at.

• Extension of the AD schema for second installation of the unit

  A CCM 4.1.3 and a Unity 4.0.4 server will be installed in a forest AD already having a CCM (3.x) and the servers of the unit (3.x) maintenance of users on the side is. The new CCM servers and services unit to users on the West Coast, including the mailboxes resident also on Exchange 2003 servers on the West Coast.

  When you install the unity server, what will be the consequences of the extension of the AD schema again for the new version of the unit? The schema has been extended during the installation of the 3.x version of the unit. Extension of the additional schema for the installation of the imminent 4.x Unit will have no effect on the existing unit? Or should the schema even extend again at all?

  Thank you

  Michael.

  I see a problem that you may or may not have lived:

  "Cisco Unity 3.1 does not support Exchange 2003. This means that you cannot run the tool of Exchange 2003 Forestprep to begin an upgrade to Exchange 2003, you can not have an Exchange 2003 server in the same forest, Active Directory as the Cisco Unity server, and you can not host subscribers Cisco Unity in Exchange 2003. Before you run Exchange 2003 Forestprep, you must first spend Cisco Unity version 4.0 (3) or later. Otherwise, the changes that Forestprep makes to Active Directory will cause Cisco Unity stop working. »

  See http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_system_requirements_hardware09186a008010a339.html

  If you had an exchange environment 2000, he would have just run the adschema unit 4.x configuration and the extension of the schema is backward compatible for 3.x. You can run the extension of the scheme for unity 4.x anytime before installing unity 4.x

  If you want unity 4.x installed, you must extend the schema (even if the schema has been extended for unity 3.x).

• Unable to play Zoo Tycoon 2: "the color scheme for has been changed to basic windows.

  I know that this has been answered before, but the answers were not useful or difficult to follow. I have Windows 7 and that's all I know not on my laptop. I am the admin of it so I have access to administration options if I have to.

  OK, so this is the usual scenario you install - very well no problem - you click play and it comes up with this, black to hot flashes and then it does not load the game.

  Things I've tried:

  -Uninstalling and reinstalling

  -Restart the computer after installation

  -Make sure my computer is compatible with the game (typed in "system requirements lab and went to this website: http://www.systemrequirementslab.com/cyri/ ")

  -Clicking on it a lot of time by pure frustration

  -Try to follow the instructions. I did: start > personalization > display > change display settings > avancΘs > Troubleshoot > nothing. The button on that I'm supposed to click is gray.

  Can you help me? What should I do?

  Thank you

  You don't download a Compatibility Mode...

  Uninstall Zoo Tycoon 2...

  Then place the Zoo Tycoon DVD in the drive and if she tries to autorun, cancel it.

  Go to the icon of the DVD drive in 'Computer', do a right click and open/explore the DVD.

  Find the configuration file, right click and select Properties.

  Check the box "Run as Administrator" and then close the Properties window.

  Now, do a right click the installer again and select 'Troubleshoot compatibility.

  When the game is installed, you can locate the icon of the game, right click, go to properties and check the "run as Administrator box" as you did with the installation configuration file.

  XP mode would be worthless because the graphics driver in XP mode is not able to handle the load graphic

  The color scheme will change to BASIC when the game is executed because the game cannot handle Windows 7 Aero. It is normal for many old games...

• customize the color scheme

  Is it possible to customize the color scheme, so I can choose the color I want for each item, and not only the raw colors games pre-loaded? I want to be able to color the written component, toolbar tools-etc. Thank you

  Reach:

  Make a right click-> Customize-> color-> advanced appearance settings window
  In this dialog box, you can customize even more.

• How to reset the color scheme to the default level in Windows 7?

  I changed the default color of Windows 7 (32-bit version x) system palette, using the personalize > Windows color > link appearance and the dialog that results.   But she did background colors of controls like buttons, drop-down lists etc. in the dialogs implemented by applications, being identical to the forefront of the font of text on them.  This makes the information unreadable text.   I want to restore the default color palette, so that this information can be read.   I want to know how to reset the color scheme, since other changes in results window customization in unpredictable and unreadable color on other components of the application windows.
  As this resulted in almost total ease of use of my computer, I would be very grateful to anyone who can guide me to reset the color scheme for my computer to its normal state by default as soon as possible.   Thanks in advance.
  -arasan77

  Defects of appearance and personalization,

  http://www.SevenForums.com/tutorials/282-window-color-appearance-change.html

• Update the workspace schema and schema Post installation Analysis App

  Initially, I create the workspace schema and the schema analysis corresponding to an application in the diagram A title.  I am now interested to change the schema associated with the workspace and the application in the diagram B.  I can easily do that via the workspace management UI, but I need a way to this script, so I can deliver to customers.  Does anyone have a solution?

  Chris Kopacko says:

  Initially, I create the workspace schema and the schema analysis corresponding to an application in the diagram A title.  I am now interested to change the schema associated with the workspace and the application in the diagram B.  I can easily do that via the workspace management UI, but I need a way to this script, so I can deliver to customers.  Does anyone have a solution?

  Changes in the workspace can be performed using apex_instance_admin API methods ( add_workspace/add_schema/remove_schema etc.), even if this requires scripts must be run by a user with elevated privileges.

  Once the required schema is associated with the workspace, the analysis schema can be changed using the apex_application_install.set_schema method in a script to import.

• Can FND_USER_PKG be executed or used by the APPS Schema

  Hello

  I have a client who needs to use applications. FND_USER_PKG (to update password etc.) through the APPS Schema.

  Is it supported?

  Kind regards

  Hugues

  Hello Pravin,

  Thanks for the tips.

  It is not supported. It is considered as customization and Oracle will not be supported.

  How to: Run the application as a custom user [1483548.1] Packages

  Kind regards

  Hugues

• URG: How can I force APEX to use the specific schema: spaces of work APEX_040100 or entitled to another schema?

  Hi all

  Here's the scenario:

  1. My computer crashed. were to return to complete export (expdp 11.2.x to impdp 12 c). successfully done.
  2. Configured ADR blah blah... can access the admin of the apex.
  3. Problem is: administration interface does not SEE my workspaces apex Apex (only the workspace IN-HOUSE).
  4. After investigation it seems that APEX (after the upgrade) is somehow configured / run with: schema APEX_040200 and not

  APEX_040100 (as I have improved Apex in the old database versions).

  
  

  5. If I'm running the following:

  ALTER session set current_schema = APEX_040100;

  Select short_name, display_name

  of wwv_flow_companies

  where source_identifier is not null;

  
  

  I SEE all my beloved workspaces.

  6 my questions:

  a. How can I force APEX to use the specific schema: APEX_040100 instead of APEX_040200?

  b. or are there other alternatives to assign these workspaces in the current environment?

  
  

  Concerning

  Etay G
  

  Hello Brad,

  Thank you for your response. Appreciated.

  • You are right. Indeed, this should be the correct answer:
    • I forgot to mentioned I tried this (before the procedure below):
    • (https://docs.oracle.com/cd/E59726_01/install.50/e39144/trouble.htm#BABCBEAD)
  • Yet, as I had a little corrupted environment Apex after import (impdp), COMPREHENSIVE database this method of revocation (above) has failed several times to me.
  • What solved my problem was is mentioned here: https://community.oracle.com/thread/2565074?start=0&tstart=0
  • Here's what I have (solves the problem):
  • Deleted APEX_040200 Apex 4.2 installation().
  • Text left in DB is the only APEX_040100
  • Then, the version 5.0.3 and it worked!
  
  More importantly, after the installation of APEX, all workspaces, users, etc. are automatically correctly resided in APEX.
  • I think that if you have only 1 version of apex corrupted in DB. It should work as well. Remove again, schema using the above script (check version) with caution (after backup, etc.).

  Kind regards

  Etay G