Could not overcome NB100 recovery cd or recovery boot option.

Similar Questions

• The system could not find the environment that has been entered - option Windows 7

  I don't know what I was doing at the computer before this problem started. However, I first noticed that something was wrong when I tried to open the photo viewer and was faced with the problem of the impossibility to find the module specified for this program. In an attempt to solve this problem, I tried to download and install the Photo Gallery in Windows Live and this is when I first discovered that my system has this problem.

  
  

  I went online to search for solutions to these problems, but none of the solutions worked. Here are the steps that I tried in vain that the system could not find the environment option that was entered.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  I tried open CMD with administrator privileges but am unable to do so. Once more, the next step on the start-up of the Installation DVD of Win 7 to use the Startup Repair tool doesn't have that the system was unable to find the environment option that was entered. I proceeded to try to use the system restore, but is facing the same problem too.

  
  

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/E272E37C-3C80-409F-8CDF-F3F2242B97D4

  This is the report on my existing variables according to the steps there. But unfortunately, this thread has shown no solution, that I could undertake, given that I can't open Regedit too.

  
  

  
  

  %ALLUSERSPROFILE%

  APPDATA

  ASL.log

  CLASSPATH

  COMPUTERNAME

  ComSpec

  FP_NO_HOST_CHECK

  HOMEDRIVE

  HOMEPATH

  LOCALAPPDATA

  LOGONSERVER

  NUMBER_OF_PROCESSORS

  OPERATING SYSTEM

  Path

  PATHEXT

  PROCESSOR_ARCHITECTURE

  PROCESSOR_IDENTIFIER

  PROCESSOR_LEVEL

  PROCESSOR_REVISION

  ProgramData

  GUEST

  PSModulePath

  PUBLIC

  QTJAVA

  NOMSESSION

  SystemDrive

  SystemRoot

  TEMP

  TMP

  USERDOMAIN

  USERNAME

  USERPROFILE

  WINDIR

  
  
  Can someone help me please? I think to reformat my computer if this continues (think of how to do it now I can't run the Windows 7 Installation disc either).
  
  
  Thank you very much.
  
  
  Nicholas C

  You can probably fix your problem by using the system restore. Here's how it works:
  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Enter the administrator password when you are prompted. It is often empty.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• Could not start the recovery CD

  Hello

  Can someone help me?
  I am recovering my Satellite A100 using the recovery media of the product supplied with the laptop again. I place the disc in the dvd/cd drive, turn on the machine and using F12 select boot from CD/DVD drive. After that, the cd player tries to start but nothing sound as if the drive cannot start.

  The recovery disk works fine in other machines and other cd is starting ok in my machine that should be retrieved.

  Anyone have any ideas what I can do or get the product to start recovery cd?
  I also changed the boot order in the bios to CD/DVD and tried hold 'C' on start up.

  See you soon

  It's very strange. Try simply several times. If the recovery media is not damaged it should work somehow.

• Could not complete the recovery of the disk system

  Restore progessed through the installation of windows

  pre-pinnist they arrested

  original title: 3 tent perform the recovery system with windows vista sp1 recovery dics. last error message installation incomplete .__can I buy and install Windows 7 without doing a system recovery

  If you have problems with your Vista recovery media, it can point to a hardware problem, which would not solve an installation of Windows 7.

  Contact the manufacturer of your computer for problems with the recovery media.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Could not find the recovery disc for my laptop

  I'm buying for my Presario CQ50-209WM laptop recovery disks.  When I go to the software/driver download page and click on the Vista recovery disc, it is not available.  How to get the recovery disc for this laptop.

  Thanks for any help.

  Peg

  These links are dead to 99% of the numerous times, reported, several times.

  Contact HP you Chat, email and phone options here. Personally I had good results with the cat.

• Could not start the recovery mode

  Have a 10 years, MacBook Pro under Snow Leopard. I want to erase the hard drive, so I can pass the computer. Tried to go to the mode of recovery many times, but I get to my office. Have you tried pressing the button command + R with no luck. Then I tried just by pressing the option key. Same thing.

  Someone has an idea?

  Thank you

  Rivervu

  You need to start on the DVD included with the computer. There is no recovery mode in Snow Leopard, and your computer is too old to use Internet recovery.

• HP Envy 17-2110en: could not find a recovery media? No Solution don't Please HELP!

  Hi guys,.

  I have HP Envy 17 - 2110en LS594EA

  I lost my dvd recovery and accidentally deleted the recovery partition. Now, I find anywhere the recovery media. Hp support on the drivers section page there is no recovery media. How can I manage this problem? Thank you

  Concerning

  Hello:

  You can probably find the recovery disks from HP e-partner on the link below.

  Select the country where you live (I did defect to the United Kingdom).

  http://www.best2serve.com/

  In the search of recovery kit window, enter the product number (LS594EA).

  When I entered the site of the United Kingdom part number, it shows that there is a recovery kit.

• Could not complete the recovery of the system

  original title: Please HELP! I just started to run a system on my HP PC recovery, but if it is stopped at halfway.  I erase all my personal & data files from my computer to run a system restore?

  Help, please! I just started to run a system on my HP PC recovery (have Windows XP) because nothing has been pretending to work.  I tried the system restore and it did nothing, there was no answer.  Now I'm scared, I just deleted most of my files, photos, etc. of my com [uter.  I stopped at halfway through the recovery my computer because I read somewhere that it will save all of that sort of thing.  I had read somwhere else before it would be safe.  Did I just completely erase all my personal files & data from my computer to run a system restore?

  Hi JulieSchmidt,

  1. are you referring to the HP system recovery?

  2. what disc you used for the recovery of the system?

  3. what happens when, restart the computer?

  I suggest that you contact HP support if you use the system recovery HP for more information on the issue.

  HP support

  http://WWW8.HP.com/us/en/support-drivers.html

• Windows could not start. Status: 0xc000225. File: \Boot\BCD

  Pavilion dv7 - 6187cl Entertainment PC

  Hello

  The following assumes that you are using Windows 7

  If you do not, use another PC to create a Windows 7 recovery CD.  Download the ISO relevant among the links below.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.  One time created, or if you already have this, insert the CD into the laptop and restart at the start of it.  Select repair your computer and choose the command prompt.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• Using every night (64). Could not find a way to 'save' the cookies options settings in the Web GUI. Something I'm missing?

  I want to use the option "use the custom settings for history" with cookies turned on in the view of privacy in 35.0a1 every night (2014-09-07). But there is no way that I can save the changes, nightly switch to normative action "remember history" automatically.

  Anyone?

  Maybe you should install the current version of Firefox or switch on the beta update channel instead.

  If you have installed at night because it's the only version that has a 64-bit version, so keep in mind that 64-bit Nightly builds for Windows are generated only for test compilation errors and are not all tests that get any other builds, so the risk that something is wrong can be very high.

  32-bit versions of Firefox should work without problems on 64 bit versions of Windows.

  You can find the full version of the current Firefox 33.0.1 version in all languages and for all systems operating here:

  • https://www.Mozilla.org/en-us/Firefox/all/

  The latest beta version can be found here:

  • https://www.Mozilla.org/en-us/Firefox/beta/all/

• My FF image search returns error "your - Jr b Lacrosse ontario - search could not be carried out with the requested search options. Reset search tools search results»

  Before moving to the new 4 FF, if I did an image search, I had all sorts of images on the screen. Now when I do an image search, I get an error about the reset code of my research tools. I googled this and can't find that one another that there must be a JavaScript error that I disabled it in accordance with the instructions - (I think).
  I really need my image search tool.

  Clear the cache and cookies from sites that cause problems.

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' sites causing problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Can not access the recovery on M30 partition

  Hi all

  I use a Toshiba M30. Last week, I uninstalled the old version of Norton Antivus to install the new version of Norton Internet Security. After you have uninstalled the NA, I found that my phone does not work normally. I, therefore, formated C pilot. Then, I could not access the recovery partition to reinstall the OS.

  How can I solve this problem?

  Thank you very much.

  CUONG

  Could you please be a little more clear on the problem.

  You try to use the recovery CD? Why did you format drive C? When you say that you can not access the recovery partition, how are you trying to access? through BACK.

  Sorry, but your question isn't very clear and a bit confusing. Thank you very much

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• "boot configuration data store could not be opened" when starting bcdedit.

  "boot configuration data store could not be opened" when starting bcdedit. Boot config-dual PREV XP Pro x 64 1st disk; XP Pro 32 on the 2nd disk.  Nuked 1st disk and installed Win 7.  It seems that Windows 7 has not identified the 2nd OS because it wasn't on a partition on the same drive?  All I can find is info on editing an existing data store. I don't see any information on how to create one from scratch, except there is a Create option and the different option, but not how to decide what the values should be. Any help is greatly appreciated.

  Boot from the installation DVD and run Recovery menu. Command prompt.

  bcdedit/export C:\BCD_Backup
  c:
  Boot CD
  BCD attrib s h - r
  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Clone of SSD could not start

  I have an Acer Aspire 5742-6638 running on Core i5 - 480 M under Windows 7 64-bit.  I'm trying to clone my hard drive for an SSD.  Tried with the help of Paragon Drive Copy and EaseUS Todo Backup.  Both said cloned successfully, but the two could not be started.  I inserted the boot disk but still does not start.  I have no problems cloning a hard drive classic on the same computer laptop.  I also used the same software to clone a laptop Lenovo to an SSD.  He managed.  I don't know why this notebook allows you to clone a regular HD but not SSD.  Need help please.

  It was a super fast response.  I confirm that the SSD is the first boot device, but I can't answer the first question.  How can I see "system partition is marked as active and updated updated?  And how can I change active and implemented to date?  Thanks in advance.