Contact field to concatenate when loading? Solutions?

Similar Questions

• It is possible to compare the contact fields based on the value of data updated?

  Hi all -

  I would like to run a filter and compare my contact fields if the value in a field has been updated or changed.

  for example if the data in the "first name" value changes to be empty to have a value, which would respect the requirement.  Also if "phone number" 123-456-7890 to 999-000-0000 that would also meet the requirement.

  Did anyone done this before?  Any ideas of how to implement?

  Any contribution is appreciated.  Thank you!

  If that's what you're talking about, there is no trace of audit in Eloqua.

  It will be great if Oracle can verify the critical fields.

  The solution is to create to the top of the field in another area, so when it changes, you can compare the values.

  Good luck

• Have a program in which a sub front vi appears when loading the vi main

  I have a strange problem.

  • This problem takes place only after construction of an application using LV 8.6 Application Builder Professional version, and I installed it on the target computer. It occurs when you run the development system.
  • When I load the program on the target computer, one of the panels before Subvi used in the application appears at the top of the façade of the vi main.
  • The Subvi should never appear on the front panel at any time during the exicution program.
  • It happens to be Spreadsheet.vi writing that belongs to the standard library of vi.
    • I checked all calls to this sub - VI to check that there not be changed to make it load or appear when loading of the vi main.
    • It is called 4 different times during the exicution program but in no case is it set to display the front panel.

  Someone has seen this and if so what was the solution?

  Problem solved.  I copied the writing to Spreadsheet.vi from another computer.  Then, I went into the program and replaced vi in each place they called him.  The program now works as expected.

• C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How can I hide the addresses in my list of contacts in specific group when I send an e-mail to this group?

  How can I hide the addresses in my list of contacts in specific group when I send an e-mail to this group?  I don't want to have all email addresses

  made available to everyone in the group.

  Thank you!

  You use Windows Mail? The bold at the bottom is the party concerned.
   
  You can also create groups if you send e-mail to the same people often.
   
  You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.
   
  1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
  2. the Properties dialog box opens. In the group name box, type the name of the group.
  3. There are several ways to add people to the Group:
  a. to add a person from your address book list, click Select members, and then click a name in the address book list.
  (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
  to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
  (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
  4. Repeat for each addition until your group is defined.
   
  Note
   
  a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
   
  b. you can create multiple groups, and contacts can belong to several groups.
   
  If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).
   
  Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.
  

• Canvas campaign: filters common vs compare the Contact fields

  HI -.

  Is there a difference between using one or several Contact fields compare elements vs using a shared filter?

  In my campaign, I need to check if one of the three fields is equal to something specific (and therefore remove them from the campaign).  I couldn't achieve exactly the same results if I used a shared filter that sought the same criteria?

  Thank you

  Abe

  1. the shared filter evaluates when someone passes through this point of decision.  It is different from that of a Segment in which a Segment is your first point of qualification for a campaign (so why someone "stays in the segment").  They actually stay in the segment so that they did not leave the campaign yet.  If the segment is more permissive, your filter shared between them, so that hardly leave the campaign according to your rule.

  2. I saw your other post on the date field.  You're right... when I try in the Web I get an error as well.  Definitely a bug in the interface user, as you can do in a segment.  I would say for now you use the shared empty contact filter and log a ticket with Support for the bug in the user interface.

• How to rid a message that appears when loading a project?

  (PrProCS5.5.2. ch CS5Extended.) Master Collection S & T - Ed.   Win7pro.

  Hello

  When loading a project, PremierePro requests in the Explorer window where is the file 'PAL_canvas_lwr3d.psd'?

  Am totally familiar with this psd file name, but assume that this has something to do with a file of title I am or used in the project.

  The options are Skip/All, Offline/All, select and cancel.

  When I click on the folder of the project in the Solution Explorer, I was informed that no items match your search.

  Don't know what caused this window, but it go in here.

  What can I do to avoid this kind of thing from recurring?

  Thank you!

  Delete this "file" in your project Panel. When you open the first then you shouldn't get the error.

• 4.2.3/.4 data support assistant - slow when loading large files

  Hello

  I use the load data wizard to load csv files into an existing table. It works very well with small files up to a few thousand rows. When loading 20 k lines or more loading process becomes very slow. The table has a unique numeric column to the primary key.

  The primary key is declared to the "shared components"-> logic-> "data loading tables" and is recognized as 'pk (number)' with 'case sensitve' set to 'No '.

  When loading the data, these Setup executes the following query for each line:

  Select 1 "Klaus". "' PD_IF_CSV_ROW ' where upper ("PK") = upper(:uk_1)

  which can be found in v$ sql view during loading.

  It makes the process of slow loading because of the superior function, no index can be used.

  It seems that the setting of "case sensitive" is not rated.

  Removing the numeric index for the key primary and with the help of a function based index do not help.

  Explain plan shows an implicit conversion "to_char":

  UPPER (TO_CHAR (PK) = UPPER(:UK_1)

  It is missing in the request, but perhaps that it is necessary for the function based index to work.

  Please provide a solution or workaround to load data Wizard work with large files in a reasonable time.

  Best regards

  Klaus

  You must have the correspondence of PK to be "exactly - case-sensitive" (or something like that)

  In addition, I was already on the slowness with Oracle Support when dealing with important content.

  They are aware of the problem.  Only around is known to break up the data into smaller segments.

  (I'll have to track down the correct ID for reference...)

  My observation:

  APEX data loader makes a slow-by-slow transformation of the data instead of treatment in bulk.

  You will need to break up the data, or to build your own data loader.

  Thank you

  MK

• "Scratch disk" was almost full attention. I deleted the files opened to create space. However, photoshop CC, crashed before that I was able to free up space. I tried several times to re - open Photoshop CC but within 2 seconds it crashes when loading. I t

  "Disk zero" was almost full warning. I deleted the files opened to create space. However, photoshop CC, crashed before that I was able to free up space. I tried several times to re - open Photoshop CC but within 2 seconds it crashes when loading. I then decided to upgrade to the 2014 version, update. He worked twice and now repeat the same problem, I have lived before update. This only happens when I'am connected under "other user account" as I had been when the accident happened first and not as an administrator. I purged the cache, more space for performance, etc. in Admin mode, I ran permission repair in public services, but when I change the user account, photoshop crashes with seconds loading. Please notify 2.8 GHz Intel Core i7, 8 GB 1600 MHz DDR3

  As you can already read in your crash report - the crash has little to do with Photoshop and everything to do with your Nik/Google SelectiveTool plugin.

  Disable this plugin and contact Nik/Google for an update that fixes bugs in this plugin.

• Run the code once when loading the form

  Hi guys,.

  I have a text field (TextField1), which fills with a value (1-100)

  During the initial loading of the form, this value will be the highest.

  When the user navigates around the shape, this number will change (lower than initial load)

  I have another text field (TextField2) on the form I want to keep the original value to the loading of the form.

  something like: TextField2.rawValue = TextField1.rawValue

  But any event that I put in it always updates TextField2 with TextField1 value (not does not run the code once when loading the form)

  Can someone tell how can I do this?

  If the form is loaded with the number 70 as a value in TextField1 - TextField2 has 70 as a value and maintains this value regardless of what TextField1 goes to...

  Thanks a lot for any help

  try putting in the TextField2 docReady event:

  $ = TextField1.rawValue

• Unwanted characters when loading files at ODI table

  Hi all
  
  I get some unwanted characters when loading data from a file .txt or .csv using ODI.
  The presence of it's random, i.e. it varies from a field in each race.
  
  The data appear correct directly in the output of the query, but if you copy paste data into the window of developer or on Notepad etc it appears as:
  *"*
  *"*
  
  for example. If the result of the query is AMIT, if I have the same copy into Notepad, it appears as:
  * "AMIT *"
  *"*
  
  Can we make a few adjustments in ODI to overcome this problem?
  
  Thanks in advance.
  
  Concerning
  Amit
  
  Published by: user12195264 on March 21, 2011 23:46
  
  Published by: user12195264 on March 21, 2011 23:46

  See if the unwanted tank occurs in various field then you can not do something in odi. You should change the data file or if you know the right column you can you can update with the following query:

  Update table_name set col = substring (col, 1, length (col)-1);

• How to complete the list of values when loading screen

  Hi all
  
  I have a list of values based on another field (ANOTHER_FIELD).
  
  for example
  Select the value d, r
  from table_name
  where id =: ANOTHER_FIELD;
  
  ANOTHER_FIELD has a default value.
  
  But when the screen is opened to the list of values does not have the default value and the values list is empty.
  Just when it is filled with submission of the form, the list of values.
  
  Please tell me how can I complete the list of values when loading screen.
  
  Thank you!

  Hello

  It depends on how you have defined the default value for ANOTHER_FIELD.

  I always set my default settings using a calculation, that runs before header, on the element that defines the value using a static assignment, but to ensure that the calculation is dependent on the order of the day being NULL - try this

  Andy

• ("Not Responding") freezing when loading some Web pages

  When loading certain pages Web firefox crashes for a while with "(ne répond pas) ' at the top next to the page, also bringing Windows 7 Aero affect the top of the window instead of being hidden." Perhaps this lasts ten seconds give or take most of the time. Currently, the only websites I can remember this are newegg.comand youtube.com. I tried to disable hardware acceleration, this does not solve the problem. A similar problem if I recall still exists for drivers of some(not me) listed as a possible problem, so I'm running drivers Nvidia 344,48 WHQL, updates only after having this problem, and my GPU is a Nvidia GTX 770.

  Figured out, it seems to be caused by the add-on greenhouse. Disabled and have no problem.

• two other programs to lose control of cursor when loading firefox. Nitro pdf & on display at take-off from the software Center. Help, please

  two other programs to lose control of cursor when loading firefox. Nitro pdf & on screen takeoff on center software. Help, please.

  When I use the programs listed above and firefox is loaded, scrolling through these programs takes me at the edge of the window. I can't scroll 3 lines I can when FF is not loaded. I hate to say it, but FF is certainly the culprit.

  OK, if I may ask, what also happened when Firefox is in Mode safe? That will do this troubleshooting step, is whether this is caused by an add on that you have in your profile. Questions to troubleshoot Firefox in Safe Mode

  Moreover, the fact happen on the touchpad, as well as with an external mouse (if it's a laptop, if not, please ignore)Reset Firefox preferences to troubleshoot and solve problems

  Does this happen with accelerated scrolling on? This setting is in preferences/Options > Advanced Options > general

  Please post back with your results, thank you!

• When loading a new site using Firefox, why do I get a message telling me that "firefox prevented this page automatically lead to another page." Allow? »

  When loading a page using Firefox, at the top of the page, I get a message saying "Firefox prevented this page from automatically redirecting to another page - allow? This happens almost every time I start a new page, and Firefox will not allow to continue the download. I tell him to allow every time, even on the pages I have "authorized" by the past.

  Clear the Cache and Cookies

  • https://support.Mozilla.com/en-us/KB/template:clearCookiesCache

  Clear the Cache of the network

  • https://support.Mozilla.com/en-us/KB/how%20To%20clear%20The%20Cache#w_clear-the-cache

  -> click on the Firefox button, then click on Options -> advanced-> general-> remove the check mark from the warn me when Web sites try to redirect or reload the page

  -> Click OK-> restart Firefox Options window

  Check and tell if its working.