Contact requests from not not by

Similar Questions

• Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Thank you for contact I can not access my ipad air disable I try to reboot same issue pleas help me I have a lot of data in the air from my ipad

  Here you will find a way how to activate your iPad If you have forgotten the password for your iPhone, iPad, or iPod touch or your device is disabled - Apple supports

• Errors running SQLIOSim - Simulator/o SQL - error: 0x8007045D error text: the request could not be performed because of an i/o device error. Description: failed to get the info from cache drive to C:\

  When we execute SQLIOSim on a Server Windows 2003 VM hosted on an ESX 3.01 or 3.5 server, you get the following messages:

  Error: 0x8007045D

  Text of the error: the request could not be performed because of an i/o device error.

  Description: Failed to get the info from cache drive to C:\

  Anyone know what is the cause or how to solve the problem (if it is a question)?

  Thank you

  Had the same error and found this blog:

  http://blogs.msdn.com/psssql/archive/2008/01/14/SQLIOSim-error-request-could-not-be-performed-unable-to-get-disk-cache-info.aspx

  It will be useful.

• Windows ip configuration is an internal error: the request is not supported

  I cleaned up a few viruses out of a Windows XP Professional computer to a customer, and now he can't go on the internet.  When I check ipconfig, I get the following error.

  Windows IP configuration
  An internal error has occurred: the request is not supported.
  Contact Microsoft technical support for more help.
  additional information: host name of request impossible.
  So I googled some results. Have replaced the TCPIP.sys file with one from another computer, I still get the same message.  I don't have a windows XP original disk to put it into recovery mode.
  I also ran the command "netsh int ip resetlog.txt" but which did not help either.  I saw on another blog.
  The NIC is to see that there is a power cable plugged into it as well.  Help, please!
  Thank you
  Trever

  Hello Trever,

  Follow the methods and check:

  Method 1: You can refer the following Microsoft Knowledge Base article and check.

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Method 2: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Start and click run, then type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  For more information, see the article:

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Let us know if that helps.

• PHP contact form does not work

  I created my page using godaddy but my php contact form does not work. When sending a message, he won't have to the sent Message (su message to ha enviado) page, but it is not actually send any mails. The accounts are set up, but it does not work. The web page is cuysrus.com, the contact form is on the contact page.

  This is the code I used for the php class linked to the html file:

  <? PHP

  $to = " [email protected] "; "

  $subject = 'new message ';

  $nombre = $_POST ['number'];

  $apellido = $_POST ['apellido'];

  $message = $_POST ['message'];

  $headers = "from: ". " [email protected] \n";

  $headers. = "X-Mailer: PHP /'." phpversion();

  $headers. = "MIME-Version: 1.0\r\n";

  $headers. = "content-Type: text/html;" charset = iso-8859-1\n ";

  $retval = mail ($to $subject, $message, $headers);

  If ($retval == true) {}

  echo "message Su will ha enviado.

  } else {}

  echo "Vuelva a intentarlo.

  }

  ? >

  Well sorry that I forgot to ask about the action of form... you will need to rework this if you do not have to use the form of godaddy.

  a few things... first of all, you have the transformation code in the page, if you want that your action forms literally go anywhere.  ' change action = "? »

  Second, you'll need a 'trigger' in the form must be added a hidden as field

  Thirdly, finally, you have this block of code that I rewrote the process, if there is a request for 'process' then here is the code:

  <>

  form of process

  If (@$_REQUEST ['process']) {}

  $headers = "from: [email protected] \n";

  $to = "[email protected]";

  $subject = 'new message ';

  $body = "number:". "" $_REQUEST ['number']. »

  Apellido: ".." $_REQUEST ['apellido']. »

  Message: ".." $_REQUEST ['message']. »

  ";

  $retval = mail ($to $subject, $body, $headers);

  If ($retval == true) {}

  echo "message Su will ha enviado.

  } else {}

  echo "Vuelva a intentarlo.

  }

  }

  ?>

• Contact form will not send any e-mail.

  Hi all!

  My contact form will not send to my email. When I click the button submit it says message sent, but in reality it has not sent anything. Can someone please?

  My Html code:

  " < form method ="post"action =" MAILTO: [email protected] "enctype =" text/plain"> "
  

  < div align = "right" >
  

  < p > < span class = "message" > name: </span >
  

  < input type = "text" size = "50" name = "FirstName" padding = "5" placeholder = "or anonymous" > < br >
  

  < /p >
  

  < p > < span class = "message" > Email: </span >
  

  < input type = "text" size = "50" name = "email" placeholder = "Option if you want an answer back" > < br >
  

  < /p >
  

  < p > < span class = "message" > Message: </span >
  

  < textarea = 'message' id = cols 'message' name = "45" rows = placeholder "27" = a "request prayer for yourself" or someone else > < / textarea >
  

  < /p >
  

  < input name = "Submit2" type = 'submit' class = "submit" id = "Submit" value = "Submit" / >
  

  < / div >
  
  

  < / make >
  
  

  < / div >
  

  < do action = "sent_form.php" method = "post" enctype = "text/plain" name = "form2" id = "form2" > "
  

  < / make >
  

  < form id = "form1" name = "form1" method = "get" action = "mailto: " [email protected] ">
  

  < / make >

  
  

  
  

  
  

  Here is my PHP code:

  <? PHP
  
  

  $first_name = $_POST ["FirstName"];
  

  $email = $_POST ['email'];
  $message = $_POST ['message'];
  

  $to = " [email protected] ";

  $subject = 'new Message ';
  
  

  mail ($to, $subject, $message, ' from: '. $first_name. $email);
  

  echo "thank you."
  
  

  ? >

  Your PHP script is not enough.  It must contain your email address, disinfect & validate form input fields, etc...

  Your HTML form must never contain your email address.

  If your PHP script is in a separate file, you must reference it in the action attribute of the form as follows:

  action = "votre-forme-a-e-mail-script.php".

  
  

  PHP 5 forms validate email and URL

  
  

  Nancy O.

  
  

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Contacts app does not return to anchor

  Hi - I accidentally deleted the Contacts application from the dock icon on my MacBook Pro running the latest beta of Mac OS 10.12.1 (this problem existed also before this beta) - if I did drag the LaunchPad icon on the dock, the dock app icons enlarge but will not create a space to insert the Contacts book icon. Now, I have to open LaunchPad for my contacts. No idea how to solve this problem?

  Thank you!

  Open your Applications folder in the Finder. Drag the icon from there.

• "The object you requested is not currently available in the music of Apple to the Canada."

  I get this error "the object you requested is not currently available in the music of Apple in Canada." every time I try to open a shared playlist of music apple link.

  Help!

  Hello tommy.ly,

  Thank you for being part of the community of Apple!

  As I understand it, you can't play an Apple shared music playlist. Being able to listen to shared playlists is a great way to discover new music.

  When music is allowed for music from Apple, the license States that the countries that the song can be played in.  Most likely, some of the music on these playlists simply are not available through Apple music to the Canada.

  See you soon!

• Since the installation of 32.0, my contact list is not in alphabetical order. Seems to be dated, then alpha by name. Why?

  Running Version 32.0. As it has been installed, my Contact list is not displayed in alphabetical order. Instead the contact appear to be displayed in activity date and/or time, and then by order of name. Example, I got a list of contacts 25 in sequence pell-mell, when I changed a piece of dat and found that the contact has changed is now at the top of the list! I changed a contact who should appear above this on and also, he went to the top of the list. In this way, I got the entire list in order. I then saw a mistake on one and corrected these contact data. This time went to the top of the list!

  If I can provide any other information, please let me know.

  May I suggest to revert to a previous version and by adopting a more cautious approach to upgrades?

  In Thunderbird Windows updates are automatic by default. In order to avoid similar situations in the future, you could change that and decide to have a more cautious approach to updates.

  Before trying what anyone, make a backup of your Thunderbird profile.

  You can uninstall the current version of Thunderbird via Control Panel > programs and features and reinstall a previous version, download it from here:

  • Version 31.0
  • Version 24.8

  Click the type for your operating system. for example: If you use Windows select "win32", then select the language for example: en-GB British English = then download the .exe file

  You can customize the behavior of automatic updates, however, it is under Tools > Options > advanced > update.

  My suggestion would be to check the updates but let me choose whether to install them.especially if you depend on critical business e-mail / important or personal questions.

• Equium A60-191: 'request could not be performed because of an i/o device error. "

  I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
  It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

  I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

  I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

  1. click on start
  2. right click on my computer
  3. Select manage from the menu that appears
  4. in the computer management window, select Device Manager
  5. in the right pane, click to expand IDE ATA/ATAPI controllers
  6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
  7. Select Properties
  8. in the Properties window, click the Advanced Settings tab
  9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
  10. click OK and exit all windows.

  If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

  Device 0: Primary IDE Channel
  Unit 1: Secondary IDE Channel

  Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

• Contacts search does not display in the list of contacts after the future use

  Hello

  I have a small problem with the contacts app after updating to Android 5.0 lollipop on Xperia Z3 Compact. I have a database/list of contacts (local) big (about 800 entries). The problem list when I'm trying to find the contact using Research future - it shows me not all contacts who possesses the same attributes is entered in the search field. For excample: I have 13 inputs which family names starts by " ZA" sentence, but future research shows me only 8 entries from this sentence, but I don't know I have 13 entries with her. The funniest in this is that future research works ONLY WITH CONTACTS used from contacts contacts Unsused approx. will appear after research. I tried to erase the contacts app data parameters - is not worked.

  OK, I have a solution:

  First export all the contacts in a *.vcf file then delete all entries. Then import a backup *.vcf file and voila! Search future work:-)

  Thanks for your attention

• Windows Mail in Vista: I have e-mail contacts that do not appear in my contact list

  Vista on X 64 Windows laptop Mail - I have e-mail contacts that do not appear in my list of contacts - folder in which they are kept, so that I can remove the ones I don't want (IE I want to delete those not shown in my contact list)

  Ron was soon

  These addresses appear when you start typing an address?

  How to delete registration completion email in Windows Mail
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html

  How to remove an address from the list of AutoComplete in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm

• Drive HARD Ext cant allocated, it is said: the request could not be performed because of an i/o device error

  Hello world. IM new here.
  I would like to ask questions about the allocation of disk

  My drive HARD Ext (WD my passport) will not appear. so, I check in computer management, and my disk not allocated
  When I try to assigned by the following method
  It is said: the request could not be performed because of an i/o device error

  Please... is if everyone there a solution to this issue?

  I tried to update the firmware, WD Essential, WD utilities

  but this does not solve the problem...
  When I try to checkdisk in promptcomand but I don't know how to put it, because the drive isn't there...

  Please help me...

  Hello

  This error may be coming because of unavailable storage required for the motherboard drivers. You can follow the steps one by one, mentioned below and check if that helps.

  Method 1: Uninstall, and then reconnect the external hard drive. This method solves the problems where the currently loaded USB driver has become corrupt or unstable.

  1. Click Start, type Device Manager in the box Search
  2. Click Device Manager in the returned list.
  3. Click disk drives in the list of hardware
  4. Right click on the USB external hard drive with the question and click Uninstall.
  5. Once the hard drive is uninstalled, disconnect the USB cable.
  6. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  7. Look for the USB key in Windows Explorer

  Note: Connection of your USB external hard drive to a non powered USB hub can cause a lack of sufficient power to operate the external drive. Instead, plug it directly into your computer.

  Method 2: Install the latest Windows updates.

  This method will install the latest drivers for your external hard drive USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  If your problem still exists, go to method 3.

  Method 3: Reinstall the USB controllers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. Click Start, type device in the area Manager Search , and then click Device Manager.
  2. Expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  3. When finished, restart your computer. Your USB controllers will automatically install.

  If your problem persists, go to method 4.

  Method 4: Disable USB selective suspend framework. This method prevents your power off USB external drive.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  If this does not resolve your issue, go to method 5.

  Method 5: Install the latest drivers for your motherboard chipset. This method updates the chipset of your motherboard drivers, so that your computer will use your external USB hard drive.

  1. See the documentation for your computer that will contain the name of the manufacturer of the motherboard.
  2. Visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
     (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)
  3. Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

  Please post with the State of the question.

• Windows 7 rdp connection error "the request is not supported.

  I have a Windows 7 desktop computer that is set up to allow remote access to the desktop.  If nobody is logged on to the desktop computer, people can RDP in without problem.  If someone IS connected to the desktop computer, and then try to RDP from a different computer, he comes to the login prompt, but returns the error "the request is not supported" after entering the name and password.  Any ideas how to fix?

  Hello

  The question you posted would be better suited in the the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.