Similar Questions

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• Is it possible to get the name of the folder that contains the current document?

  Hi all!

  
  

  I know how to get the name of the active document

  
  

  app.activeDocument.name;

  
  

  but I was wondering if you could also get the name of the folder that contains the current document. Not sure if this is possible or not, so I thought I'd ask, if so it save me a lot of time.

  
  

  Thanks in advance!
  

  Hi djbgraphicdesign,

  does this work for you?

  if (app.activeDocument.saved){
  alert(app.activeDocument.path.name);
  }
  

  Have fun

• APP-COMPENSATION-07092: this action is not valid for the current record.

  Cannot access panel assignments used to updates within oracle HR receive this error message. How to solve this problem.

  Please see these documents.

  APP-COMPENSATION-07092 this action is not valid for the current record by trying to access assignment [813815.1 ID]
  PERWSHRG APP-COMPENSATION-07092 when you navigate to assignments [796523.1 ID] screen
  PERWSHRG APP-COMPENSATION-07092 trying to access assignment [ID 1434212.1]
  PERWSEAC cannot enter costs for the Contingent Workers APP-PAY-07092 [1458000.1 ID]
  App-pay - 07092:Action not valid for registration: current salary for the potential asset Asg [ID 360168.1]
  Method of payment when opening errors: APP-COMPENSATION-07092: this process is not valid for the current record. [ID 289691.1

  Thank you
  Hussein

• How to get the current selected action.

  Hello

  I would get the currently selected action.

  Please refer to the image below. Vignette (selection) is selected.

  Is there a script that I could use to get the which?

  Your help is very appreciated.

  

  getSelectedAction()
  function getSelectedAction(){
      var ref = new ActionReference();
      ref.putEnumerated( charIDToTypeID("Actn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
      try{
          var desc = executeActionGet(ref);
      }catch(e){ return; } // no action selected
      var selectedName = desc.getString(charIDToTypeID("Nm  "));
      var selectedIndex = desc.getInteger(charIDToTypeID("ItmI"));
      var parentName = desc.getString(charIDToTypeID("PrNm"));
      var parentIndex = desc.getInteger(charIDToTypeID("PrIn"));
      if(isActionSet( parentIndex, parentName )){
          var setName = parentName;
          var actionName = selectedName;
      }else{
          var setName = findAction(parentIndex, parentName );
          var actionName = parentName;
      }
      return [setName,actionName];
  };
  function isActionSet( parentIndex, parentName ){
     var res = false;
     try{
        var ref = new ActionReference();
        ref.putIndex( charIDToTypeID( "ASet" ), parentIndex );
        var setName = executeActionGet( ref ).getString(charIDToTypeID("Nm  "));
        if(setName == parentName) res = true;
     }catch(e){}
     return res;
  };
  function findAction(parentIndex, parentName ) {
    var i = 1;
    var found = false;
    while (!found) {
      var ref = new ActionReference();
      ref.putIndex(charIDToTypeID('ASet'), i);
      var desc;
      try {
        desc = executeActionGet(ref);
      } catch (e) {
        break;
      } finally {
      }
      if (desc.hasKey(charIDToTypeID('Nm  '))) { ;
        var setName = desc.getString(charIDToTypeID('Nm  '));
          var ref = new ActionReference();
          ref.putIndex(charIDToTypeID('Actn'), parentIndex);
          ref.putIndex(charIDToTypeID('ASet'), i);
          try{
          var adesc = executeActionGet(ref);
          var actName = adesc.getString(charIDToTypeID('Nm  '));
          if(actName==parentName) return setName;
          }catch(e){}
        }
      i++;
      }
  };
  

• Variable that contains the current URL of apex

  Greetings,
  
  Is there a variable that contains the current URL of Apex? I would like to be able to access the current URL in a PL/SQL block.
  
  Thank you
  
  Larry

  See + {: identifier of the thread = 1021135} +.

• How can I get a report containing data on the current month and the next month

  How can I get next month?
  I want a report that include data on the current month and next month.
  
  My solution is "Closing Date". "" Fiscal month "> = Valueof (NQ_SESSION. CURRENT_MONTH)
  S 'closing Date '. "" Fiscal month "< = MONTH (CURRENT_DATE + 30)
  
  But this show only the information between the current month and the date of the day + 30 days
  
  Does anyone have a better solution?
  
  You can meet the next email [email protected].
  
  Greetings!

  GON,

  Add the near field date in your report, add a filter and choose between. Place the cursor in the first box and select Add - SQL expression, paste into the first expression that I gave you. Repeat for the 2nd box and voila it will filter you need. If you are unsure, then use the superior / equal to the value for the first term and the lower than the 2nd.

  see you soon
  Alex

• Behavior of the filter action "stop filter execution.

  What is the intended behavior of the filter action "stop filter execution"? I can't find any recent documentation on this issue. When part of the filters manually execution, "Stop filter execution" is intended to stop all other filters for all messages if the filter that contains both matches? This seems to be the behavior for me. When included in the first several filters filter, only the first filter matches and the log only shows instances of correspondence of the first filter, although several other subsequent filters must correspond to several messages that don't match not the first filter.

  I appreciate the functionality of Thunderbird filters, but I try to find a solution to implement more complex logical Boolean to move messages from my Inbox with the help of manually run filters. I have several filters put in place to classify the messages, but I want to implement filters such that they are not applied to tracked messages. Currently I have the logic in most filters do not match a favorite message using the option 'Match all the following', however this prevents the use of the logic of the GOLD in the filter and led to an increase in the number of filters. I want to set up the filters as a first filter messages from games played and prevents other filters running only for messages that match the filter first.

  Maybe the behavior I see is a bug specific to my system, but I would like to get a confirmation on the expected behavior and see if others have encountered this problem. I work under the assumption that the behavior of "Stop filter execution" must stop subsequent treatment only for messages on which a filter containing is as indicated in the old post to https://groups.google.com/forum/#! topic/mozilla.feedback.thunderbird.prerelease/rUXaQ0NdZvM, but this assumption may be wrong.

  Any help or suggestions are appreciated.

  OK, it seems that this is a bug documented, for example to https://bugzilla.mozilla.org/show_bug.cgi?id=552936. I should have searched for bug reports before posting here. I follow things with bug reports. Thank you.

• SOA 12.1.3 ORABPEL-02118 - variable is not declared in the current scope

  Hello

  I'm trying to run a code example for the conversion of input XML XSD inside BPEL (SOA Suite 12.1.3). )

  1 file xsd

  <? XML version = "1.0" encoding = "windows-1252"? >

  " < xsd: Schema container = ' http://www.w3.org/2001/XMLSchema "xmlns =" " http://www.email.org "

  " targetNamespace = ' http://www.email.org "elementFormDefault ="qualified"> "

  < xsd: element name = "email" >

  < xsd: complexType >

  < xsd: SEQUENCE >

  < xsd: element name = "ovdTriggeredDate" type = "xsd: String" minOccurs = "1" / >

  < xsd: element name = "query" type = "RequestType" / >

  < / xsd: SEQUENCE >

  < / xsd: complexType >

  < / xsd: element >

  < xsd: complexType name = 'RequestType' >

  < xsd: SEQUENCE >

  < xsd: element name = "requestId" type = "xsd: long" minOccurs = "1" / >

  < xsd: element name = "service" type = "xsd: String" minOccurs = "1" / >

  < xsd: element name = "action" type = "xsd: String" minOccurs = "1" / >

  < xsd: element name = "customer" type = "xsd: String" minOccurs = "1" / >

  < xsd: element name = "delivery" type = "xsd: String" minOccurs = "0" / >

  < xsd: element name = "local" type = "xsd: String" minOccurs = "0" / >

  < / xsd: SEQUENCE >

  < / xsd: complexType >

  < / xsd: Schema >

  2 BPEL code

  < variable name = "emailVar" element = "ns3:email" / > / / variable of type XSD

  < variable name = "emailDataVar" type = "xsd: String" / >

  < assign the name 'Assign2' = >

  < copy >

  < from > "& lt;" Email & gt; & lt; ovdTriggeredDate & gt; 16thFeb & lt; / ovdTriggeredDate & gt; & lt; request & gt; & lt; requestId & gt; 1111 & lt; / requestId & gt; & lt; Service & gt; OVDOngoing & lt; / service & gt; & lt; action & gt; Retry & lt; / action & gt; & lt; customer & gt; Batch & lt; / customer & gt; & lt; delivery & gt; Email & lt; / delivery & gt; & lt; local & gt; & lt; countryCode & gt; U.S. & lt; / countryCode & gt; & lt; languageCode & gt; English & lt; / languageCode & gt; & lt; / settings regional & gt; & lt; / request & gt; & lt; / e-mail & gt; "< / from >

  < to > $emailDataVar < /pour >

  < / copy >

  < copy >

  < from > ora: parseEscapedXML (ora: getContentAsString (bpws:getVariableData('$__emailDataVar__'))) < / from >

  < to > $emailVar < /pour >

  < / copy >

  < / assign >

  < / details >

  Get after exception when I run the application.

  < detail >

  XPath expression cannot run.

  An error occurs during the processing of the XPath expression; the term is ora:parseEscapedXML (ora:getContentAsString (bpws:getVariableData('$emailDataVar'))).

  The XPath expression cannot run; the reason was: ORABPEL-02118

  Variant could not be found.

  The variable '$emailDataVar' is not declared in the current scope. All variables must be declared in the scope before accessed. Component DN is "default/Project1!1.0*soa_c1383edb-7f32-4860-8d21-82d312a0e1da/BPELProcess1" and the corresponding Instance Id is 20 042

  There was an internal error. The flow was not generated correctly by the BPEL compiler.

  Contact Oracle Support Services. Please provide definition component of the "default/Project1!1.0*soa_c1383edb-7f32-4860-8d21-82d312a0e1da/BPELProcess1" trail and verification of instance id 20 042 using enterprise console manager.

  . Check the detailed origin described in the text of the exception message and verify that the XPath query is correct.

  -------------------------------------

  There is a solution, I found in the forum to add the following in bpel code. (Problem of access to the variables in BPEL - ORABPEL-02118)

  <>configurations

  < property name = "keepGlobalVariables" > true < / property >

  < / configuration >

  
  

  But when I add <>configurations in 12.1.3 BPEL, editor-in-Chief is showing 'element configurations is not supported'.

  
  

  Appreciate your quick help.

  Thank you

  Cdhar
  

  Hello

  The problem is "$", you don't need a dollar in this case

  bpws:getVariableData('emailDataVar')

  Please mark this message as useful/correct if it helps.

  Concerning

  Pradeep.

• GoTo PDF named destination link with the current zoom level

  Hello

  I created the PDF file of 3B2 software with a lot of links and bookmarks, links with documents created with the bookmark named destination names.

  When I click the link to navigate the document with, it will be the location of the bookmark goto and zoom level will be changed to "ADJUST to WIDTH" but I want to go through the document with the current zoom level from the link where I clicked.

  For this process, I tried a method which is javascript in link action.

  Using the properties of the links of

  Action-> Add Action-> Action of selection (running Javascript)

  Script

  
  

  main()

  main() function

  {

  Zoom var = this.zoom;

  This.gotonameddest ("BK1");

  This.zoom = zoom;

  }

  By this method, I get what I'm looking for, but I'm having a problem.

  First I'll goto who book a page marked with and after that only it fits its current zoom level, so when I go to previous view it will be zoom goback "ADJUST to WIDTH" level, if this method does not.

  And also I am not able to change all the links in my PDF document by manually.

  So please advice me which is just way to browse the document with the link current zoom level where I clicked.

  Note:

  The output PDF document will contain 100 number of links, so I want to update all the links with my requirement by automation.

  Is there a way to manage this process by Acrobat SDK with c#, .NET

  Respect of

  Thirusanguraja V

• How to restart the current slide in captivate?

  Hi all

  I have a slide in captivate 4 that contains several boxes that appear in the same place as the last when we click on an "ok" button (I use the chronology of fade in and out relevant legends). The customer asked when you get to the final, a watch reset button which will reload the current slide, so you could read it again, if you need (weird!).

  I'm sure the answer is obvious in the face but can't find a relevant action for the button. Could someone help please!

  Thanks in advance

  Chris Maile

  Hi Chris,

  Try to resolve your problem:

  slide1 is the slide where - that you want a button that takes the departure of slide1.

  1 have a fake Blade (say D slide) just before the slide 1.

  2 have a button on slide 1 which would have 'Jum'a drag' action and would take the user to the D slide.

  3. ask to "go to the slide" action on the OnSlideEnter bone slide D and go to slide 1.

  Let me know if this helped you to solve the problem.

  Manish

  http://blogs.Adobe.com/Captivate

• How read the Archive.msf and .sbd files stored on the backup media without restoring the current profile?

  I have stored vast e-mail Archives of files on backup media to free hard drive memory. How to read Archive.sbd and Archive.msf selected files without restoring them to the current profile? Can I create a new profile and restore it temporarily?

  Tbirds mail-container has a pair of files

  (1) - name of the container (with no extension) here are all the emails one after the other.
  (2) container - name.msf one type of index, if deleted itwill be restored

  If there is any subcontainers, there is also a container - name.sbd which is a directory (map)
  In this directory there are new pairs or even directories.

  Files without extension is the mbox files. As they exist even when there is simply a directory .sbd and not emails, you need only point to this mbox (empty) file to load the tree entire (folder - map-) use the ImportExportTools add-on.

• Is it possible to have the 'Home' icon to open a new tab instead of replacing the current page to the homepage?

  I would prefer the 'Home' icon on the Navigation toolbar to open a new tab instead of replacing the current tab with the homepage. Is there a way to do this?
  Thank you.

  If you middle - click the home will open a new tab that contains the home page.

• After you type the master password in session can force type master password once again without ending the current session and start new session?

  Sometimes after using the password to access an account during a given session of firefox, I want to "repeal" this ability of automatic access (i.e. require type the password again once) without having to put an end to the current session and restart firefox.

  It's nice to only have to type the password once per session, there are times when after launching an action that I would let the browser unattended for a short period but to prevent others to access sensitive information on other sites if they can't my master password. Note that this is not the same thing as "locking the browser. Currently, the only way I know to force it is to kill the session and restart the browser but it's not very satisfying if I really want to stay connected (allowed) to a particular site. I hope that adding a button in the Security tab "requires the master password for the current session" would be a simple solution to implement? Thank you for your attention.

  You can connect from the software security device (e.g. click Cancel in the dialog box display the passwords) to force them to return to the MP once more.

  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • Tools > Options > advanced > encryption: Certificates > safety devices: software security device: Logout button

• Re: Is it possible to create the current configuration of the software recovery disk?

  I recently bought A350. Next to the standard software provided by Toshiba, I bought and installed other products such as Norton Internet Security, update all drivers, etc..
  Is it possible to create a recovery disc on my current setup of the software?

  I know the recovery disk, but it will only restore the original configuration of the software. I don't want to go through all the pain of installing other products and update all the drivers.

  I have been using other software like Acronis Disk recovery, but I don't know this recovery cd created by these third party software can be used.

  Everyone has known about this?

  Hello!

  Boyfriend sorry but it is not possible to create a recovery disc with the current configuration of your software. The Toshiba Recovery disk contains the factory settings and t, you can integrate additional software to the image.

  If you want a picture of your laptop with your special software, you need to use another program like Acronis image. So you can make an image of your HARD drive with all your settings and software.

  Good bye