Container for several tables of different length

Similar Questions

• Implementation of dumps for several table

  Hello
  Is it possible to configure the < dumps-plan > element or implement dumps to get data from multiple
  table. Currently the sample xml and dumps in the tutorial is configured to a single table.
  
  Thank you
  -Trapani

  Hi Thiru,

  As Rob mentioned, you can implement dumps to do just about anything you want: do a join between tables, run several queries for data from multiple tables or even access non-base data system, such as an existing system or a web service to retrieve the data. Consistency really cares how you implement your cache store and where you get the data, as long as you return a single object to the load method, which must be inserted in the cache the cache store is set up for (or in the case of loadAll, many objects in a map).

  However, what I didn't understand not your question is if you want to load the data of several related tables to create a single object (an aggregate in DDD terminology), or if you want to create different entity objects based on the data in each table and put them all in the cache. Normally, you should have a cache by entity type, while the latter is discouraged until you know exactly why you do and are recommended to create a separate for each entity type cache and use different cache stores for them. Otherwise, you will encounter issues if you try to index your cache or run queries on it, because these characteristics depend on the schema of compatible entry.

  However, if you load an aggregate, you can decide to store the entire aggregate object in a single cache, in which case you will probably eventually query several tables related to construct an instance of an aggregate, or you may decide to store root cluster in its own cache, and separate the low related entities in caches, once again a cache by entity type. The choice should really depend on the size of small entities within an aggregate and access model data, so it is difficult to provide general guidance. However, if you do not end up storing weak entities in separate caches, it is usually advantageous to use the key association to ensure that they are located in the same partition as their aggregate root.

  Kind regards
  ALEKS

• Interleaving of samples: two outputs analog (tables with different lengths)

  CHAN                   AOCHANNEL1       AOCHANNEL2       AOCHANNEL1           AOCHANNEL2       .. .and so on
  
  SAMP                   * * * * *           *              * * * * *              *           .............and so on

  Hi guys, how could I go on the interlacing of two arrays of different lengths in a two-channel analog output?

  In the illustration above, for example, I like to write 5 values in channel 1, followed a string of unique value 2 and so on...

  I use DAQmx library controls to achieve this (not LabView).

  I am able to write unique values each time a task is opened without any problem, I was wondering if I can interleave the berries so that values are buffered and tasks are performed with greater haste.

  best regards,

  Ravi

  target met: I've made the following changes:

  CREATION OF TASK 1
  
  CREATION ANALOG_VO channel 1 & channel 2 in TASK 1
  
  CONFIG. CALENDAR OF TASK 1
  
  CREATED some TENSION with SAMPLES interleaved pre
  WRITING TASK 1 VALUES
  TASK 1 STARTED

  
  
  DAQmxCfgSampClkTiming(taskHandle1,"",SAMPLING_RATE,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,2*SAMPLE_SIZE_WX)
  
  
  

• scroll bar for both tables of different size

  Hello world

  I am applying for thermocouples. Application is working otherwise fine, but I can't make two tables of different size scrolls with a scroll bar. I've attached a picture to make it a little easier to understand. In the photo you can see that there are two tables. Superior is 1 d including channel names. Below is a table with time and the measured temperatures. Vertical scrolling works very well that only the lower table must be the object of a scroll. But if I want to scroll horizontally, I also need to scroll the top table so that the channel names and measured temperatures would correspond. This is the problem that I have not been able to solve. The lower table can 'constantly' update (vertically) because the measure may be underway. I tried to use nodes property tables below top table of controls (IndexValues). I found many many solutions that work with the same dimension tables, but I couldn't manage so that they work with my application. Anyone have any ideas? I use LV 8.6

  Thank you

  Mika

  Also consider using a Table, where the built-in column heading allows to scroll the data, and it is the only control header & data.

• Matching color race for several objects of different colors at the same time

  Hi people,
  I was wondering if anyone knew a way to change the stroke color to match the fill color (or add a stroke color in the case of no current line) for several objects at the same time when the objects in question have a variety of different fill colors.
  I can't seem to find a way and doubt one exists, but maybe I missed something or there is a suitable script.
  Any help much appreciated.

  Thank you. !

  (With the help of: Illustrator CC 2014 for Mac)

  try this script,

  // matchStrokeToFillColor.jsx
  // carlos canto 07/01/2014
  // https://forums.adobe.com/thread/1511792
  
  function main(){
  
      var idoc = app.activeDocument;
      var sel = selection;
  
      for (a=0; a		   

• granting of privileges to the schema for several tables at the same time... any script?

  Hello gurus,
  
  I have about 25 tables in the ABC scheme
  
  I want to give all privialges to the XYZ schema for all tables of 25 which is in the pattern ABC... So is there is SQL statement or a script, I can run to grant privileges to all tables.
  
  Something similar to these...
  
  

    SELECT 'create synonym ' || table_name || ' for ' || table_name
    FROM user_tables  {code}
   
  So i get all the table names ....then i can run as a script.... U r help is greatly appriciated gurus!!!
  
  
  Thank you!!!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    

  Administrator:

  set head off
  set pages 0
  set feed off
  spool myscript.sql
  Select 'grant select, insert, update, delete on abc.'||table_name||' to xyz;'
    from dba_tables
   where owner = 'ABC';
  
  Select 'create synonym xyz.'||table_name||' for abc.'||table_name||';'
    from dba_tables
   where owner = 'ABC';
  
  spool off;
  

  Obviously this does not all new table that will be created in the future on ABC schema...

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/02/07/aggiornare-una-tabella-con-listruzione-merge/]

• EO for several tables

  Hi all
  
  In the new page that I created, I have more than 8 tables I should use to display the data in the page. Also when I try to save the page, the data is saved using the API seeded. In this situation,
  
  (1) how to use the objects of entity for 8 different tables? Can I create associations between all these different tables?
  (2) that I need to record data using the API, I extend the OAPlsqlEntityImpl class in the EO. So, in this case, all postings must be done using getters and Setters at the level of the VO or EO?
  
  Please advice.
  
  Thank you all
  
  KK

  Hello

  1) Set the Foreign key using setAttribute Methods ? 
  

  When you create a VO based on multiple EO, there should be a link between these Office of assessment as primary key & Foregin key 8. And when you share a commitment that the value of your beans will be saved to the database. But the foreigner, you will need to set independently using setAttribute method because it will not be saved by his own.

  2) If i'm doing the validations at EO level, those setters and getters will be called before the Create(), Update() and Delete()
  methods in the EOImpl class. Is that true?
  

  Yes, you are right, it is called to create and update operation, but not to delete.

  Kind regards
  GYAN

• SQL Help: Add flag for several tables

  Hello

  I have an existing SQL as follows:

  Select the storeId field,

  (select case when count (1) > 0 0 otherwise then 1 end)

  of tb_bbb

  where tb_bbb.id = tb_base.baseId) AS conInd

  of tb_base;

  I would now add the table tb_ccc for the value of conInd. I try the following SQL:

  Select the storeId field,

  (select case when count (1) > 0 0 otherwise then 1 end)

  Of

  (select tb_bbb.id where tb_bbb.id = tb_base.baseId)

  Union

  Select tb_ccc.id where tb_ccc.id = tb_base.basdId) AS conInd

  of tb_base;

  However, it does not work. Any idea on this SQL?  Thanks for your help!

  Hello

  Here is another way, which may be more effective because it uses EXISTS (which can quit smoking as soon as it finds a match) instead of COUNT (who continues to go, so he can tell you if there are 999 or 1000 matches, even if you don't care to).

  SELECT storeid

  CASE

  WHEN THERE IS)

  SELECT 1

  OF tb_bbb

  WHERE bbb_id = m.baseid

  ) 1 THEN

  WHEN THERE IS)

  SELECT 1

  OF tb_ccc

  WHERE ccc_id = m.baseid

  ) 1 THEN

  0 OTHERWISE

  END AS conlnd

  OF tb_base m

  ;

• Synonyms for several tables

  Hello

  I have a trigger which in a specific State, change 14 synonyms of 14 different paintings.

  The official documentation is not possible to create the synonym of more then one table at the same time.

  You know some tricks to simplify this operation?

  Thank you

  Ste

  Ste74 wrote:

  DB architecture, I have three 'groups' of tables (with 7 tables) with the same structure but different in data.

  Simply create an additional column of ACTION_GROUP and 7 tables with the same structure as those that already exist. List the tables of newly created partition by column ACTION_GROUP create 3 partitions with the values 1, 2 and 3. Add the ACTION_GROUP column to each of the 21 existing tables and tables 1 to the tables of Group 1, group 2 and group 3 3 table 2. Now, you can fill each partition table newly created through the exchange of the partition corresponding get and group the data in table rid your 21 original tables. Now you have 7 tables and all you need is WHERE ACTION_GROUP = added to your queries. Actually, same approach might work even without partitioning - you simply need to use insert instead of exchange of the partition.

  SY.

• Trees does not not in 4.0 for several tables

  I built the query:
  
  Select case when connect_by_isleaf = 1 then 0
  When level = 1 then 1
  of another-1
  end the status,
  level,
  name as title,
  NULL as an icon,
  ID as the value,
  NULL as ToolTip
  
  de)
  To_char (nihub_qa_group_id) SELECT ID,
  NULL as parent,
  GroupName as name,
  NULL link,
  NULL a1,
  NULL A2
  OF nihub_qa_groups
  UNION ALL
  SELECT to_char (nihub_qa_group_id): ': ' | TO_CHAR (nihub_qa_tables_id) as id,
  TO_CHAR (nihub_qa_group_id) as a parent,
  table_NAME as name,
  NULL link,
  NULL a1,
  NULL A2
  OF nihub_qa_table_tree_v
  )
  Start with the parent is set to null
  connect by prior id = parent
  siblings arrested by name
  
  but the tree will not display. I get the error: Warning: tree root ID '10000' could not be found. and when I debug I get errors: ORA-06550: line 34, column 34: PL/SQL: ORA-00904: "ID": invalid identifier ORA-06550: line 3, column 13: PL/SQL: SQL statement ignored ORA-06550: line 37, column 64: PLS 00364: 'I' use the loop index variable is invalid ORA-06550: line 37, column 15: PL/SQL: statement ignored.
  
  My paintings is quite simple:
  
  nihub_qa_group:
  
  CREATE TABLE nihub_qa_groups
  (
  nihub_qa_group_id NUMBER NOT NULL,
  GroupName VARCHAR2 (255) NOT NULL CHECK (single)
  )
  ;
  
  
  
  ALTER TABLE nihub_qa_groups
  Add a CONSTRAINT "Group PK" PRIMARY KEY (nihub_qa_group_id);
  
  nihub_qa_tables:
  
  CREATE TABLE nihub_qa_tables
  (
  nihub_qa_tables_id NUMBER NOT NULL,
  table_name VARCHAR2 (250 BYTES),
  last_date_loaded DATE,
  last_row_count NUMBER,
  avg_records_loaded NUMBER,
  check_avg CHAR (1 BYTE),
  check_orphan CHAR (1 BYTE),
  check_domains CHAR (1 BYTE),
  check_date CHAR (1 BYTE),
  threshold_plus NUMBER,
  threshold_minus NUMBER,
  date_column VARCHAR2 (255 BYTES)
  )
  ;
  
  
  
  ALTER TABLE nihub_qa_tables
  ADD CONSTRAINT "nihub_qa_tables PK" PRIMARY KEY (nihub_qa_tables_id);
  
  
  
  and nihub_qa_table_tree_v is a point of view:
  
  VIEW to CREATE or REPLACE nihub_qa_table_tree_v (nihub_qa_group_id,
  nihub_qa_tables_id,
  table_name)
  IN SELECT
  nihub_group_table.nihub_qa_group_id,
  nihub_group_table.nihub_qa_tables_id,
  nihub_qa_tables.table_name
  Of
  nihub_group_table nihub_group_table,
  nihub_qa_tables nihub_qa_tables
  WHERE
  nihub_group_table.nihub_qa_tables_id = nihub_qa_tables.nihub_qa_tables_id;
  
  
  nihub_group_table is a correlator group_id and tables_id to support the relationship m:m. when I run the query in Toad or sql command in the APEX, I get:
  
  1 1 UNICA - 10000. -
  2 0 NIHUB_NETINSIGHT_VEIW_PARAMS - 10000:20000 -.
  2 0 NIHUB_NETINSIGHT_VIEWS - 10000:10000 -.
  2 0 NIHUB_NETINSIGHT_VISITS - 10000:30000 -.
  2 0 NIHUB_NETINSIGHT_VISIT_PARAMS - 10000:40000 -.
  1 GROUP 1 TEST - 20000 -.
  2 0 NIHUB_NETINSIGHT_VIEWS - 20000:10000 -.
  
  
  that is what I expect. Here, any help would be appreciated.
  
  Thanks in advance
  
  PAM

  Here is a document to create a tree in APEX 4 via a wizard: http://apex.oracle.com/i/doc/tree_query_create.htm#BABJAGJJ

  Thank you

  Tony Miller
  Webster, TX

  While it is true that technology is waiting for no man; stupidity always stops to accommodate new passengers.

  If you answer this question, please mark the thread as closed and give points where won...

• CREATE VIEW for several tables

  Hello
  
  I have a lot of tables, each of them containing a serial number field, each number is unique all the tables.
  
  I need a notice like this:
  

  SERIAL_NUMBER  |  TABLE_NAME
  ----------------------------
  1              |T1
  2              |T2
  3              |T3
  4              |T1
  5              |T1
  6              |T4

  What is the best way (SQL) to create this view?
  
  Thanks in advance!

  Maybe something like this:

  create or replace view my_view as
  select serial_number, 'T1' table_name from t1 union all
  select serial_number, 'T2' table_name from t2 union all
  select serial_number, 'T3' table_name from t3;
  

• I want to clone my hard drive and this clone allows you to configure a new computer, how do I do this for several PCs with different versions of XP?

  I am trying to replace 15 PCs.  They all have XP because their BONES, bought with different SPs at different times.  They all have been updated to SP3...  They have all MS 2003, upgaded to MS 2007.  I would use a clone as image.  I do not support different key codes?  Although the XP are authentic, I may not all key codes.  My predessor has not keep good records, and stickers on some had labels of Vista.  Even if the PC was bought with XP downgrade.  I need to use XP because of some other software requirements.

  What is the best way to represent all the PC so that I can get back them to my users?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/cloning-Windows-XP-Pro-to-new-hard-drives-ready-to/b7edf501-6ae6-4bc1-94BB-39a4177d8b71

  It will be useful.

• REORG several tables with DEC

  Oracle 11.1.0.6 database
  RHEL 5.3
  
  Hi all
  
  1.)
  
  I want reorg several tables with the ETG. But because there are several tables with different indexes and column names I can not use the order by clause.
  
  create the table reorg_HR_STAGE_EDW. SFHR_ORG_MAPPING_FILE
  tablespace REORG
  PCTFREE 10 pctused, initrans, maxtrans 1 255
  storage)
  initials pctincrease of 1 M following 0M 0
  MINEXTENTS 1 maxextents unlimited
  in select * from HR_STAGE_EDW. SFHR_ORG_MAPPING_FILE;
  
  The table is going to get reorganized even without the orderby clause?
  
  2.)
  The steps I should follow are (please, correct me if I'm wrong):
  
  -Create table with the new name in the new tablespace
  -Remove the old tables
  -Move converted tables to the original tablespace
  
  Is it OK, what happens to the index?
  
  Help, please

  You can also copy dependent table with dbms_redfinition. The procedure is called COPY_TABLE_DEPENDENTS. See http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_redefi.htm

  ALTER table move would also be possible, but doen't it locks the table all the time?

  Kind regards

  -wiZ

• How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for 20 for detail header and 30 for the footer

  How to set a fixed length scheme, composed of several documents of different types, with details of the header and footer in points 22 and 23, namely having 10 for header, 20 for retail and 30 for the footer.

  Here is the sample file

  DDWTYBILL13092502572 1000000112\\NHLSFS\ORACLE\ORACLE\BILLING\VERIFY\ 2013/09/25 01:19:08 BILLEND

  DDWTYBILL13092502572 2000000212PRIVATE PRIVATE STY5572142 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731543 Suspect 91TB? (AC) EMPIEEM A2 Z03.0 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000312PRIVATE PRIVATE STY5572149 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731548 empyema GMP A2 Z03.9 05-AUG-201305-AUG-201324-SEP Z03.9 - 2013FEND 113,60 TYGERBERG HOSPITAL Ward

  DDWTYBILL13092502572 2000000412PRIVATE PRIVATE STY5572351 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731584 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000512PRIVATE PRIVATE STY5572352 010700 INV 12STYD000789 02-AUG-20130000010472 STY STY 1100611006MGIT NNM DIMPHANA, CN, CELESTE NERINA 9 January 1964 TYG A2 DR OF PREEZ 5602181 63301345 TB731585 Suspect 91TB? EMPIEEM? CA Ward HOSPITAL TYGERBERG Z03.0 Z03.9 A2 05-AUG-201305-AUG-201324-SEP-2013FEND 113,60

  DDWTYBILL13092502572 2000000612MAJOR MAJOR STY5577530 010700 INV 12ZTYG000009 02-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS ZOZI, S, SIYAMBONGA 27 March 2010 TYG D3 DR MARCELIN 5602181 113799662 TB731663 lymphadenitis Ward D3 TYGERBERG HOSPITAL I88.9 Z03.9 07-AUG-201307-AUG-201324-SEP H1 - 2013MEND 58,52

  DDWTYBILL13092502572 2000000712MAJOR STY5577537 MAJOR 010700 INV 12ZTYG000009 06-AUG-20130000010472 STY STY 1100611006MGIT 91 NNS DLAMINI, N, SIMON TYG 9 October 1976 F1 DR WZESE 5602181 135524676 TB731666 Suspect Ward TB F1 TYGERBERG HOSPITAL Z03.0 Z03.9 H1 07-AUG-201314-AUG-201324-SEP - 2013MEND 58,52

  DDWTYBILL13092502572 30003034120000003032END

  You can create a nXSD the use of the Native Format generator and advanced search attribute is used to read values to a specific position and use it as the choice. You can find an example here

  http://docs.Oracle.com/CD/E11036_01/integrate.1013/b28994/NFB.htm#BGBBAJFD

• How to create a large group of tables of all different lengths

  Hi all

  I want to create a 2D array that has two coloums and X number of rows (possibly in the hundreds). The first coloum must have a calculated average for this line. The second coloum should have a gap with the average assosiated. I struggle to get to this point. I know how to aqquire the set of values that should be considered for each mean and STD and I also know how to calculate the average and std.

  A loop will tell me what is the value of tag and which line in X put in. I want to be able to have the X number of tables each representing a row with values before calculating the avg and std. Each table would be of a different duration.

  I don't know how tag on the unique values of the loop to the appropriate line to create the Group of X tables.

  The only way I can think to do is the initialization of a 2D table large exessvly and replacing the first available null in the row with the value form the loop. Then only, I wouldn't consider zeros when I do the final 2D picture. What I don't love about it, is that it would be exesive and it is possible that there wouldn't be enough zeros for all the values that I wanted to consider in a specific line.

  I do not want to calculate averages and STDS for every line, every time I have add a value from the loop either. That would allow me to pass the table groups but would also slow the program. Can someone give me some advice on how to run this? Thank you in advance!

  MechaCool

  Use a cluster.  In your case, the cluster contains a data table and two digital inputs for the mean and std dev.  Look at the joint.  I created a control of Type Def the type of data I think you want.  In vi, you can see how to use the cluster to write your data.  For multiple series of data, you would have a picture of this cluster.  Each could have an array of different lengths and his averages dev partners and STDS.