Continuous sound with built in speaker, MIC works not, echo problem

Similar Questions

• How can I get my headphones or my built in speakes to work in my computer.

  The speakers on my monitor will not work. And won't be in the head when I plug them in phones. I had the headset working for a little while, and then they just stopped. I ran a scan on hardeware and devices and the helmet worked for one minute in the event of a problem, but they kept blacking out and make a funny noise. Tried to run the scan three times and I can't get to work at all. I don't know much about computers and have no idea what im doing. Please help, need noise, very frustrated.

  Hi kelliemattingly,

  I suggest you try the steps from the following link:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Why my laptop built inn speaker always works, even I put the audio jack on it?

  I often use amplifier when you play music or watch movies for an excellent sound quality and sound effects available on my lappy would be much appreciated when it is used on the speakers... ut now when I put audio jack on my lappy notification "I YOU JUST PLUGGED A DEVICE IN THE AUDIO Jack" does not make out like it usually did after that I took audio jack on it.. ' " and the result was... from two portable and amplified sound announcement pregnant... it bass was gone... looks like a 'speakers canned.

  Hello

  1. have you made changes on the computer before this problem?
  2. which version of the Windows operating system is installed on your computer?
  3. are you an error message or error code?
  
  I suggest you to consult the following Microsoft article and check if it helps.
  
  Tips for solving common audio problems: http://windows.microsoft.com/is-IS/windows7/Tips-for-fixing-common-sound-problems

• HP mini 1000 internal mic not working not, driver problem?

  Recently I tried to video chat with my friend and the video worked fine and I could hear, but he couldn't hear me.  I did a test, and it seems that my internal microphone does not work, or there is a driver issue (I hope that the problem of driver).

  Does anyone else have this problem?  Is there a way to fix it?

  Thank you

  AHA, thought it myself, just had to go to control panel-> sounds and audio-> change the entry for internal microphone.

• Tx2500 with Windows 7 pressure sensitivity works not

  Hello

  I've recently upgraded to a non - OEM version of Windows 7 Ultimate 64-bit. I use Photoshop a lot so I quickly noticed that, while the touch screen worked, and the pen worked, I have no pressure sensitivity which is really important for my style of art.

  If someone has installed Windows 7 on a TX2500 and had this problem? Any possible solution? We tried phone support, but they were unable to help him. I really like 7, and I don't mean to go back into the fight, if possible (I formatted the recovery partition = /) to go back to Vista.

  Thanks for your help guys!

  We tried to install the drivers Wacom Penabled from here: http://www.wacom.com/tabletpc/driver.cfm

  For HP, it's about ticket #: 8031483980 and it is not solved yet.

  Sorry guys, see my post below.

  Message edited by Mahon on 05/11/2009 17:54

• No sound in the built-in speaker for laptop

  The built-in speaker stopped working after I did the helmet, then the external USB speakers default devices. Even after the default internal speaker, it does not work. In addition, in Skype, we do not hear the other party if they can hear us. The sound of the call is only issued via the loudspeaker or a headset. It is not a problem with the microphones of the other party. It is not a problem with the volume was low or off. All these basic checks have not helped. could someone please help? BTW, I have a laptop Dell Vostro 1014 with Windows 7.

  Hi MaitreyiKollegal,

  Thanks for posting your question in the Microsoft Community forums.

  Do you get any error messages?

  Method 1:
  We will first perform this troubleshooting and check if it helps.

  Diagnose and solve the problems of Windows audio playback automatically
  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 3:
  If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

  Check out the link:
  http://www.Dell.com/support/drivers/in/en/inbsd1/product/Vostro-1014

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

• Satellite U920T - sound with headphones quiet and distorted

  Hello

  I have the following problem with my U920T. The sound with built-in speakers is perfect, but if I use headphones, the sound is very quiet almost unhearable.
  I tested several helmets und different settings of the software. I also tried to install all Windowsupdates and driver updates the BIOS including Toshiba homepage n realtek drivers.
  Now, I have reinstalled Windows but the problem persists.
  I still think is a driver issue, but have no idea what to do now.

  I hope for quick help

  cordially 7even

  That s really strange, but I think that there is problem with some incorrect settings.
  I don't know how do you test your helmet but make some tests with browser player.
  Open Internet Explorer, open the test page. Start, for example, my favorite In the Mix radio click with the left button of the mouse on the "speaker" icon and open the option when running music mixer.
  Your IE it will appear there. You can move the volume level for speakers but for IE too.
  Two of them on the 50% and check if the problem persists.

  I use headphones often enough but I've never noticed this problem.
  Please test and send feedback.

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• internal mic not working not not on my iMac with El Capitan

  internal mic not working not not on my iMac with El Capitan?

  Please open the sound pane in system preferences and select the Input select the input device (it should be on the list) and move the input volume slider all the way to the right.

  Speak into the microphone. You shouldn't yell. The entry level indicator reacts?

  If not, and if there are other devices of entry in the list, do they work? What is?

• Built in speaker does not work when I pull the external speaker cable

  I have 2 speakers system and external speaker. My external speaker are out of order, so I pull his cable system but now built in speakers are also not working. Volum icon shows with cross and no speakerphone and headset available. Any solution

  Hello
  When you said "pull the cables" do you mean deleted the connection to the motherboard / sound?
  1. make sure that each connection is connected.
  2 reinstall the audio drivers.

  Click on Start , then Control Panel

  Select the material and audio and noise
  Under playback.. What icons you see?
  Click Properties and then click headset/speakers
  According to the levels... is at 100% and not CUT?
  Under Advanced... What is the default format?
  Click test... do you get a sound?

  b Eddie

• HP EliteBook 850 G3: No audio for no built in speaker and headphone with jack after driver and windows update

  Hello

  I just made some updates driver and windows (windows birthday) and after installation I have not any sound with the built-in spaker or with my headphones plugged with one taken more. But with a usb headset it works!

  When I go to the window of Windows playback devices there is no device present.

  I already update the Audio drivers and reboot to run the tool in solving audio problems in Windows, but nothing new, it does not.

  Gauthier

  Hi Gunthar,

  Give the driver following a shot

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

  This driver solved the same problem we had with our Elitebook 840 G3

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• built in mic does not work

  my laptop is equipped with a microphone, but it is not detected in the audio options, how to use it?

  Hi toadfan321,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. What is the number and the model of the laptop?

  I suggest that you download and install the latest sound card drivers on the laptop manufacturer's site computer and check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  To set up a microphone

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/speech_setup_microphone.mspx?mfr=true

  To configure the microphone

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/speech_sr_microphone_configure.mspx?mfr=true

• XPS 1530 internal mic not working not not with Vista

  XPS 1530 internal mic not working not not with Vista

  Hello ThomasBarnette,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, it seems that you are having problems with the internal mic.  As I understand the internal microphone does not work.

  Download and install the drivers for the Chipset from the link below and check.

  http://www.Dell.com/support/drivers/us/en/04/product/XPS-M1530

  Answer to us if you are having problems with the internal MIC or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• is there a problem with dmhx wierless speaker jam? mine does not work and I am sure that they are correctly installed

  I installed dhmx jam wireless speakers in my windows of the bridge 8 and he will not play again

  Hi Jan,

  I understand that DMHX wireless speakers do not work on your computer Windows 8.

  1. do you get an error message when you try to use the DMHX speakers with the computer?

  2. What is the model of the enclosure of ham HMDX?

  3 have you tried to use these speakers with another computer?

  I would suggest trying the following steps and check if it helps.

  Method 1:
  

  Run the hardware and devices Troubleshooter
  

  a. press the Windows key + X and then clicking Control Panel.
  (b) in the search box, type troubleshooting and then click Troubleshooting.
  c. under hardware and sound, click on configure a device.
  NOTE: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 2:
  

  Check if the Bluetooth support Service is started by following the steps below:

  a. symbol Windows + R press keys simultaneously on and type run, services.msc, press ENTER.
  b. right-click on the Service of Support of Bluetooth and click on start or restart.

  Method 3:

  
  I suggest you to refer to the procedure described in the links for how to turn on Bluetooth.

  Why Windows is not find my device? :

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device #section_4

  What happens if a device is not installed correctly?

  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Add, view, and manage your devices and printers:

  
  

  http://Windows.Microsoft.com/en-us/Windows-8/install-view-manage-devices-Printers

  Configure your devices:

  
  http://Windows.Microsoft.com/en-us/Windows-8/set-up-devices#1TC=T1

  Listening to your device via Bluetooth wireless

  http://www.hmdxaudio.com/Media/documents/hmdxaudio/instructionbooks/HX-P230_EN_IB.PDF

  If the problem persists, I suggest you to contact support HMDX.

  http://www.hmdxaudio.com/hmdx-support

  If you have any additional questions or for any question related to Windows, feel free to post. We will be happy to help you.