Continuously acquire, analyze, and plot data

Similar Questions

• acquire, analyze, and log data using the technique of the statemachine

  I'm technical state machine learning to develop code to acquisitoin of data and logging. I think I wrote the correct code for this purpose, but I couldn't have done the following:

  All the values(>0) of warning should appear on table 1 d on the façade. The code is written only the first value.

  All values must be recorded using to write to the palette of the spreadsheet and written on the excel sheet. Code is only writing first value.

  I wonder what is the error. The code I created is attached, I would be grateful if someone fix the code and post in response.

  Thank you in advance for help

  See you soon

  Hi kwaris,

  "What is the error": well, you use a lot of unnecessary conversions. Really a lot of...

  Why do you convert a dynamic scalar value, then convert to table, then index an element of the array? Why convert to dynamic when everything you needis a simple "build table" node?

  OK, I've included a shift register where you will store your table. It of just a simple 'how to', but not the best solution for all cases. But it should give you a clue...

• DAQ Assistant Express Vi to acquire and generate data at the same time in LABView

  Can I run acquire it and generate the Express Assistant DAQ Vi at the same time in a LABView program? I am using LABView 2010.  It's acquire and generate a NI USB-6009.

  Thank you

  Mary

  You can acquire and generate the same VI but obviously you can't generate a wave form unless you do a single point at a time inside a loop with a sample on request and can live with low samples/s specifications.

• I have a PC with Windows 7 Professional and Adobe Reader.  Adobe continued auto changing all the dates in a PDF document.  Help!

  I am doing an interactive PDF for an insurance company.  The form has several dates that should be filled, as my DOB, date of the training and the date of the current medical certificate.  If I enter data in one of the date fields, it automatically changes all dates.  Of course, these dates are all different, but it does not make them different.  This happens also for address fields.  I have to be able to enter my home address and the address where I completed my training.  I went to: Edition-Preferences-Form and not the box 'automatically calculate field values' and 'AutoComplete' off.  Changing always automatically all similar fields with the same data!  Help, please!

  It occurs because the form designer has done a terrible job in this area and just copy & pasted fields, which means that they are identical copies of each other. You can not do something to prevent that from happening. Report the problem to the insurance company. They have to sort on their end.

• Using the calendar function to select and read data from MS access tables?

  Hello

  I woke up in the learning of database in no time. I'm using Labview 9 to create a table based on DDMMYY hhmmss format. I can write data to the table in access. The picture will be 24 hours before a new table will be created. However, I find that this concept is not very gd as time goes by, I'll have a lot of paintings for example after 6 months.

  1.I would like to create a calendar (similar to the system clock) in labview, through which the user can click and select, which will then open and retrieve the data. Inorder to do I think I need to create queries and the relationship in MS Access? can any1 advice? Please give as much detail as possible.

  2.i can access data and display in labview. However, I want to display the data and plot in the chart. For instance, coloum b, c and trace on the graph in a proceeding for the analyst.

  3. how to generate a report to an email in a file to document the daily data inserted. I can do it in labview?

  Any help would be much appreciated.  If you have examples of code and don't mind not to share, I would be very grateful.

  Thanks 1million

  
  

• Upon resuming from hibernation my computer asks continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use?

  Original title: F8 and troubleshooting.

  After starting my computer Gateway Profile4 after hibernation, I wonder to continue logon or delete restoration data. Restore data refers to a previous restoration or a restore point that was created for later use? If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

  original title: after waking up from hibernation, he asked me to continue logon or delete restoration data.

  Recently, I had this problem.  This link above (http://support.microsoft.com/kb/294427) helped me.

  Basically, it seems to be a corrupted restore point created to go into hibernation.  I think that the system wants to remove that restore point and reboot "fresh."

  Restore data refers to a previous restoration or a restore point that was created for later use?

  
  

  A previous restore point.

  If restoring the use of revert to a previous state, you can cancel that catering is also created which I think could be is requested.

  
  

  If I understand you correctly, no.

  Hope this helps

  -Rich

• My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files

  I'll provide too much information because those of us who are computer knuckleheads think that everything is important since it is a mystery to us.

  My main computer crashed and the data has been retrieved from the hard drive, including all of my Outlook Express dbx files. There are four years of e-mails in these files and critical that I be able to open them.

  My only working computer running XP. It has Outlook Express is installed on it and was once used for e-mail, but not more and not implemented with my ISP to send or receive if it matters at all. Other that the sending and receiving of all the other functions of the OE program appear to be operational.

  I have read many explanations on how to open the files dbx on different sites - all is completely different and most seem well beyond my skill level.

  There is a fairly painless way to open these files? I don't want to try anything that could damage them. Please... any solution please guide me through in its simplest form - I am 64 but pretend you are explaining the process to a 7 year old. Yes, I'm that lame!

  Sorry for writing a novel and thank you to all who take their time to help the ignorant!

  I advise you to immediately copies of your DBX files restored. Save the duplicates in a place safe, and don't mess with them.
  Then try using one of the various tutorials that you have found on the Internet by using a copy of your DBX files restored.
  I did it a few times, but years ago and I DBX http://www.techrepublic.com/forums/questions/how-i-open-corrupted-dbx-files-in-oe/ visualization tool
  You just continue to make attempts, using a tutorial after another.
  As long as you have these unchanged copies of backup of your DBX files, you should survive it - other than frustration. Email PC remains a mess.

• Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, he

  Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, it is missing or damaged. Please download and install a new copy ecc ecc. Tried all that but I'm stuck. any help, please? Thank you.

  Hello

  Please try following steps depending on your operating system

  (Windows)

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old and delete the folder Adobe application manager

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

  (MAC)

  (1) close adobe all processes in the activity monitor (cloud Creative), synchronization of the base, CC, ccx, services for the desktop application adobe, adobe office, CIB Adobe updater AAM Broker service

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

• The best location for vcenter VM and placeholder data warehouses

  Hello

  I have an SRM installation with 2 sites.  The sites are separated by metro trunk of layer 2 ethernet between the sites.

  Site has

  1 EqualLogic PS6100

  2 ESX servers configured as cluster

  There is a single data store volume over the San with all virtual machines in this cluster

  There is one instance of vCenter to this place located in the same data as the other virtual machines store

  There are also a few other volumes on the SAN used for the RDM disks in virtual machines

  I also created a small volume of 1 GB as a VMFS data store and have it mapped in SRM to use as a placeholder for a data store

  What are your thoughts on that?  Is this the best way?  I could use the local storage on the ESX servers?  Main VM can be used for fictional settings or my data store?

  SRM is installed on the same VM as vCenter

  MRS. uses SQL Express on the local vCenter VM

  vCenter also uses SQL Express

  Site B

  1 EqualLogic PS4100

  1 ESX Server, so no clustering

  There is a single data store volume over the San with all virtual machines running on ESX Server

  According to the requirements of the SRM, there is a separate instance of vCenter operating as a virtual machine, and it is not in bound mode.  Should it be? / Should it be?

  The number of volumes on the SAN and their goals is the same Site A, the only difference is the size of the volume is smaller because less machines virtual running on this site.

  Replication has been implemented and verified the bi-directional working.

  We use replication on Bay

  OK, here's the problem... When I do a recovery expected, the process stops all the virtual machines on this site that includes the server vCenter/SRM.  I guess that to happen because it's on the same database as my other virtual machines?

  If I run the recovery in emergency mode, vCenter is then moved to the other site and power.  Because the sites are layer 2 and on the same vlan, MRS. watch sites are connected by 2 instances SRM can meet eventhough they are now running on the same site.  This does not seem right to me.

  Can someone suggest a better configuration?

  Thank you

  Brian

  Hello

  There is one instance of vCenter to this place located in the same data as the other virtual machines store

  What are your thoughts on that?  Is this the best way?

  In addition to vCenter VMS residing on the store of data replicated, it's OK.

  I could use the local storage on the ESX servers?

  I think that you can, but it is not recommended, because it creates dependency on the availability of the single ESX host.

  Main VM can be used for fictional settings or my data store?

  I would not recommend this. This will create a mess on the data store. Continue to 1 GB placeholder data store you created and do not replicate.

  MRS. uses SQL Express on the local vCenter VM

  vCenter also uses SQL Express

  Consider that SQL express is adapted to the environment of very small size (don't remember the numbers now). Make sure that you do not exceed the limits.

  1 ESX Server, so no clustering

  There is a single data store volume over the San with all virtual machines running on ESX Server

  This host has sufficient capacity to run all the virtual machines together (Site A and Site B)?

  I recommend having two hosts for prallele and accelerate the recovery process (multiple virtual machines can be powered on simultaneously).

  According to the requirements of the SRM, there is a separate instance of vCenter operating as a virtual machine, and it is not in bound mode.  Should it be? / Should it be?

  You don't have to configure them in bound Mode. This is for ease of management only (license, roles and inventory)

  OK, here's the problem... When I do a recovery expected, the process stops all the virtual machines on this site that includes the server vCenter/SRM.  I guess that to happen because it's on the same database as my other virtual machines?

  Yep, do not put vCenter VM on the VMS data store and reproduce at all.

  If I run the recovery in emergency mode, vCenter is then moved to the other site and power.  Because the sites are layer 2 and on the same vlan, MRS. watch sites are connected by 2 instances SRM can meet eventhough they are now running on the same site.  This does not seem right to me.

  Do not replicate vCenter / SRM VM and that will not happen.

  Michael.

• continue the request despite invalid date in a view

  Hello
  
  SQL:
  SELECT id, bird mydate
  where mydate > = sysdate - 1
  
  Error: ORA-01858, a non-digit character was found there where was waiting for a digital
  
  I'll try to find the record that shows that is not a valid date
  
  on the other will have to do a manual search
  or write a procedure to locate the record
  
  but is it possible to continue the discovered despite the existence of an invalid date?
  with a status column 'VALID_DATE', which show there - valid date and N - date not valid?
  
  Please notify
  
  TKS & rgds

  Should we assume that the MYDATE column is not a DATE? Despite its name, is really a VARCHAR2?

  You can write a function along the lines of

  CREATE FUNCTION my_to_date( p_date_str IN VARCHAR2 )
    RETURN DATE
  IS
  BEGIN
    RETURN TO_DATE( p_date_str, your_format_mask );
  EXCEPTION
    WHEN others THEN
      RETURN NULL;
  END;
  

  and then do

  SELECT *
    FROM your_view
   WHERE my_to_date( mydate ) IS NULL
  

  Alternatively, you can write a similar function that returns 0 or 1 depending on whether the string can be converted to a date in the expected format.

  Justin

• When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  When I send a text message and mobile data are off, it is not given, but I do not see this message for a few minutes. I can then refer using "send as a text message. How can I 'send as a text message' in the first place?

  Disable the iMessage?

• How can I recover the modules and their data from a failed HARD drive (the lost BONE areas, but data files are readable)?

  The HARD drive that was my OS (Windows XP Pro SP3) failed and lost quite a few areas which are essential for the operating system running. Other data is still readable. A got another HARD drive and installed Windows XP SP2, Firefox and other programs. I was able to retrieve the bookmarks, security certificates, and other profile information using the information found in bandages.

  None of them addressed how do to recover the modules or their data. Specifically, there are several large, elegant scripts that took months to develop and customize.

  Articles related to migration and other do not work for me because they require the old copy of FF is functional, that is not because the OS on this HARD drive is damaged. Is it possible to recover these data, similar (or not) about how I could get the other profile info?

  Have you copied the entire folder C:\Documents and Settings\username \Application Data\Mozilla\Firefox\ on the old drive?
  If this is not the case, can you?
  If so, make a copy and save this folder just in case.

  If so, you could replace this folder on the new facility by \Profiles\ [with your profiles inside] folder and the profiles.ini file [delete all other files / folders that may also be in the folder "Firefox"] -and then replace with the same folder named from the old failed drive. Note that you will lose what you already have with the new installation / profile!
  Your profile folder contains all your personal data and customizations, including looking for plugins, themes, extensions and their data / customizations - but no plugins.
  But if the user logon name is different on the new facility that the former, any extension that uses an absolute path to the file in its prefs will be problems. Easily rectified, by changing the path to the file in the file prefs, js - keep the brake line formatting intact. The extensions created after the era of Firefox 2.0 or 3.0, due to changes in the 'rules' for creating extensions usually are not a problem, but some real old extensions that need only "minor" since that time can still use absolute paths - even though I have not seen myself since Firefox Firefox 3.6 or 4.0.

  View instead of 'Modules' I mentioned the 4 types of 'Modules' separately - Plugins are seen as 'Add-ons', but they are not installed in the profile [except those mislabelled as a "plugin", when they are installed via an XPI file], but rather in the operating system where Firefox 'find' through the registry.

  Note: Migration articles can tell you do not re - use the prefs.js file, due to an issue that I feel is easily fixed with a little inspection and editing. I think you can manage that my perception is that you have a small shovel in your tool box, if you encounter a problem you are able to do a little digging and fixing problems with the paths to files - once you have been warned.

  Overall, if you go Firefox 35 35 or even Firefox 34 to 35, I don't think you will run in all the problems that you can not handle [that I cross my fingers and "hope" that I'm not on what it is obvious].

  With regard to the recovery of the 'data' for individual extensions - there are many ways that extension developers used to store their data and pref. The original way should save in prefs.js or their own file RDF in the profile folder. While Firefox has been developed more, developers started using their own files in the profile folder. And because Mozilla has started using sqlite database files in Firefox 3.0, Mozilla extended their own use of sqlite, as have extension developers.
  Elegant uses the file stylish.sqlite to store 'styles', but something in the back of my mine tells me that 'the index' maybe not in this file with the data. But then again, I can be confusing myself a question I had with GreaseMonkey awhile back where I copied the gm_scripts folder in a new profile and with already installed GreaseMonkey but with no script. These GM scripts worked, but I could not see them or modify them - they do not appear in the user GM extension interface window in Firefox.

• Error of Facebook, what can I do? Resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-Jetpack/qclean-remove-Facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  Facebook maintains the gel, a problem caused by this script resource://jid0-wpch2liwmumjc8av1vwejwvgjbi-at-jetpack/qclean-remove-facebook-ads-suggested-pages-and-posts/data/qclean.js:53

  I tried many solutions suggested, nothing works. Please advse. Thank you.

  Ed

  Hello ed, this error is caused by the qclean addon that you have installed. Please disable or delete or report the problem to the author of the extension...

  Disable or remove modules

• I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not download apps

  I am not able to download apps for my iPhone on the App Store. He just 'waiting '. But never starts the download. I tried with wifi and mobile data. The two are not downloading the applications Can u find out what's wrong? I use iPhone 5s

  I had the same problem. At the same time hold the screen lock button and the home button until your iPhone restarts. That solved the problem for me.

• How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  How to eject my iphone, or player card on my macbook air?  I don't want to disconnect and lose data...

  You won't lose data when you remove an iPhone, unless you're in the middle of the backup or synchronization of the device.

  If you see no activity in iTunes/Photos/etc... Then, it is safe to unplug.

  With a card reader (SD card?) you do drag the desktop icon to the trash. It turns into an arrow when you drag an icon ejector.

  Similarly, you can click Finder on the dock, then locate the reader on the left column and click on the "arrow" to the right of the device to eject it.