Control action CommandButton execution while the Page Refresh

Similar Questions

• Stop the execution of the method while the page is loading

  Hello

  I'm new to the development of web service client. I created a client using the full declarative approach, namely the average webservice dataControl. The web service, I created required 2 parameters to pass and returns a list. So I dragged and dropped the two parameters such as form fields and list in table form in the same page, as well as the execute method button.

  But the problem is when I loaded the page, get the webservice call/called and passes the parameters as null. And so I get a msg of validation. Can someone let me know what needs to be done when to avoid the execution of the method (webservice call) while the page is loading.

  Kind regards

  Marie Antoinette

  Did you check that?

  https://blogs.Oracle.com/Shay/entry/delay_method_execution_when_us

• The connection to complaints.donotcall.gov while the page is loading. "All other pages load fine. Loads of everything perfectly on I / E 8

  When you connect to the 'do not call site' to complain I get the following message "the connection to the complaints.donotcall.gov was interrupted while the page is loading." All other pages load fine. Loads of everything perfectly on I / E 8.
  I started Firefox in safe mode and got the same results.
  Disabled the firewall and virus programs, no help. I have 2 new computers about 2 years, both have the same problem with version 12.0

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#Cure please!"

  When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#".
  Cure please!

  Do you find it with other browsers?

  If not, then try asking using Firefox for a.

  That you get with other sites with Firefox?

• I'm unable to access my hotmail account, a pop up comes up and says connection to the server was reset while the page is loading?

  I know that it is a problem of microsoft as my computer has been checked by a technician and he said it was a microsoft problem!
  Other messages:

  connection to the server was reset while the page was loading, is the answer in the pop-up window when I try to access my hotmail account, I certainly know it's a problem of microsoft as my computer has been checked by a technician and that s what he says, sincerely j roth

  THEN A POP UP SCREEN COMES up on TOP of SCREEN AND SAYS CONNECTION has BEEN RESET, the CONNECTION TO THE SERVER WAS RESET WHILE THE PAGE WAS LOADING.this proved to be a problem in microsoft and certainly isn't my computer, so I need it works again!

  Hi JeannieRoth,

  Thanks for posting your question in the Microsoft answers Forum. For any questions about Hotmail, please visit the Forum of Hotmail.

• during execution of the page, I got the below error

  Hi gurus,
  
  During execution of the page, I got the below error.
  
  Error (14.8): wnsgs.oracle.apps.pa.projectinfo.server.NewManagerCustomTableEOImpl of the class should be declared abstract. not setLastUpdateLogin (oracle.jbo.domain.Number) method defined in the class oracle.apps.fnd.framework.server.OAEntityImpl
  
  
  Please help me its very urgent
  
  Thank you
  Sandrine

  Hi Liza,

  Please check your columns WHO that u added correctly or not in your OT If not added you please define the setLastUpdateLogin() method in the java file NewManagerCustomTableEOImpl.

  Thank you
  Deb

• Dynamic action to show skillbuilders popup doesn't work when the page refreshes

  Hello!.
  I have a relationship with a column of link:
  
  "" < a href = "f?... class = show_popup '...
  
  I have a dynamic action defined like this:
  
  
  Event: click.
  type: jquery selector
  selector: a.show_popup
  no condition.
  
  Action: skillbuildersmodalpage 2.0.0
  URL: attribute of the triggering element.
  
  It works fine, but after that the popup is shown and closed, the link does not work until the page is completely refreshed again.
  
  After the closure of the pop-up window, I only update the report with $a_report (in another dynamic action on the 'auto skillbuolders close' event), I don't want to send the entire page...
  the partial update works fine too, but not the link, it works again by refreshing or submit that all page
  
  any idea?
  
  Published by: Andres Vilallave on 28-may-2013 16:22

  you define the scope of the dynamic event?

• complete execution while the background thread runs

  After the passage of TestStand 4.1 in 2012, I see an interesting problem.

  I start a MainSequence via the SinglePass execution entry point using the parallel model. In ProcessSetup (in the execution of N), I start a background thread that performs certain tasks for viewing. Then the model passes by "Initialize TestSockets" and starts my MainSequence (in year N + 1).

  While the MainSequence is running, run N hangs in ParallelModel.seq > Single Pass, step "Wait for TestSockets", as it should. Usually, when the MainSequence is over, puts an end to execution and execution N goes to the next step "Check to terminate" and some time later, it passes through ProcessCleanup - where I'd send my background thread notification to stop.

  It works as long as I do not start the background thread. But when this thread is running, the execution of N + 1 never leaves the MainSequence. I arrive at a breakpoint at the end of MainSequence, ahead, and then all executions are happily showing a green light and continue to operate on. So running N never leaves "Waiting for TestSockets" and never reaches ProcessCleanup, so my son does not receive the signal of endpoint etc.

  But I distinctly remember that it worked in TestStand 4.1, and anyway, I don't understand this. Why, a background, started in the execution of N, thread prevents the execution of N + 1 to terminate?

  Concerning

  Peter

  "When execution starts a sequence in a new thread (not waiting for the thread to finish at the end of the sequence), should take care at the end of his MainSequence wire in order to put an end to herself in order for execution to terminate?"

  What do you mean by terminate? Process templates are not normally completed executions. Do you mean, "all discussions in an execution must complete before the end of the execution?"? If so, then the answer is Yes.

  I'm not completely your explanations above. I'm not sure what you mean by signs, but I think you're misunderstanding what terminate means in TestStand. Termination occurs only when a user explicitly requests a run to finish (e.g. finish all) or your sequence has an action to complete or by program initiates a terminate. Without endpoint explicit that past, executions normally end when all threads are finished executing. If you are spawning runs and new threads, you must come up with a mechanism to let them know when they have to leave. I do NOT recommend relying on or using termination for this. Termination is as abandoned (but with a cleaning), it is not intended to be something that happens in the normal flow of execution. There are several ways to tell your worker when all discussions. Perhaps this posting you are referring to is a way. You can also use a notification teststand step, or a Boolean value in reference parameter.

  Hope this helps to clear things up,

  -Doug

• Action and ActionListener cause the page reload?

  I have a long page where the user must scroll down to go through all the components of the page. on the page, I have a button when the user presses it the value of an text box will be added to the table of the ADF , where the user can see in the page.

  Problem is when the press user, the button of the page reloads. It's when the button is pressed, the control passes the top of the page. I tried to use the Action and ActionListener (each one separately) and again, I get the same result.

  Any ideas to prohibit control to the beginning of the page, because it is not easy to use.

  I use Jdeveloper 11.1.2.3 with the technology of the ADF and JSF pages

  Hello

  tried to set partialSubmit of the button to true or use toolbarButton (including the default value for partialSubmit = true)?

• Typekit Web fonts change size temporarily when the Page refreshes

  Hello

  I use Typekit, Source without Pro fonts on my site.  The police appear in good condition, but when any page refresh or if you go to a new page on the site, all instances of the police appear more than a second and then return to normal.  Would you have any idea why this happens?

  Here's the site (excuse the pixelated image):

  Interiors of MK

  Thank you!

  You can try this help page: Adobe Typekit Help: Flash control without text style (... )

  I'm guessing that you see a Flash of unstyled text, not just a change of size. I could be wrong, but it's worth the trip.

• Sorry, something went wrong. You must refresh the page - refresh page

  I worked through my portfolio of Prosite Adobe portfolio. It seemed to work fine at first.

  However, in the last few days I started to see this alert at the top of the page in edit mode. Refresh does not seem to solve the problem and alert reappears.

  

  I think it has something to do with Typekit. It seems that the Portfolio does not accept any of my changes when you use Typeset fonts.

  I work with a subscription Cloud full creative and Safari 9.0.3.

  I appreciate any guidance.

  Thank you

  Mike

  Hello! Sorry to hear about this issue - certainly submit a ticket here: help.myportfolio.com and we can take a deeper look.

• Default method of workflow activity is not called when the Page refreshes

  Basically, try to call a script function java front page of fragments of the charges.

  INSTALLATION PROGRAM:

  Jdev 12 c

  TF defined with a default activity that invokes a page fragment.

  The activity of default method calls a method to support bean which inturn calls the method init java script before the fragment on the page doesn't load.

  This TF is in a container jsf page.

  During the loading of the page containing the first activity of the method is called and js function triggers and then fragments of charges which is the desired behavior.

  PROBLEM:

  When I refresh the page by pressing F5 or by running the page again on the same window of the browser activity method default IS NOT gets called which inturn will not trigger the js call.

  But when I run the same page again in a different window it works and then subsequent updates or page load activity IS NOT of default method is called.

  If it is not provided? The default activity is called when the workflow is updated.

  Check outhttp://www.oracle.com/technetwork/developer-tools/adf/learnmore/108-triggerpopupinregion-1994836.pdf which should work also in your car.

  Timo

• Execute code on the UI while the page is loading component

  Hi all

  I'm usng Jdeveloper 11 GR 2.

  I want to call code snippet below to change the properties of the text entry fields and set them to allow the loading of a page-

  FacesContext facesContext = FacesContext.getCurrentInstance ();

  UIViewRoot root = facesContext.getViewRoot ();

  RichPanelFormLayout formClass = (RichPanelFormLayout) root.findComponent ("id");

  List < UIComponent > uiComponentList = formClass.getChildren ();

  for (UIComponent uiComponent: uiComponentList) {}

  If (uiComponent instanceof RichInputText) {}

  ((RichInputText) uiComponent) .setDisabled (true);

  ((RichInputText) uiComponent) .setColumns (100);

  Boolean flag = ((RichInputText) uiComponent) .isChanged ();

  System.out.println ("flag-" + flag);

  }

  At present, the code snippets works well on component of command action but I want the same run when loading the home page without the use of any part of the order.

  Please advise on how to do this.

  Best regards

  Ankit Gupta

  Check out https://blogs.oracle.com/adf/entry/an_epic_question_how_to

  Solution 2 (call to actions) are deprecated in 12 c, so I wouldn't recommend using it.

  Timo

• Get rid of the success_msg when the page refreshes

  Hello
  
  By default, success for the Apex (4.0.2) process messages are embedded in the URL like this:
  

  http://server/apex/f?p=1:1:752495074277700::NO:::&success_msg=All%20changes%20saved

  For this reason, if the user refreshes the page the message obviously shows once again. Users say it's confusing because it looks like to other changes have been saved.
  
  Their hope is that, if they refresh the page, the success message should not appear.
  
  Is it possible to change this behavior? I think not, but you never know... I hope that makes sense!
  
  Thank you
  Luis

  Best Solution this time :)

• Create a component of demand, say F_SHOW_MESSAGE
  
• Create application processes - "Set F_SHOW_MESSAGE"

   Process Point: On Submit: After Page Submission - After Computations and Validations
  Type: PL/SQL Block
  Process Text: :F_SHOW_MESSAGE := 'YES';
  

• Create another process request - "show or hide the Message.

  Process Point: On Load: Before Header (page template header)
  Type: PL/SQL Block
  Process Text:
       IF :F_SHOW_MESSAGE = 'YES' THEN
        :F_SHOW_MESSAGE := 'NO';
       ELSE
        APEX_APPLICATION.G_PRINT_SUCCESS_MESSAGE := NULL;
       END IF;
  

  This should solve your problem :D

  Kind regards
  Hari