Control audio RED titles to import

Similar Questions

• Buttons volume control audio keyboard in HP (HP ENVY 23-d239c TouchSmart All-- One desktop PC)

  When you use the update of Windows 8 App to install the update "Vidéo" - music and video. It disables keyboard HP audio control keys. How can I prevent this from happening, or is it possible to restore the functions of the buttons without doing a system restore, what I did to fix it this time?

  Thanks for any help

  Hello swedebc,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your controls audio keyboard are disabled and you are looking to reactivate without performing all of the computer. You should be able to restore by simply reinstalling your Audio drivers. You can do this by downloading and installing the IDT High Definition Audio Driver for your computer.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

• I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions

  I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions?

  danobtwo wrote:

  See the video, I hear the audio until it is imported.  any suggestions?

  Do you mean during the import process?

  There is no FCP X parameter to change the way THAT DV is imported.

  I used to hear the audio import with Sony cameras but Canon may be a different story.

  If the imported files are OK, then it can be a thing of Protocol firewire Canon.

  Al

• I used to be able to right-click on a photo and bring up a window allowing me to resize, brighten, control eyes red etc, but he disappeared and I can not find. Can you help me?

  I used to be able to right-click on a photo and bring up a window allowing me to resize, brighten, control eyes red etc, but he disappeared and I can not find. Can anyone help please?               Don Fitzpatrick_795

  Thanks for trying to help me and I found already this site but was'nt be able to make it work for me, probably because I'm 82 years old and am certainly not a guru when it comes to computers, but if you have other thoughts on the subject, they will be welcome as long as they are simple, if you get what I mean.

  Sincerely, Don Fitzpatrick_795

  =============================================
  Since we have no way to know what you
  already tried or what the program that has been
  you were happy with... this question is difficult to
  fix.

  Question... When you view your photos now
  .. are you using Windows Live Photo Gallery?

  I'm guessing it was Windows Photo
  Gallery?

  Perhaps the two programs are still available...

  I wonder if you could go to... Start Orb / All
  Programs / Windows Photo Gallery... and
  the launch of the old version?

• Movie Maker no video or audio in MPEG clip imported after you disable filters

  There is no video or audio in the clip imported (to import videos) and I tried to disable the four filters in the Compatibility tab (Cyberlink Audio, AVI decompressor, Cyberlink MPEG-2, Cyberlink MPEG-1) in the tools. The parameter default NTSC in the Advanced tab is selected and has not changed. When I tried to connect the camcorder directly to the computer and Movie Maker "import from digital video camera", the message says that a compatible device is not detected (Sony handycam). Any other suggestions?

  There is no video or audio in the clip imported (to import videos) and I tried to disable the four filters in the Compatibility tab (Cyberlink Audio, AVI decompressor, Cyberlink MPEG-2, Cyberlink MPEG-1) in the tools. The parameter default NTSC in the Advanced tab is selected and has not changed. When I tried to connect the camcorder directly to the computer and Movie Maker "import from digital video camera", the message says that a compatible device is not detected (Sony handycam). Any other suggestions?

  ====================================
  Perhaps the solution would be to convert the MPEG to
  the format WMA before you import into Movie Maker.

  Perhaps the following would offer a few ideas:

  Windows Vista-
  Import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Windows Vista-
  Import video from a video camera high definition (HDV)
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-high-definition-video-HDV-camera

  WIndows Vista-
  Importing video high definition (HDV): frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/importing-high-definition-video-HDV-frequently-asked-questions

  Windows Vista-
  Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  Windows Vista-
  Can what types of connections and digital video cameras be used to import
  video?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-types-of-digital-video-cameras-and-connections-can-I-use-to-import-video

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Add a red label on import?

  I want red images label imported as part of the import process.  It is easy enough for the time to label them in the most recent 'import' collection but nevertheless so they seem willing labeled would be useful in my work flow.  Any ideas?

  Create a preset metadata with 'red' in the field 'Label' (information) and apply this preset metadata during import.

  Gossweiler beat

  Switzerland

• Video audio synchronization on the import problem

  When I import images and display in the wndow Source pane, the imported video and audio is out of sync. Even if I mark my outings and insert it in my project. If this isn't just the reading of the source. Whay is happening and howw can solve this problem? The film plays well in its native form, but after you import to use in my project the sand audio video is out of sync. Very frustrating, please help

  Post edited by: Kevin Monahan

  Reason: your title is too long and not searchable

  Tutorial on Vimeo https://forums.adobe.com/thread/1567965 codec

  Exactly what is on the INSIDE of the video you are editing?

  Information about the codec & Format, with 2 links inside for you to read http://forums.adobe.com/thread/1270588

  A report with details of codec your file, use the following programs... A screen capture works well for people to SHOW what you do

  https://forums.adobe.com/thread/1070933 for instructions of screenshot

  Free programs to get information on PC/Mac http://mediaarea.net/en/MediaInfo/Download files

  Your video using a VARIABLE rate or a rate constant?

• problems to capture the audio layer when you import the m2ts files

  Hi all, I'm new on the side of the entire video editing and so would be grateful for the help.

  I just bought a camcorder Canon HF200 HD, and a Sony Vaio notebook that came with Premiere Elements 7.0 preinstalled.

  Last month I've been shooting sequences and down just to try to change everything and set up a DVD.

  The problem I have right now (and I've just started using the program, so everything is new for me) is that while I seem to be able to import the m2ts file format in which my camera records, only the video is imported by first - no audio (it reads the file ok, no errors appear, but when I go to review images there is video but no sound).

  I can play all my videos in Windows Media Player very well, both video and audio.  So it seems that my machine is able to read the files correctly in this program.  However, it seems that the audio drop out when I import the file in first.  The program was pre-installed on my computer and when I have a look at the audio settings, it doesn't seem to be a possibility to change the settings to something different.

  So far, I've spent a long time googling and trying to find a solution, but without any joy immediately.

  Enjoy the anyone can offer any assistance.  Is it just a simple setting I need to change?  Or I have to somehow convert the files in a different format before Elements 7.0 can read?

  Thank you.

  Jeff

  the machine I have appear to be consistent with the specifications required by PE7 (and given that it came with pre-installed PE7 which should be the case).

  There are two things to consider:

  1.) edition of most of the images, especially material to SD

  2.) editing AVCHD, currently the most demanding of all popular video formats to edit. That's what you have.

  Now when you launch the pre, you get a splash screen. There you can open new create a new project, open an existing project that has been recently opened, or open a project by browsing to it. We can also leave.

  In your case, you go again and when the dialog box opens, choose the preset for AVCHD w / DD 5.1 SS Audio.

  Also note, that in the Edit Mode, there are two Modes of display (access via two icons to the left of the lower panel), view timeline and sceneline view. For DD 5.1 SS Audio Clips, you will find Timeline View Mode to be the best. Now, you can switch back, but the timeline view Mode will give you infinite control. It is estimated that change the most programs use, and most publishers use.

  Good luck

  Hunt

  PS - I highly recommend Steve Grisetti book, The Muvipix.com Guide to Adobe Premiere Elements 7

• Audio popping up on imported Clips

  Hello

  I am very new to Final Cut Pro and 2 major problems:

  First of all, I hear audio pop regular, strong throughout my clips.

  Second, my exported files are far too great, to more than 9 GB for a 9 minute clip.

  My company is video teaching of music online. I used to edit using an older version of Premiere Pro, but passed to Final Cut, because I heard it was easier to sync for multicamera editing clips.

  I recently completed the shooting of months of video tutorial for a new online course, using a configuration of 2 camera, with all the noise (LAV mic, guitar and backing track signal) enter one of the two cameras Sony HDR PJ-620 via a Mackie mixer, in order to save the record audio separately.

  I am a professional musician and know a fair amount to get a decent sound in the studio, so my raw files from video MTS sound of intact, with good balance and EQ level. I managed to tweak everything as I wanted until I started filming.

  However, when I import files into Final Cut to edit, I experience loud pop during playback. It is extremely sensitive and occurs every 3 or 4 seconds.

  At first, I assumed that the problem came from my system, hard to follow. I use proxy media during editing. However, persistent organic pollutants are still on the video after export.

  My sound levels in the project is without cutting. They peak at about-3 db. I did no equalizer or sound settings setting and there is no audio compression or effects, just the audio crude comes from the MTS file.

  Secondly, as I mentioned above, when I export my project via the master file by default settings, the file size is huge. It seems incredible, but it weighs about 9 GB for a 9 minute video.

  My videos are meant to be online streaming via a delivery service of content such as Amazon S3 or Vimeo Pro (not YouTube). I need them to be of good quality, but much smaller than they are currently.

  Can you recommend a decent framework of export? Should I have converted the MTS to Mov files before import into my project? I used to do this with Premiere Pro, but he said I wouldn't need to in Final Cut.

  I'm under El Capitan 10.11.5. My version of Final Cut is 10.2.3.

  I use a mid-2014, retina 15 "Macbook Pro with a processor Intel Core i7 2.8 GHz, 16 GB of memory. My graphics card is a NVIDIA GeForce GT 750M 2048.

  Any advice would be greatly appreciated.

  Thanks in advance.

  IF you work with the camera .mts files, the media was not imported correctly. If you import from the camera through the window to import the files get reupholstered for QuickTime and tracks worked for production. . MTS is a horrible format and should not be used in production. You might try to optimize media. This creates files of proti which are very large and require fast disks, but are of very high quality.

  Export a master file and set the H.264 format.

• M30 - buttons Mode Front and control Audio and video do not work

  Hello

  Front Mode and Audio/video control buttons do not work

  Any ideas?

  Thank you

  Hello

  As far as I know the Toshiba utility controls is responsible for the use of the key.
  Have you tried to install Toshiba controls?
  See the page of the Toshiba driver for this driver.

  Good bye

• Without my audio clip fade handles imported

  Import a clip of music for my FCPX project, but there are some on the audio clip fade handles. How can I melted in released. Thank you. Jun

  PPost a screenshot of what you see. Is clip appearances configured to display waveforms?

• Audio randomly abandonment of imported files

  I use Adobe Media Encoder version 9.2.0.26 on an iMac of 2015 running El Capitan with 32 GB of memory and a processor Intel Core i7 to 4 GHz.

  I often import more long music shows (how long and more than an hour). I never had this problem until recently, but to import the concerts, the audio is randomly drop points. It is not a question of creation, because the audio is de-energized when you view the file imported into Quicktime as well.

  

  You can see in the picture above that all five channels of the 5.1 surround stop just halfway through the concert. There is no consistency to the time where each concert is de-energized. The above video has audio abandonment to less than 32 minutes. Other concerts have abandoned 30 minutes, 53 minutes, 15 minutes and 24 minutes. This problem does not occur with shorter files.

  Here is the coder of the journal information:

  -Source file: /Volumes/CAM_MEM/AVCHD/BDMV/STREAM/00008.MTS

  -Output file: /Volumes/Goliath/PremiereFiles/Concerts/SP161003_OldLineStatesmen.mov

  -Preset used: Custom

  -Video: 1920 x 1080 (1.0), 29.97 FPS, sole, quality 90, H.264, 01:05:46:00

  -Audio: Uncompressed, 48000 Hz, 5.1 (L, C, R, Ls, Rs, LFE), 16-bit

  -Bitrate: Target 10 Mbps, 10 Mbps Max

  -Encoding Time: 00:54:55

  10/05/2016 19:54:30: file encoded with success

  Someone at - it no indication as to why this happens and how to fix it?

  Thanks in advance!

  Chris

  So good news... Looking at the location of the media Cache, I noticed the "Clean" button Pressed this button, re-imported files and it seems that they all worked.

  That being said, I do not know why the records covering media and media Cache files aren't there.

  In addition, when the issue started occurring, I have day SOUL and first, but thanks for the suggestion.

  Chris

• No audio with m2t-clips imported in first pro cc 2015.4

  Hello!

  This problem is with premiere pro cc 2015.4 output. When you import clips m2t project, there is no audio track. I also tried to ingest the files and ingested turned out with no audio as well. Even the audio information lacked after ingestion.

  for example, VLC media player and grass valley edius performance audio clips without any problem. I also tried the option "Edit in adobe audition", and the audio transferred to listening was completely silent/vacuum wave, no sound at all.

  These clips have worked perfectly with the previous premiere pro version. What I come to GV Edius again to face the edition?

  This problem started with the 2015.4 update. There will be a solution for this? At present, the new premiere pro is completely useless for me. I can't use footage captured with my Sony Z5E-camera at all.

  Please do not ask me how to transfer videos to my project etc other nonsense questions. I have been editing videos for more than 15 years, I know what I'm doing.

  Cheers, Mikko Tirkkonen

  Producer of the AV, Finland

  It could be your preference files.  I had the same problem and complete these steps.

  Mac: \Users\Library\Application Support\Adobe

  Windows: C:\Users\\AppData\Roaming\Adobe

  Beware, if you follow these steps, all your preferences, workspaces, exclusives be lost.  You will return to default values.  Proceed at your own risk.

  1. close all applications.

  2 rename the Premiere Pro (e.g. first Pro_OLD) folder.

  Forcing Premiere Pro to re-create the default preferences.

  3. restart Premiere Pro and check.

  If the above does not work, delete the newly created folder of Premiere Pro and rename the "OLD" its original name folder.  At least you'll be no worse turned off.

  There is a most brutal stage that you wish to consider, which erases the entire Adobe folder and not the first Pro folder it contains.  I mention it here, but advises against procedure unless you are really comfortable with working within Windows.  Same warning, proceed at your own risk.

  You'll need to start your PC in safe mode, while none of the Adobe services are running.

  Navigate to the location above, but remain a plu top folder (for Windows: C\Users\\AppData\Roaming) and rename the Adobe Adobe_OLD folder.

  Restart your PC normally

  Again, you can always return by from your PC in safe mode, delete the newly created folder from Adobe and restore his former.

• Error files RED / offline, cannot import after update

  Hi all

  I've just updated to Version 13.7.1.6. and all of a sudden all R3D files in my project are offline

  and cannot be reconnected or replaced (files are grey)

  When I try to import again this salad error appears:

  

  all this experience right now?

  Thank you
  M.

  This bug is fixed in the update after effects CC 2015 (13.7.2): http://adobe.ly/1WaV0pP

  This only bug fixes Update corrections occurred after effects CC 2015 (13.7.1) on Mac OS x files: RED (.r3d) can still be imported and are not reported as missing in existing projects.

  This update is only for Mac OS X and is not available for Windows, because the bug with the RED files does not occur under Windows. The most recent update for After Effects on Windows is after effects CC 2015 (13.7.1).

• Adobe Media Encoder is not looking for additional audio top titles when the video clips to transcoding.

  I have 4 K images with 4 mono audio tracks recorded.  Two of the tracks are dead audio, both are mic on the camera.  I need this audio, synchronize externally recorded in PluralEyes tracks, but that is besides the point.

  When I use SOUL 6.0.2.81 (part of the CS6) to transcode my 4K MOV files in images of 1080 can be used for offline editing, it seems that pick up the first two tracks (dead) and ignore the titles 3 and 4, which contain audio live.

  So far the only solution I found is to put each clip in the first separately.  First recognizes all 4 tracks.  I remove the first two, then export to first to 1080.  It's waaay to strong workforce given the number of shots.

  Any ideas why SOUL would not pick up the two audio tracks?

  Under settings QuickTime Audio, you can try the 'Uncompressed' codec that is multi-channel options?  Then, please use option 'Channel 4 '.  This should export all the four channels.