Control correctly 3 heartbeats at 3 meters of material using PCI-6601

Similar Questions

• I can't access my cloud applications creative adobe correctly for the plan of photography. I used to have the full plan and move in terms of photography, and now I can't access my apps under the creative cloud. He said to uninstall and reinstall I tried t

  I can't access my cloud applications creative adobe correctly for the plan of photography. I used to have the full plan and move in terms of photography, and now I can't access my apps under the creative cloud. He said to uninstall and reinstall I have tried to do without success and still get the same error.

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• can I scroll the pages via gesture control. At the present time to scroll, I use the pointer over the edge Strip!

  I would like to be able to scroll using the gesture control. I think I've been using sound, but it now seems to be not not available.
  Scrolling by pointing at the helm of the edge is a pain!

  Gestures are a feature of your operating system. Check your operating system settings.

  TB - 38, 3 Win10-PC

• I want to control the speed and direction of a motor continuous using labview with pwm

  I want to control the speed and direction of a motor (essentially a toy motor) continuous generating a PWM signal in labview. I'm using L293d motor and exit DAQ-9472. Can I do this without the help of any microcontroller but only a simple labview code and the DAQ 9472 output

  There are many examples on how to generate a PWM on one in the buffer, or on a counter, but that does not support this card.  A 8 a cDAQ chassis also a BNC connector that can be used as a counter as well.  These examples can be found in help > example Finder in LabVIEW.

  Also be aware of your current limiting.  This card can drive a decent amount of current, but it has its limits.  You'll want to put an inline meter to see what is current and see how far you get to it.

• Is it possible particularly handy/quick to disable controls (multi-column listbox) when executing the output material associated?

  Please excuse me if the title of the post is not clear, I would try to explain what I need to do here.

  In the application, I am currently in train, UI use multi column listboxes in several places where a set value (one line) is selected, and based on the rowset / selected, relay/material are enabled to match a given configuration (which is then verified with your comments).  The problem is, I can easily rush into the user interface and make program stuttering and choke...

  I just put my finger down in one of the rows in the listbox control and drag my finger up and down the screen as a 5 year old child see a touch screen for the first time - he tries to each entry cache/buffer.  After I stop being 5 years old again I sit and listen to the click click of the relay for a bit.  One of these list boxes, I've already implemented enable and disable to pieces of code to implement the right before the digital output and solve the controls right after that feedback has been verified.  It was kind of a pain to do, so I wonder if there is an easier way to do it.

  Any idea or suggestion appreciated!

  Thank you

  -Pat

  PS - i As training until this weekend so I will probably not be quick to answer, but still thx for any info

  Use a "Mouse Up" event instead of an event of "change the value.

• spritesheet 2d stage3d/starling control, how? or conversion to apply 2d to use stage3d

  LS,

  Look in my environment stage3d porting 2d game.

  The ol' ' approach works fine until a lot of things begins to appear on the screen at the same time.

  At this point, I think it is the displaylist that starts to block them or seriously to attract resources.

  So... stage3d then.

  Question:

  I can't find "Advanced" sprite control methods

  In my old im App using MC "gotoandplay s and use to direct them to the current position of the market and/or a deathsequence and others.

  In Starling I can spritesheet em, then juggle em, em of start and stop 'em. But not specifically target any image that I want it to be.

  shaks!

  If I could strip 'em apart to void sequence spritesheets i.e: walking, running, taking, die, throw.

  then add and remove/replace em from the scene as soon as a change occurs.

  What is the way to do it?

  IM, fearing that this will cancel the stage3d speed improvements.

  All this beeing seriously disconcerting if it leads to nothing, I seriously hope someone can enlighten me on this.

  Who is extreme

  Mac

  For all with the same question.

  I think that it will be explained here

  http://www.Adobe.com/devnet/flashplayer/articles/creating-whack-with-Starling.html

• Controls the size of the popup window when you use the target

  With the help of the anchor tag and attribute target (< a target = "_blank"... >), how one control the size of the new window? Or is that not possible? Thank you!

  Use javascript. If you want to put in the tag, then you can do it this way:

  assuming that your page is index.cfm, so:

  test link

  OR use the other tags such as

  test link

  If not yet know window.open, go to this link for reference: http://msdn2.microsoft.com/en-us/library/ms536651.aspx

• Correct a way to clone a new database using EXP/IMP?

  Hello
  
  What is the right way to import into a new database?
  
  I have an export to an existing base (say 8i) and I need this clone under a new name (lets assume on the same machine).
  
  1 export the existing database
  2. create the necessary folders / init.ora / run the db creation script / run catalog & catproc / create TS
  3 import like: file system/password@newdb = full imp = xx is ignore = y
  
  Set to 'ignore' or not? Anyway what I will meet some errors with sys / tables system; such as:
  
  IMP-00019: line rejected due to the ORACLE 1 error
  IMP-00003: ORACLE error 1
  ORA-00001: unique constraint (SYSTEM. REPCAT$ _OBJECT_TYPE_PK) violated
  Column 1 - 1005
  Column 2 SYNCHRONOUS EDITABLE TABLE
  Column 3 02
  Column 4
  IMP-00019: line rejected due to the ORACLE 1 error
  IMP-00003: ORACLE error 1
  ORA-00001: unique constraint (SYSTEM. REPCAT$ _OBJECT_TYPE_PK) violated
  Column 1 - 1004
  UPDATE TABLE ASYNCHRONOUS column 2
  Column 3 00
  Column 4
  
  (BTW... It is a 10 DB g I imported), but I suppose that errors with sys / system would likely happen on older databases as well (for sys or system tables).
  
  OR is it better to create new DB and import individual patterns?
  
  Can someone shed some light on the correct way to ensure that the new clone is 100% fit?
  
  Thank you.
  
  Published by: user4874781 on January 29, 2009 18:20

  Yes it is possible... this... once u create your new instance SUN2... Connect as sys and see what that all users, he created... system, sysman, dbnsm or all the value by defect... once u get that... just exclude these schema... .and for imp this

  IMP System/pass leader is full.dmp log log.log fromuser = is user1, user2, user3,... touser = user1, user2, user3...

• How to run two 'County of buffered edge' using two different counters at the same time?

  Hello

  I try to use two counters at the same time count the TTL pulses for a fixed period (lets say 10 ms). I have the card PCI-6251 and PCI-6601. I am currently using PCI 6601 as counters and running a self updated the ' stamped edge County - reset.VI. Here, I have attached my VI.

  Now, during the execution of this VI, I get an error saying "error-200251 occurred at Task.vi:4 DAQmx Start" and the possible reasons are, "measures: no USB or DMA channels in loose ends are available.»

  Either stop other tasks which might be using these resources or are considering changing your mechanism for transfer of data to the interruptions if supported.

  Device: Dev2

  Task name: _unnamedTask<80>. »

  What I realized is I'm trying to use two buffers for two meters with ten samples each and this is probably not allowed. I don't know how to solve this out and bad looking for your suggestions.

  Thanks in advance.

  Hi all

  I found a solution too. This is the VI updated the "County of edge stamped" which can simultaneously run two entries-meter using a single source of door and it also uses the DMA and interrupts to save two pads.

  Have a nice weekend.

• How to fix a database?

  Good day people,

  Please, I'll be happy to get explanations of lay - man on how to do the patch when upgrading to a newer version of the oracle database.

  For example, from release 11,201 or 10.201 to 10,203 11.203.

  Thank you.

  Salvation;

  All the patch Readme part, so you have check patch me part read and follow the steps. By the way specific version notes are already available at metalink such as:

  Complete list of control for the modernisation of 11 GR 1 material using DBUA [556477.1 ID]
  Complete the checklist for manual updates to GR 11, 1 material [ID 429825.1]

  Minimizing downtime during the upgrade of Production [478308.1 ID]
  Note to master for the upgrades of Oracle database and migration [ID 1152016.1]
  Different methods of upgrade for the upgrade of your database [ID 419550.1]

  PS: Please don't forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• using the remote control of the DVD does not select the correct buttons?

  Hey Ya'll,

  Project is almost complete, but I ran into one, which I think is a very simple problem...

  On my main menu, I have a total of 5 buttons on 2 rows.

  Line 1 to 2 buttons and Row 2 has 3 buttons.

  The links are correct, because they work fine in preview mode, using the mouse, but also view the version on the pc using Cyberlink DVD Viewer, once again, using the mouse to select the button.

  The problem is when you use the remote control, either on the copy engraved in the DVD player, or in preview mode, if I use the directional buttons of remote controls, that he does not want to go to the buttons I suppose it must

  (Top row left to right, then down row from left to right)

  On each of the properties of the buttons Panel, I chose the right (I guess) option number (just below name) for each button... IE top left set the right value top of page 1, 2, bottom left 3, the middle value 4 downstairs and down to the right the value 5.

  Type is set to Normal, the button name and Synch text is checked (although the No button is real, each is just a Word text, in photoshop, when I did originally the menu..)

  Also the low middle button never gets selected with the remote control of the DVD... Preview, using the buttons on the remote control, he finally gets selected, but it takes a bit of comes and goes, and the highlighted button is rarely what you would expect, since direction button your pushing.

  #1 button (top left) is set to the default button, which I want, but do not know how I set that, unless it's because it was the first button, I myself made/converted to the button)

  Here, any help would be greatly appreciated... that should finish this project!

  CB

  Cowboy Bob,

  No, what you did with the binder is actually linking these buttons to the assets.

  It shows a Menu with several buttons, icon manually road buttons depressed. Once you choose manually the buttons of road, they can change exactly what will make the remote control.

  

  As said, when you create a Menu, buttons start at # 1 and progress upward. Each Layer Set button plus up in the Layers Palette. This is the routing of the buttons Auto gets its information and it usually works. However, if you move the buttons around, removes some, etc., the en can get confused, manually their routing is the best way to go.

  Good luck and we hope this helps,

  Hunt

• No sound when using Firefox Hello despite Firefox playing audio files in Web sites correctly...

  I tried to use Firefox Hello to a conversation with my mother, who also uses Firefox. She could not get any sound, just the video image, despite the volume being defined properly controls. The microphone settings are correct, and in fact, I tried to call using two different computers but with the same result every time. I used successfully for a conversation with someone different. We all have two Windows 7 Professional v36.0 Firefox

  My mother is able to listen to the audio tracks in websites using Firefox but I don't hear a thing in Hello, what makes all this seems quite strange.

  Happy to say everything works now. Nothing has changed, so why it wasn't working the other day? One of life little mysteries but work he does, which is all that matters.

• How to set up intelligent control on a multimbral instrument

  Hello

  I'm with Kontakt multitimbral instrument inside Logic Pro X.

  I'm launching of the smart controls on all the midi channels to control certain parameters such as Attack, Release etc...

  The Smart Control pane only controls the instrument on channel 1.

  Any specific way to have intelligent controls on other instruments on other Midi channels?

  Best regards

  I had no problems with that.  You configure the Smart controls correctly?

  http://help.Apple.com/LogicPro/Mac/10.2.1/#/lgcp7e59f24b

• Need help with my Toshiba remote control and receiver for Qosmio G30 161

  Hi all

  I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

  I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

  Also to confirm that I'm under addition of Windows XP MCE.

  Anthony Worlock

  Hello

  This remote will work, if you use it without any special drivers and special software, only in the Media Center.

  But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

  Please try this tool and check if it works.

  By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

  Welcome them

• Cannot control ARD 3.8.5 customers using 3.8 ARD on 10.11

  Recently upgraded my station and a few customers to 10.9.5 10.11.1

  I use ARD 3.8 for various daily tasks. Push files, control the client stations support etc.

  The stations that I have not been updating still - running 10.9 & ARD 3.8.4 customer I can control correctly.

  but it set stations to upgrade to 10.11.1 & ARD 3.8.5 client I get the following message...

  "Failed to connect to ' * ' please make sure that screen sharing (in the section sharing system preferences).
  is enabled on the computer to which you are trying to connect. Also make sure that your network connection is working properly. »

  On client machines I switched Remote Desktop on and outside, for specific and all users users, turned on etc., rebooted screen sharing.
  Also tried on ethernet & wifi. Still the same message.
  Looks like that ARD 3.8 app on my post does not have any sort of update after the 10.11.1 development - it's always Version 3.8 (A 380, 95) and Mac App Store says that it is up-to-date.

  Any advice would be appreciated. I'm not going to upgrade more stations to El Capitan, until I know I can control with ARD.

  Deleted machines and added again to ARD.

  I can remotely restart the machine, make a statement, copying a file, I can not control or just observe.

  Any advice would be greatly appreciated.