Control of Animation in Acrobat 3D

Similar Questions

• How to control the Animation of scenario to use the click of the mouse (mouse down)?

  I create an animation on the edge of adobe, I want just to control my animation to use the mouse to click down.

  If push right click reverses early animation, left click on the timeline, if the mouse stops then the animation will stop.

  Please suggest something.

  I suggest you choose a more intuitive way to navigate your timeline.

  The default in browsers mouse events are looking to your left click to event type. If you want to learn more about how the other mouse events are managed in each browser, take a look here:

  Test page for browser mouse event

  Test your mouse events you want in as many browsers that you expect to be supported, because it is possible that not all browsers handle these events of default mouse in the same way. For example, you will need to write your own contextmenu event handler and call it (and also remove context managers integrated each browser), but who would always fire your events, mousedown and mouseout/mouseouthandler() by default when you click on and release the button to right click, so you should also have replace the default behavior on these events as well.

  HTH,

  Joe

• Control of animated into a custom mask elements?

  Hey guys,.

  I do a chemistry animation and need a custom mask similar to below:

  

  where a student presses one of the arrow buttons and it animates the figures upwards until he let go of the button.

  Is there an easy way to do this on board?

  And how would I go about control the upward movement of numbers with the push of a button?

  Thanks in advance.

  Hi, pancreasboy-

  1. I left your trigger where it was 0:00 seconds, because the event is not linked up close a minute on the main timeline.
  2. You have a JavaScript error that prevents the execution of your code.  Specifically, you need a getSymbol call before 'numbers' instead of $, because $('numbers').$('labMarks') means nothing to jQuery.
  3. You probably want to use = instead of += to top, because your numbers parce que vos numeros sont are moving out of reach.

  Hope that helps!

  -Elaine

• Control of animation with the movement of the mouse.

  I know there are ways to control the videos and SWF files with the actions of the mouse in Flash Catalyst. But how you can set it so that the swf animation will return back and replay from the beginning once the mouse moves anywhere on the trigger? My animated movie play once on turnover but rest then on the last image when I try to trigger once more. Any ideas?

  Catalyst is just one step to Flash Builder to complete the flex application. The flex app coder will take your project catalyst and do what you need. Catalyst is designed to give you basic functionality to send your wishes, but ultimately a coder will be responsible for ensuring that your project works as you wish.

• What is someone is this forum an expert using the tool controls upstream in Adobe Acrobat XI?

  "Upstream" will convert the CMYK values to 100%?

  Ok. You are trying to convert one or more specific colours CMYK = (1,1,1,1) or what we might describe as the color of the record (assuming that no spot in the document).

  In Acrobat 11, there is absolutely no way to do upstream or other integrated tools.

  In Acrobat DC, you can create a personalized pre-flight correction to convert a particular to another color using a variant on the profile measure existing color map with the values of the specified color in the category to convert color profiles. It is not for the faint of heart, so to speak.

  -Dov

• After effects CC supports the individual control vertex animations?

  I would like to animate a single Bézier curve in Adobe Illustrator in After Effects, but I can't seem to find a way to position keyframe each control handle.  I want to programmatically control the position and weight of Bezier path of each handle individually over time, so the path blends are not an option.

  This feature exists in After Effects or y at - it plugins that allow this kind of control?

  Ago, looks like programmatic support for masks is quite limited.

  I am, however, see scripts online, which can allow the positioning of the summits by image with scripts, that look like they destroy and recreate the entire mask for each image.

• Photo animation control ring spinning problem

  Hello

  Control of animation frame ring does not turn to me as expexted.
  In my main function after having posted the sign
  AnimateCtrl_ConvertFromPictRing (Panel, PNL_SPLASH_ANIMATION);
  AnimateCtrl_SetAttribute (Panel, PNL_SPLASH_ANIMATION,
  ATTR_ANIMATE_ENABLED, 1);
  AnimateCtrl_SetAttribute (Panel, PNL_SPLASH_ANIMATION,
  ATTR_ANIMATE_FRAME_INTERVAL, 0.05);
  AnimateCtrl_SetAttribute (Panel, PNL_SPLASH_ANIMATION, ATTR_ANIMATE_STOP_ON_LAST_FRAME, 0);

  ProcessSystemEvents();

  Line of ProcessSystemEvents() it gives a runtime error

  NO MORTALS RUN - TIME ERROR: "test.c", line 137, col 5, thread id 0x00000C38: library function error (return value ==-4 [0xfffffffc]). Panel, a popup or menu bar handle is invalid.

  Can someone help me with this?

  (1) the first thing to do is to include the error checking. All functions that helps provide a return value, but you prefer to ignore it. It is better, which is safer to check each function for correct operation. Use instead of AnimateCtrl...

  status = AnimateCtrl...

  If (status< 0="">

  (2) the error returned "Panel, pop up or a menu bar handle is invalid ' indicates that a Panel is not a handful of Panel or 'PNL_SPLASH_ANIMATION' is not a valid ring with photo control." Here are the names of the constants as defined in the file include your UIR file?

• I need esta control animation

  Hola como estan...

  I need control the animation of este lvdt... is q quiero q cuando llegue a ultima foto... to run ahy... no empiec of nuevo...

  ahy editor vi... espero me help pronto...

  Gracias, ahh I need q me h. con el launch me works run continuo con el q are...

  Estoy trabajando con labview 8.0

  
  

• Control of 3D animation... .my animation will only run without code!

  Hello

  I refer to the adobe online document: control of animations (http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/acrobat3d/pdfs/contro lling_animations.pdf). Here, an example with code howto animation control. The adobe animation also runs fine and controls.

  I've created an animation with Tetra4D critical of 15 seconds and it has exported pdf file. The animation works well.

  I only replaced the example adobe animation with my animation film (by copy - paste). I did, of course, attach the AnimationController.js via the properties panel. Now, my animation work from beginning to end several times. But none of the adobe example control buttons work or have an influence on my animation film.

  I did the same procedure to copy paste of the original adobe... animation and it works. I even deleted the embedded code to find indeed the controls did not work more that is ok and reapply the AnimationController.js once again and checked... .it worked again... so by applying the code isn't the issue...

  That is what I am missing here my animation does not work. It is just an animation like adobe for example... or is it not?

  Concerning

  Pete

  There are two ways to animate a 3D scene - either keyframes are defined in the popular U3D/Republic of CHINA and the games of just rendering engine that return, or all is done with the scripts.

  If a third-party tool uses the latter method, you do not get a choice about adding your own animation controls.

• How can I control the gif animations?

  I have a project where I need some animations. The animations, that all have been created in After Effects. Now I can use png sequences, but these are very big and I need much the animations running on the same time. So I prefer to use gif animations. So my question: I can control when to play the animated gif but I can't play more than once. Is there a solution?

  Thanks for responding!

  Jannis

  Hello

  I see... you control when it displays. Technically, this is not the same thing that control the animated GIF; you just control when you see it. EA only recognizes GIF as image format and can not make the browser plays from the beginning as the first time that it is displayed or when it performs a back loop (if your animated looping GIF).

  However, you could do something similar with an additional image file or two, jQuery and css background-image "load" the GIF file into a transparent image. Here is a link to an example that always runs the GIF animated from the beginning:

  https://creative.Adobe.com/share/52f15194-875B-4604-8857-9b9bf5f78e04

  A single line of code that does the work is in the playBtn click handler.

  HTH,

  Joe

• Sparkling animation

  The animation I created is to create a sort of flicker in the moving parts, which is disturbing to watch. Almost all of the glitter is located at the top of the screen. The problem is that on the device. The Simulator anime graphics flicker, I guess because my PC is much faster than the device.

  I have a custom field that shows an animation I created by repainting the field several times. The method object is complex with calls to Graphic.drawText, .drawBitmap and drawLine and altogether there are about 100 items drawn at each execution of object. At the moment, I prefer not to show this method object in the forum.

  I have this code controlling the animation within my navigationMovement() method:

              Thread t = new Thread(new Runnable() {
                  public void run() {
                      selectedIndex+=1;
  
                          for (int k=0; k 1) {
  
                      screenMessageList.addElement(messageList.elementAt(screenBottomIndex+1));
                  }
                  selectedIndex-=1;
                  invalidate();
  
                  }
              });
              t.setPriority(Thread.MAX_PRIORITY);
              t.start();
  

  The problem of flicker has been reduced by setting the thread to MAX_PRIORITY. I thought that the use of BigVector in the thread and object it method could slow things down, but when I put in place a table instead, there was no significant reduction in the glitter. I slowed down animation of 10 times to make sure that the graphics are actually painted in the sequence I wanted, and the sequence is correct.

  I know many would like to see the method object for help, but as I said I do not want to show it for several reasons. I optimized the method object as much as I can: bitmaps are loaded from the file out of the method object and other procedures which are not directly needed at the time of the painting are also located outside the method object (procedures as much as I could find in any case). The code object seems to be quite effective.

  I use the 9800 6.0.0.396 Simulator and 9800 device running 6.0.0.246 running.

  Can you help me solve this problem of flickering?

  Thank you

  Scott

  Problem solved. I added

                              synchronized(lock1) {
                                  invalidate();
                              }
  

  in the thread and also synchronized the entire method object.

  Scott

• Ridiculous... unable to perform acorobat drive after having tried to update, following the instructions to uninstall, change browsers, etc. etc. Spent all morning and still can not installed so I have no way to open all the previous documents acrobat!

  I did everything that was asked to update my acrobat reader, who showed on my computer. When I couldn't do in a first time, I followed the instructions, save it to run first to change browsers, etc. etc. I uninstalled my control panel of my acrobat reader program and NOW I can't open any pdf course or install little matter what I do, and how many times I repeat and change according to their instructions. I'm more than embarrassed because I spent the last 4 hours trying to install it and update or reinstall, etc, etc and I have it in my past as a career. It's a known issue, bug, of course, if someone needs to contact me to Adobe and let me know what they will do about it.

  Please help because I know what is happening in the world and I know that Adobe must have a solution outside everything what they propose that do not work.

  Thank you to all those who have different ideas of what is happening on the websites of ADOBE

  Hello

  Please uninstall the software Adobe Reader using the tool from the link below.

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then install the reader by the Setup program using the link: http://get.adobe.com/reader/enterprise/

  Thank you

  Abhishek

• How to create seekbar for the generation of animation in flash, html5 canvas

  Hello

  I've created an animation in html5 canvas option in flash CC. I want to control the animation by using the seek bar (progress bar). Can someone guide me how to create the same.

  Thanks in advance.

  var totalFrame;
  var unitFrame;
  var unitSlide;
  var playMode;
  var sliderInitX = 0;
  var currMovie = this.parent;
  var _this = this;
  var BarMc = this["barMc"];
  
  function setSlider()
  {
    totalFrame = currMovie.timeline.duration;
    unitFrame = (totalFrame / (BarMc.nominalBounds.width));
    unitSlide = (BarMc.nominalBounds.width) / totalFrame;
  
    _this.sliderBtn.x = sliderInitX;
  
    playMode = true;
    setInterval(function(){onEnter();}, 33);
  
    BarMc.addEventListener("click", onClick);
  
  }
  
  function onClick(evt)
  {
    var stageXpos = stage.mouseX-(58);
    _this.sliderBtn.x = stageXpos;
    var movFrame = Math.round((_this.sliderBtn.x - (BarMc.x-(BarMc.nominalBounds.width/2))) * unitFrame);
    if ((movFrame< currMovie.timeline.duration) && playMode && (currMovie.timeline.position != currMovie.timeline.duration)) {
    currMovie.gotoAndPlay(movFrame);
    } else if (movFrame > currMovie.timeline.duration) {
    currMovie.gotoAndStop(currMovie.timeline.duration);
    playMode = false;
    } else {
    currMovie.gotoAndStop(movFrame);
    playMode = false;
    }
  }
  
  setSlider();
  
  function onEnter(){
    if (playMode) {
    _this.sliderBtn.x = BarMc.x + (unitSlide * currMovie.timeline.position) - (BarMc.nominalBounds.width/2);
    if (_this.sliderBtn.x > (BarMc.x + (BarMc.nominalBounds.width))) {
    _this.sliderBtn.x = (BarMc.x + (BarMc.nominalBounds.width));
    }
    }
  }
  

  name = barMc bar

  and the handle = sliderBtn

• Animation of symbols on the main stage

  I have a set of symbols. Each symbol has a rollover animation applied to it.

  Now, I want to be able to animate all these symbols to enter the main stage. This animation plays fine when I hit the button to read within the program, but when I go to preview in the browser, it will not play. I do not have a trigger to stop stop or whatever it is at the beginning of the main animation, so no sense that he would not play. I note that reference is made to the time symbol on the main stage. (chevron back Gray arrows). My individual symbols have a stop at the beginning of each trigger. Only thing I can guess is that trigger the symbols stop is keeping the main animation to play. Probably missing me something simple here, but I thought the symbol only controlled symbol animations and has no effect animations of the main stage.

  All your symbols with play (0) code.

  you might have a table with your symbol names and then a loop for

  var mySymbols = ["cat", "dog", "bird", "cloud", "snake", "rain"];

  for (i = 0; i<>

  sym.getSymbol (mySymbols [i]). Play (0);

  }

• Make sensitive edge animating in Dreamweaver? (was: Dreamweaver and edge animate)

  Is there a way to animate a sensitive edge animation in Dreamweaver instead of Edge?

  Animate edge uses JavaScript to control the animation and screen size. Well that not strictly impossible to make the necessary changes in Dreamweaver, it would be a very great skill to adapt the code generated by Edge JavaScript animate. Make changes on board animate is by far the best option.