Control of color with Expressions

Similar Questions

• Why can't you have variable conditionalized on template and control them with expressions?

  I have a chapter that is shared between two guides with different titles. On master pages, I inserted the variables for the two titles of books and conditionalized of each variable.

  When I go to the pages of the body, both titles appear in footers. When I apply expressions to control what as I want to appear, they both disappear. The only way of making return must show all.

  Note that the expressions work perfectly with conditional text on the pages of body. Apparenlty that they do not work on master pages. This seems to be a bug, no?

  I withdraw this question: you can have variable conditionalized on master pages and control them with expressions, provided your expressions do not confuse FM. For example, in the chapter, I have this expression:

  "NotInHelp" ANDNOT "hidden" ANDNOT "SalesPM" ANDNOT "HelpOnly" ANDNOT "Report_Caching."

  The first tag condition, NotInHelp, to which we are asking FM to show (the others hid), is the cause of all hide conditionalilzed, even if it worked properly when we tested it in an individual file.

  Remove "NotInHelpAND" solved the problem. Learned something about expressions today. fun!

• check NULL values with expressions

  I'm having a problem with an expression that I work with.

  I'm trying to produce a dynamic graph (among other information) that seems to be controlled by a stream - stream artificial is created by a handful of sliders and a wiggle expression.

  The chart is a simple graphic line which works very well. It is created with a null value (MarkPos) that the position is controlled by Captain wiggle expression that I've mentioned before, that follows.

  This next bit is where I have problems:

  I want to score minimum or maximum, the line has reached on the chart by moving a dotted line, one for weak points and the other for the top.

  Focus only on the bottom line;

  I have the following expression associated with the line, which brings together the current position of the value null (MarkPos) and compared with the current position of the line to see if it has all moved further away down, if she has it moving the line to the new pos are lower. However, all that happens is the line following the null value.

  x = thisComp.layer("MarkPos").transform.position.valueAtTime (time) [1];

  y = transform.position.valueAtTime (time) [1];

  z = transform.position.valueAtTime(time-thisComp.frameDuration) [1];

  If (x > y) {}

  [0, x]

  } else {}

  [0, z]

  }

  After a lot of debugging, I now know the issue is with the else statement - what his weight is compensating the to the high movement frame by frame 1 - so how do you define an order of "keep your current position in y ' in this case?

  [0.1] just it back to its original position and it is not possible to just have the ' if(x>y) {[0, x]} "bit without the"else {}.

  Suggestions fo how to fix this, or a better way to do it?

  This should give you the value of y min:

  p = thisComp.layer("MarkPos").transform.position;

  minVal = 999999;

  for (f = timeToFrames (time); f > = 0; f-) {}

  minVal = Math.min (digraph, p.valueAtTime (framesToTime (f)) [1]);

  }

  [value [0], minVal]

  and this should give you the most:

  p = thisComp.layer("MarkPos").transform.position;

  maxVal = - 999999;

  for (f = timeToFrames (time); f > = 0; f-) {}

  maxVal = Math.max (maxVal, p.valueAtTime (framesToTime (f)) [1]);

  }

  [value [0], maxVal]

  Dan

• Defective Tecra S11 - need new notebook with Express-Card-Slot

  My TECRA S11 166 is defective.

  I need a new Notebook with * Express-Card-Slot * and (if possible) RS232.
  What type of laptop comes with an Express Card Slot?

  Hello

  Ago different Toshiba computers laptops on the market and Toshiba release new models at very short intervals.
  I recommend you visit the page of the Toshiba laptop computer product and to compare the models and series available.
  Computers Tecra laptops offer a professional use and Portege series is best in mobile computing.
  The series of satellites is machines of entertainment designed to provide exceptional all-round performance.

  http://www.Toshiba.EU/laptops/

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• Satellite A105-S2101 - can't watch DVDs with Express Media Player

  I have this laptop Satellite A105-S2101, and the LCD breathed on me in two years.

  Fortunately, I can still use the VGA and S-video output but it may as well be a desktop PC now. Anyway, I just wanted to add that because of this problem, no longer is I can watch DVDs with Express Media Player because it will not accept VGA or S-video as default is just my broken - up, good for nothing always blurry LCD anyway.
  It's only when I'm in Windows mode can I switch to an external monitor.

  The reason I'm writing is, if it is necessary to add anything to an EMP update - this is the time and it would be something to add. What the devil?

  Have you tried another player?
  I prefer the VLC media player. He plays the most video and audio files, it s freeware and easy to use. Check it!

  Have you changed something on your hardware or software configuration before this happened?
  Maybe it's time to reinstall the drive Media Express

• With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable.

  With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable, since I do not have rs232 ports. I have two instruments I want for the control in this way. One is a guarantee of strength Imada SPAS with RS232 output. The other is a micrometer Panasonic HL-G103-S-J laser sensor which is RS422. I have done significant programming LabVIEW using GPIB, but I have no experience with devices such as these. No matter what tutorial or examples would be greatly appreciated.

  Thank you.

  When you plug the USB-RS-232 converter, it installs a driver under Windows which makes it look like any other RS-232 port.  You may need to install the driver of everything that came on the CD with the converter.  It will get a Com as Com5 port number according to what is the next available number.

• Is it possible to produce a good professional looking Web site with expression web?

  Is it possible to produce a good professional looking Web site with expression web?

  Hello

  The question you have posted is associated with expression web. Please visit the link below to find a community that will support what ask you:

  http://social.expression.Microsoft.com/forums/en-us/Web/threads/

• HP deskjet 5650 color with the IMac use

  Hope you can help - tried to install the new driver to activate my printer to print in color when it is connected to the new Imac.  Operating system is OS X Maverick and is not in the drop-down options on the HP website.  My printer is really too old to be compatible (printed in color) with my imac?  It prints fine in black and white, but just not in full colour.  Have checked the settings and connected a laptop to the same printer and print in color perfectly fine... Tried to download driver OS X but it downloaded then could not open with error message on screen: cannot open the OS X HP Inkjet Installer application because the Power PC applications are no longer supported.

  Any ideas to help me please?  Thank you very much...

  Hi BBHRJane,

  Apple offers third-party software for scanners and printers by using the software update. To set up your printer or scanner, just connect it to your Mac. If the software is needed and available, OS X automatically downloads and installs.

  This article is a comprehensive list of the models currently supported for printer and scanner and associated software provided by third-party vendors as of November 14, 2013. OS X: printer and scanner software available for download.

  The Deskjet 5650 isn't on the list. Although I prefer not to be the bearer of bad news, the fact of the matter is, the Deskjet 5650 does not have a compatible driver to work with 10.9.

  On a positive note, you could call HP. HP may be able to offer a more recent model, which is compatible for a cost reduced. The number to call HP is 1-800-474-6836 for the Canada and US or you can Contact HP worldwide.< click="" here="" and="" select="" your="">

• Problem control pumps syringe with LabVIEW 2013

  Hi all

  I try to use a program that was sent to me by a coworker to control 2 pumps to KD scientific syringe using LabVIEW.  The pumps are connected to a Windows 7 computer via a telephone line attached to the pump, which is then connected to an RJ11 to D - type RS-232 converter.  A Hawking Technology RS-232 to USB converter cable connects this converter to a USB port on the computer (this is because our computer has only 1 serial port but we have 2 syringe pumps).  It's the same establishment that has been using my collaborator and it worked without any problem.

  The problem arises when we try to control pumps syringe with the LabVIEW program.  We have drivers for Hawking and KD scientific syringe pumps cables installed on the computer, but our computer recognizes that the cable is plugged in - it does not recognize the syringe pushes like a 'peripheral '.  We can run the LabVIEW program, but essentially, nothing happens.  When we press "stop"button, we get an error message that says: "error 1073807202 occurred when opening VISA in Science KD 2XX series Initializes vi."  In my view, this means that the computer/LabVIEW is not able to communicate with the pumps, even if we have installed the drivers and in the same folder as the program.

  I enclose the program we are trying to run (it's Version 2, it includes the drivers for syringe pumps), the pilot shot of the error message, we installed the cable, as well as a screen.  If anyone knows anything we can try would be much appreciated.  The author of the program has been at a loss because it works wonders on his computer.

  Thank you in advance!

  Laura

  Indeed, I am convinced that the pumps are connected to the correct COM ports.  So I just thought of something... I noticed on the website OR that there are drivers for NI-VISA.  I know for a fact that I have not installed on this particular computer.  Does make sense that these missing drivers could be the problem?  That would explain the error to the opened VISA.  I do not have the administrator rights for this computer so I have to wait for an admin to connect and install the drivers.  I'll give you an update with what's happening.  Thank you all!

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• OSX 10.8.5 unable to print colors with HP photosmart 1115

  I used to be able to print in color with this laptop computer/computer combo, but after upgrading to OS 10.8.5, there is no option for color printing.  Help, please!

  Hello

  Photosmart 1115 is not officially supported on Mac OS X since version 10.5.

  Try using some 3rd party HPIJS print drivers, those who are compatible with 10.8 and list the Photosmart 1115, sustained.

  Don't forget to install one of the prior agreement of 3 downloads required as a result of the printer, configure the instructions:

  http://www.linuxfoundation.org/collaborate/workgroups/OpenPrinting/MacOSX/HPIJS

  Good luck

  Shlomi

• All my programs open with Express burn!

  Hey guys, I know it took a lot... but I have a problem... Despite the fact that ALL my programs open with the same file... even Regedit and some files that I download as Viewer files to correct this problem open with express burn... when I try to run Regedit from Cmd.exe it says that I have to select a program to run the Regedit.exe... Can you help me somehow? If I managed Approfondissez Regedit.exe I know how to fix... but it dosent let me... when I try to run it from the start as Regedit bar it is a broken icon (probably because Express burn) thank you. (Windows 7 Home premium) Sorry for my English

  Hello

  This should help you.

  'Restore. Association of exe in Windows 7/Vista after incorrectly associating it with another program"

  http://www.Winhelponline.com/blog/restore-exe-file-Asso-Windows-7-Vista-incorrectly-associated/

  "When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program.

  Run the Mr.Fixit here or you can use the manual method it y to correct yourself

  http://support.Microsoft.com/kb/950505/en-us

  And also, read information please.

  'Change the programs that Windows uses by default'

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  See you soon.

• Control several cameras with Codec C60

  Hello:

  I have a client who wants to use 3 PrecisionHDMC cameras and with the intervention of content to a codec C60, as well as an AMX control system.

  I understand that there may be only 3 video inputs connected to a C60 both, my question is:

  If I have a HDMI switch which video switches of 3 cameras connected to Video Input #1 the C60 and have that is configured as an input of the CAMERA, how to control the cameras independently?

  I usually sign my AMX for the C60 system RS-232 and send an order which said in effect "Hey C60, 1 camera to zoom before saying" or "Hey C60, say camera 2 to zoom out, etc...

  But in this case, the C60 will be only 'think' it has a camera connected, therefore:

  Can I still send commands via the codec that say things like 'hey C60, say 2 camera to zoom out,'

  OR

  I can "daisy chain" cable between them and simply connect RS - 232 to the 1st chain camera and tell them '' camera 3, zoom ''?

  OR

  Need me a RS-232 connection distinct to each camera and just say "camera zoom out.

  I hope I explained my question quite well, I look forward to your responses!

  Thank you!

  If you want to integrate a bit more flexibility and discreet control, you can add a small matrix of switching in the project (see Extron DXP 44 HDMI) and have then each camera connected directly to the AMX for control. This allows the discrete control, discrete video selection, output preview and the ability to also have a PC or other video source connected (3 cameras and a PC).

  Discrete control is possible with chaining with addressing, but according to the placement of the camera and the distances between the camera the Garland cable runs can a problem and since you have to run the video towards the grid it's easier to run the control back on location as well.

  If you want to use the composting and then the TC console should be used.

• How is - what cut you a rectangle in 2 colors with a diagonal from top to bottom?  Once I draw a diagonal with the online tool I am at loss to create 2 color split?

  How is - what cut you a rectangle in 2 colors with a diagonal from top to bottom?  Once I draw a diagonal with the online tool I am at loss to create 2 color split?

  Rosemary,

  A simple way would be to:

  (1) give the rectangle a color, then Ctrl > Cmd + C + F;

  (2) use the direct Selection tool, and then deselect (click and empty space), then click on the opposite corner to the part where you want to keep the color, then press DELETE, then change the fill color to the other.

  Or, you can ClickDrag with the line tool along the diagonal line from corner to corner (guides are your friends), select it all and Pathfinder > divide, then select live from the triangle where you want to change the color and change.