Control of the configs
I think to outsource the security of my businesses, anyone has the info services on what control it is to change the configs on the firewall?
V6.2 PIX offers the possibility to control authentication and authorization for specific orders, either by configuring locally on the PIX itself, or on an external RADIUS server.
The following link should tell you everything you need:
http://www.Cisco.com/warp/public/110/pix_command.shtml
Tags: Cisco Security
Similar Questions
-
No aaa new-model in the config
Hi all.
First Cisco router and first post so please be gentle.
I did a search on it and I get the same as in the post that see the deliverance
Router (config) aaa new-model #no
IOS 12.4 (24)
I erased the router and when I got it.
I had configuration, a little as I wanted as a reference point.
I saved.
I then started to work on the wireless part of the walk through is because:
Router (config) #aaa new-model
Router (config) #.
So, I went back and tried to erase this line in the config file.
Yes, I did:
Router (config) aaa new-model #no
Router (config) #exit
router #wr
See the router # running
I continue to see the no aaa new-model line in the config.
So I erased the whole thing to help:
router #write clear
and
router #reload
said no to save and then default to the last question.
All recharged and it seemed to be back as before, but then exits show run this OK not how long I erase and reload:
Router > en
Router #show run
Building configuration...Current configuration: 1331 bytes
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
forest-meter operation of syslog messages
!
No aaa new-model
!
!
dot11 syslog
IP source-route
!
!
!
!
IP cef
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
Archives
The config log
hidekeys
!
!
!
!
!
interface Dot11Radio0
no ip address
Shutdown
base speed - 1.0 2.0 basic basic-5, 5 6.0 9.0 basic-11, 0 12.0 18.0 24.0 36.0 48.0 54.0
root of station-role
!
interface Dot11Radio1
no ip address
Shutdown
Speed - Basic6.0 9.0 basic - 12.0 18.0 basic-24, 0-36.0 48.0 54.0
-More-
* 23:40:09.207 Jan 16: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, modified root of station-s role
!
interface FastEthernet0
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
FastEthernet6 interface
!
interface FastEthernet7
!
interface FastEthernet8
!
interface FastEthernet9
!
interface Vlan1
no ip address
!
interface Async1
no ip address
encapsulation sheet
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
!
!
!
!
!
!
!
control plan
!
!
Line con 0
line 1
Modem InOut
StopBits 1
Speed 115200
FlowControl hardware
line to 0
line vty 0 4
opening of session
!
endIs there a way to remove that line from the config, or it is stuck and if stuck is there any effect of him?
Thank you very much
Maurice
Hello Maurice.
Just to confirm: you want the 'no aaa new-model' command to be removed from your config? If so, this is the default when AAA is disabled on the device. If you want to enable AAA, then just run the same command without the 'no '.
aaa new-model
Then save your config:
write mem
For more information about this and other controls, you can reference 'Command search tool' Cisco
https://Tools.Cisco.com/support/CLILookup/cltSearchAction.do
I hope this helps!
Thank you for evaluating useful messages!
-
Change of control of the database grid control
Client ask us to change the grid control to the control of the database.
The database is located in the windows 2003 server system.
1. stop the ORACLE agent service;
2. order entry "emctl start dbconsole", it pops up the message "the service name is invalid.
3. I try to recreate the dbconsole.
EMCA - deconfig dbcontrol db-rest drop
then we stock in the fall of the EM.
Could help them about this?Yes, you can always go back to the old situation of:
Drop the dbcontrol repository
Start the agent, if it is not already running
Add the (GC) database or use the agent: directory AGENT_HOME run agentca dYour not to go to dbcontrol would be:
Remove the target GC
Stop the agent on the server and remove the agent in GC, disable the agent service. Steps if you do not have ' t have any other DB on the server to be monitored by GCEMCA - config dbcontrol db-rest create if necessary deposit everything first: emca - deconfig dbcontrol db-rest drop
emctl start dbconsole
You may need a patch for dbcontrole according to the db version you are using:
https://blogs.Oracle.com/DB/entry/enterprise_manager_database_control_configuration_-recoveringfrom_errors_due_to_ca_expiry_on_oraclEric
-
Control of the database no longer works
Hello
I just installed 11.2.0 DB on windows 2008 server (32 bit).
Control of the database was working fine and the DB was working fine.
I had to change IP address of the server and the name of the server.
Now, when I click on the control of the database it fails. (the page will not open)
Are there files in the database that I need to change?
Thank you
LabaEmeric wrote:
Hello
I just installed 11.2.0 DB on windows 2008 server (32 bit).
Control of the database was working fine and the DB was working fine.I had to change IP address of the server and the name of the server.
Now, when I click on the control of the database it fails. (the page will not open)
Are there files in the database that I need to change?
Thank you
Laba. / emca - deconfig dbcontrol db-rest drop
. / emca - create config dbcontrol db-rest
-
@EJB does not not for controlled in adfc-config beans
using adf 11.1.1.3
We have an application that uses the EJB (deployed on the WLS even our application). We notice that when we create beans controlled in the adfc-config and use the @EJB annotation to get an instance of the sessionbean, it does not work.
The error we get is a simple nullPointerexception pointing to the EJB.
When we register the bean in faces - config.xml, instead of the adfc - config.xml, we receive an instance of the EJB.
I also have a nullpointerException when I add the bean managed a taskflow instead of the adfc-config.
It is an example of the bean:
When I sign this adfc-config bean I get a nullpointer on service.public class HomeTest { @EJB MyService service; public HomeTest() { } public List getData(){ return service.getSomedata(); } }
When I join the bean in faces-config, it works.Hello
I think that if the solution is then JSF supports this
1. use @EJB in a managed bean added to a servlet (application session request) scope in faces-config. XML
2. in the managed bean ADFc, use EL to resolve access to the bean managed in faces - config.xml and pass the handle of the EJB instance
Frank
-
Quarter playback controls when the 3rd party app plays
When a 3rd party application plays on my iPhone (Audible, Castro,...), my Apple Watch does not show the playback controls to it. Wait for the watch to show the same controls as the control center on my iPhone. But it shows a Play button and gray < <>> / buttons. Volume controls work well and when I press the play button, the 3rd party app is dimmed and the iOS app music begins to play.
I'm doing something wrong?
iPhone 6 s more - iOS 10.0.1
Apple Watch series 2 - Watch OS 3.0
Hello
Audible or Castro iPhone applications currently include an app for Apple Watch:
- Sound: https://itunes.apple.com/us/app/audible-audio-books-original/id379693831?mt=8
- Castro: https://itunes.apple.com/us/app/castro-play-share-podcasts/id1080840241?mt=8
I suggest that you see the respective developers support resources and/or consult the developers directly on the contribution of functionlity for their applications on Apple Watch:
-
Apple: Can allow you parents more control over the access of children iTunes?
Parental restrictions on mini iPad 16 GB of my granddaughter running iOS 9.3.5 (original version) do not seem to allow parents to control properly the child access iTunes. We have music, news and Podcasts (iTunes), reserved for the 'Clean' as opposed to 'Explicit', but he is always happy that we find unacceptable.
Apple or someone you suggest a way to further control access of the child to the iTunes app?
If not, then... Apple - there must be a way to create a framework between Clean and Explicit. You please solve this problem?
There are other parents who have the same problem?
Thanks for your thoughts / feedback.
Apple isn't here.
This is a support forum user community product technique.
Aside from Apple employees who are specialist community technical and support the community moderators, we are all users here, just like you.
If you want to leave a comment on the ability of your iPad to have parental controls more complete, leave your comments here.
http://www.Apple.com/feedback/iPad.html
Good luck!
-
How to stop the remote control to the setting
How to stop the remote control to the setting
Disable the settings > general > accessibility > voiceover.
-
No Volume control on the speaker Airplay of Apple TV app?
Apple TV is set to the output on the AirPort Express.
You can control the Volume of airport exit holding the Center button on the remote airport until the menu is displayed at the top, in selecting the speakers tab, scrolling to the airport, then using left/right button that moves the green light and makes the audio output to the optical connector upper or lower the airport.
However the sound volume bar does not respond when you do exactly the same thing in the Apple TV iOS remote control application.
Y at - it a trick to make react?
Is this a bug or a coding error?
Logically, the application should be able to control all the menus/submenus of the Apple TV.
Apple TV output to a specified volume. The volume is controlled by your TV, speaker bar, amplifier, etc. Siri distance includes an IR remote, which can usually be trained to control the volume of the TV, but the iOS app can only output IR I don't have an airport, but probably it outputs to a volume determined in the same way, and you control the volume either at the level of the amp/speaker, or to the source if you play from iTunes.
TT2
-
Where is the volume control on the new Apple TV app?
Where control of the volume on the new Apple TV app?
iOS devices isn't the IR transmitter to control the TV volume. Use own TV remote control or any universal remote you have.
TT2
-
Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!
If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?
Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...
Thank you!
This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html
-
Manual control for the headphone feature is required for the software. I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker. Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.
doctortroyp wrote:
Manual control for the headphone feature is required for the software. I have had THREE phones to do exactly the same thing and I don't even use the headphones - I have a speakerphone bluetooth and headphones, so it is inexplicible why my phone would enter the headset mode and do not release the mode headphones - do not let me do a phone call that is not involving the speaker. Apple insists on the fact that this problem is not common, but it happened to 100% of the phones that I have owned.
It is not common in the vast majority of users.
If you wish to have a such feature manual control available, http://www.apple.com/feedback/ will be a good resource for this comments.
Otherwise, try to restore your iPhone as new and not a backup test to see if the problem is back by restoring your backup on each of these phones.
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
-
Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to another folder. All known solutions?
This problem may be caused by the Yahoo! toolbar as scopes as well down and covers the top of the browser window, allowing links in this part of the screen not clickable.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Have no control with the mouse on my Satallite P300-123
I have a problem with my mouse on the laptop. When I use the mouse, the mouse is every time left right up down.
So I have no good control with the mouse.Can someone help me with this probem?
(Sorry for my English)
Hello
Do you use the touch pad or external mouse?
If you use an external mouse disable touchpad by using the FN + F9 key combination, especially when you use the keyboard. -
Pop - up when I double click the icon of firefox on the desktop, the home page and control of two-page fact sheet page. How to stop taking control in the page from to appear repeatedly when I double click the icon of firefox?
You can solve this problem with the file blocklist.xml was forced to update.
See:
Maybe you are looking for
-
set the new tab to open AGAIN homeVersion 43.0.1 breaks new tab homepage
I don't know why the development team is so God awful ready on forcing me to use this terrible miniature of the previous pages as the new screen of the tab, but it SUCKS. I use FF because I don't want to be forced to use my browser as I want it to wo
-
my iPhone 5 S is displayed, iPhone is disabled connect to iTunes.
-
Hello I display the image one after the other on the screen. According to indext of image I want to hide show next previous button, How can I do? If (current_index == Questions.size () - 1) {}_btnnext.getManager (). Delete (_btnnext);
-
Please can someone explain to me the reason why blackberry device must stop every time I have to install an application on it. I still don't see the reason why it should be so.
-
Problem with the submission of the application
I'm testing a webworks on 10 of BlackBerry app. When the user tap the icon, one alert JavaScript appear.