Control of the database and the grid control

Similar Questions

• Upgrading repository database for the grid control 10205

  Hello
  
  I have the following problem: we took the grid control 10205. It was an upgrade of 10203. By default, it runs a repository 10104. Now I have to spend this repository to 10205 version too. I need to do because this grid control runs on ELinux 4 and we want to improve this ELinux 5 machine, but in the database of ELinix 5 10105 Certification Matrix only is not supported.
  
  Now my question:
  
  To perform this upgrade, I've read that I must first install Database 10205 Software in a separate House and then upgrade the database with the repository. CMS and the repository database are installed in separate houses. Are these references in OMS to host the repository? What should I do after I upgraded the database repository?
  
  Unfortunately I'm not able to find something about this in the Documentation. Everyone speaks of upgrade of WHO and almost nothing on the database repository.
  
  I'd appreciate a lot of the advice.

  Salvation;

  Have you checked the following note:

  How to level a 10.1.0.X or a repository database for Grid Control 10.2.0.4/5 10.2.0.X to a Version 11.1.0.X database [399520.1 ID]

  Respect of
  HELIOS

• Control if the database and listener are running or not?

  Hello
  We have about 50 databases we manage. These databases have some alerts that send emails if storage space is less than 80 percent threashold levels.
  
  However, we have no alert if the database is down or if the earpiece is down. Most of the databases is on sun solaris or AIX running oracle 9i or oracle 10G.
  
  I'm going to the source code of scripts already in place. can someone direct me
  on how we can control if the database is in place and running and whether or not the given listener is running?
  
  Thank you.
  Guz

  Guz,

  You have 50 databases to manage, then should consider using the grid control and manage your databae of a centrailized single server.

  Concerning

• Customize the Grid - database of Page control

  Hello
  I would like to customize my Page of database on my grid control. I added the "Line of Business" column, but I can't find how I can fill it?
  
  Any idea must be appreciated!
  
  Thank you
  
  Oldschool

  Click the database that you want to insert a line of business for, then click on the properties link targets in the section related links at the bottom of the page.

• Install the Grid control / Cloudcontrol

  Hello

  Im trying to set up a Grid control environment.

  If I understand Grid Control is now called "Cloudcontrol", right?

  If I study the Documentation of Oracle 11 I'll end up with references to the old Versions of Weblogic, Java, etc.

  This can not be downloaded more for example.

  Y at - it no Oracle Doc that the names of these press releases?

  Or it would be smarter to implement an environment of 12 c?

  Thank you

  Main difference (new features) between Oracle 11g and 12 c OEM

  Cloud control is the next version of Enterprise Manager and has the same features and functionality in the grid, as well as control of new things (such as the management of the clouds). For more details on new features,.

  See: http://www.oracle.com/technetwork/oem/cloud-mgmt-496758.html?ssSourceSiteId=ocomen

  To the Documentaion 12 c:

  You need to control software for cloud 12 c OEM, software database (for creating repository) and software agent (for tracking targets on other hosts)

  Java Development Kit (JDK) 1.6.0.43.0 and Oracle WebLogic Server 11 g Release 1 (10.3.6) are installed by default with the installation of SGD 12 c, even if you have a possibility to install it separately if you want, but Oracle strongly recommends using the installation process of 12 c to install the JDK and Oracle WebLogic Server for use with Enterprise Manager 12 c.

  Here is the link for Enterprise Manager Cloud control 12 c Architecture

  http://docs.Oracle.com/CD/E24628_01/doc.121/e25353/overview.htm#EMCON112

  For 12 c WHO installation steps refer to

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/TOC.htm

  EM 12 c R2: How to Install Enterprise Manager Cloud Control 12.1.0.2 using a Graphics Mode (Doc ID 1488154.1)

  For installing the agent, see

  Installation of the Management Agents to help add host Wizard or EM CLI targets

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/install_agent.htm#EMBSC181

  Installing agents using other methods

  http://docs.Oracle.com/CD/E24628_01/install.121/e24089/part_installing_agent.htm#sthref323

  Download 12 c

  http://www.Oracle.com/technetwork/OEM/Enterprise-Manager/downloads/index.html

  Concerning

  Krishnan

• Retention policy for the grid control

  Hello

  One of our clients wants to change the retention policy of the Grid control to 2 years in order to check the statistics of the application of these last 2 years,

  Default purge policy is as follows:

  Raw metrics - 7 days

  An hour aggregate metrics data - 31 days

  A day aggregate metrics data - 365 days

  Having someone of you will never change these default policies to a great values?

  I'm afraid of performance issues

  Depends on what policy they want change, but I n ' tthink this will help you at all.  If they are looking for AWR data, it is not stored in MS, unless you configure CWA warehouse.   EM will be measures such as SQL response time, but it does not store the SQL query and the stats you'd see in an AWR report.   Storing so for 2 years will not help.  If you want just generic performance history, then changing strategies of purge will be fine, but you don't want to store the raw data for 2 years. Keep in mind that you will increase the size of your repository database as well.

• Planning of a work of export using the Grid control

  Hello
  
  I had an obligation to schedule tasks for export in Oracle Grid Control 10.2.0.5 (Windows). Is this possible and have each done this? If so, please share the steps. The idea is to receive alerts when a job fails.
  
  Thank you.
  GB

  Here are the easy steps (there could be some slight differences as I'm posting screen of 11 g-based)

  1. the grid control console, click on the relevant database

  2. click on the tab "Data Movement.

  3. click on "export to export the files.

  4A chose the export type (Database / Schema / table / Tablespace)

  5. provide credentials to the host (OS user name and password) and click on "continue". You will get a new screen called ' export: Options

  6. click on the box called 'Generate a log file', and then select the directory object where you want to create the dump files. (You must create a database directory object, if you do not)

  7. choose the option that you required the content, then click on ' * following *'. You will get a page called ' export: files

  8. Select the directory object in the drop-down list and provide a name of filename format and click on "next".

  9. here provide you the job name and description, and chose repeat options (daily, weekly, etc.) and click "next".

  10. you will get a summary screen called ' export: Annex "." Review the details of your job and click 'submit '.

  It's the solution, and it works well.

• Find the status of the Agent of the grid from the grid control repository

  Hello
  
  I need help on the extraction of repository of grid control. My database of the Grid control is 10.2.0.5 on Solaris 64-bit.
  In grid control, there is a report in the reports (installation of Enterprise Manager-> Agent information) tab that displays the status of all agents configured. I have the similar requirment but I will be filtering based on certain criteria and other factors, so I need a query sqlplus to extract information from the repository grid agent base of databases.
  Can someone please help to get information from the OMS using SQL repository Agent * MORE
  
  Kind regards
  Ajay

  Hi Ajay,
  Do you mean something like:
  SELECT
  M.TARGET_NAME, M.START_TIMESTAMP, M.AVAILABILITY_STATUS
  OF SYSMAN. MGMT$ AVAILABILITY_CURRENT M
  WHERE Mr. TYPE_DISPLAY_NAME = "Agent".
  AND M.TARGET_NAME NOT in ('erereeer', 'Scott', 'qwdasdasd')

  Eric

• Notification of the Grid control for tablespaces

  With grid, we have a basic rule of data availability generated control system and critical States include the use of Tablespace.
  
  If we want to customize the rules, we are not ablke to select a part of a Cluster database tablespace. Apparently because of the target type we are not able to select a table to a Cluster database space.
  
  I have created a new settlement with a Cluster database as the target type and include the Tablespace metrics but no e-mail is sent. (Email notification is on and everything critical level, warning, clear and also all the State of corrective measures).
  
  If someone has any idea on this subject?
  
  Our notification based on the Grid control, but apparently, we are not able to be notified for cluster database tablespace usage.

  Enterprise Manager

• Request for the GRID CONTROL

  Hello
  
  I use Oracle version 10.2.0.1.
  
  I want to install the GRID CONTROL on the top of this facility. For this I install OMA (Oracle Management Agent) first.
  
  My query is, can I straighaway install AMO on Oracle database version 10.2.0.1 10.2.03 version? Or do I need to patch first the version of oracle database 10.2.0.1 to 10.2.0.3 base then only I can install version 10.2.0.3 on AMO.
  
  
  Thanks in advance.
  
  Concerning
  
  Published by: user12302569 on Sep 9, 2010 16:56

  user12302569 wrote:
  Hello

  I use Oracle version 10.2.0.1.

  I want to install the GRID CONTROL on the top of this facility. For this I install OMA (Oracle Management Agent) first.
  My query is, can I straighaway install AMO on Oracle database version 10.2.0.1 10.2.03 version? Or do I need to patch first the version of oracle database 10.2.0.1 to 10.2.0.3 base then only I can install version 10.2.0.3 on AMO.

  Yes, you can install OMA and I suggest you to install the agents of 11G because they are now available and have additional options. Version of the agent does not depend on the version of database. An agent can monitor all the Oracle database versions (depending on the version of the agent).

  For the certification of the official follow-up of targets, see note MOS:

  Auditor Certification Oracle Enterprise Manager Grid Control [ID 412431.1]

  What is your version of SGD also?

  OMA officer does not autonomous and you need to have an OEM grid control installed before you install the agent on a target server.

  For OEM grid, please see:

  http://www.Oracle.com/technetwork/OEM/grid-control/downloads/index.html

  http://www.Oracle.com/technetwork/OEM/grid-control/documentation/index.html

  Concerning
  Rajesh

• Using the Grid control with the ALLOWED_LOGON_VERSION parameter

  Hello
  
  We use a 10.2.0.4 database and a 10.1.2.3.0 grid control (with its own 10.2.0.4 database) and WHO and the database are patched up to April 2010 CPU. We tried setting the SQLNET. ALLOWED_LOGON_VERSION = 10 in the SQLNET.ora of the database, but it seems as if the control grid or the agent cannot connect to the database. This is the error that we received from the grid if the parameter is active.
  ORA-28040: no authentication protocol matching (DBD ERROR: OCISessionBegin).
  
  I found no information on activate or not the ALLOWED_LOGON_VERSION if a grid control is followed by a database.
  
  Someone had this problem before?
  
  Thank you
  Francis

  Francis,
  I googled on "SQLNET. ALLOWED_LOGON_VERSION = 10 ". This leads me to SQLNET. ALLOWED_LOGON_VERSION here is a description of the bug 6051243. Seaching on My Oracle support for this bug led me to the notes 466939. Looks like you're running in this bug.
  Note 755605.1 gives you some solutions.

  Eric

• the stream using the grid 10.2 control configuration

  can configure us the flow through the grid control 10.2? Please let me know the step by step workflow configuration.
  
  Thank you.

  Grid control has a wizard that allows you to configure the table, a schema or database replication complete. You can use the wizard to generate a script for the configuration, ask well. There are some resources available online covering the wizard of replication and monitoring of streams in general with EM.

  For example, there is an annotated presentation (Grid Control 10.2.0.5: workflow management) which describes the pages EM streams and how to use them. Link: http://download.oracle.com/docs/cd/E11882_01/server.112/e10703/tdpii_repcont.htm

  There is also an Oracle by example (OBE) demonstrating 11.2 management DBControl Brooks walking through the wizard configuration and replication and monitoring. Link: http://http//www.oracle.com/technology/obe/demos/11gr2/streams11_2/streams_and_em/streams_and_em_viewlet_swf.html

  11.2 2 Day + data replication and integration book (Chapter 4) also includes a tour through the pages of stream DBControl 11.2. Link: http://download.oracle.com/docs/cd/E11882_01/server.112/e10703/tdpii_repcont.htm#BABEFAFI

  Published by: pmcelroy on March 30, 2010 19:45

• Upgrade of Management Agents after the upgrade of the grid to 10.2.0.5 control

  Hello:
  
  I'm pretty new to the implementation of the grid control. I've seen given the task of updating the Grid control to 10.2.0.5. I upgraded successfully to 10.2.0.5 GC. Now, the next task is to upgrade current enforcement Agents on other nodes of the database. I have 6 databases running on Solaris 9.0, few of them running on RHEL 5.0 x 86, a few of them on RHEL 5.0 86 * 64. I'm looking to upgrade these agents in a single shot. Is there a way I can accomplish this grid control. If this is the case, then I download and upload the patchsets for 10.2.0.5 for various platforms in the Grid control.
  
  I would be very happy if you could give me valid pointers that help me understand and go further.
  
  Kind regards
  
  Bala

  Yes you can upgrade the agent to a single shot. Refer to the following OBE

  http://www.Oracle.com/technology/OBE/obe10gemgc_10204/agentpatch_upgrade.htm

• strange behavior in the planning of a script in the grid control

  I have a script that works fine when I run it manually and through cron.it datapump exports.
  I created jobs in the grid as operating system command and control as a script of the os type.
  However when I schedule it's running in the grid control as a task, the task has failed
  .sh: line 17: 4274 Abort (core dumped)
  
  It exceutes all the lines of the os script except core dump/abort (line 17) which is
  $ORACLE_HOME/bin/expdp
  
  **********************************************************************************************************************
  
  Grid control is 11 GR 2 and it's on Solaris10.
  
  

  It depends on what shell you use.

  Please try

  LD_LIBRARY_PATH_64 =""

  Export LD_LIBRARY_PATH_64

• Cannot start the grid control

  Hello
  
  I got the grid control Setup on a server laboratory almost a year back and everything worked very well.
  a week back from the developer could not access the URL.
  
  
  While I try to start the services, I get the following error:
  
  xvmdsxaor03: / opt/oem/oms10g/opmn/bin >. / opmnctl startall
  opmnctl: from opmn and managed all process...
  =========================================================================
  opmn id = xvmdsxaor03:6200
  0 out of 1 process started.
  
  IAS instance-id = EnterpriseManager0.xvmdsxaor03
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  IAS-component/process-type/process-set:
  HTTP_Server/HTTP_Server/HTTP_Server
  
  Error
  -> Process (pid = 1382)
  Cannot start a process managed after the attempt limit maximum
  Journal:
  / opt/OEM/oms10g/opmn/logs/HTTP_Server ~ 1
  
  xvmdsxaor03: / opt/oem/oms10g/opmn/bin > 10 g/opmn/logs/HTTP_Server ~ 1
  ========================================================================
  
  
  According to the newspapers:
  ========================================================================
  06/09/23 07:59:55 start
  --------
  apachectl does not belong to this user
  ========================================================================
  
  I checked for .apachectl and its property by the same user "oraoem" that I m starting services with. I'm not sure what is causing this problem:
  
  [root@xvmdsxaor03 bin] # ls-l .apache *.
  -rwsr-s - 1 oraoem s/n 1716966 5 August 2005 .apachectl
  [root@xvmdsxaor03 bin] # pwd
  / opt/OEM/oms10g/Apache/Apache/bin
  
  Please notify.
  
  Thank you!

  What are you user to use 'startall opmnctl?

  Ok...

  Please...

  $. / opmnctl stopall

  $ ps - aef | grep oms10g

  And then if find some process... Kill it to superuser.

  # kill-9 ID_processus

  OR (be careful)
  # ps - aef | grep oms10g | AWK '{print $2} ' | XARGS kill-9

  Go to/opt/oem/oms10g/Apache/Apache/logs PATH

  # cd/opt/oem/oms10g/Apache/Apache/logs PATH

  Check the file httpd.pid

  # ls - the httpd.pid

  It must not be permission oracle, don't mind... verification process and remove

  # ps - aef | grep 'cat httpd.pid '.

  If find... kill

  # rm f httpd.pid

  Oh apachectl file (it is owned by oracle)

  -rwx - 1 oracle oinstall 12615 10 May 2007 apachectl

  After that the oracle Goto user, and then use 'startall opmnclt.

  $. / opmnctl startall

  and check the log

  Good luck