Upgrade of Management Agents after the upgrade of the grid to 10.2.0.5 control

Similar Questions

• Not able to install Management Agent on the server no - WHO, different platform

  Hello
  
  I run 12.2 of the WHO on a Linux platform and must make a 64-bit Windows Server a target managed by getting the installed Management Agent.
  
  The Agent software for the server to Win 64-bit platform has been downloaded using the console auto update. However, I can't add the target host because it maintains have reported that I have selected a platform for which software Management Agent is not available on the WHO and I want to use the update auto etc.
  
  So, after that I downloaded the agent software for Windows 64-bit at WHO, using the self updated fucntion, in the list of the software updates Agent, I see:

  Downloaded  |  Microsoft Windows x64 (64-bit)  |  12.1.0.2.0  | Oracle  |  Agent Software ...

  and when has highlighted in the past, activities list it shows shares"available"and then "Download", both with the status of successful operation.
  
  So now, I'm going to: Setup - Add Target - add targets - manually add hosts
  I add an entry, fill in the IP address and choice of platform (win 64-bit), but the platform name is added with * "Unavailable software Agent" * then recommend me again to download the software for this platform using auto update !
  
  Just in case, I made a new connection in the OEM but which did not help.
  
  Can anyone suggest me please an action plan to "fix" it?
  
  Thank you very much!
  Ed

  Hello

  After downloading the software agent, do you have one apply?

  If not, then pls do more...

  Setup > extensibility > auto update > click agents

  in "actions" drop-down menu, select apply.

  You can always check the software available in your OMS agent using emcli.
  Use this command to get the list of the avlble

  emcli get_supported_platforms

• My right click menu is missing after the use of security of Kaspersky application control settings.

  Right click menu disabled

  My right click menu is missing after the use of security of Kaspersky application control settings.

  My right click menu is missing after the use of security of Kaspersky application control settings.

  This tutorial will help?

  Context menu - enable or disable

  http://www.Vistax64.com/tutorials/140508-context-menu-enable-disable.html

  Option One is the easiest.

• failure to update bundle Dell Open manage offline after the ESXi 4.0 upgrade to ESXi 4.1

  Hi all

  My service manage Open Dell failed on my Dell Power Edge Server after the upgrade to ESXi 4.0 to ESXi 4.1. I know that I need to update the bundle off line Dell manage open to a newer version to run on ESXi 4.1. However, everything I did on updating bundle Dell Open manage, it just gave me the below error:

  C:\temp\2 > "c:\Program Files (x 86) \VMware\VMware vSphere CLI\bin\vihostupdate.pl"-Server 172.16.3.28-i b OM-SrvAdmin-Dell-Web-6.3.0-2075.VIB-ESX40i_A00.9.zip

  Enter the user name: root

  Enter the password:

  Please wait install the fix is underway...

  No ballots or VIB were found in the metadata. No bulletin for this dish

  form could be found. Nothing to do.

  I know that the command is correct I can install correctly the Bundle open offline manage a FRESH ESXI 4.1 Installation on a test server. However, I do not want to and cannot start early on my production server. An idea to work around this problem is especially welcome!

  There is an another vib for ESXi 4.1.  Try to install OMSA go http://ftp.dell.com/sysman/OM-SrvAdmin-Dell-Web-6.3.0-2075.VIB-ESX41i_A00.8.zip.

• Find the status of the Agent of the grid from the grid control repository

  Hello
  
  I need help on the extraction of repository of grid control. My database of the Grid control is 10.2.0.5 on Solaris 64-bit.
  In grid control, there is a report in the reports (installation of Enterprise Manager-> Agent information) tab that displays the status of all agents configured. I have the similar requirment but I will be filtering based on certain criteria and other factors, so I need a query sqlplus to extract information from the repository grid agent base of databases.
  Can someone please help to get information from the OMS using SQL repository Agent * MORE
  
  Kind regards
  Ajay

  Hi Ajay,
  Do you mean something like:
  SELECT
  M.TARGET_NAME, M.START_TIMESTAMP, M.AVAILABILITY_STATUS
  OF SYSMAN. MGMT$ AVAILABILITY_CURRENT M
  WHERE Mr. TYPE_DISPLAY_NAME = "Agent".
  AND M.TARGET_NAME NOT in ('erereeer', 'Scott', 'qwdasdasd')

  Eric

• License Manager Windows after the shipment to another country

  Is a compatible American society, with regard to the award of licences, if they buy some machines with Windows 7 OEM installed and embark on Latin America for use in the offices of the child? Or the offices of the child in these countries made a mistake to buy under their own name?

  Thank you

  There is no geographic restrictions on licenses for Windows retail or OEM preloaded purchased in the United States to be used in other countries.

• Management errors in the grid lines

  I am designing a good system for a project of management errors, I'm working on, but I encountered a problem of 'design '. I thought it would be good to ask some advice here before I sit down and start creating the system of error handling.

  I have more than one Subvi started from a mainVI, each Subvi with an individual while loop running (they all stop when I press the same button the mainVI stop). Each one while loop retrievews information of various series equipment permanently. Each call VISA etc. can generate of course mistakes. I want only an error dialog box in my mainVI display panel any error that occurs.

  How would this design in a good sense? As I see it, I have to use the error dialog box in the mainVI as a global/functional overall. Each Subvi will then write to this global error dialog box. This could however cause race conditions where only the last error gets poster, even if the previous mistakes that happened. Enjoy good advice here.

  You could create a separate VI which is a loop that is waiting in a queue. Whenever an errro occurs in one of your tasks, they could display a message to the error queue. The generalized error handler would be to dequeue the message and then he could save, display a message, initiating a system shutdown, or whatever. The key here is using queues to pass messages between your loops.

• A host is not on the list of targets after the agent is installed correctly.

  We assume that:
  
  «You cannot add host targets or objectives of Agent using the Grid control pages.» Instead, these types of targets appear automatically in the control of the grid after the Oracle Management Agent installed on a host computer. »
  
  And so far had been true.
  
  However, I have a problem with the installation of an agent. Despite be installed correctly and communicate with the agent, it is not displayed in the target list.
  
  Any ideas?
  
  
  c:\oracle\product\grid\agent11g\BIN > emctl agent status
  Oracle Enterprise Manager 11 g Release 1 control Grid 11.1.0.1.0
  Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
  ---------------------------------------------------------------
  Agent version: 11.1.0.1.0
  Version of the WHO: 11.1.0.1.0
  Protocol version: 11.1.0.0.0
  Agent home: C:\oracle\product\grid\agent11g
  File binary agent: C:\oracle\product\grid\agent11g
  Agent process ID: 184
  Agent URL: https://CA20xxx.xxx.es:3872/emd/main /.
  URL of repository: https://asexxx.xxx.es:4900/em/upload
  Started at the: 2011-11-08 18:15:32
  Started by user: SYSTEM
  Last reload: 2011-11-08 18:15:32
  Last download successful: 2011-11-08 18:16:47
  Total megabytes of XML files uploaded so far: 0.01
  Number of XML, waiting for loading files: 0
  Size of the XML files in the upload wait (MB): 0.00
  Available disk space on the file upload system: 58.60%
  Last attempt heartbeat to WHO: 2011-11-08 18:28:52
  Last pulse in SGD: 2011-11-08 18:27:51
  ---------------------------------------------------------------
  Agent is running and ready

  Hello

  Try this.

  Stop agent

  * Delete files in $ORACLE_HOME/sysman/emd/State and $ORACLE_HOME/sysman/emd/upload

  * clearstate agent

  * Agent unsecured

  * Sure agent

  starting agent

  Download the agent

  Concerning
  Jomon

• Restart the Management Agents + ESXi

  Is it possible to restart the Management Agents in ESXi from a method of SDK or cmd - left?

  As far as I know, vmware-vpxa service is the Agent of VMware vCenter. Management agents are the mgmt-vmware service which you cannot restart (yet) with PowerCLI.

  Best regards, Robert

• installation of the agent on the vmware ESX Server

  Hi, im trying to install the agent 2.7.6 on an esx server of vmware 3.01, somehow, the agent does not connect to the administration server, I opened the ports on the firewall of esx with esxcfg-firewall - openport port 7443 and 2144 but I still can not the agent to connect to the management server... everything I forget?
  
  Rgds

  Hi Nicky,

  We will clear up the confusion of port for the next version.  Regarding
  availability be yellow, I believe that it is through the combination
  the VMware API in 3.0 is much slower than ESX 2 times 20
  VMS exposes this recently fixed issue: http://jira.hyperic.com/browse/
  HHQ-437

  You can find a patch fixed the issue that should solve your
  lights of availability.  Let us know if that helps.  It is also possible
  to reduce the memory usage by disabling the plugins that vmware
  Buy adding to agent.properties:

  plugins.include = VMware

  You can also change the max heap size in agent.properties:
  agent.javaOpts =-Xmx128m

  On 15 January 2007, at 03:52, Haan Nicky wrote:

  > okay... It's already better... but first, autodetect didn t
  > work for hyperic settings, when you try to set it to 0 for the port.
  > He complains the port must be between 1 and 65535.
  > change the settings on the execution of the agent already has failed
  > either, so I killed the admin machine and deleted data
  > folder on the computer of the agent, after the reset and the
  > the right credentials and port 443 (Please note that the)
  > authd.client.port is 902... and not 443, check/etc/vmware/config
  > for this authd.client.port = '902', so I obviously thought that of
  (> What is necessary in the settings, maybe just state port 443 here?) I have
  > then started the inventory, which is quite long (10 minutes) and
  > memory and CPU was quite up on the esx Server (this is a double quad
  (> xeon machine with 16 concerts and about 20 vitrual machines running)...
  > the agent runs now, but somehow I think that the moment a large number,
  > availability is always on the yellow... I think that the agent
  > must refine even more here... on an esx 3.0 server there are only
  > 1 cpu and limited memory available for the linux Machinehote...
  > maybe it's not enough for the agent?
  >

• Does not after the resumption of the hibernation

  Hello. I have laptop very slow and unresponsive liked after the resumption of the hibernation. It lasts up to 15 minutes after the resumption and the HDD led is lit constantly during this process. It's a much slower RESUME that my very old laptop with Pentium M processor and hard drive slow 540 RPM.

  What can we do about it.

  Laptop: Lenovo X 220, core i5, 8 GB RAM, 7200 RPM HARD drive. Windows 7 Pro x 64.

  I have a kind of guess the reason - a lot of RAM on x 64. Hiberfil large file. BUT I do not notice this behavior on any computer I've owned or worked on. That they can resume more slowly or more quickly, but after the restart they are responsive as they where before hibernation. I'd rather have it on the laptop too. This laptop isn't, she continues to make the reading of the HARD drive making it absolutely unusable during the process of tis.

  Thank you.

  Thanks again.
  The process that caused strange behavior has been PWMTR64.dll which is a ThinkPad Power Manager background service. Turn it off solved the problem. Resume from Hibernate is normal and all programs are loaded immediately after the resumption. Haven't noticed any decline in the power management feature after the deactivation of this startup item in msconfig.

• Problem with implementation of Weblogic 10.3 after the change of username password

  I am facing problem with bringing Weblogic 10.3 after the change of username password in the field of safety Madhok, basically, I have deleted the user weblogic default and set m, y custome own user and provide credentials in the server start tab. When I try to bring up the administrator of the server it is, but managed servers fail from the administration console and I see security credentials for authentication error in newspapers? Why who would consider that the server administrator is able to provide the same credentials.
  
  Priya - malgouyres
  Systems architect
  InterAlliance Group Services
  http://www.interalliancegroup.com

  We had the similar problem in the past, our problem is:
  Problem:
  We have removed weblogic default security domain user and create a new user when Manager nodes and managed servers declined. When we try to put in place managed servers after the starting node Manager we continue get refused authentication errors.

  Solution:
  Recreate the user weblogic now try and implement servers managed from the command line using weblogic user. Once they are up to tap them down and bring them to the top again with the new user you created and it will work

  Reason:
  The 10.3-managed servers seems to store the local credentials he managed ldap or cache servers. When you start managed servers don't know the new information of identification and authentication performed against the old values of credentials stored, where they fail. Once they are started with the information identification old they communicate with the admin servers to sync it hides with admin servers and new identification information is updated and then you can restart the servers managed with the new credentials.
  Note: Sometimes after reboot you can meet the problem as the synchronization with the administration server process is asynchornous, weblogic prints a line saying something like asynchronous operation with the null Server address. If the line is printed sync has arrived and you're good. In case you do not see the line to reboot once again and you will see the line after which you can restart with the new credentials.

• strange behavior in the planning of a script in the grid control

  I have a script that works fine when I run it manually and through cron.it datapump exports.
  I created jobs in the grid as operating system command and control as a script of the os type.
  However when I schedule it's running in the grid control as a task, the task has failed
  .sh: line 17: 4274 Abort (core dumped)
  
  It exceutes all the lines of the os script except core dump/abort (line 17) which is
  $ORACLE_HOME/bin/expdp
  
  **********************************************************************************************************************
  
  Grid control is 11 GR 2 and it's on Solaris10.
  
  

  It depends on what shell you use.

  Please try

  LD_LIBRARY_PATH_64 =""

  Export LD_LIBRARY_PATH_64

• Have Photoshop 7.0.1 - recently left economy as or save pictures after the changes. Just hangs until I have kill the process with the Task Manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC I hate subscription servic

  Just hangs until I have kill the process with the Task Manager. Have uninstalled and reinstalled. Any suggestions? I don't want to upgrade to CC because I hate subscription services and I often internet connection services interuppted.

  What operating system do you use?

  Reset the photoshop preferences could cure the problem.

  Press and hold down the Shift + Ctrl + Alt keys right after the beginning of the launch of photoshop 7

  (Shift-command-Option on mac)

  Keep possession of the keys down until you get a dialog box asking if you want to delete the adobe photoshop settings file

  Press Yes

• HP Support Assistant broke up shortly after the upgrade to windows 8

  I use a 4 month old desktop HP Pavilion HPE h9-1130 Phoenix, with windows 8 pro (64-bit). There are 2 or more months, I upgraded to windows 7 (64-bit), and I followed the instructions of the windows Upgrade Wizard 8. He said not to uninstall HP support assistant, so I left. After the upgrade, which went through flawlessly, hp support Assistant works perfectly. But a few weeks or months, he ran an update, and update failed to start and the program crashed. Immediately after that, the icon of Wizard support hp in the taskbar has disappeared, as well as the program itself. It will be displayed on the list of programs, but I'm not able to uninstall or do something with it. I can't either start. I tried to get help from HP customer care, but they were a bunch of idiots who just wasted my time. I couldn't even communicate with them, because they were all Indians and speaks very by the English. I tried to ask to speak with a customer support English agent or a Manager, but they would put me on hold and it would never transfer, so I hung up. I think I spoke to 6 different customer support agents a few week spans and via different outlets (live chat, phone, email). One of the "agents of support" has been so incompetent that he spent an hour on the remote just link sitting there, doing repetitive things I told him constantly, I had already tried, like trying to do a base installation of the Web-_-... That said, I was wondering if someone could help me solve the problem, because I would like to have Deputy support back on my computer. But I am doing nothing tedious as a reinstallation of windows or something like that, because it's just ridiculous for a program very little relevant.

  Resolved, by none other than myself. No, thanks to HP customer care, or this forumn. Of a curious, I uninstalled a crap tone of the files and folders that are associated with HP Support Assistant, including HP, frame Support HP, HP Setup, HP Setup Manager support and many other files via Windows Explorer (by searching appropriate tab of the computer), Windows uninstaller and Revo Uninstaller free control panel. Once I felt I had managed to get rid of a bunch of broken files of shit, I tried to install a new HP SA on their site, but it wouldn't work. To fix that, I found that guests "Overwriting" mentioned above has led to the problem, which was "swsetup" and HP SA files have been left and prevented a clean install.  So to fix that, I deleted all pre-existing swsetup and files HP SA from Windows Explorer. After all this, I was able to successfully install SA HP, although I had to download it and then manually start the installation process by clicking on the executable file of the application in the new HP SA folder. Everything seems to work fine now, I ran pretty much all the features of the program and they work fine.  The only thing that seems to be a bit weird is that I updated the original HP Bluetooth driver and rebooted, but it seems not to save the update, as it is still prompting me to do it again.  This isn't a big deal, as an easy solution is just for x on this recommended update and hide.   I will update if something happens, but if I don't update, it means that the product works as it should.  Let's hope I don't have to deal with HP customer support once again, what a terrible experience!